Opti MATE cable O-57. Converts the MV Agusta specific battery charging port under the seat (on newer models) into an industry standard 2-pin SAE connector. Features Length: 30 cm MV Agusta >2010 connector Industry standard 2-pin SAE connector 15 A fuse Max. Cable load: 5 A Use at very low temperatures: down to -40 °C Cable remains flexible at sub-freezing temperatures With sealing cap for Opti Mate heavy-duty SAE connector High quality cable, developed by Tec Mate ...

Opti MATE cable O-37. Monitor your vehicle s battery status with O-122/123/125 via the OBDII port or maintain your battery (low current). Features Length: 100 cm Industry standard 2-pin SAE connector Max. Cable load: 10 A 15 A fuse Use at very low temperatures: down to -40 °C Cable remains flexible at sub-freezing temperatures Closure cap for Opti MATE SAE high performance connector included High quality cable, developed by Tec Mate ...

Opti MATE Cable O-20 / O-20L. Create a weatherproof SAE power socket for installation in the dash or fairing. The connector body fits into a 25 mm / 1" dia. hole, & the rubber expander bushing secures the connector in the hole. Features O-20 Length: 30 cm Industry standard 2-pin SAE connector Max. Cable load: 10 A Use at very low temperatures: down to -40 °C The cable remains flexible at temperatures below freezing point High quality cable, developed by Tec Mate Features O-20L Length: 120 cm Industry standard 2-pin SAE connector Max. Cable load: 10 A Use at very low temperatures: down to -40 °C The cable remains flexible at temperatures below freezing point High quality cable, developed by Tec Mate ...

Opti Mate Cable O-40. M18 SAE flush mount socket to be installed in the instrument panel, with cable terminating in a SAE plug. The 18 A / 0.82 mm² cable is rated down to -40 °C, so it is ideal for permanent installation on a vehicle that will be used in cold weather. The socket can be used as a replacement for the more expensive DIN socket & plug system (" Hella"), which is common on BMW, Triumph, Victory & now on some Ducati motorcycles. Connection to the battery requires a battery cable that terminates in an SAE connector, such as the weatherproof Opti Mate O-01 battery cable. Features O-40S cable length 15 cm
- perfectly adapted for Harley Davidson
- short cable length for easy connection to existing HD SAE cable O-40 cable length 100 cm Front panel mount with rear fastener Connector body fits a Ø18mm (23/32”) drilled hole. Industry standard durability – Built to last! Perfect for use in the harshest environments, Low temperature use -40°C/-40°F – Remains Flexible!

...

Opti MATE cable O-125. SAE to SAE adapter with state of charge monitor that connects directly to the SAE battery lead fitted to the 12 V battery in your parked powersport vehicle – 24-7 battery status at a blink of an LED! SAE connection system fits any SAE standard 2-pin connector,

Includes:: in-line seal that mates with Opti Mate SAE – Premium quality! Sealed monitor with 4 LEDs indicate battery state of charge from full to empty for 12V lead-acid (AGM, GEL or STD) batteries – LED corresponding to charge level blinks every 3 seconds. SAE quick connect charge port for charging battery when needed – with weatherproof sealing cap when vehicle is moving! Displays charge system status when engine is running – easy pre-ride check at a glance to see if battery is receiving charge. Features Length: 6″/15 cm 2-pin SAE connectors, protected from dirt & liquid with rubber sealing cap & shroud 2 automatic Modes – Battery charge level monitor (single LED blink mode) & Charging system test (arrow mo...

...

Opti MATE Solar, the world s most efficient solar pulse charging system that protects your battery & provides safe long-term maintenance. Saves deeply discharged batteries while still at 4 volt with the unique pulse function. Fastest charge
- occurs as the intelligent charge function selects pulse or continuous charge depending on the intensity of sunlight. Intelligent maintenance
- continues the next day if a battery has held charge overnight, otherwise the program switches back to the OPTIMIZE step. Battery status is displayed every 3 seconds. Ready indicator for STD & high capacity AGM batteries. Draws less than 0.5 m A in monitoring mode. Automatically switches to CHARGE when solar intensity is sufficient. Opti MATE charge controller is separate from the panel & can be placed close to the vehicle or battery for easy tracking of charging & maintenance progress. The solar panel must be mounted & oriented to receive direct sunlight. The range/distance between the battery & the panel is 315 cm. For extension, use Opti MATE extension cables O-03, O-13 or O-23 & connect it to the solar panel & Opti MATE charge controller. Weatherproof charge controller housing with mounting holes & loops (for Velcro or zip tie). SAE input connector for solar panel & output cable of 100 cm connected to the battery with the supplied weatherproof battery cable & standard battery terminal kit. No risk of overcharging. Completely safe for vehicle electronics. Spark suppression. Safe for long term battery maintenance. Automatic shutdown in case of short circuit or disconnected battery. Solar panel POWER: 10 watts (max) Voltage: 12V / 12.8V Outdoor use Weatherproof polycrystalline aluminum frame with 4 mounting brackets. Outside dimension, including corner brackets: Width = 24.9 cm / 9.8" Height = 37.6 cm / 14.8" Depth = 2.6 cm / 1" Output cable 200 cm / 80" with SAE connector Opti Mate charging/monitoring controller Charging current: 0.83A from 10W panel (max. average current), 3-5A pulse current Indoor/outdoor use (lowest temperature: -4°F / -20°C) Rescue mode: start with low 4V voltage Suitable for: STD, AGM & GEL 12V batteries from 2
- 240 Ah & Lithium LFP 12-8V-/13.2V batteries. Input: 15
- 22V Design: weatherproof charge controller case. Scope of delivery Weatherproof battery cable Standard battery terminal set 10W solar panel Safety No risk of overcharging Completely safe for vehicle electronics Spark suppression Safe for long-term battery maintenance Automatic shutdown in case of short circuit or disconnected battery



...

Opti Mate TS-120. 12 V tester for battery state of charge, cranking performance & vehicle charging system. The ultimate pocket tester for on-vehicle battery performance & alternator voltage testing with either 12 V lead-acid or 12.8 V Li Fe PO4 starter battery – easy troubleshooting from cranking to charging! Features For vehicles fitted with 12V AGM, GEL & STD lead-acid or 12.8V LFP / Li Fe PO4 starter battery As easy as 1-2-3, connect to battery, check state of charge, start engine tester displays cranking voltage & vehicle charge voltage simultaneously – 15 sec is all you need! Display cranking volts down to 6V & charge voltage range up to 15 V – Check weak battery or overcharging Easy to use! Connect with the included clips to the battery or connect to an installed SAE battery lead Length: 40″/100 cm Charge connector (input): 2-pin SAE (+set battery clips) Operation: fully automatic State of charge result in GREEN / RED LED resuls, indication of lowest start Volts when engine st... ...

Opti Mate TS-126. State of charge tester – all 12 V lead-acid & 12.8 V/13.2 V Lithium batteries. The ideal parts counter battery voltage tester for all 12 V lead-acid & 12.8 V / 13.2 V Lithium starter batteries – easily check any battery voltage instantly! Features Indicates static voltage & state of charge percentage for 12 V AGM, GEL & STD lead-acid & 12.8 V / 13.2 V Lithium LFP/ Li Fe PO4 batteries Easy to understand comparitive display compares voltage & state of charge for all vehicle starter battery technologies – helps educate customers Easy to use! Connect with the included clips to the battery or connect to an installed SAE battery lead Industry standard durability – Built to last The smart choice for a battery sales counter – check new batteries before sale or test returned batteries Length: 40″/100 cm Charge connector (input): 2-pin SAE (+set battery clips) Operation: fully automatic State of charge result in VOLTS & %, 3 different bands for STD, AGM/GEL & Li Fe PO4 4 series batteries Cable rating: SPT-2W 16 AWG (1.32 mm 2) Fuse: No fuse Use: -40 °C/-40 °F very low temperature, remains flexible at ‘below freezing’ temperatures Style: Fully enclosed electronic circuitry with multiple LEDs, SAE charge connector Easy to use! Connect clips to the battery & read the result. The Opti Mate battery tester’s microprocessor draws very low power from the battery itself to determine & display battery status. Tests all 12 V Lead-acid & 12.8 V / 13.2 V Li Fe PO4 (LFP) Lithium batteries & displays result that can be used to convey information to customer. ...

The teddy lining on the inside will always keep you warm. Waist & hem ar adjustable, to create the desired fit. Features Det. hood, det. synthetic fur on hood, teddy inside, adjustable waist, hem adjustment articulated sleeves. Material MPC WP 5 000 MP 5 000 MPC MPC is characterized by extremely long-lasting waterproof properties & above average breathing performance, making it ideal for the active outdoor life, regardless of the water & moisture Mother Nature decides to throw in your direction. Tenson MPC is also available with stretch characteristics, perfect for those activities that test us a little more. ...

The teddy lining on the inside will always keep you warm. Waist & hem ar adjustable, to create the desired fit. Features Det. hood, det. synthetic fur on hood, teddy inside, adjustable waist, hem adjustment articulated sleeves. Material MPC WP 5 000 MP 5 000 MPC MPC is characterized by extremely long-lasting waterproof properties & above average breathing performance, making it ideal for the active outdoor life, regardless of the water & moisture Mother Nature decides to throw in your direction. Tenson MPC is also available with stretch characteristics, perfect for those activities that test us a little more. ...