CNC caps for M10 mirror thread, black matt (160-315) or black glossy (160-314) pair. ...

Spacer sleeve made from aluminum for almost all turn signals with an M8 threaded bolt from HIGHSIDER. A slot in the sleeve facilitates the passage of the cables. Can be used either as a turn signal extension or as a spacer, if the threaded bolt should bump against the inside of the lamp housing when attaching to the lamp holder. Tailor-made for your bike
- the extensive range of accessories from HIGHSIDER is perfectly tailored to your motorcycle. With the highest level of quality & functionality, you can easily design your bike according to your wishes.

Dimensions Diameter (conical): From 15.5 to 14 mm Length: 10 mm Hole: 8 mm Variants 207-120
- M8
- Black 207-121
- M8
- Chrome plated Scope of delivery 1 pair of spacer sleeves






...

Spacer sleeve made from aluminum for almost all turn signals with an M8 threaded bolt from HIGHSIDER. A slot in the sleeve facilitates the passage of the cables. Can be used either as a turn signal extension or as a spacer, if the threaded bolt should bump against the inside of the lamp housing when attaching to the lamp holder. Tailor-made for your bike
- the extensive range of accessories from HIGHSIDER is perfectly tailored to your motorcycle. With the highest level of quality & functionality, you can easily design your bike according to your wishes.

Dimensions Diameter (conical): From 15.5 to 14 mm Length: 10 mm Hole: 8 mm Variants 207-120
- M8
- Black 207-121
- M8
- Chrome plated Scope of delivery 1 pair of spacer sleeves






...

HIGHSIDER plastic cover sleeves for turn signals with M8 thread. After mounting the new turn signals, the M8 thread & the mounting nut can be covered with the help of the plastic cover sleeves for a nicer finish & protection against corrosion. Tailor-made for your bike
- the extensive range of accessories from HIGHSIDER is perfectly tailored to your motorcycle. With a maximum of quality & functionality, you can easily design your bike according to your wishes. Scope of delivery 4 pieces cover sleeves 207-130
...

HIGHSIDER turn signal extension, 27 mm. Extension for turn signals with M8 threaded bolt, black. Tailor-made for your bike
-
...

HIGHSIDER LED taillight / brake light combination MICRO-BULLET. Tail light with power LED in a sleek black aluminum housing & red glass, E-approved. Be seen with complete confidence
- HIGHSIDER s taillight & taillight/turn signal series give you the safety you need & the look you want
- whether cruiser, scooter or speedster.

Dimensions Diameter: max. 30 mm Depth with glass: 75 mm Variants 255-117
- Black, red glass 255-119
- Black, tinted glass Scope of delivery 1 piece rear light Extra stem (15 mm) Note Fender mounting by means of M10 hollow screw Side mount by extra stem (15 mm) Both included





...

HIGHSIDER LED taillight / brake light combination MICRO-BULLET. Tail light with power LED in a sleek black aluminum housing & red glass, E-approved. Be seen with complete confidence
- HIGHSIDER s taillight & taillight/turn signal series give you the safety you need & the look you want
- whether cruiser, scooter or speedster.

Dimensions Diameter: max. 30 mm Depth with glass: 75 mm Variants 255-117
- Black, red glass 255-119
- Black, tinted glass Scope of delivery 1 piece rear light Extra stem (15 mm) Note Fender mounting by means of M10 hollow screw Side mount by extra stem (15 mm) Both included





...

HIGHSIDER LED taillight / brake light combination unit MONO. Tail light with one power LED & clear glass, embedded in a round aluminum housing, E-approved. Be seen with complete confidence
- HIGHSIDER s taillight & taillight/turn signal series give you the safety you need & the look you want
- whether cruiser, scooter or speedster.

Dimensions Diameter: 18 mm

Height: 8 mm Mounting: Threaded bolt M10 x 1.5 mm, length: 13 mm & nylon nut. Current consumption at 12.5 volts: Taillight = 0.02 amps Brake light = 0, 13 Ampere Connections Black wire = ground (-) Yellow cable = taillight (+) Red cable = brake light (+) Variants 255-015
- Black 255-016
- Chrome plated Scope of delivery 1 piece tail light







...

HIGHSIDER LED taillight / brake light combination unit MONO. Tail light with one power LED & clear glass, embedded in a round aluminum housing, E-approved. Be seen with complete confidence
- HIGHSIDER s taillight & taillight/turn signal series give you the safety you need & the look you want
- whether cruiser, scooter or speedster.

Dimensions Diameter: 18 mm

Height: 8 mm Mounting: Threaded bolt M10 x 1.5 mm, length: 13 mm & nylon nut. Current consumption at 12.5 volts: Taillight = 0.02 amps Brake light = 0, 13 Ampere Connections Black wire = ground (-) Yellow cable = taillight (+) Red cable = brake light (+) Variants 255-015
- Black 255-016
- Chrome plated Scope of delivery 1 piece tail light







...

HIGHSIDER MONTANA 2 handlebar end mirror, black anodized. Can be used for left & right side, E-approved. Universal handlebar end mirror, noble design, with a round head made from black anodized aluminum. In the second generation of the popular handlebar end mirror HIGHSIDER MONTANA, the mirror arm has been changed in length & shape. The mirror arm is provided with three stylish air slots & is shorter than the first generation. Through a joint on the clamp, there are additional adjustment options for a better view. The mirror head can now be pointed inward or outward with an Allen wrench. Fits 1 inch (25.4 mm) & 7/8 inch (22 mm) handlebars. Character & overview
- whether retro or modern. The HIGHSIDER mirror series are characterized by characteristic design & aerodynamic function. This is circumspection in perfection.

Dimensions Diameter: 102 mm Stem length: 76 mm Stem length to clamp end: 120 mm Variants 301-032
- Black 301-004
- Matte Black (Blast) Scope of delivery 1 piece...




...