More From Contributor

The RAM-B-346U base fits cleanly over your existing brake/clutch reservoir cover with the B size 1" / 25 mm rubber ball offset. made from die-cast aluminum with an overmolded rubber ball, both form & function are unsurpassed. Installation is simple & all necessary hardware is included. The mount is NOT an additional reservoir cover, but instead a plate that mounts above the cover using the screw holes & longer screws of the cover. The kit

Includes:: three sets of screws of differing lengths. The center two slots are 2 7/16" / 62 mm center to center & are just under a 0.5" / 12.5 mm long. This mount is not compatible with the 2016 BMW R1200RT. Features Fits over your motorcycle s existing brake/clutch reservoir cover,

Includes:: set of M4 x 35, M4 x 30, & M4 x 20 screws Included B size 1" / 25 mm RAM® rubber ball allows for connection to any B size RAM® double socket arm, ball & socket technology allows for near-infinite adjustability made from Powder-coated, marine-grade aluminum f...

...

Available

The RAM-B-201-A, short double socket arm, has a socket at both ends that accommodate 1" / 25 mm ball bases. A single spring inside the arm opens the end sockets, allowing you to pivot the ball & socket connection. This socket technology allows for almost infinite adjustment & perfect viewing angles. The knob has a locking Acorn nut that prevents the mount from being removed from the socket. This feature allows for a secure mount while giving the ability to adjust your device without the ability to remove the device.

Dimensions Ball size B 1" / 25 mm Socket distance 1.75" / 45 mm Overall length 2.42" / 50 mm Weight capacity Standard use: 2 lbs / 900 gr. Heavy-duty use: 1 lb / 450 gr.

...

Available

The RAM-B-108BU consists of a B size 1" / 25 mm rubber ball connected at a right angle to a V-shaped base, & accommodates rails from 1" to 2.1" in diameter. To mount the RAM-B-108BU base, place the saddle-shaped plate on the rail & then wrap the metal clamp strap around the rail & plate. Tighten the knob on the metal strap with a screwdriver until it has a firm hold on the rail. Features Saddle-shaped clamp-mount ideal for rails ranging from 1" to 2.1" in diameter Included B size 1" / 25 mm RAM® rubber ball allows for connection to any B size RAM® double socket arm, ball & socket technology allows for near-infinite adjustability made from Powder-coated, marine-grade aluminum for durability & reliability in the most demanding marine environments Hardware included 1 20 Worm drive strap clamp 1 28 Worm drive strap clamp 1 6" rubber strip

Dimensions B size Ball 1" / 25 mm Clamp range 1"
- 2.1" / 25
- 53 mm diameter Weight capacity Standard use: 2 lbs / 900 gr. Heavy-duty use: 1 l...

...

Available

The RAM Gas Tank base is a low-profile way to get a unique perspective from your camera or to attach your electronic device where it can be quickly accessible. This powder coated aluminum base mounts directly to the stock gas tank of any listed compatible motorcycles. The hardware you need to mount to the fill port is included. Hardware included 4 M5-0.8 x 40 mm socket head cap screws 3 M5-0.8 x 25 mm socket head cap screws 4 M5 stainless steel washers

Dimensions B size Ball 1" / 25 mm To ensure proper fit use the measuring guide, tank bolts distance for this part will be 4" Weight capacity Standard use: 2 lbs / 900 gr. Heavy-duty use: 1 lb / 450 gr. Suitable for Manufacturer Model Model year BMW 900 RT 05 SF 2005/2006, 2009/2010 BMW F 650 CS 1999, 2001-2005 BMW F 650 GS 2000-2008 BMW F 650 GS Dakar 2000-2007 BMW G 650 GS 2008-2010 BMW HP2 Enduro 2005-2007 BMW HP2 Megamoto 2007-2009 BMW K 1200 GT 2002-2009 BMW K 1200 R 2004-2009 BMW K 1200 R Sport 2005-2008 BMW K 1200 RS 1996-2005 BMW...

...

Available

The RAM Gas Tank base is a low-profile way to get a unique perspective from your camera or to attach your electronic device where it can be quickly accessible. This powder coated aluminum base mounts directly to the stock gas tank of any listed compatible motorcycles. The hardware you need to mount to the fill port is included. Hardware included 3 M6-1.0 x 25 mm socket head cap screw 3 M5-0.8 x 3.5cm socket head cap screw 4 M5-0.8 x 45 mm socket head cap screw 3 M5-0.8 x 25 mm socket head cap screw 3 M5-0.8 x 20 mm socket head cap screw 3 M5-0.8 x 16 mm socket head cap screw 4 M5 stainless steel washers 3 M6 stainless steel washers

Dimensions B size Ball 1" / 25 mm To ensure proper fit use the measuring guide, tank bolts distance for this part will be 4" Weight capacity Standard use: 2 lbs / 900 gr. Heavy-duty use: 1 lb / 450 gr. Suitable for Manufacturer Model Model year Honda CB500 2016 Honda CBR500 2016 Honda CBR650 2014-2016 Honda CBR1000 2014-2016 Honda NC700 2016 Honda VFR1200 20...

...

Available

The RAM® Torque™ handlebar mounting base features a 1" / 25 mm B size RAM® rubber ball & is compatible with rails 3/4” to 1” / 19
-
...

Available

The RAM® Torque™ small rail base features a B size 1” / 25 mm rubber ball & accommodates rails from 3/8” to 5/8” / 9
- 16 mm in
...

Available

The RAP-B-379U-252025 consists of a 1" / 25 mm diameter rubber ball connected to a 1/4"-20 x. 25" male threaded post. The male thread matches most standard camera & camcorder female threads found on the bottom of these devices. Features RAM® Tough-Ball™ features a 1/4"-20 x. 25" male threaded post for connection to a variety of devices Included B size 1" / 25 mm RAM® rubber balls allows for connection to any B size RAM® double socket arm, ball & socket technology allows for near-infinite adjustability made from high-strength composites with stainless steel thread post for durability & reliability in the most demanding environments

Dimensions Thread pitch 1/4"-20 x. 25" B size Ball 1" / 25 mm Weight capacity Standard use: 2 lbs / 900 gr. Heavy-duty use: 1 lb / 450 gr.

...

Available

The RAP-B-379U-M616 consists of a 1" / 25 mm diameter rubber ball connected to a M6x 1 x 6 mm male threaded post. Features RAM® Tough-Ball™ features a M6x 1 x 6 mm male threaded post for connection to a variety of devices Included B size 1" / 25 mm RAM® rubber balls allows for connection to any B size RAM® double socket arm, ball & socket technology allows for near-infinite adjustability made from high-strength composites with stainless steel thread post for durability & reliability in the most demanding environments

Dimensions Thread pitch M6x 1, 6 mm long B size Ball 1" / 25 mm Weight capacity Standard use: 2 lbs / 900 gr. Heavy-duty use: 1 lb / 450 gr.

...

Available

The RAM® Tough-Charge™ with X-Grip® Technology is the world s first patented, universal waterproof wireless charging cradle for phones. Designed with spring-loaded RAM® X-Grip® Technology, this cradle features an X design that expands & contracts to secure nearly any phone while taking advantage of QI compatible wireless phone charging. All four arms feature rubber-coated caps that hold your phone firmly in place, & the open design keeps buttons & switches accessible on the sides of phones. To insert your device, simply squeeze the arms on one side of the cradle & place your phone inside before releasing the arms. This QI compatible wireless charging cradle ensures your compatible phone charges no matter what position it’s placed at. For added security & peace of mind, a device tether is included that’s recommended for outdoor applications. In addition, a support leg can be adjusted to the ideal position or removed altogether. This RAM® Tough-Charge™ with X-Grip® Technology w... ...

Available

Ram Mount Torque L, Ball Mount

The large version of the RAM® Torque™ handlebar mounting base features a 1" / 25 mm B size RAM® rubber ball and is compatible with rails 1 1/8” to 1 1/2" / 28 - 38 mm in diameter. Sizing inserts are included to provide a tight fit while also protecting the mounting surface. The large RAM® Torque™ mounting base also includes nylon-insert locknuts to prevent loosening in high vibration environments. Hardware included 2 10-24 x 1" socket head cap screws 2 10-24 Nylock nuts 2 1.12" split reducing bushings 2 1.27" split reducing bushings 1 5/32" hex key wrench 1 127 mm x 17 mm rubber adhesive strip Features Handlebar mounting base with B size 1" / 25 mm rubber ball accommodates rails 1 1/8" to 1 1/2" in diameter Includes sizing inserts to provide a tight fit while protecting the
mounting surface, mount includes nylon-insert locknuts to prevent loosening Made of powder-coated, marine-grade aluminum for durability and reliability in the most demanding environments Dimensions Clamp range 1 1...

Availability: In Stock
Supplier: Motoin SE
SKU: se-11074602-001

Description Reviews / Comments Add New

Product Description

The large version of the RAM® Torque™ handlebar mounting base features a 1" / 25 mm B size RAM® rubber ball & is compatible with rails 1 1/8” to 1 1/2" / 28
- 38 mm in diameter. Sizing inserts are included to provide a tight fit while also protecting the mounting surface. The large RAM® Torque™ mounting base also

Includes:: nylon-insert locknuts to prevent loosening in high vibration environments. Hardware included 2 10-24 x 1" socket head cap screws 2 10-24 Nylock nuts 2 1.12" split reducing bushings 2 1.27" split reducing bushings 1 5/32" hex key wrench 1 127 mm x 17 mm rubber adhesive strip Features Handlebar mounting base with B size 1" / 25 mm rubber ball accommodates rails 1 1/8" to 1 1/2" in diameter

Includes:: sizing inserts to provide a tight fit while protecting the mounting surface, mount

Includes:: nylon-insert locknuts to prevent loosening made from powder-coated, marine-grade aluminum for durability & reliability in the most demanding environments

Dimensions Clamp range 1 1...

Reviews/Comments

Add New

Jargon Buster

RAM - Random Access memory

Nylon - A family of synthetic polymers

Diameter - A measurement across a circle passing through the middle

rubber - Synthetic rubber is any artificial elastomer, usually a polymer, and is used as a substitute for natural rubber.

rubber - Natural rubber is an elastomer derived from the latex containing sap of some plants.

Key - A physical or virtual device or code used for opening something

Screws - A simple device use for physically attaching two objects together

Torque - Torque is a measure of the turning force of an object. Such as a wrench turning a bolt, the higher the toque the higher the capability of undoing a tight bolt.

Size - is the measurement of how big an object is in space.

Large - something that takes up more space than normal.

Tight - The opposite to loose

Powder - a object formed from many tiny pieces.

Dimensions - The shapes and angles of something or a situation.

Head - The upper part of a body typically separated by the neck.

Torque - The force used to turn, rotate, an object about an axis. The higher the torque the greater the ability to turn.

More From Contributor

Ram Mount Torque L, Ball Mount

Product Description

Reviews/Comments

Add New

Intelligent Comparison

Price History

Vouchers

Facebook

Jargon Buster

Supplier Information

Community Generated Product Tags

Contact Us

Information

My Account