More From Contributor

Connect another device to your existing RAM® Mount with the RAM-B-273U Ball Base Adapter. This ball is made up of a 1" / 25 mm ball connecting to a 1/4"-20 threaded stud with a length of 1.6" / 4 cm. The threads on this ball replace the bolt in any B-size socket arm (not included), & the ball connects to the middle of the socket arm on the opposite side of the tightening knob. If you are looking to mount more than one device but cannot locate multiple mounting points on your motorcycle or vehicle, this base is the ideal accessory for connecting both devices off of one mounting base. Features Replace the bolt in any B size double socket arm (not included) to add another 1" / 25 mm B size RAM® rubber ball to your mounting setup Included B size 1" / 25 mm RAM® rubber ball allows for connection to any B size RAM® double socket arm, ball & socket technology allows for near-infinite adjustability made from powder-coated, marine-grade aluminum for durability & reliability in the most dem... ...

Available

The RAM-B-238U ball base consists of a 1" / 25 mm B size rubber ball connected to a 2.43" x 1.31" / 6.2 x 3.3 cm diamond plate. The diamond plate features two holes that measure 1.912" / 4.85 cm from center to center, matching the industry-standard AMPS hole pattern. This diamond ball base is compatible with a wide variety of RAM® device holders & cradles. Features Diamond plate features industry-standard AMPS hole pattern & measures 2.43" x 1.31" / 6.2 x 3.3 cm Compatible with several RAM® device holders & cradles, ball & socket technology allows for near-infinite adjustability made from powder-coated, marine-grade aluminum for durability & reliability in the most demanding environments

Dimensions Hole pattern 2-hole AMPS: 1.912" / 4.85 cm B size Ball 1" / 25 mm Base size 2.43" x 1.31" / 6.2 x 3.3 cm, diamond shaped Weight Capacity Standard use: 2 lbs / 900 gr. Heavy-duty use: 1 lb / 450 gr.

...

Available

The RAM-B-202U consists of a 1" / 25 mm B size rubber ball connected to a 2.5" / 5 cm diameter round plate. This mounting component

Includes:: pre-drilled holes using the universal AMPS hole pattern. Features 2.5" / 5 cm round plate connects to RAM® device holders containing the universal AMPS hole pattern Included B size 1" / 25 mm RAM® rubber ball allows for connection to any B size RAM® double socket arm, ball & socket technology allows for near-infinite adjustability made from powder-coated, marine-grade aluminum for durability & reliability in the most demanding environments

Dimensions Hole pattern 4-hole AMPS: 1.181" x 1.496" / 3.0 x 3.8 cm Hole pattern 3-hole 120-Degree: 1.812" / 4.6 cm diameter B size Ball 1" / 25 mm Base diameter 2" / 5 cm Weight Capacity Standard use: 2 lbs / 900 gr. Heavy-duty use: 1 lb / 450 gr.

...

Available

The RAM-B-347U base consists of a B size 1" / 25 mm diameter rubber ball connected to a 2" x 1.7" square base. The base has four pre-drilled holes at each corner, using the universal AMPS hole pattern. Features 2" x 1.7" / 50 x 43 mm square ball base features industry-standard AMPS hole pattern with four pre-drilled holes at each corner Included B size 1" / 25 mm RAM® rubber ball allows for connection to any B size RAM® double socket arm, ball & socket technology allows for near-infinite adjustability made from powder-coated, marine-grade aluminum for durability & reliability in the most demanding environments

Dimensions Hole pattern 4-hole AMPS: 1.181" x 1.496" / 3.0 x 3.8 cm B size Ball 1" / 25 mm 2" x 1.7" / 50 x 43 mm square ball base Weight Capacity Standard use: 2 lbs / 900 gr. Heavy-duty use: 1 lb / 450 gr.

...

Available

The RAM-B-231-2 consists of a 1" / 25 mm diameter rubber ball connected at right angles to a base that contains a flexible metal strap. The strap base tightening screw is encased in a compact housing for a clean, safe finish. The strap is long enough to wrap around handle bar posts found on most ATV, UTV, Snowmobiles, Motorcycles & any other applications you can think of. Features Included B size 1" / 25 mm RAM® rubber ball allows for connection to any B size RAM® double socket arm, ball & socket technology allows for near-infinite adjustability made from Powder-coated, marine-grade aluminum for durability & reliability in the most demanding marine environments Hardware included 1 strap clamp adapter 2 1/4"-20 x 1" machine screws 2 1/4"-20 Nylock nuts 1 Zinc worm drive strap clamp 1 6" rubber strip 1 1/4"-20 U-bolt for 0.5"
- 1" rails 2 rubber caps 1 U-bolt spacer

Dimensions B size Ball 1" / 25 mm Strap clamp diameter 1.57"
- 3.15" / 40
- 80 mm Weight capacity Standard use: 2 lbs /...

...

Available

The RAM-B-309-1U attaches to your motorcycle s handlebar clutch/brake clamp & features one B size 1" / 25 mm rubber ball. The base fits the control clamps on your motorcycle with 40 mm x 6 mm stainless steel hardware, provided in the kit. To see if the RAM-B-309-1U base is compatible with your motorcycle, check the hole spacing of the base against your clutch/brake reservoir. The hole centers have a minimum width of 0.94" / 24 mm & a maximum of 1.58" / 40 mm. Features Connects to your handlebar clutch/brake clamp with provided 40mm x 6mm stainless steel hardware Included B size 1" / 25 mm RAM® rubber ball allows for connection to any B size RAM® double socket arm, ball & socket technology allows for near-infinite adjustability made from Powder-coated, marine-grade aluminum for durability & reliability in the most demanding marine environments Hardware included 2 M6 x 55 mm hex bolts 2 1/4-20 x 2" hex bolts 2 1/4"-20 x 2.5" hex bolts 2 1/2" spacers 2 1/4" split lock washers Dimen... ...

Available

The RAP-B-200-2U consists of double 1" / 25 mm B size diameter open sockets with a 360-degree center rotation point & a connecting 180-degree swivel joint. The central pivot point provides unsurpassed adjustability for 1" / 25 mm B size ball bases, device holders, & adapters that are connected via the sockets. Features Double socket swivel & ratchet arm features 360-degree center rotation & 180-degree swivel joint with an overall length of 6.25" / 159 mm & a socket-to-socket length of 5.5" / 140 mm Attaches to any B size RAM® ball component, including mounting bases & device holders Double ball & socket technology allows for near-infinite adjustability of your RAM® mounting system

Dimensions Ball size B 1" / 25 mm Socket distance 5.5" / 140 mm Overall length 6.25" / 159 mm Weight capacity Standard use: 2 lbs / 900 gr. Heavy-duty use: 1 lb / 450 gr.

...

Available

The RAM-B-230 double ball adapter consists of two attached B size 1" / 25 mm rubber balls that allow the connection of two B size double socket arms. When measured from ball center to ball center, the length is 1.75" / 4.5 cm. Features The perfect adapter for connecting two B size RAM® Mounts double socket arms for extra extension or articulation Consists of two B size 1" / 25 mm RAM® rubber balls connected by a. 75" /19 mm length post Post is made from powder-coated, marine-grade aluminum for durability & reliability in the most demanding environments

Dimensions Ball size B 1" / 25 mm Socket distance 1.75" / 45 mm Overall length 2.54" / 65 mm Weight capacity Standard use: 2 lbs / 900 gr. Heavy-duty use: 1 lb / 450 gr.

...

Available

The RAP-B-378U consists of a 2.5" / 5 cm composite B size ball base, double-sided adhesive PSA stick pad, & sealed alcohol prep pad. This base will attach to all RAM® B size double socket arms, allowing you to connect a compatible device holder. Features Flex adhesive ball base provides a strong mounting surface in a wide variety of use cases, such as a vehicle dash Included B size 1" / 25 mm RAM® rubber balls allows for connection to any B size RAM® double socket arm, ball & socket technology allows for near-infinite adjustability made from high-strength composites for durability & reliability in the most demanding environments

Dimensions Base diameter 2" / 5 cm B size Ball 1" / 25 mm Weight capacity Standard use: 2 lbs / 900 gr. Heavy-duty use: 1 lb / 450 gr.

...

Available

The RAM® motorcycle fork stem base is one of the cleanest & most popular solutions for mounting your favorite device on the center of your bike. Featuring a B size 1" / 25 mm rubber ball, this part is designed to fit into the cylindrical bore wall of fork stems & will work with stems that measure 12 mm to 38 mm (.5” to 1.49”) in diameter. Hardware included 1 expansion plug for 12 mm
- 38 mm (.5"
- 1.49") fork stem holes 1 M5 x 60 mm machine screw 1 steel washer set 1 nut pocket washer set 1 brass Nylock nut Features Designed to fit into the cylindrical bore wall of fork stems Included B size 1" / 25 mm RAM® rubber ball allows for connection to any B size RAM® double socket arm, ball & socket technology allows for near-infinite adjustability made from powder-coated, marine-grade aluminum for durability & reliability in the most demanding environments

Dimensions Range 12 mm
- 38 mm (.5"
- 1.49") fork stem holes B size Ball 1" / 25 mm Weight capacity Standard use: 2 lbs / 900 gr. He...

...

Available

Ram Mount Brake/Clutch, Ball Mount

The RAM-B-309-2U connects to your handlebar clutch/brake clamp, left or right side, and holds two 1" / 25 mm diameter mounting ball. The ball that is connected between the hole centers is removable. The base fits the control clamps on your motorcycle with 40 mm x 6 mm stainless steel hardware, provided in the kit. To see if the RAM-B-309-2 base will mount to your motorcycle, check the hole spacing of the base against your clutch/brake reservoir. The holes centers have a minimum width of 0.94" / 24 mm and a maximum of 1.58" / 40 mm. Features Combination brake/clutch reservoir base for motorcycles with two mounting balls Included B size 1" / 25 mm RAM® rubber ball allows for connection to any B size RAM® double socket arm, ball and socket technology allows for near-infinite
adjustability Made of Powder-coated, marine-grade aluminum for durability and reliability in the most demanding marine environments Hardware included 2 M6 x 55 mm hex bolts 2 1/4-20 x 2" hex bolts 2 1/4"-20 x 2.5" he...

Availability: In Stock
Supplier: Motoin SE
SKU: se-11074605-001

Description Reviews / Comments Add New

Product Description

The RAM-B-309-2U connects to your handlebar clutch/brake clamp, left or right side, & holds two 1" / 25 mm diameter mounting ball. The ball that is connected between the hole centers is removable. The base fits the control clamps on your motorcycle with 40 mm x 6 mm stainless steel hardware, provided in the kit. To see if the RAM-B-309-2 base will mount to your motorcycle, check the hole spacing of the base against your clutch/brake reservoir. The holes centers have a minimum width of 0.94" / 24 mm & a maximum of 1.58" / 40 mm. Features Combination brake/clutch reservoir base for motorcycles with two mounting balls Included B size 1" / 25 mm RAM® rubber ball allows for connection to any B size RAM® double socket arm, ball & socket technology allows for near-infinite adjustability made from Powder-coated, marine-grade aluminum for durability & reliability in the most demanding marine environments Hardware included 2 M6 x 55 mm hex bolts 2 1/4-20 x 2" hex bolts 2 1/4"-20 x 2.5" he...

Reviews/Comments

Add New

Jargon Buster

RAM - Random Access memory

Stainless steel - A stain and corrosion resistant steel blend

Diameter - A measurement across a circle passing through the middle

Steel - An alloy made predominately of Iron combined with <2% carbon

rubber - Synthetic rubber is any artificial elastomer, usually a polymer, and is used as a substitute for natural rubber.

rubber - Natural rubber is an elastomer derived from the latex containing sap of some plants.

Size - is the measurement of how big an object is in space.

Powder - a object formed from many tiny pieces.

Width - The measurement of something from one side to the other.

Combination - The process of two of more things being mixed or combined together.

More From Contributor

Ram Mount Brake/Clutch, Ball Mount

Product Description

Reviews/Comments

Add New

Intelligent Comparison

Price History

Vouchers

Facebook

Jargon Buster

Supplier Information

Community Generated Product Tags

Contact Us

Information

My Account