SAS-TEC SC-1/K101 shoulder, ellbow & knee protector kids (pair) Features Level 1 Shoulders, elbows, knees Approx. 25 g ...

Due to its intelligent design, even at low temperatures highly flexible visco-elastic soft foam protector with very good damping performance: residual force around 25 k N (standard, level 1: 35 k N). Extremely flat construction, thus almost invisible under clothing. SAS-TEC recommends these protectors for use in shoulder, elbow knee & hip areas. High-end engineering for greater safety. Features Article: SC-1/KA Weight: ca. 45 gr. / item Delivery: in pairs Color yellow or black according to availability

Dimensions (L/W/H): ca. 205/135/6 mm Protection level: 1 (mean value below 35 k N) Protection area: S/E/K Type A, H Type B Design: Symmetrical Protectors surpass the required values of EN 1621-1:2012, level 1 Protectors are not destroyed by an impact & can still be used Protectors are lightweight Protectors are washable (remove, hand launder separately / water absorption less than one per cent)

...

Excellent ventilated, highly flexible 3D protector made from injection-molded plastic with almost temperature-independent impact absorption properties: average residual force over all temperature ranges (-10°C, 23°C, 40°C) a good 25% below the permissible limit (standard EN 1621-1:2012, level 1: 35 k N). Suitable for leather & textile garments. Sa S-Tec recommends using this extremely flat protector in the shoulder, elbow & knee areas. High-end technology for even more safety. Features Protectors undercut the prescribed standard EN 1621-1:2012, Level 1 by about 25 percent Protectors are highly flexible Protectors are excellently ventilated Protectors are washable Article: SC-5/01 Weight: approx. 90 gr./piece

Dimensions (L/W/H): approx. 205/140/6, 5 mm Protection level: 1 (average residual force under 35 k N) Protection level: S/E/K TYPE A Symmetrical

...

3D protector made from viscoelastic soft foam with very good impact absorption values: residual force under 20 k N. Due to its flat design, it is hardly noticeable & is ideally suited for close-fitting textile clothing. We recommend using this protector in the shoulder, elbow & knee areas. High-end technology for even more safety. Article: SCL-1 Delivery: in pairs Weight: approx. 69 gr. / piece

Dimensions (L/W/H): approx. 240/150/11 mm Protection level: 2 (average residual force under 20 k N) Protection area: shoulders/elbows/knees S/E/K type B Features Protectors undercut the prescribed standard EN 1621-1:2012, level 2 Protectors are not destroyed by the impact, so they can still be used Protectors are lightweight Protectors are washable (remove, separate hand wash/ water absorption less than one percent)

...

3D protector made from particularly flexible, viscoelastic soft foam with excellent impact absorption values: residual force according to EN 1621-2 around 13 k N (limit value Level 1: 18 k N). Anatomically perfectly adapted, hardly noticeable. High-end technology for even more safety. This thin version of the SCL is particularly suitable for lightweight motorcycle clothing, for winter sports enthusiasts & for use in mountain biking & roller sports. Thanks to gentle edge gradients, the SCL series hardly stands out under the clothing
- the protectors remain almost invisible.

Dimensions Order size

Dimensions L / B / H ca. Weight ca. S 320 / 180 / 19 mm 175 gr. M 360 / 205 / 19 mm 205 gr. M/L 405 / 225 / 19 mm 280 gr. L 450 / 245 / 19 mm 325 gr. XL 505 / 265 / 19 mm 415 gr.




...

3D protector made from particularly flexible, viscoelastic soft foam with excellent impact absorption values: residual force according to EN 1621-2 around 13 k N (limit value Level 1: 18 k N). Anatomically perfectly adapted, hardly noticeable. High-end technology for even more safety. This thin version of the SCL is particularly suitable for lightweight motorcycle clothing, for winter sports enthusiasts & for use in mountain biking & roller sports. Thanks to gentle edge gradients, the SCL series hardly stands out under the clothing
- the protectors remain almost invisible.

Dimensions Order size

Dimensions L / B / H ca. Weight ca. S 320 / 180 / 19 mm 175 gr. M 360 / 205 / 19 mm 205 gr. M/L 405 / 225 / 19 mm 280 gr. L 450 / 245 / 19 mm 325 gr. XL 505 / 265 / 19 mm 415 gr.




...

3D protector made from particularly flexible, viscoelastic soft foam with excellent impact absorption values: residual force according to EN 1621-2 around 13 k N (limit value Level 1: 18 k N). Anatomically perfectly adapted, hardly noticeable. High-end technology for even more safety. This thin version of the SCL is particularly suitable for lightweight motorcycle clothing, for winter sports enthusiasts & for use in mountain biking & roller sports. Thanks to gentle edge gradients, the SCL series hardly stands out under the clothing
- the protectors remain almost invisible.

Dimensions Order size

Dimensions L / B / H ca. Weight ca. S 320 / 180 / 19 mm 175 gr. M 360 / 205 / 19 mm 205 gr. M/L 405 / 225 / 19 mm 280 gr. L 450 / 245 / 19 mm 325 gr. XL 505 / 265 / 19 mm 415 gr.




...

3D protector made from particularly flexible, viscoelastic soft foam with excellent impact absorption values: residual force according to EN 1621-2 around 13 k N (limit value Level 1: 18 k N). Anatomically perfectly adapted, hardly noticeable. High-end technology for even more safety. This thin version of the SCL is particularly suitable for lightweight motorcycle clothing, for winter sports enthusiasts & for use in mountain biking & roller sports. Thanks to gentle edge gradients, the SCL series hardly stands out under the clothing
- the protectors remain almost invisible.

Dimensions Order size

Dimensions L / B / H ca. Weight ca. S 320 / 180 / 19 mm 175 gr. M 360 / 205 / 19 mm 205 gr. M/L 405 / 225 / 19 mm 280 gr. L 450 / 245 / 19 mm 325 gr. XL 505 / 265 / 19 mm 415 gr.




...

3D protector made from particularly flexible, viscoelastic soft foam with excellent impact absorption values: residual force according to EN 1621-2 around 13 k N (limit value Level 1: 18 k N). Anatomically perfectly adapted, hardly noticeable. High-end technology for even more safety. This thin version of the SCL is particularly suitable for lightweight motorcycle clothing, for winter sports enthusiasts & for use in mountain biking & roller sports. Thanks to gentle edge gradients, the SCL series hardly stands out under the clothing
- the protectors remain almost invisible.

Dimensions Order size

Dimensions L / B / H ca. Weight ca. S 320 / 180 / 19 mm 175 gr. M 360 / 205 / 19 mm 205 gr. M/L 405 / 225 / 19 mm 280 gr. L 450 / 245 / 19 mm 325 gr. XL 505 / 265 / 19 mm 415 gr.




...

3D protector made from particularly flexible, viscoelastic soft foam with excellent impact absorption values: residual force according to EN 1621-2 below 8 k N (limit value Level 2: 9 k N). Anatomically perfectly adapted, hardly noticeable. High-end technology for even more safety. The more powerful version of the SCL is suitable for all areas of use where maximum protection for the back is important. Thanks to gentle edge gradients, the SCL series is barely noticeable under clothing
- the protectors remain virtually invisible.

Dimensions Order size

Dimensions L / B / H ca. Weight ca. S 320 / 180 / 19 mm 175 gr. M 360 / 205 / 19 mm 205 gr. M/L 405 / 225 / 19 mm 280 gr. L 450 / 245 / 19 mm 325 gr. XL 505 / 265 / 19 mm 415 gr.




...