Spacer sleeve made from aluminum for almost all turn signals with an M8 threaded bolt from HIGHSIDER. A slot in the sleeve facilitates the passage of the cables. Can be used either as a turn signal extension or as a spacer, if the threaded bolt should bump against the inside of the lamp housing when attaching to the lamp holder. Tailor-made for your bike
- the extensive range of accessories from HIGHSIDER is perfectly tailored to your motorcycle. With the highest level of quality & functionality, you can easily design your bike according to your wishes.

Dimensions Diameter (conical): From 15.5 to 14 mm Length: 10 mm Hole: 8 mm Variants 207-120
- M8
- Black 207-121
- M8
- Chrome plated Scope of delivery 1 pair of spacer sleeves






...

HIGHSIDER plastic cover sleeves for turn signals with M8 thread. After mounting the new turn signals, the M8 thread & the mounting nut can be covered with the help of the plastic cover sleeves for a nicer finish & protection against corrosion. Tailor-made for your bike
- the extensive range of accessories from HIGHSIDER is perfectly tailored to your motorcycle. With a maximum of quality & functionality, you can easily design your bike according to your wishes. Scope of delivery 4 pieces cover sleeves 207-130
...

HIGHSIDER turn signal extension, 27 mm. Extension for turn signals with M8 threaded bolt, black. Tailor-made for your bike
-
...

HIGHSIDER LED fog light, rectangular. LED fog light with black metal housing & clear glass. The universal holder is provided with slotted holes for bottom or top mounting. The 3 Power LEDs provide a very good light output & this with a current consumption of just 0.6 amps (7.5 watts) at 12.5 volts, E-approved. See & be seen
- give your bike personality! The unusual design & perfect technology of the HIGHSIDER headlight series will definitely make you a sensational highlight!

Dimensions

Width: 60 mm

Height: 49 mm

Depth: 56 mm Technical data Power consumption at 12.5 volts: 0.6 A (approx. 7.5 W) Light values: approx. 155 lm (lumen), max. approx. 5310 cd (candela), approx. 5, 700 k (Kelvin) Connections Brown cable = plus (+) Black cable = ground (-) Scope of delivery 1 piece fog light 222-200








...

HIGHSIDER LED taillight / brake light combination MICRO-BULLET. Tail light with power LED in a sleek black aluminum housing & red glass, E-approved. Be seen with complete confidence
- HIGHSIDER s taillight & taillight/turn signal series give you the safety you need & the look you want
- whether cruiser, scooter or speedster.

Dimensions Diameter: max. 30 mm Depth with glass: 75 mm Variants 255-117
- Black, red glass 255-119
- Black, tinted glass Scope of delivery 1 piece rear light Extra stem (15 mm) Note Fender mounting by means of M10 hollow screw Side mount by extra stem (15 mm) Both included





...

HIGHSIDER LED taillight / brake light combination unit MONO. Tail light with one power LED & clear glass, embedded in a round aluminum housing, E-approved. Be seen with complete confidence
- HIGHSIDER s taillight & taillight/turn signal series give you the safety you need & the look you want
- whether cruiser, scooter or speedster.

Dimensions Diameter: 18 mm

Height: 8 mm Mounting: Threaded bolt M10 x 1.5 mm, length: 13 mm & nylon nut. Current consumption at 12.5 volts: Taillight = 0.02 amps Brake light = 0, 13 Ampere Connections Black wire = ground (-) Yellow cable = taillight (+) Red cable = brake light (+) Variants 255-015
- Black 255-016
- Chrome plated Scope of delivery 1 piece tail light







...

HIGHSIDER LED taillight / brake light combination unit MONO. Tail light with one power LED & clear glass, embedded in a round aluminum housing, E-approved. Be seen with complete confidence
- HIGHSIDER s taillight & taillight/turn signal series give you the safety you need & the look you want
- whether cruiser, scooter or speedster.

Dimensions Diameter: 18 mm

Height: 8 mm Mounting: Threaded bolt M10 x 1.5 mm, length: 13 mm & nylon nut. Current consumption at 12.5 volts: Taillight = 0.02 amps Brake light = 0, 13 Ampere Connections Black wire = ground (-) Yellow cable = taillight (+) Red cable = brake light (+) Variants 255-015
- Black 255-016
- Chrome plated Scope of delivery 1 piece tail light







...

HIGHSIDER MONTANA 2 handlebar end mirror, black anodized. Can be used for left & right side, E-approved. Universal handlebar end mirror, noble design, with a round head made from black anodized aluminum. In the second generation of the popular handlebar end mirror HIGHSIDER MONTANA, the mirror arm has been changed in length & shape. The mirror arm is provided with three stylish air slots & is shorter than the first generation. Through a joint on the clamp, there are additional adjustment options for a better view. The mirror head can now be pointed inward or outward with an Allen wrench. Fits 1 inch (25.4 mm) & 7/8 inch (22 mm) handlebars. Character & overview
- whether retro or modern. The HIGHSIDER mirror series are characterized by characteristic design & aerodynamic function. This is circumspection in perfection.

Dimensions Diameter: 102 mm Stem length: 76 mm Stem length to clamp end: 120 mm Variants 301-032
- Black 301-004
- Matte Black (Blast) Scope of delivery 1 piece...




...

HIGHSIDER MONTANA EVO handlebar end mirror, E-approved. Noble handlebar end mirror with a round head made from black anodized aluminum & a curved stem
- without bend as in the HIGHSIDER MONTANA model. Suitable for handlebars with an inner handlebar diameter of 12 to 22 mm, i.e. for most 7/8-inch & 1-inch aluminum or steel handlebars. Can be used for left & right side. Character & overview
- whether retro or modern. The HIGHSIDER mirror series are characterized by characteristic design & aerodynamic function. This is circumspection in perfection.

Dimensions Diameter: 102 mm

Depth: 22 mm Stem length: approx. 130 mm Variants 301-019
- Black 301-003
- Matte Black (Blast) Scope of delivery 1 piece handlebar end mirror Mounting kit Universal clamping system Note To convert, loosen the five M4 screws & reattach the intermediate adapter on the other side. To close any holes for mounting the original handlebar mirrors use the HIGHSIDER caps.







...

HIGHSIDER MONTANA RIM handlebar end mirror with integrated LED turn signal & position light in the mirror arm, E-approved
- here
...