Innovative level 2 back protector made from viscoelastic soft foam in SAS-TEC-protected Tripleflex design. The extremely flexible full-back protector has numerous ventilation openings & adapts easily to every body contour & movement. Adapts perfectly to the anatomy, barely noticeable. High-end technology for even more safety. Safety 3D protector made from viscoelastic soft foam Protection level: 2 With excellent impact absorption values: residual force according to EN 1621-2 below 7 k N (limit value level 2: 9 k N) High-end technology for even more safety Protectors are not destroyed by the impact, so they can still be used Protectors are washable (remove, wash separately by hand/water absorption of less than one percent) Weather Ventilation holes Comfort Anatomically perfect fit, barely noticeable Thanks to the smooth edges, the SCL series is barely visible under clothing
- the protectors remain almost invisible Size M

Dimensions (L/W/H): approx. 430/270/17 mm Weight: approx. 390 g Si...


...

Innovative level 2 back protector made from viscoelastic soft foam in SAS-TEC-protected Tripleflex design. The extremely flexible full-back protector has numerous ventilation openings & adapts easily to every body contour & movement. Adapts perfectly to the anatomy, barely noticeable. High-end technology for even more safety. Safety 3D protector made from viscoelastic soft foam Protection level: 2 With excellent impact absorption values: residual force according to EN 1621-2 below 7 k N (limit value level 2: 9 k N) High-end technology for even more safety Protectors are not destroyed by the impact, so they can still be used Protectors are washable (remove, wash separately by hand/water absorption of less than one percent) Weather Ventilation holes Comfort Anatomically perfect fit, barely noticeable Thanks to the smooth edges, the SCL series is barely visible under clothing
- the protectors remain almost invisible Size M

Dimensions (L/W/H): approx. 430/270/17 mm Weight: approx. 390 g Si...


...

SAS-TEC SC-1/K101 shoulder, ellbow & knee protector kids (pair) Features Level 1 Shoulders, elbows, knees Approx. 25 g ...

Due to its intelligent design, even at low temperatures highly flexible visco-elastic soft foam protector with very good damping performance: residual force around 25 k N (standard, level 1: 35 k N). Extremely flat construction, thus almost invisible under clothing. SAS-TEC recommends these protectors for use in shoulder, elbow knee & hip areas. High-end engineering for greater safety. Features Article: SC-1/KA Weight: ca. 45 gr. / item Delivery: in pairs Color yellow or black according to availability

Dimensions (L/W/H): ca. 205/135/6 mm Protection level: 1 (mean value below 35 k N) Protection area: S/E/K Type A, H Type B Design: Symmetrical Protectors surpass the required values of EN 1621-1:2012, level 1 Protectors are not destroyed by an impact & can still be used Protectors are lightweight Protectors are washable (remove, hand launder separately / water absorption less than one per cent)

...

Excellent ventilated, highly flexible 3D protector made from injection-molded plastic with almost temperature-independent impact absorption properties: average residual force over all temperature ranges (-10°C, 23°C, 40°C) a good 25% below the permissible limit (standard EN 1621-1:2012, level 1: 35 k N). Suitable for leather & textile garments. Sa S-Tec recommends using this extremely flat protector in the shoulder, elbow & knee areas. High-end technology for even more safety. Features Protectors undercut the prescribed standard EN 1621-1:2012, Level 1 by about 25 percent Protectors are highly flexible Protectors are excellently ventilated Protectors are washable Article: SC-5/01 Weight: approx. 90 gr./piece

Dimensions (L/W/H): approx. 205/140/6, 5 mm Protection level: 1 (average residual force under 35 k N) Protection level: S/E/K TYPE A Symmetrical

...

3D protector made from particularly flexible, viscoelastic soft foam with excellent impact absorption values: residual force according to EN 1621-2 around 13 k N (limit value Level 1: 18 k N). Anatomically perfectly adapted, hardly noticeable. High-end technology for even more safety. This thin version of the SCL is particularly suitable for lightweight motorcycle clothing, for winter sports enthusiasts & for use in mountain biking & roller sports. Thanks to gentle edge gradients, the SCL series hardly stands out under the clothing
- the protectors remain almost invisible.

Dimensions Order size

Dimensions L / B / H ca. Weight ca. S 320 / 180 / 19 mm 175 gr. M 360 / 205 / 19 mm 205 gr. M/L 405 / 225 / 19 mm 280 gr. L 450 / 245 / 19 mm 325 gr. XL 505 / 265 / 19 mm 415 gr.




...

3D protector made from particularly flexible, viscoelastic soft foam with excellent impact absorption values: residual force according to EN 1621-2 around 13 k N (limit value Level 1: 18 k N). Anatomically perfectly adapted, hardly noticeable. High-end technology for even more safety. This thin version of the SCL is particularly suitable for lightweight motorcycle clothing, for winter sports enthusiasts & for use in mountain biking & roller sports. Thanks to gentle edge gradients, the SCL series hardly stands out under the clothing
- the protectors remain almost invisible.

Dimensions Order size

Dimensions L / B / H ca. Weight ca. S 320 / 180 / 19 mm 175 gr. M 360 / 205 / 19 mm 205 gr. M/L 405 / 225 / 19 mm 280 gr. L 450 / 245 / 19 mm 325 gr. XL 505 / 265 / 19 mm 415 gr.




...

3D protector made from particularly flexible, viscoelastic soft foam with excellent impact absorption values: residual force according to EN 1621-2 around 13 k N (limit value Level 1: 18 k N). Anatomically perfectly adapted, hardly noticeable. High-end technology for even more safety. This thin version of the SCL is particularly suitable for lightweight motorcycle clothing, for winter sports enthusiasts & for use in mountain biking & roller sports. Thanks to gentle edge gradients, the SCL series hardly stands out under the clothing
- the protectors remain almost invisible.

Dimensions Order size

Dimensions L / B / H ca. Weight ca. S 320 / 180 / 19 mm 175 gr. M 360 / 205 / 19 mm 205 gr. M/L 405 / 225 / 19 mm 280 gr. L 450 / 245 / 19 mm 325 gr. XL 505 / 265 / 19 mm 415 gr.




...

3D protector made from particularly flexible, viscoelastic soft foam with excellent impact absorption values: residual force according to EN 1621-2 around 13 k N (limit value Level 1: 18 k N). Anatomically perfectly adapted, hardly noticeable. High-end technology for even more safety. This thin version of the SCL is particularly suitable for lightweight motorcycle clothing, for winter sports enthusiasts & for use in mountain biking & roller sports. Thanks to gentle edge gradients, the SCL series hardly stands out under the clothing
- the protectors remain almost invisible.

Dimensions Order size

Dimensions L / B / H ca. Weight ca. S 320 / 180 / 19 mm 175 gr. M 360 / 205 / 19 mm 205 gr. M/L 405 / 225 / 19 mm 280 gr. L 450 / 245 / 19 mm 325 gr. XL 505 / 265 / 19 mm 415 gr.




...

3D protector made from particularly flexible, viscoelastic soft foam with excellent impact absorption values: residual force according to EN 1621-2 around 13 k N (limit value Level 1: 18 k N). Anatomically perfectly adapted, hardly noticeable. High-end technology for even more safety. This thin version of the SCL is particularly suitable for lightweight motorcycle clothing, for winter sports enthusiasts & for use in mountain biking & roller sports. Thanks to gentle edge gradients, the SCL series hardly stands out under the clothing
- the protectors remain almost invisible.

Dimensions Order size

Dimensions L / B / H ca. Weight ca. S 320 / 180 / 19 mm 175 gr. M 360 / 205 / 19 mm 205 gr. M/L 405 / 225 / 19 mm 280 gr. L 450 / 245 / 19 mm 325 gr. XL 505 / 265 / 19 mm 415 gr.




...