More From Contributor

The RAM-HOL-UN7-400U consists of the small Tough-Claw™ base & universal X-Grip® cradle. The X-Grip® cradle has a clean & clever four leg design that sports great holding power without hiding your smart-phone behind foam pads & plastic. The X-Grip® cradle expands & contracts for perfect fit of most smartphones. This mount rotates 360 degrees. The X-Grip®

Includes:: a device tether recommended for outdoor applications. It is important to verify the

Dimensions of your handheld device with a case/sleeve/skin when determining the overall size. Hardware included 1 optional tether 1 glue tube for rubber caps Material High strength composite Stainless steel Cradle/clamp

Dimensions Width range: 1, 875"
- 3, 25" / 47, 5
- 82.5 mm Max.

Depth: 0.875" / 22 mm Clamp range 0.625"
- 1.14" / 16
- 29 mm diameter Ball/socket size RAM Snap-Link 3/4" / 19 mm Weight Capacity Standard use: 2 lbs / 900 gr. Heavy-duty use: 1 lb / 450 gr. Note Exposure to vibrations, like those generated by high-powered moto...

...

Available

Take your mobile entertainment on the road with the new RAM® Torque™ handlebar & rail mounting base, paired with a B-sized 1” rubber ball base that accommodates bars 3/4"
- 1" in diameter with the dynamic X-Grip® for phones. Sizing inserts are included to provide a snug fit & offer additional protection for the rail. The mount utilizes nylon-insert locknuts to prevent loosening in high vibration environments. This low-profile mount is the perfect way to secure your personal electronics & small accessories in any high-vibration environment. The included X-Grip® cradle has a clean & clever four leg design that sports great holding power without hiding your phone behind foam pads & plastic. The spring-loaded X-Grip® cradle expands & contracts, allowing for a perfect custom fit of your cell phone. The perfect complement to the modern sleek interior of today s vehicles, the RAM X-Grip® is the cell phone cradle evolved. The X-Grip®

Includes:: a device tether recommended for outdoor...

...

Available

The RAM-B-149Z-UN7U consists of a zinc coated U-Bolt base, double socket arm & universal X-Grip® cradle. Included in this package is hardware that will accommodate rails from 0.50" to 1.25" in diameter. The base

Includes:: black cover caps to be placed over the exposed ends of the u-bolt. The mount is designed with a RAM 1" / 25 mm diameter patented rubber ball & socket system that has adjustment points at both ends of the double socket arm, this allowing for almost infinite adjustment & perfect viewing angles. The included composite rail adapter can narrow the rail to a minimum width of 0.5" / 12.5 mm. The included X-Grip® cradle has a clean & clever four leg design that sports great holding power without hiding your phone behind foam pads & plastic. The spring-loaded X-Grip® cradle expands & contracts, allowing for a perfect custom fit of your cell phone. The perfect complement to the modern sleek interior of today s vehicles, the RAM X-Grip® is the cell phone cradle evolv...

...

Available

The RAP-SB-187-UN7U consists of the RAM EZ-Strap™ base, double ball SHORT arm & universal X-Grip® cradle. The strap can be cut to fit tubing, square rails & irregular shapes from 0.5" to 2.58" (12 bis 65 mm) in diameter. Multiple adjustment points allow you to move the universal X-Grip® cradle to your optimum viewing position. This mount rotates 180 degrees. The X-Grip®

Includes:: a device tether recommended for outdoor applications. The cradle is compatible with handheld devices that will fit the

Dimensions listed below. It is important to verify the

Dimensions of your handheld device with a case/sleeve/skin when determining the overall size. Material High strength composite Stainless steel Ball/socket size RAM Snap-Link 3/4" / 19 mm Cradle clamping

Dimensions Width range: 1.875"
- 3.25" / 4.7
- 8.2 cm Max.

Depth: 0.875" / 2.2 cm Weight Capacity Standard use: 0, 5 lbs / 225 gr. Note Exposure to vibrations, like those generated by high-powered motorcycle engines, might impact iPhone c...

...

Available

The RAM-B-174-UN10 consists of hardware for mounting to either brake/clutch reservoirs & rails that are 0.5" to 1.25" / 12.5 to 31.5 mm in diameter, double socket arm & universal X-Grip® large phone/phablet holder. Designed into the mount is a 1" / 25 mm diameter patented rubber ball & socket system with adjustment points at both ends of the socket arm, this with a twist of the arm knob, means that you can move the X-Grip® mount to your optimum viewing position. The mounting hardware for brake/clutch reservoirs include both standard & metric mounting bolts. The included X-Grip® cradle has a clean & clever four leg design that sports great holding power without hiding your phone behind foam pads & plastic. The spring-loaded X-Grip® cradle expands & contracts, allowing for a perfect custom fit of your cell phone. The perfect complement to the modern sleek interior of today s vehicles, the RAM X-Grip® is the cell phone cradle evolved. The X-Grip®

Includes:: a device tether recommen...

...

Available

The RAM® Tough-Claw™ is the perfect mounting base for toolless installation & removal on round, square, & odd-shaped rails & bars. The small version of the RAM® Tough-Claw™ can quickly be clamped on rails ranging from. 625" to 1.14" in outer diameter & is ideal for mounting on the yoke of an aircraft, handlebars of bicycles & motorcycles, or even on kayak rails & roll bars. This kit

Includes:: the popular spring-loaded RAM® X-Grip® phone holder, featuring an X design that expands & contracts to provide a perfect fit for your device – even if it s in a case. This large version of the RAM® X-Grip® fits phones ranging from 1.75" to 4.5" in width & keeps your device completely functional & accessible. For outdoor applications, the RAM® X-Grip®

Includes:: a device tether that is recommended for added security & peace of mind. Hardware included 1 optional tether 1 glue tube for rubber caps Material High strength composite Stainless steel Cradle/clamp

Dimensions Width range: 1...

...

Available

The RAM® X-Grip® Large Phone Mount with Low-Profile RAM® Tough-Claw™ (RAM-HOL-UN10-400-2U) consists of the small RAM® Tough-Claw™ base & universal large RAM® X-Grip® phone holder, connected by the RAM® Pin-Lock™ adapter. The large RAM® X-Grip® features an ‘X’ design that expands & contracts to secure your phone, &

Includes:: a device tether recommended for outdoor applications. With the RAM® Tough-Claw™ base connected, easily attach the RAM® X-Grip® on round, square, & odd-shaped rails & bars ranging from 0.625” to 1.5” in outer diameter. It is important to verify the

Dimensions of your handheld device with its case, sleeve, or skin when determining the overall size. Hardware included 1 optional tether 1 glue tube for rubber caps Material High strength composite Stainless steel Cradle/clamp

Dimensions Width range: 1.75"
- 4.5" / 44.5
- 114 mm Max.

Depth: 0.875" / 22 mm Clamp range 0.625"
- 1.14" / 16
- 29 mm diameter Weight Capacity Standard use: 2 lbs / 900 gr. Heavy-duty use...

...

Available

The RAM-B-400-C-UN10U consists of the Tough-Claw™ rail clamp base, long length double socket arm & universal spring-loaded X-Grip® cradle for large phones & phablets. The spring-loaded X-Grip® cradle expands & contracts, allowing for a perfect custom fit of your phone or phablet. Included are easy access grip knobs for quick insertion & release of your handheld device. The Tough-Claw™ rail clamp base is the perfect mounting base for quick & easy tool-less installation & removal on round, square, odd shaped rails & bars. The Tough-Claw™ can be clamped on rails from 0.625"
- 1.14" / 16
- 29 mm outer diameter. Perfectly suited for mounting on the yoke of an aircraft, handlebars & seat posts of bicycles, kayak rails, roll bars & much more, the RAM® Tough-Claw™ will soon become another essential RAM® component in your collection of mounting options. The X-Grip®

Includes:: a device tether recommended for outdoor applications. It is important to verify the

Dimensions of your h...

...

Available

Ideal for handlebars, the RAM-B-149Z-UN10U consists of a zinc-coated U-bolt base, medium length double socket arm, & the popular spring-loaded RAM® X-Grip® large phone holder. In addition, hardware is included to accommodate rails from 0.5"
- 1.25" / 12.5
- 31.5 mm in diameter. The included X-Grip® cradle has a clean & clever four leg design that sports great holding power without hiding your phone behind foam pads & plastic. The spring-loaded X-Grip® cradle expands & contracts, allowing for a perfect custom fit of your cell phone. The perfect complement to the modern sleek interior of today s vehicles, the RAM X-Grip® is the cell phone cradle evolved. The X-Grip®

Includes:: a device tether recommended for outdoor applications. It is important to verify the

Dimensions of your handheld device with a case/sleeve/skin when determining the overall size. Hardware included 1 optional tether 1 glue tube for rubber caps 1 1/4"-20 U-bolt for 0.5"
- 1" rails 1 1/4"-20 U-bolt for 1"
- 1.25"...

...

Available

The popular spring-loaded RAM® X-Grip® phone holder features an X design that expands & contracts to provide a perfect fit for your device – even if it s in a case. made from high-strength composite & stainless steel, the RAM® X-Grip® phone holder is compatible with a wide variety of RAM® double socket arms & mounting bases. This version of the RAM® X-Grip® fits phones ranging from 1.75" to 4.5" / 45 to 114 mm in width & keeps your device completely functional & accessible. No matter what double socket arm & mounting base you pair the RAM® X-Grip® with, RAM® ball & socket technology allows for near-infinite adjustability to achieve the ideal viewing angle – while also extending the life of your phone by providing shock & vibration damping. For outdoor applications – like being used as a motorcycle phone mount – the RAM® X-Grip®

Includes:: a device tether that is recommended for added security & peace of mind. Features Spring-loaded X design with rubber caps sports great h...

...

Available

Ram Mount X-Grip L / Pin-Lock / Tough-Strap, Mounting Kit

The RAM® Tough-Strap™ is lowest profile rugged mounting solution for any bike or motorcycle handbebars. With two different size straps, easily install the RAM® Tough-Strap™ on any mountain bike, road bike or e-bike with a simple twist of a knob. This RAM® Tough-Strap™ Handlebar Mounting kit utilizes the RAM® Pin-Lock™ system to secure the included Large RAM® X-Grip® for a low-profile fitting on your handlebar. The long strap is used for bar diameters ranging from 1.25"-1.38" while the short strap is used for diameters ranging from 0.875"-1". Utilize the extra rubber strip to cut down to the diameter range of 1"-1.125" for a more custom fit. Take the low-profile RAM® Tough-Strap™ on your next adventure on and off the road. Hardware included 1 X-Grip phone holder 1 10-24 x
2" hex bolt 1 long strap 1 short strap 1 long rubber strip 1 short rubber strip 1 tightening knob 1 tether Material High strength composite Cradle/clamp dimensions Width range: 1.75" - 4.5" / 44.5 - 114 mm Max. depth...

Availability: In Stock
Supplier: Motoin SE
SKU: se-11074616-001

Description Reviews / Comments Add New

Product Description

The RAM® Tough-Strap™ is lowest profile rugged mounting solution for any bike or motorcycle handbebars. With two different size straps, easily install the RAM® Tough-Strap™ on any mountain bike, road bike or e-bike with a simple twist of a knob. This RAM® Tough-Strap™ Handlebar Mounting kit utilizes the RAM® Pin-Lock™ system to secure the included Large RAM® X-Grip® for a low-profile fitting on your handlebar. The long strap is used for bar diameters ranging from 1.25"-1.38" while the short strap is used for diameters ranging from 0.875"-1". Utilize the extra rubber strip to cut down to the diameter range of 1"-1.125" for a more custom fit. Take the low-profile RAM® Tough-Strap™ on your next adventure on & off the road. Hardware included 1 X-Grip phone holder 1 10-24 x 2" hex bolt 1 long strap 1 short strap 1 long rubber strip 1 short rubber strip 1 tightening knob 1 tether Material High strength composite Cradle/clamp

Dimensions Width range: 1.75"
- 4.5" / 44.5
- 114 mm Max.

Depth:...

Reviews/Comments

Add New

Jargon Buster

RAM - Random Access memory

Diameter - A measurement across a circle passing through the middle

rubber - Synthetic rubber is any artificial elastomer, usually a polymer, and is used as a substitute for natural rubber.

rubber - Natural rubber is an elastomer derived from the latex containing sap of some plants.

phone - Short for telephone. A device that transmits sound allowing point to point communication over long distances

Size - is the measurement of how big an object is in space.

Large - something that takes up more space than normal.

Adventure - an undertaking of an exciting challenge or experience.

Road - a manmade lane or a path that is used to speed up travel.

Install - A process of putting materials together to create a finished product.

Width - The measurement of something from one side to the other.

Simple - Basic, easy no difficulty in understanding.

Dimensions - The shapes and angles of something or a situation.

More From Contributor

Ram Mount X-Grip L / Pin-Lock / Tough-Strap, Mounting Kit

Product Description

Reviews/Comments

Add New

Intelligent Comparison

Price History

Vouchers

Facebook

Jargon Buster

Supplier Information

Community Generated Product Tags

Contact Us

Information

My Account