The Opti Mate side stand base provides stability by distributing the weight & providing support on soft ground, grass (when camping) or hot asphalt. The oval shape is perfect for motorcycles with a short side stand base & for large machines with a longer side stand base. BONUS: With built-in splash guard rim to use as a coaster for coffee mugs or as a beer mat! Features

Size: 14 x 12 cm

Material: heat-resistant ABS 5 mm hole for tether, rope



...

Opti Mate Lithium 0.8A, the essential battery charger for the 12.8V/13.2V Li Fe P04 / LFP in your off-road, moto-cross or race motorcycle. Ultimate protection for your high performance Lithium battery. Features Helps to maintain your lithium iron phosphate battery & ensure a long battery life Checks battery for short circuits, dead cells & voltage retention Battery maintainer’s specific program efficiently recharges & balances energy cell levels Ideal for Lithium (Li Fe PO4) 12.8/13.2V batteries from 1 – 10 Ah Charging amps: 0.8A (constant current) Charging Volts: nominal: 12.8V range: 0.5V – 14.4V Operation: Fully automatic Comes with EU-Plug ...

Opti MATE Lithium 4 x 0.8 A. Unique preparation of Li Fe PO4 batteries for dealers. Features The 4-channel Opti MATE Lithium 0.8 A 4S simultaneously charges up to 4 x Li Fe PO4/LFP (lithium iron phosphate) batteries with 4 cells in series with a nominal voltage of 12.8 V
- 13.2 V Use: indoor/outdoor (lowest temperature: -20 °C) Rescue: low voltage start of 0.5 V + 3-stage low voltage rescue & test Ideal for: Li Fe PO4 (LFP) 12.8/13.2 V batteries with 4 cells in series from 2
- 30 Ah Input: Global (100-240 V, 50-60 Hz), high efficiency (CEC listed), fully encapsulated Supplied with EU plug Weatherproof housing with wall bracket With 180 cm power cable & 4 x 180 cm charging cable with SAE plug 4 x weatherproof battery lead & 4 x standard battery terminal set included No risk of overcharging Completely safe for vehicle electronics Spark suppression Safe for long term battery maintenance Automatic shutdown in case of short circuit or disconnected battery Each bank charges independently & inc...

...

Opti MATE Lithium 4S 0.8A. Unique Li Fe PO4 battery protection! The Opti MATE Lithium 4S 0.8A charges Li Fe PO4/LFP (Lithium Iron Phosphate) batteries with 4 cells in series with a nominal voltage of 12.8 V
- 13.2 V. Features Saves Li Fe PO4 batteries with low voltage Special Li Fe PO4 charging cycle Maintains & protects Li Fe PO4 batteries Battery BMS reset Charging current: 0.8 A Use: indoor/outdoor (lowest temperature: -20 °C) Rescue: low voltage start of 0.5 V + 3-stage low voltage rescue & test Ideal for: Li Fe PO4 (LFP) 12.8/13.2 V batteries with 4 cells in series from 2
- 30 Ah Input: Global (100-240 V, 50-60 Hz), high efficiency (CEC listed), fully enclosed Supplied with EU plug Weatherproof housing with wall bracket 180 cm power cord & 180 cm charging cable with SAE connector Weatherproof battery lead & & standard battery terminal set No risk of overcharging Completely safe for vehicle electronics Spark suppression Safe for long term battery maintenance Automatic shutdown in case of...

...

Optimate Lithium 4S 10A. The fastest professional charger for the 12.8V/13.2V Li Fe P04/LFP batteries in powerbikes/race bikes, cars or boats, with TUNE mode for diagnostics or programming updates. The ultimate lithium charger for race car owners! Features Ideal for: Lithium (Li Fe PO4) 12.8 V / 13.2 V batteries from 3
- 120 Ah Charging current: 10 A (Ampmatic) Charging voltages: nominal: 12.8 V
- 13.2 V range: 0.5 V
- 14.4 V Operation: Fully automatic (in 1 step) TUNE mode provides stable power for vehicle system reprogramming, showroom vehicle demo, or retaining stored settings when battery cables are disconnected to install powered accessories or replace battery Usage: Indoor/outdoor (lowest temperature: -40 °C). Input: Global (100-240 V 50-60 Hz), high efficiency (CEC listed), fully encapsulated Supplied with EU plug Design: Weatherproof enclosure with wall mount, with 180 cm power cord & 180 cm charging cord with SAE connector Rescue: low voltage start of 0.5V + 3-stage low voltage...


...

The fastest professional battery charger for Li Fe P04/LFP batteries. Features Charging voltage 12.8 V Charging amps: 9A (Ampmatic) Adjusts current to match battery size & condition Can be used in temperatures as low as -20 °C (-4 °F) Advanced Lithium save mode will save a battery from as low as 0, 5V Push button activated BMS wake-up mode safely wakes battery out of sleep mode or low discharge Smart interactive maintenance prevents discharge from connected circuitry Global input (100V-240V 50 Hz-60 Hz), high-efficiency, fully sealed Ideal for Lithium (Li Fe PO4) 12.8/13.2V batteries from 2 – 120 Ah Charging Amps: 10A (Ampmatic current) Charging Volts: nominal: 12.8V range: 0.5V – 14.4V Operation: Fully automatic Comes with EU-plug ...

The fastest professional battery charger for Li Fe P04/LFP batteries. Features Allows for selection between 4S (12, 8V) & 5S (16V) charging Charging amps: 9A (Ampmatic) Adjusts current to match battery size & condition Can be used in temperatures as low as -20 °C (-4 °F) Advanced Lithium save mode will save a battery from as low as 0, 5V Push button activated BMS wake-up mode safely wakes battery out of sleep mode or low discharge Smart interactive maintenance prevents discharge from connected circuitry Global input (100V-240V 50 Hz-60 Hz), high-efficiency, fully sealed Comes with EU-plug ...

Opti MATE Lithium LFP Select. 10-stage encapsulated battery-saving 12.8 V 9.5 A / 16 V 7.5 A charger & maintenance unit. Optimate Lithium Select, the fastest professional charger for 12.8 V/16 V Li Fe P04 / LFP in powerbikes/race bikes, cars or boats. The ultimate lithium charger for race car owners! Features Select 12.8 V or 16 V to achieve the specified charge voltage for your 12 V battery, then connect to the battery, the charger does the rest Ampmatic charge control for lithium adjusts current based on battery size & condition
- a small battery gets less, a large battery gets more The most advanced lithium saving mode saves the battery while still at 0.5 V
- continues charging while the battery is healthy, stops & warns of faults! Button-activated BMS wake-up mode safely wakes the battery from sleep mode or deep discharge Opti Mate Lithium 24-7 intelligent interactive maintenance prevents discharge from connected loads & guarantees more battery performance & longer life! Automa...

...

Opti Mate Lithium 4s 5A, the ‘PRO’ battery charger for the 12.8V/13.2V Li Fe P04 / LFP in performance / race motorcycles, cars or craft. The racer / dealers’ choice! Features Opti Mate Lithium, the first Opti Mate to protect your Li Fe PO4 battery in a way no other charger has Will protect your investment & keep your Lithium Iron Phosphate (Li Fe PO4 / LFP) battery performing as advertised, for a very long time With 5 amps of charge current available, Opti Mate Lithium’s unique multi-step Ampmatic program recharges & balances cells within the battery quickly & efficiently Opti Mate Lithium’s maintenance program delivers current to the vehicle circuitry, protecting & keeping the battery at 100% charge Tests & displays battery condition before charging Voltage retention test is conducted for 30 minutes during which no charge current is delivered, & provides results indicating the battery’s general state of health The 12-hour MAINTENANCE CHARGE CYCLE consists of 30-minute float charge periods at a voltage of 13, 6V followed by & alternating with 30 minute “rest” (no charge current) periods During the float charge period, current is delivered only if the battery has lost charge due to connected vehicle circuitry, a refresh cycle may be performed if the charge level has dropped significantly Charge progress is tracked against the ideal Li Fe PO4 charge curve, internal damage will be detected & unnecessary charging of a battery that cannot be recovered is prevented

Includes:: permanent ringlet connector with weatherproof cap & a set of battery clips Ideal for Lithium (Li Fe PO4) 12.8/13.2V batteries from 3 – 100 Ah Charging Amps: 5A (Ampmatic current) Charging Volts: nominal: 12.8V range: 0.5V – 14.4V Operation: Fully automatic CE conformity Comes with EU-plug

...

Create an ‘easy access’ permanent connection to the battery of your vehicle. Features With adjustable M6 / 1/4″ – M8 / 5/16” ringlets that fit all powersport & most automotive battery terminals – premium quality! Custom designed, SAE connector with snug weatherproof seal & cap – Keeps out dirt & water! Zip tie slits allow easy & secure fastening to vehicle – SAE connector can be positioned out of harms way. Perfect for use in the harshest environments, Low temperature use -40° C / -40° F – Remains Flexible! Inline 15 Amp fuse protects against short circuit or over-current. LENGTH: 20″/50 cm CONNECTORS: 1/4″ (M6) / 5/16” (M8) Ringlets to SAE CABLE RATING: 18 AWG / 0.82 mm 2 SPT-2W STYLE: Rubber sealing cap & shroud for Opti Mate heavy duty SAE connector ...