More From Contributor

kr688.27 SEK
The RAP-SB-187-UN7U consists of the RAM EZ-Strap™ base, double ball SHORT arm & universal X-Grip® cradle. The strap can be cut to fit tubing, square rails & irregular shapes from 0.5" to 2.58" (12 bis 65 mm) in diameter. Multiple adjustment points allow you to move the universal X-Grip® cradle to your optimum viewing position. This mount rotates 180 degrees. The X-Grip®

Includes::
a device tether recommended for outdoor applications. The cradle is compatible with handheld devices that will fit the

Dimensions listed below. It is important to verify the

Dimensions of your handheld device with a case/sleeve/skin when determining the overall size. Material High strength composite Stainless steel Ball/socket size RAM Snap-Link 3/4" / 19 mm Cradle clamping

Dimensions Width range: 1.875"
- 3.25" / 4.7
- 8.2 cm Max.

Depth:
0.875" / 2.2 cm Weight Capacity Standard use: 0, 5 lbs / 225 gr. Note Exposure to vibrations, like those generated by high-powered motorcycle engines, might impact iPhone c...











...
Available
kr1136.40 SEK
The RAM-B-174-UN10 consists of hardware for mounting to either brake/clutch reservoirs & rails that are 0.5" to 1.25" / 12.5 to 31.5 mm in diameter, double socket arm & universal X-Grip® large phone/phablet holder. Designed into the mount is a 1" / 25 mm diameter patented rubber ball & socket system with adjustment points at both ends of the socket arm, this with a twist of the arm knob, means that you can move the X-Grip® mount to your optimum viewing position. The mounting hardware for brake/clutch reservoirs include both standard & metric mounting bolts. The included X-Grip® cradle has a clean & clever four leg design that sports great holding power without hiding your phone behind foam pads & plastic. The spring-loaded X-Grip® cradle expands & contracts, allowing for a perfect custom fit of your cell phone. The perfect complement to the modern sleek interior of today s vehicles, the RAM X-Grip® is the cell phone cradle evolved. The X-Grip®

Includes::
a device tether recommen...

...
Available
kr814.67 SEK
The RAM® Tough-Strap™ is lowest profile rugged mounting solution for any bike or motorcycle handbebars. With two different size straps, easily install the RAM® Tough-Strap™ on any mountain bike, road bike or e-bike with a simple twist of a knob. This RAM® Tough-Strap™ Handlebar Mounting kit utilizes the RAM® Pin-Lock™ system to secure the included Large RAM® X-Grip® for a low-profile fitting on your handlebar. The long strap is used for bar diameters ranging from 1.25"-1.38" while the short strap is used for diameters ranging from 0.875"-1". Utilize the extra rubber strip to cut down to the diameter range of 1"-1.125" for a more custom fit. Take the low-profile RAM® Tough-Strap™ on your next adventure on & off the road. Hardware included 1 X-Grip phone holder 1 10-24 x 2" hex bolt 1 long strap 1 short strap 1 long rubber strip 1 short rubber strip 1 tightening knob 1 tether Material High strength composite Cradle/clamp

Dimensions Width range: 1.75"
- 4.5" / 44.5
- 114 mm Max.

Depth:
...





...
Available
kr929.57 SEK
The RAM® Tough-Claw™ is the perfect mounting base for toolless installation & removal on round, square, & odd-shaped rails & bars. The small version of the RAM® Tough-Claw™ can quickly be clamped on rails ranging from. 625" to 1.14" in outer diameter & is ideal for mounting on the yoke of an aircraft, handlebars of bicycles & motorcycles, or even on kayak rails & roll bars. This kit

Includes::
the popular spring-loaded RAM® X-Grip® phone holder, featuring an X design that expands & contracts to provide a perfect fit for your device – even if it s in a case. This large version of the RAM® X-Grip® fits phones ranging from 1.75" to 4.5" in width & keeps your device completely functional & accessible. For outdoor applications, the RAM® X-Grip®

Includes::
a device tether that is recommended for added security & peace of mind. Hardware included 1 optional tether 1 glue tube for rubber caps Material High strength composite Stainless steel Cradle/clamp

Dimensions Width range: 1...





...
Available
kr1101.92 SEK
The RAM® X-Grip® Large Phone Mount with Low-Profile RAM® Tough-Claw™ (RAM-HOL-UN10-400-2U) consists of the small RAM® Tough-Claw™ base & universal large RAM® X-Grip® phone holder, connected by the RAM® Pin-Lock™ adapter. The large RAM® X-Grip® features an ‘X’ design that expands & contracts to secure your phone, &

Includes::
a device tether recommended for outdoor applications. With the RAM® Tough-Claw™ base connected, easily attach the RAM® X-Grip® on round, square, & odd-shaped rails & bars ranging from 0.625” to 1.5” in outer diameter. It is important to verify the

Dimensions of your handheld device with its case, sleeve, or skin when determining the overall size. Hardware included 1 optional tether 1 glue tube for rubber caps Material High strength composite Stainless steel Cradle/clamp

Dimensions Width range: 1.75"
- 4.5" / 44.5
- 114 mm Max.

Depth:
0.875" / 22 mm Clamp range 0.625"
- 1.14" / 16
- 29 mm diameter Weight Capacity Standard use: 2 lbs / 900 gr. Heavy-duty use...











...
Available
kr952.55 SEK
Ideal for handlebars, the RAM-B-149Z-UN10U consists of a zinc-coated U-bolt base, medium length double socket arm, & the popular spring-loaded RAM® X-Grip® large phone holder. In addition, hardware is included to accommodate rails from 0.5"
- 1.25" / 12.5
- 31.5 mm in diameter. The included X-Grip® cradle has a clean & clever four leg design that sports great holding power without hiding your phone behind foam pads & plastic. The spring-loaded X-Grip® cradle expands & contracts, allowing for a perfect custom fit of your cell phone. The perfect complement to the modern sleek interior of today s vehicles, the RAM X-Grip® is the cell phone cradle evolved. The X-Grip®

Includes::
a device tether recommended for outdoor applications. It is important to verify the

Dimensions of your handheld device with a case/sleeve/skin when determining the overall size. Hardware included 1 optional tether 1 glue tube for rubber caps 1 1/4"-20 U-bolt for 0.5"
- 1" rails 1 1/4"-20 U-bolt for 1"
- 1.25"...







...
Available
kr515.92 SEK
The popular spring-loaded RAM® X-Grip® phone holder features an X design that expands & contracts to provide a perfect fit for your device – even if it s in a case. made from high-strength composite & stainless steel, the RAM® X-Grip® phone holder is compatible with a wide variety of RAM® double socket arms & mounting bases. This version of the RAM® X-Grip® fits phones ranging from 1.75" to 4.5" / 45 to 114 mm in width & keeps your device completely functional & accessible. No matter what double socket arm & mounting base you pair the RAM® X-Grip® with, RAM® ball & socket technology allows for near-infinite adjustability to achieve the ideal viewing angle – while also extending the life of your phone by providing shock & vibration damping. For outdoor applications – like being used as a motorcycle phone mount – the RAM® X-Grip®

Includes::
a device tether that is recommended for added security & peace of mind. Features Spring-loaded X design with rubber caps sports great h...

...
Available
kr84.96
Replacement tether for RAM® X-Grip® UN7 phone mounts. The RAM® X-Grip® is one of the best-selling phone mounts on the market, providing a secure hold in nearly any environment. In demanding & open cockpit applications where excessive wind & g-force could cause movement of your phone within the holder, you can ensure added peace of mind with the RAM® X-Grip® tether. It’s also great if you just want a little added stability & vibration control when capturing video while your phone is mounted. The tether is made from high-strength elastomeric material & fits around the standard size RAM® X-Grip® holder for easy attachment to your phone. Features Attaches to the RAM® X-Grip® phone holder & the edges of your device for extra peace of mind in demanding environments Compatible with RAM® X-Grip® UN7 holders made from high-strength elastomeric rubber to ensure a strong hold ...
Available
kr132.71 SEK
Replacement tether for RAM® X-Grip® UN8 tablet mounts. RAM’s X-Grip® is one of the best-selling, most trusted device mounts on the market. The X-Grip® provides simple mounting & a secure hold for phones & tablets of all sizes. Under extreme environments, you can ensure added piece-of-mind with RAM’s X-Grip Tether. The X-Grip Tether is recommended for out-of-cockpit applications where excessive wind & G-force could cause movement of the device within the holder. It’s also great if you just want a little added stability & vibration control when capturing video from the mount. The Tether is made from high-strength elastomeric material & fits around the X-Grip® holder for easy device insertion. Features Attaches to the RAM® X-Grip® phone holder & the edges of your device for extra peace of mind in demanding environments Compatible with RAM® X-Grip® UN8 holders made from high-strength elastomeric rubber to ensure a strong hold ...
Available
kr515.92 SEK
The popular spring-loaded RAM® X-Grip® phone holder features an X design that expands & contracts to provide a perfect fit for your device – even if it s in a case. made from high-strength composite & stainless steel, the RAM® X-Grip® phone holder is compatible with a wide variety of RAM® double socket arms & mounting bases. This version of the RAM® X-Grip® fits phones ranging from 1.87" to 3.25" / 47.5 to 82.5 mm in width & keeps your device completely functional & accessible. No matter what double socket arm & mounting base you pair the RAM® X-Grip® with, RAM® ball & socket technology allows for near-infinite adjustability to achieve the ideal viewing angle – while also extending the life of your phone by providing shock & vibration damping. For outdoor applications – like being used as a motorcycle phone mount – the RAM® X-Grip®

Includes::
a device tether that is recommended for added security & peace of mind. Features Spring-loaded X design with rubber caps sports gre...

...
Available

Ram Mount X-Grip L / Tough-Claw S, Mounting Kit Long

The RAM-B-400-C-UN10U consists of the Tough-Claw™ rail clamp base, long length double socket arm and universal spring-loaded X-Grip® cradle for large phones and phablets. The spring-loaded X-Grip® cradle expands and contracts, allowing for a perfect custom fit of your phone or phablet. Included are easy access grip knobs for quick insertion and release of your handheld device. The Tough-Claw™ rail clamp base is the perfect mounting base for quick and easy tool-less installation and removal on round, square, odd shaped rails and bars. The Tough-Claw™ can be clamped on rails from 0.625" - 1.14" / 16 - 29 mm outer diameter. Perfectly suited for mounting on the yoke of an aircraft, handlebars and seat posts of bicycles, kayak rails, roll bars and much more, the RAM®
Tough-Claw™ will soon become another essential RAM® component in your collection of mounting options. The X-Grip® includes a device tether recommended for outdoor applications. It is important to verify the dimensions of your h...
  • Availability: In Stock
  • Supplier: Motoin SE
  • SKU: se-11074587-001
Availability: In Stock
kr1377.69 SEK

Product Description

The RAM-B-400-C-UN10U consists of the Tough-Claw™ rail clamp base, long length double socket arm & universal spring-loaded X-Grip® cradle for large phones & phablets. The spring-loaded X-Grip® cradle expands & contracts, allowing for a perfect custom fit of your phone or phablet. Included are easy access grip knobs for quick insertion & release of your handheld device. The Tough-Claw™ rail clamp base is the perfect mounting base for quick & easy tool-less installation & removal on round, square, odd shaped rails & bars. The Tough-Claw™ can be clamped on rails from 0.625"
- 1.14" / 16
- 29 mm outer diameter. Perfectly suited for mounting on the yoke of an aircraft, handlebars & seat posts of bicycles, kayak rails, roll bars & much more, the RAM® Tough-Claw™ will soon become another essential RAM® component in your collection of mounting options. The X-Grip®

Includes::
a device tether recommended for outdoor applications. It is important to verify the

Dimensions of your h...

Reviews/Comments

Add New

Intelligent Comparison

Oooops!
We couldn't find anything!
Perhaps this product's unique.... Or perhaps we are still looking for comparisons!
Click to bump this page and we'll hurry up.

Price History

Vouchers

No voucher codes found.
Do you know a voucher code for this product or supplier? Add it to Insights for others to use.

Facebook

Jargon Buster

RAM - Random Access memory
Diameter - A measurement across a circle passing through the middle
phone - Short for telephone. A device that transmits sound allowing point to point communication over long distances
Quick - Something that is fast
Large - something that takes up more space than normal.
Dimensions - The shapes and angles of something or a situation.

Supplier Information

Motoin SE
Page Updated: 2025-02-05 20:08:21

Community Generated Product Tags

Oh No! The productWIKI community hasn't generated any tags for this product yet!
Menu