HIGHSIDER turn signal extension, 27 mm. Extension for turn signals with M8 threaded bolt, black. Tailor-made for your bike
-
...

HIGHSIDER LED fog light, rectangular. LED fog light with black metal housing & clear glass. The universal holder is provided with slotted holes for bottom or top mounting. The 3 Power LEDs provide a very good light output & this with a current consumption of just 0.6 amps (7.5 watts) at 12.5 volts, E-approved. See & be seen
- give your bike personality! The unusual design & perfect technology of the HIGHSIDER headlight series will definitely make you a sensational highlight!

Dimensions

Width: 60 mm

Height: 49 mm

Depth: 56 mm Technical data Power consumption at 12.5 volts: 0.6 A (approx. 7.5 W) Light values: approx. 155 lm (lumen), max. approx. 5310 cd (candela), approx. 5, 700 k (Kelvin) Connections Brown cable = plus (+) Black cable = ground (-) Scope of delivery 1 piece fog light 222-200








...

HIGHSIDER LED taillight / brake light combination MICRO-BULLET. Tail light with power LED in a sleek black aluminum housing & red glass, E-approved. Be seen with complete confidence
- HIGHSIDER s taillight & taillight/turn signal series give you the safety you need & the look you want
- whether cruiser, scooter or speedster.

Dimensions Diameter: max. 30 mm Depth with glass: 75 mm Variants 255-117
- Black, red glass 255-119
- Black, tinted glass Scope of delivery 1 piece rear light Extra stem (15 mm) Note Fender mounting by means of M10 hollow screw Side mount by extra stem (15 mm) Both included





...

HIGHSIDER LED taillight / brake light combination MICRO-BULLET. Tail light with power LED in a sleek black aluminum housing & red glass, E-approved. Be seen with complete confidence
- HIGHSIDER s taillight & taillight/turn signal series give you the safety you need & the look you want
- whether cruiser, scooter or speedster.

Dimensions Diameter: max. 30 mm Depth with glass: 75 mm Variants 255-117
- Black, red glass 255-119
- Black, tinted glass Scope of delivery 1 piece rear light Extra stem (15 mm) Note Fender mounting by means of M10 hollow screw Side mount by extra stem (15 mm) Both included





...

HIGHSIDER LED taillight / brake light combination unit MONO. Tail light with one power LED & clear glass, embedded in a round aluminum housing, E-approved. Be seen with complete confidence
- HIGHSIDER s taillight & taillight/turn signal series give you the safety you need & the look you want
- whether cruiser, scooter or speedster.

Dimensions Diameter: 18 mm

Height: 8 mm Mounting: Threaded bolt M10 x 1.5 mm, length: 13 mm & nylon nut. Current consumption at 12.5 volts: Taillight = 0.02 amps Brake light = 0, 13 Ampere Connections Black wire = ground (-) Yellow cable = taillight (+) Red cable = brake light (+) Variants 255-015
- Black 255-016
- Chrome plated Scope of delivery 1 piece tail light







...

HIGHSIDER MONTANA 2 handlebar end mirror, black anodized. Can be used for left & right side, E-approved. Universal handlebar end mirror, noble design, with a round head made from black anodized aluminum. In the second generation of the popular handlebar end mirror HIGHSIDER MONTANA, the mirror arm has been changed in length & shape. The mirror arm is provided with three stylish air slots & is shorter than the first generation. Through a joint on the clamp, there are additional adjustment options for a better view. The mirror head can now be pointed inward or outward with an Allen wrench. Fits 1 inch (25.4 mm) & 7/8 inch (22 mm) handlebars. Character & overview
- whether retro or modern. The HIGHSIDER mirror series are characterized by characteristic design & aerodynamic function. This is circumspection in perfection.

Dimensions Diameter: 102 mm Stem length: 76 mm Stem length to clamp end: 120 mm Variants 301-032
- Black 301-004
- Matte Black (Blast) Scope of delivery 1 piece...




...

HIGHSIDER MONTANA EVO handlebar end mirror, E-approved. Noble handlebar end mirror with a round head made from black anodized aluminum & a curved stem
- without bend as in the HIGHSIDER MONTANA model. Suitable for handlebars with an inner handlebar diameter of 12 to 22 mm, i.e. for most 7/8-inch & 1-inch aluminum or steel handlebars. Can be used for left & right side. Character & overview
- whether retro or modern. The HIGHSIDER mirror series are characterized by characteristic design & aerodynamic function. This is circumspection in perfection.

Dimensions Diameter: 102 mm

Depth: 22 mm Stem length: approx. 130 mm Variants 301-019
- Black 301-003
- Matte Black (Blast) Scope of delivery 1 piece handlebar end mirror Mounting kit Universal clamping system Note To convert, loosen the five M4 screws & reattach the intermediate adapter on the other side. To close any holes for mounting the original handlebar mirrors use the HIGHSIDER caps.







...

HIGHSIDER MONTANA RIM handlebar end mirror with integrated LED turn signal & position light in the mirror arm, E-approved
- here
...

HIGHSIDER MONTANA RIM handlebar end mirror with integrated LED turn signal in the mirror arm, E-approved
- here functionality
...

HIGHSIDER MONTANA-SLIM handlebar end mirror, E-approved Now take a look at the HIGHSIDER MONTANA-SLIM handlebar end mirror. Incredible how slim the mirror body is. Without ball mount only about 5 mm thin. The mirror body, mirror arm & the clamping are made from aluminum. The silk matt surface underlines the valuable look. The result is a motorcycle rear view mirror that looks sensational & is perfectly as usual perfectly processed. Suitable for 1 inch (25.4 mm) & 7/8 inch (22.2 mm) handlebars. Mountable either with the supplied reducing sleeves directly on the steering tube or on optionally available handlebar ends with handlebar end mirror mount. The mirror can be mounted on the right & left as well as standing up or hanging down. The precise ball joint allows the comfortable & very stable adjustment of the mirror. A joint on the clamp gives the short version additional adjustment options for a better view. The mirror head can be directed inwards or outwards with an Allen key.... ...