Please Note We are not allowed to ship this item outside the EU. Be one with nature As the successor of the very popular " Neotec" model presented at the end of 2011, the Neotec II now offers numerous new features & functions that are once again considered the new standard in the flip-up helmet segment. Especially the first complete integration of a communication solution for a SHOEI helmet is the special feature of this model. New flip-up helmet with pioneering design First of all, the striking design of the Neotec II is certainly striking. Its even more aggressive look in extremely compact design thanks to three different shell sizes, combined with perfect fit & maximum functionality, characterize this model. New lines, a flat finish of the visor & chin part, as well as the partial use of black components create a progressive & consistent overall picture. In order to fit as many motorcycle models as possible, the upper ventilation also serves as a spoiler for upright driving, while in a sportier & forward inclined driving position, the rear spoiler shape of the shell particularly achieves its stabilizing effect. Enjoy the comfort zone To make extra-long journeys even more enjoyable, we have once again optimized wearing comfort & reduced unwanted interference factors with the new Neotec II. Thanks to the " Noise Isolation" construction, the cheek pads, which have been developed in the wind tunnel, prevent the penetration of wind & thus enable a significantly quieter driving experience. If the stainless steel ratchet closure is closed, the Neotec II offers a very effective wind protection even down. The chin spoiler (Aero Deflector) for relaxed driving with low turbulence is also redesigned & stability-enhancing. The 3D-designed, completely removable & washable pad consists of several urethane foams in different degrees of hardness & thus offers a perfect fit & an extremely high wearing comfort. Revised flip-up mechanism As with its predecessor, the folding mechanism of the Neotec II is eccentrically shaped & provided with a variable axis to ensure optimal closure. The chin part is held up securely in its position by means of a now stronger mechanism, even when folded up. In addition, there is another rear snap-in position, which allows the P/J double homologation as a jet & full face helmet. The trigger button of the folding mechanism of the Neotec II was designed so that it can be operated well in the winter with thicker gloves. Incidentally, the rear edge of the chin part has a vortex generator, which noticeably calms the air flow at this transition. Sophisticated protection The Neotec II features an Advanced Integrated Matrix (AIM) shell made from five different fiberglass & organic layers. So an optimal compromise of maximum stability & simultaneous flexibility is achieved. Depending on the area, the core of the Neotec II also consists of several EPS elements of different hardness, optimally absorbing impact energy. For the first time an integrated communication Completely new to SHOEI is the ability to fully integrate an optional communication system into the helmet shell. In the case of the Neotec II, a separate, triangular-shaped control unit was provided on the lower helmet side, which was completely embedded in the helmet shell, thus enabling a homogeneous appearance. The leading manufacturer "SENA" is a partner of SHOEI & offers with its specially developed for the Neotec II SRL * -System (SHOEI Rider Link) the right intercom possibility in groundbreaking 3-button design. The SRL * chipset is based on SENA s 20S system & is currently the best communication solution on the market. Up to eight drivers can connect to each other with a maximum of 2 km range via Bluetooth 4.1, communicate with each other, listen to music, use the mobile phone or navigation system u.v.m. Enough air for long tours A newly developed ventilation system makes it a perfect choice for the touring rider. The lower air intake is reshaped, provides mouth & visor area with fresh air & is particularly airtight when closed. The upper ventilation has been designed with two air intakes compared to its predecessor, while above the slots in the rear area there are already air outlets. The rear ventilation with its three other air outlets also serves as a spoiler & "pulls" by this negative pressure formally the spent air from the helmet. Visor without hard edge The new CNS-3 visor stands out with its beveled edge in the upper area, which particularly prevents moisture from penetrating into the helmet interior. In addition, the visor seal has been redesigned & ensures a tight & tight seal between visor & outer shell. Different material thicknesses & a distortion-free, extra-large view characterize the injection molded CNS-3 visor made from polycarbonate. The integrated QSV-1 sun visor of the Neotec II can now also be optionally replaced with a yellow tinted, contrast-enhancing lens. Also, the cutout opening of the helmet shell was significantly reduced for the sun visor mechanism, whereby a significant increase in stability in this area was achieved. Function Prepared for a Sena communication system, perfectly integrated into the helmet No protruding control unit Helmet design is not affected by the system Safety Double closure for driving with open chin part Shell made from AIM EPS core system with two degrees of hardness Anti-fogging CNS 3 Pinlock system Stainless steel micro ratchet closure 360 ° folding mechanism lock made from stainless steel Double homologation P/J ECE 22.05 homologated Comfort QSV-1 sun visor 3 differently sized helmet shells 3 D Head pad, removable & washable Removable & washable chin strap pad Newly designed cheek padding

Includes:: Noise Isolator Deflector prevents ingress of wind Maximum noise reduction Optimal wearing comfort Ventilation Multiple ventilation Inlets on the top of the head & chin 2 outlets at the back Extremely enhanced airflow Aerodynamics Greatly enhanced performance Integrated spoiler Integrated vortex generator Novelist Chin Spoiler (Aero Deflector) Test ratings " Best Buy"
- Ride Magazine 07/2022 Note Please be aware, as long as nothing else is written in the item description: All helmets will be delivered only with the ECE certification by default, even if it is shown differently. all helmets that have a visor will be delivered with a clear visor, even if it is shown differently.


...

Please Note We are not allowed to ship this item outside the EU. Be one with nature As the successor of the very popular " Neotec" model presented at the end of 2011, the Neotec II now offers numerous new features & functions that are once again considered the new standard in the flip-up helmet segment. Especially the first complete integration of a communication solution for a SHOEI helmet is the special feature of this model. New flip-up helmet with pioneering design First of all, the striking design of the Neotec II is certainly striking. Its even more aggressive look in extremely compact design thanks to three different shell sizes, combined with perfect fit & maximum functionality, characterize this model. New lines, a flat finish of the visor & chin part, as well as the partial use of black components create a progressive & consistent overall picture. In order to fit as many motorcycle models as possible, the upper ventilation also serves as a spoiler for upright driving, while in a sportier & forward inclined driving position, the rear spoiler shape of the shell particularly achieves its stabilizing effect. Enjoy the comfort zone To make extra-long journeys even more enjoyable, we have once again optimized wearing comfort & reduced unwanted interference factors with the new Neotec II. Thanks to the " Noise Isolation" construction, the cheek pads, which have been developed in the wind tunnel, prevent the penetration of wind & thus enable a significantly quieter driving experience. If the stainless steel ratchet closure is closed, the Neotec II offers a very effective wind protection even down. The chin spoiler (Aero Deflector) for relaxed driving with low turbulence is also redesigned & stability-enhancing. The 3D-designed, completely removable & washable pad consists of several urethane foams in different degrees of hardness & thus offers a perfect fit & an extremely high wearing comfort. Revised flip-up mechanism As with its predecessor, the folding mechanism of the Neotec II is eccentrically shaped & provided with a variable axis to ensure optimal closure. The chin part is held up securely in its position by means of a now stronger mechanism, even when folded up. In addition, there is another rear snap-in position, which allows the P/J double homologation as a jet & full face helmet. The trigger button of the folding mechanism of the Neotec II was designed so that it can be operated well in the winter with thicker gloves. Incidentally, the rear edge of the chin part has a vortex generator, which noticeably calms the air flow at this transition. Sophisticated protection The Neotec II features an Advanced Integrated Matrix (AIM) shell made from five different fiberglass & organic layers. So an optimal compromise of maximum stability & simultaneous flexibility is achieved. Depending on the area, the core of the Neotec II also consists of several EPS elements of different hardness, optimally absorbing impact energy. For the first time an integrated communication Completely new to SHOEI is the ability to fully integrate an optional communication system into the helmet shell. In the case of the Neotec II, a separate, triangular-shaped control unit was provided on the lower helmet side, which was completely embedded in the helmet shell, thus enabling a homogeneous appearance. The leading manufacturer "SENA" is a partner of SHOEI & offers with its specially developed for the Neotec II SRL * -System (SHOEI Rider Link) the right intercom possibility in groundbreaking 3-button design. The SRL * chipset is based on SENA s 20S system & is currently the best communication solution on the market. Up to eight drivers can connect to each other with a maximum of 2 km range via Bluetooth 4.1, communicate with each other, listen to music, use the mobile phone or navigation system u.v.m. Enough air for long tours A newly developed ventilation system makes it a perfect choice for the touring rider. The lower air intake is reshaped, provides mouth & visor area with fresh air & is particularly airtight when closed. The upper ventilation has been designed with two air intakes compared to its predecessor, while above the slots in the rear area there are already air outlets. The rear ventilation with its three other air outlets also serves as a spoiler & "pulls" by this negative pressure formally the spent air from the helmet. Visor without hard edge The new CNS-3 visor stands out with its beveled edge in the upper area, which particularly prevents moisture from penetrating into the helmet interior. In addition, the visor seal has been redesigned & ensures a tight & tight seal between visor & outer shell. Different material thicknesses & a distortion-free, extra-large view characterize the injection molded CNS-3 visor made from polycarbonate. The integrated QSV-1 sun visor of the Neotec II can now also be optionally replaced with a yellow tinted, contrast-enhancing lens. Also, the cutout opening of the helmet shell was significantly reduced for the sun visor mechanism, whereby a significant increase in stability in this area was achieved. Function Prepared for a Sena communication system, perfectly integrated into the helmet No protruding control unit Helmet design is not affected by the system Safety Double closure for driving with open chin part Shell made from AIM EPS core system with two degrees of hardness Anti-fogging CNS 3 Pinlock system Stainless steel micro ratchet closure 360 ° folding mechanism lock made from stainless steel Double homologation P/J ECE 22.05 homologated Comfort QSV-1 sun visor 3 differently sized helmet shells 3 D Head pad, removable & washable Removable & washable chin strap pad Newly designed cheek padding

Includes:: Noise Isolator Deflector prevents ingress of wind Maximum noise reduction Optimal wearing comfort Ventilation Multiple ventilation Inlets on the top of the head & chin 2 outlets at the back Extremely enhanced airflow Aerodynamics Greatly enhanced performance Integrated spoiler Integrated vortex generator Novelist Chin Spoiler (Aero Deflector) Test ratings " Best Buy"
- Ride Magazine 07/2022 Note Please be aware, as long as nothing else is written in the item description: All helmets will be delivered only with the ECE certification by default, even if it is shown differently. all helmets that have a visor will be delivered with a clear visor, even if it is shown differently.


...

Please Note We are not allowed to ship this item outside the EU. Be one with nature As the successor of the very popular " Neotec" model presented at the end of 2011, the Neotec II now offers numerous new features & functions that are once again considered the new standard in the flip-up helmet segment. Especially the first complete integration of a communication solution for a SHOEI helmet is the special feature of this model. New flip-up helmet with pioneering design First of all, the striking design of the Neotec II is certainly striking. Its even more aggressive look in extremely compact design thanks to three different shell sizes, combined with perfect fit & maximum functionality, characterize this model. New lines, a flat finish of the visor & chin part, as well as the partial use of black components create a progressive & consistent overall picture. In order to fit as many motorcycle models as possible, the upper ventilation also serves as a spoiler for upright driving, while in a sportier & forward inclined driving position, the rear spoiler shape of the shell particularly achieves its stabilizing effect. Enjoy the comfort zone To make extra-long journeys even more enjoyable, we have once again optimized wearing comfort & reduced unwanted interference factors with the new Neotec II. Thanks to the " Noise Isolation" construction, the cheek pads, which have been developed in the wind tunnel, prevent the penetration of wind & thus enable a significantly quieter driving experience. If the stainless steel ratchet closure is closed, the Neotec II offers a very effective wind protection even down. The chin spoiler (Aero Deflector) for relaxed driving with low turbulence is also redesigned & stability-enhancing. The 3D-designed, completely removable & washable pad consists of several urethane foams in different degrees of hardness & thus offers a perfect fit & an extremely high wearing comfort. Revised flip-up mechanism As with its predecessor, the folding mechanism of the Neotec II is eccentrically shaped & provided with a variable axis to ensure optimal closure. The chin part is held up securely in its position by means of a now stronger mechanism, even when folded up. In addition, there is another rear snap-in position, which allows the P/J double homologation as a jet & full face helmet. The trigger button of the folding mechanism of the Neotec II was designed so that it can be operated well in the winter with thicker gloves. Incidentally, the rear edge of the chin part has a vortex generator, which noticeably calms the air flow at this transition. Sophisticated protection The Neotec II features an Advanced Integrated Matrix (AIM) shell made from five different fiberglass & organic layers. So an optimal compromise of maximum stability & simultaneous flexibility is achieved. Depending on the area, the core of the Neotec II also consists of several EPS elements of different hardness, optimally absorbing impact energy. For the first time an integrated communication Completely new to SHOEI is the ability to fully integrate an optional communication system into the helmet shell. In the case of the Neotec II, a separate, triangular-shaped control unit was provided on the lower helmet side, which was completely embedded in the helmet shell, thus enabling a homogeneous appearance. The leading manufacturer "SENA" is a partner of SHOEI & offers with its specially developed for the Neotec II SRL * -System (SHOEI Rider Link) the right intercom possibility in groundbreaking 3-button design. The SRL * chipset is based on SENA s 20S system & is currently the best communication solution on the market. Up to eight drivers can connect to each other with a maximum of 2 km range via Bluetooth 4.1, communicate with each other, listen to music, use the mobile phone or navigation system u.v.m. Enough air for long tours A newly developed ventilation system makes it a perfect choice for the touring rider. The lower air intake is reshaped, provides mouth & visor area with fresh air & is particularly airtight when closed. The upper ventilation has been designed with two air intakes compared to its predecessor, while above the slots in the rear area there are already air outlets. The rear ventilation with its three other air outlets also serves as a spoiler & "pulls" by this negative pressure formally the spent air from the helmet. Visor without hard edge The new CNS-3 visor stands out with its beveled edge in the upper area, which particularly prevents moisture from penetrating into the helmet interior. In addition, the visor seal has been redesigned & ensures a tight & tight seal between visor & outer shell. Different material thicknesses & a distortion-free, extra-large view characterize the injection molded CNS-3 visor made from polycarbonate. The integrated QSV-1 sun visor of the Neotec II can now also be optionally replaced with a yellow tinted, contrast-enhancing lens. Also, the cutout opening of the helmet shell was significantly reduced for the sun visor mechanism, whereby a significant increase in stability in this area was achieved. Function Prepared for a Sena communication system, perfectly integrated into the helmet No protruding control unit Helmet design is not affected by the system Safety Double closure for driving with open chin part Shell made from AIM EPS core system with two degrees of hardness Anti-fogging CNS 3 Pinlock system Stainless steel micro ratchet closure 360 ° folding mechanism lock made from stainless steel Double homologation P/J ECE 22.05 homologated Comfort QSV-1 sun visor 3 differently sized helmet shells 3 D Head pad, removable & washable Removable & washable chin strap pad Newly designed cheek padding

Includes:: Noise Isolator Deflector prevents ingress of wind Maximum noise reduction Optimal wearing comfort Ventilation Multiple ventilation Inlets on the top of the head & chin 2 outlets at the back Extremely enhanced airflow Aerodynamics Greatly enhanced performance Integrated spoiler Integrated vortex generator Novelist Chin Spoiler (Aero Deflector) Test ratings " Best Buy"
- Ride Magazine 07/2022 Note Please be aware, as long as nothing else is written in the item description: All helmets will be delivered only with the ECE certification by default, even if it is shown differently. all helmets that have a visor will be delivered with a clear visor, even if it is shown differently.


...

Please Note We are not allowed to ship this item outside the EU. Be one with nature As the successor of the very popular " Neotec" model presented at the end of 2011, the Neotec II now offers numerous new features & functions that are once again considered the new standard in the flip-up helmet segment. Especially the first complete integration of a communication solution for a SHOEI helmet is the special feature of this model. New flip-up helmet with pioneering design First of all, the striking design of the Neotec II is certainly striking. Its even more aggressive look in extremely compact design thanks to three different shell sizes, combined with perfect fit & maximum functionality, characterize this model. New lines, a flat finish of the visor & chin part, as well as the partial use of black components create a progressive & consistent overall picture. In order to fit as many motorcycle models as possible, the upper ventilation also serves as a spoiler for upright driving, while in a sportier & forward inclined driving position, the rear spoiler shape of the shell particularly achieves its stabilizing effect. Enjoy the comfort zone To make extra-long journeys even more enjoyable, we have once again optimized wearing comfort & reduced unwanted interference factors with the new Neotec II. Thanks to the " Noise Isolation" construction, the cheek pads, which have been developed in the wind tunnel, prevent the penetration of wind & thus enable a significantly quieter driving experience. If the stainless steel ratchet closure is closed, the Neotec II offers a very effective wind protection even down. The chin spoiler (Aero Deflector) for relaxed driving with low turbulence is also redesigned & stability-enhancing. The 3D-designed, completely removable & washable pad consists of several urethane foams in different degrees of hardness & thus offers a perfect fit & an extremely high wearing comfort. Revised flip-up mechanism As with its predecessor, the folding mechanism of the Neotec II is eccentrically shaped & provided with a variable axis to ensure optimal closure. The chin part is held up securely in its position by means of a now stronger mechanism, even when folded up. In addition, there is another rear snap-in position, which allows the P/J double homologation as a jet & full face helmet. The trigger button of the folding mechanism of the Neotec II was designed so that it can be operated well in the winter with thicker gloves. Incidentally, the rear edge of the chin part has a vortex generator, which noticeably calms the air flow at this transition. Sophisticated protection The Neotec II features an Advanced Integrated Matrix (AIM) shell made from five different fiberglass & organic layers. So an optimal compromise of maximum stability & simultaneous flexibility is achieved. Depending on the area, the core of the Neotec II also consists of several EPS elements of different hardness, optimally absorbing impact energy. For the first time an integrated communication Completely new to SHOEI is the ability to fully integrate an optional communication system into the helmet shell. In the case of the Neotec II, a separate, triangular-shaped control unit was provided on the lower helmet side, which was completely embedded in the helmet shell, thus enabling a homogeneous appearance. The leading manufacturer "SENA" is a partner of SHOEI & offers with its specially developed for the Neotec II SRL * -System (SHOEI Rider Link) the right intercom possibility in groundbreaking 3-button design. The SRL * chipset is based on SENA s 20S system & is currently the best communication solution on the market. Up to eight drivers can connect to each other with a maximum of 2 km range via Bluetooth 4.1, communicate with each other, listen to music, use the mobile phone or navigation system u.v.m. Enough air for long tours A newly developed ventilation system makes it a perfect choice for the touring rider. The lower air intake is reshaped, provides mouth & visor area with fresh air & is particularly airtight when closed. The upper ventilation has been designed with two air intakes compared to its predecessor, while above the slots in the rear area there are already air outlets. The rear ventilation with its three other air outlets also serves as a spoiler & "pulls" by this negative pressure formally the spent air from the helmet. Visor without hard edge The new CNS-3 visor stands out with its beveled edge in the upper area, which particularly prevents moisture from penetrating into the helmet interior. In addition, the visor seal has been redesigned & ensures a tight & tight seal between visor & outer shell. Different material thicknesses & a distortion-free, extra-large view characterize the injection molded CNS-3 visor made from polycarbonate. The integrated QSV-1 sun visor of the Neotec II can now also be optionally replaced with a yellow tinted, contrast-enhancing lens. Also, the cutout opening of the helmet shell was significantly reduced for the sun visor mechanism, whereby a significant increase in stability in this area was achieved. Function Prepared for a Sena communication system, perfectly integrated into the helmet No protruding control unit Helmet design is not affected by the system Safety Double closure for driving with open chin part Shell made from AIM EPS core system with two degrees of hardness Anti-fogging CNS 3 Pinlock system Stainless steel micro ratchet closure 360 ° folding mechanism lock made from stainless steel Double homologation P/J ECE 22.05 homologated Comfort QSV-1 sun visor 3 differently sized helmet shells 3 D Head pad, removable & washable Removable & washable chin strap pad Newly designed cheek padding

Includes:: Noise Isolator Deflector prevents ingress of wind Maximum noise reduction Optimal wearing comfort Ventilation Multiple ventilation Inlets on the top of the head & chin 2 outlets at the back Extremely enhanced airflow Aerodynamics Greatly enhanced performance Integrated spoiler Integrated vortex generator Novelist Chin Spoiler (Aero Deflector) Test ratings " Best Buy"
- Ride Magazine 07/2022 Note Please be aware, as long as nothing else is written in the item description: All helmets will be delivered only with the ECE certification by default, even if it is shown differently. all helmets that have a visor will be delivered with a clear visor, even if it is shown differently.


...

Please Note We are not allowed to ship this item outside the EU. The SRL-EXT provides both Mesh Intercom™ & traditional 4-way Bluetooth intercom. Sena s industry-leading Mesh Intercom™ communication platform has two modes: Multi-Channel Open Mesh Intercom™ (Open Mesh) & Group Mesh Intercom™. Open Mesh enables connection to the Mesh Intercom™ network with a single button press & offers the industry s first Mesh Intercom™ channel system. Like traditional handheld or CB radios, Open Mesh allows users to switch between nine channels. It also supports a virtually unlimited number of users within a range of up to 8 km (minimum 6 subscribers at 1 km distance). Group Mesh supports a single, private group for up to 24 participants & the same range as Open Mesh for a more personal group conversation. Only invited users can join the Group Mesh chat. Open Mesh & Group Mesh provide unprecedented intercom audio quality & robust connectivity. The SRL-EXT is the perfect communication syste... ...

With the SRL intercom adapter set, it is possible to attach the SRL/ SRL2/ SRL Mesh communication system generations to the new generation of helmets (Neotec 3, GT-AIR3) & continue using the existing intercoms. Suitable for Shoei Neotec 3 Shoei GT-Air 3 Note The external mounting of the old systems does not comply with the official requirements of E22/06. ...

Optimal Integration Designed jointly by Sena & Shoei, the SRL2 is a commuication system tailored specifically to the Shoei Neotec II helmet – is the upgraded version of the wildly popular Neotec modular helmet. The SRL2 is virtually undetectable from the outside of the helmet, & functions with a simple 3-button control. Connectivity Simplified A dual Bluetooth chip allows for up to 8 intercom connections as well as simultaneously listen to music & talk to other riders via Intercom using Audio Multitasking. When audio comes through the Intercom music will automatically decrease in volume, & return to a normal volume when riders stop talking over the Intercom. Simply pair the SRL2 with your smartphone to stream music, listen to GPS directions, & take & make phone calls. A Feature Set to Keep you Moving in the Right Direction Take your ride up a notch with the stellar feature set of the SRL2. In addition to the the Universal & Group Intercom features, the SRL2 offers music sharing & Sena’s Advanced Noise Control technology. Smart volume regulates the volume of your music when the environment outside of your helmet changes, due to wind noise or increased speed. Built in FM radio lets riders easily scan through & save radio stations. Stay connected & in control with the Sena Smartphone app Linking the SRL2 with the Sena Smartphone App (for iPhone & Android) means that you can configure device settings & access our quick guide at the click of a button. The SRL2 can also easily connect to the Sena Ride Connected App to intercom with a virtually limitless amount of riders over an infinite range, so long as you are connected to a mobile network. General Talk time: 10 hours Operating temperature: -10C ~ 55C (14°F ~ 131°F) Dimensions: Speaker: driver unit unit 31.9 mm – thickness 4.4 mm Wire mic Wire between speakers: length 85 mm Weight: Module: 100 g (3.53 oz) Bluetooth Headset Profile (HSP) Hands-Free Profile (HFP) Advanced Audio Distribution Profile (A2DP) Audio Video Remote Control Profile (AVRCP) Bluetooth 4.1 Intercom Working distance: up to 1.6 kilometers (1.0 mile) in open terrain Audio Advanced Noise Control™ Built-in SBC Codec Wide volume control Sample rate: max. 48 k Hz (DAC) FM Radio Built-in FM radio with RDS AF (Radio Data System Alternate Frequencies) Radio region: worldwide Radio frequency specifications: 64 ~ 108 M Hz 10 preset station memory with automatic scan function Battery Charging time: 2.5 hours Type: Lithium polymer In the Box SRL2 Headset Microphone Sponges USB (Universal Serial Bus) Power & Data Cable (Micro USB (Universal Serial Bus) Type) ...

Please Note We are not allowed to ship this item outside the EU. Optimal Integration Designed jointly by Sena & Shoei, the SRL2 is a commuication system tailored specifically to the Shoei Neotec II helmet – is the upgraded version of the wildly popular Neotec modular helmet. The SRL2 is virtually undetectable from the outside of the helmet, & functions with a simple 3-button control. Connectivity Simplified A dual Bluetooth chip allows for up to 8 intercom connections as well as simultaneously listen to music & talk to other riders via Intercom using Audio Multitasking. When audio comes through the Intercom music will automatically decrease in volume, & return to a normal volume when riders stop talking over the Intercom. Simply pair the SRL2 with your smartphone to stream music, listen to GPS directions, & take & make phone calls. A Feature Set to Keep you Moving in the Right Direction Take your ride up a notch with the stellar feature set of the SRL2. In addition to the t... ...

Please note We are not allowed to ship this item outside the EU. A communication system in its most beautiful form
- the most inconspicuous.
...

Safety Shell in AIM Organic fibreglass in various layers for a shock-absorbent shell with optimum rigidity. Comfort 2 different outer shell constructions. For perfect fit & compact

Dimensions. Low weight of only 1, 050 g (+/-50g) (+/-50 g) for size M, to reduce neck muscle fatigue. Detachable & washable interior liner, For simple cleaning. Detachable & height-adjustable shield For individual adjustment. Ventilation Ventilation with separate, closable inlet & outlet vents Note Please note that as long as nothing else is written in the article description, all helmets that have a visor as standard will be delivered with a clear one, even if it is shown differently.

...