Opti MATE Cable TM-73. A 2.5 meter extension cable that allows a pre-2015 Accu Mate or pre-2012 Opti Mate with TM connectors to be used further away from the vehicle or battery. Simply plug one end into the Accu Mate or Opti Mate outlet & the other end into the vehicle. Rugged cable & "glide-guide" TM connectors provide a reliable connection. Can also be used with " Power Accessories" such as USB (Universal Serial Bus) chargers, flashlights, etc. to extend their range from the battery connection cable. Features Length: 250 cm 2-pole KET plug to 2-pole KET socket Max. Cable load: 5 A Use at very low temperatures: down to -40 ° C Cable remains flexible at sub-freezing temperatures High quality cable, designed by Tec Mate ...

Opti MATE cable TM-71. Accessory plug cable for Opti Mate chargers with white TM connectors (pre-2012). Convert your older Tec Mate charger or UK type charger to connect to the Opti MATE permanent battery lead (or other SAE connector). Features Length: 40 cm Connector: SAE to KET/TM socket Cable rating: 16 AWG (1.31 mm²) SPT-2W Use at very low temperatures: down to -40 °C (-40 °F) Cable remains flexible at sub-freezing temperatures

Includes:: rubber cap & gasket for Opti MATE SAE connector Not compatible with Opti MATE chargers or accessories that have a black SAE compatible connector

...

Opti MATE cable TM-72. Accessory plug cable for Opti Mate chargers with white TM plugs (pre 2012). Allows connection to standard cigarette lighter sockets as well as small 12v accessory sockets fitted to some BMW, Ducati, Honda & Triumph motorcycles by removing the removable red sleeve. It also fits into the matching TM-78 accessory socket. Features Innovative high performance system Compatible with standard TM plugs Reliable weatherproof connection Thick copper 18 SWG cable Length: 50 cm Not compatible with Opti MATE chargers or accessories which have a black SAE compatible connector Note Please verify that your cigarette lighter or power outlet is live with the ignition off before ordering. The accessory plug cord is wired for negative grounded vehicles. If you have a positive grounded vehicle, the plug will need to be rewired accordingly. This is a simple task as screw terminals are used. ...

Opti MATE cable O-17. Convert your older Tec Mate charger or British chargers to connect to the Opti MATE permanent battery cable (or other SAE battery cable). The 2-pin KET / TM / british connector is converted to an industry standard SAE 2-pin connector. Features Length: 15 cm Max. cable load: 5 A Use at very low temperatures: down to -40 ° C High quality cable, developed by Tec Mate ...

The Opti Mate side stand base provides stability by distributing the weight & providing support on soft ground, grass (when camping) or hot asphalt. The oval shape is perfect for motorcycles with a short side stand base & for large machines with a longer side stand base. BONUS: With built-in splash guard rim to use as a coaster for coffee mugs or as a beer mat! Features

Size: 14 x 12 cm

Material: heat-resistant ABS 5 mm hole for tether, rope



...

Opti MATE Lithium 4 x 0.8 A. Unique preparation of Li Fe PO4 batteries for dealers. Features The 4-channel Opti MATE Lithium 0.8 A 4S simultaneously charges up to 4 x Li Fe PO4/LFP (lithium iron phosphate) batteries with 4 cells in series with a nominal voltage of 12.8 V
- 13.2 V Use: indoor/outdoor (lowest temperature: -20 °C) Rescue: low voltage start of 0.5 V + 3-stage low voltage rescue & test Ideal for: Li Fe PO4 (LFP) 12.8/13.2 V batteries with 4 cells in series from 2
- 30 Ah Input: Global (100-240 V, 50-60 Hz), high efficiency (CEC listed), fully encapsulated Supplied with EU plug Weatherproof housing with wall bracket With 180 cm power cable & 4 x 180 cm charging cable with SAE plug 4 x weatherproof battery lead & 4 x standard battery terminal set included No risk of overcharging Completely safe for vehicle electronics Spark suppression Safe for long term battery maintenance Automatic shutdown in case of short circuit or disconnected battery Each bank charges independently & inc...

...

Opti MATE Lithium 4S 0.8A. Unique Li Fe PO4 battery protection! The Opti MATE Lithium 4S 0.8A charges Li Fe PO4/LFP (Lithium Iron Phosphate) batteries with 4 cells in series with a nominal voltage of 12.8 V
- 13.2 V. Features Saves Li Fe PO4 batteries with low voltage Special Li Fe PO4 charging cycle Maintains & protects Li Fe PO4 batteries Battery BMS reset Charging current: 0.8 A Use: indoor/outdoor (lowest temperature: -20 °C) Rescue: low voltage start of 0.5 V + 3-stage low voltage rescue & test Ideal for: Li Fe PO4 (LFP) 12.8/13.2 V batteries with 4 cells in series from 2
- 30 Ah Input: Global (100-240 V, 50-60 Hz), high efficiency (CEC listed), fully enclosed Supplied with EU plug Weatherproof housing with wall bracket 180 cm power cord & 180 cm charging cable with SAE connector Weatherproof battery lead & & standard battery terminal set No risk of overcharging Completely safe for vehicle electronics Spark suppression Safe for long term battery maintenance Automatic shutdown in case of...

...

Optimate Lithium 4S 10A. The fastest professional charger for the 12.8V/13.2V Li Fe P04/LFP batteries in powerbikes/race bikes, cars or boats, with TUNE mode for diagnostics or programming updates. The ultimate lithium charger for race car owners! Features Ideal for: Lithium (Li Fe PO4) 12.8 V / 13.2 V batteries from 3
- 120 Ah Charging current: 10 A (Ampmatic) Charging voltages: nominal: 12.8 V
- 13.2 V range: 0.5 V
- 14.4 V Operation: Fully automatic (in 1 step) TUNE mode provides stable power for vehicle system reprogramming, showroom vehicle demo, or retaining stored settings when battery cables are disconnected to install powered accessories or replace battery Usage: Indoor/outdoor (lowest temperature: -40 °C). Input: Global (100-240 V 50-60 Hz), high efficiency (CEC listed), fully encapsulated Supplied with EU plug Design: Weatherproof enclosure with wall mount, with 180 cm power cord & 180 cm charging cord with SAE connector Rescue: low voltage start of 0.5V + 3-stage low voltage...


...

Optimate Lithium 4s 6A
- the LITHIUM series PRO battery charger for the 12.8V/13.2V Li Fe P04/LFP battery in performance/race bikes,
...

The fastest professional battery charger for Li Fe P04/LFP batteries. Features Charging voltage 12.8 V Charging amps: 9A (Ampmatic) Adjusts current to match battery size & condition Can be used in temperatures as low as -20 °C (-4 °F) Advanced Lithium save mode will save a battery from as low as 0, 5V Push button activated BMS wake-up mode safely wakes battery out of sleep mode or low discharge Smart interactive maintenance prevents discharge from connected circuitry Global input (100V-240V 50 Hz-60 Hz), high-efficiency, fully sealed Ideal for Lithium (Li Fe PO4) 12.8/13.2V batteries from 2 – 120 Ah Charging Amps: 10A (Ampmatic current) Charging Volts: nominal: 12.8V range: 0.5V – 14.4V Operation: Fully automatic Comes with EU-plug ...