Optimate PRO-8, 8-Channel. The 8-channel battery care center recommended by motorsports original equipment manufacturers for salvaging, charging & testing all 6V & 12V batteries, including neglected sulfated/low voltage batteries. Features Selectable charging voltage
- select 6 V or 12 V battery voltage for each bank. Fully automatic
- No selection required, no battery knowledge needed! Connect up to 8 x 6 V & 12 V batteries & let the charger do the rest! Banks/charging stations: 8 (each bank works independently) Charging current: (per bank): 1 A USE: rooms/workshop environment (lowest temperature: -20 °C) Rescue: start with low voltage of 1.8 V + 1-stage desulfation rescue Ideal for: STD, AGM & GEL 6 V or 12 V batteries of 2 Ah INPUT: Selectable 110-120 VAC / 220-240 VAC 50-60 Hz, with main switch & replaceable fuse Construction: Ventilated industrial table-top case with wall mount (TS-218), 180 cm power cord & 8x 180 cm charging cables with SAE connectors 8x standard battery terminal set included Safety No risk of overcharging Spark suppression Safe for long term battery maintenance Automatic shutdown in case of short circuit or disconnected battery

...

Opti MATE cable O-23. 10 Amp low temperature charging cable extension with weather & dirt protected SAE connection system. Features Length: 460 cm Industry standard 2-pin SAE connector Cable standard: 16 AWG (1.31 mm 2) SPT-2W Max. cable load: 5 A Use at very low temperatures: down to -40 °C Cable remains flexible at sub-freezing temperatures With rubber cable seal for Opti MATE heavy-duty SAE connection High quality cable, developed by Tec Mate ...

5 Amp low temperature charging cable extension with weather & dirt protected SAE connection system. Features O-03 length: 180 cm / 6 ft O-13 length: 460 cm / 15 ft O-33 length: 100 cm / 40 inch Industry standard 2-pin SAE connector Max. Cable load: 5 A Use at very low temperatures: down to -40 ° C Cable remains flexible at sub-freezing temperatures

Includes:: an in-line rubber gasket for the Opti MATE high performance SAE connector High quality cable, designed by Tec Mate

...

5 Amp low temperature charging cable extension with weather & dirt protected SAE connection system. Features O-03 length: 180 cm / 6 ft O-13 length: 460 cm / 15 ft O-33 length: 100 cm / 40 inch Industry standard 2-pin SAE connector Max. Cable load: 5 A Use at very low temperatures: down to -40 ° C Cable remains flexible at sub-freezing temperatures

Includes:: an in-line rubber gasket for the Opti MATE high performance SAE connector High quality cable, designed by Tec Mate

...

5 Amp low temperature charging cable extension with weather & dirt protected SAE connection system. Features O-03 length: 180 cm / 6 ft O-13 length: 460 cm / 15 ft O-33 length: 100 cm / 40 inch Industry standard 2-pin SAE connector Max. Cable load: 5 A Use at very low temperatures: down to -40 ° C Cable remains flexible at sub-freezing temperatures

Includes:: an in-line rubber gasket for the Opti MATE high performance SAE connector High quality cable, designed by Tec Mate

...

Opti MATE cable O-04. Battery clamps with Easy-Grip rubber grips, for round, rectangular (motorsport) & flat poles. Features Length: 50 cm 2-pole SAE connection according to industry standard Max. Cable load: 10 A Use at very low temperatures: down to -20° C With rubber cable seal for Opti MATE heavy-duty SAE connection High quality cable, designed by Tec Mate ...

Opti MATE cable O-14. Battery terminals with 15 A fuse, easy-grip rubber grips, specially designed for round, square (Power Sport) & flat battery terminals. Features Length: 50 cm Industry standard SAE 2-pin connector 15 A fuse Max. Cable load: 10 A Low temperature use: down to -40 °C

Includes:: in-line rubber gasket for Opti MATE high performance SAE connector High quality cable designed by Tec Mate

...

Opti MATE cable O-30. Electrify your tank bag or handlebar bag with a cable pass-through or even your fixed luggage cases. Create a weatherproof electrical pass-through from SAE to SAE with a flat profile. Installation is simple. Cut a 14 mm diameter hole through the dedicated crosshair power inlet of your tank bag or handlebar bag, or drill through the hard wall of the case to accept the M14 connector & threaded nut. Custom gaskets are provided for ROUND (Wunderlich) & OVAL (SW Motech) power inputs & for the hard pannier wall. A DC 2.5mm to SAE adapter completes the installation. Features Low profile 90° angle inlet with M14 threaded tube & nylon nut (requires 14 mm hole) Custom seals for ROUND (e.g. Wunderlich) & OVAL (SW Motech) crosshair power inputs & hard pannier wall External SAE 2-pin connector with inline waterproof seal for optional Opti MATE cable adapter Internal SAE 2-pin connector/adapter for USB (Universal Serial Bus) or other device

Includes:: DC 2.5 mm connector to SAE adapter & in...

...

Opti MATE Cable O-27. Reverse the polarity of your SAE 2-pin SAE connector on your standard solar panel & vehicle accessory wiring. Features Length: 15 cm Industry standard 2-pin SAE connector Max. Cable load: 10 A Use at very low temperatures: down to -40 ° C Cable remains flexible at temperatures below freezing point With rubber cable seal for Opti MATE heavy-duty SAE connection High quality cable, developed by Tec Mate ...

Opti Mate O-10 replacement linking shrouds & caps for SAE connectors. Features Fits the Opti Mate two-pin SAE connector plugs



...