More From Contributor

kr3653.29
The new comfort flip-up helmet continues the development of its predecessor Nolan N104 Absolutely consistently & impresses with its elegant design, numerous technical features & a huge selection of colors & decors. Its compact

Dimensions (thanks to two different shell sizes), double P/J homologation, an ultra-wide visor, adjustable in different positions sun visor, airbooster technology for optimal ventilation, the patented elliptical opening mechanism & much more make the Nolan N100.5 for reference in the class of flip-up helmet all-rounders. Shell Polycarbonate shell 2 outer shell sizes 6 inner shell sizes Visor Scratch resistant treatement on both sides With adjustable pins Pinlock type FSB (4l) in the box Quick release shield system Vision protection system Scratch resistant & fog resistant treatements on both sides UV 400 protection N-Com compatibility Ready for N-com (B901L R series, B901 R series, B1.4, MSC III R series, ESS) Ready for ESS
- Emergency Stop Signal N-com keypad adapters Ventilation system Airbooster technology Top ventilation Chin guard air intake Rear air exhaust Retention system Microlock² Comfort padding Removable & washable Antibacterial treatment Removable clima comfort top Removable cheek pads Removable neck roll other Features Wind protector Top helmet bag Protective hard coating on the vanish Microlock² (patented) Double lever retention system with micrometric adjustment. This system consists of a thermoplastic ergonomic opening lever, & of a second aluminium toothed & holding lever. The toothed lever releases the micrometric strip, thus the chin strap can only be open with a very broad rotation of the opening lever. This device minimizes the possibility of unintentional opening of the retention system. Pinlock® Fog-Resistant inner visor Supplied (according to the segment) & with silicone-sealed profile (FSB – Full Silicone Border). Thanks to the exclusive patented adjusting system adopted by the Nolangroup, the stretch of the Pinlock® inner visor can be adjusted, acting from the exterior of the visor, without the necessity for dismantling. Note Please note that as long as nothing else is written in the article description, all helmets that have a visor as standard will be delivered with a clear one, even if it is shown differently.


...
Archived Product
kr3534.42
The new comfort flip-up helmet continues the development of its predecessor Nolan N104 Absolutely consistently & impresses with its elegant design, numerous technical features & a huge selection of colors & decors. Its compact

Dimensions (thanks to two different shell sizes), double P/J homologation, an ultra-wide visor, adjustable in different positions sun visor, airbooster technology for optimal ventilation, the patented elliptical opening mechanism & much more make the Nolan N100.5 for reference in the class of flip-up helmet all-rounders. Shell Polycarbonate shell 2 outer shell sizes 6 inner shell sizes Visor Scratch resistant treatement on both sides With adjustable pins Pinlock type FSB (4l) in the box Quick release shield system Vision protection system Scratch resistant & fog resistant treatements on both sides UV 400 protection N-Com compatibility Ready for N-com (B901L R series, B901 R series, B1.4, MSC III R series, ESS) Ready for ESS
- Emergency Stop Signal N-com keypad adapters Ventilation system Airbooster technology Top ventilation Chin guard air intake Rear air exhaust Retention system Microlock² Comfort padding Removable & washable Antibacterial treatment Removable clima comfort top Removable cheek pads Removable neck roll other Features Wind protector Top helmet bag Protective hard coating on the vanish Microlock² (patented) Double lever retention system with micrometric adjustment. This system consists of a thermoplastic ergonomic opening lever, & of a second aluminium toothed & holding lever. The toothed lever releases the micrometric strip, thus the chin strap can only be open with a very broad rotation of the opening lever. This device minimizes the possibility of unintentional opening of the retention system. Pinlock® Fog-Resistant inner visor Supplied (according to the segment) & with silicone-sealed profile (FSB – Full Silicone Border). Thanks to the exclusive patented adjusting system adopted by the Nolangroup, the stretch of the Pinlock® inner visor can be adjusted, acting from the exterior of the visor, without the necessity for dismantling. Note Please be aware, as long as nothing else is written in the item description: All helmets will be delivered only with the ECE certification by default all helmets that have a visor will be delivered with a clear visor, even if it is shown differently.


...
Available
kr3534.42
The new comfort flip-up helmet continues the development of its predecessor Nolan N104 Absolutely consistently & impresses with its elegant design, numerous technical features & a huge selection of colors & decors. Its compact

Dimensions (thanks to two different shell sizes), double P/J homologation, an ultra-wide visor, adjustable in different positions sun visor, airbooster technology for optimal ventilation, the patented elliptical opening mechanism & much more make the Nolan N100.5 for reference in the class of flip-up helmet all-rounders. Shell Polycarbonate shell 2 outer shell sizes 6 inner shell sizes Visor Scratch resistant treatement on both sides With adjustable pins Pinlock type FSB (4l) in the box Quick release shield system Vision protection system Scratch resistant & fog resistant treatements on both sides UV 400 protection N-Com compatibility Ready for N-com (B901L R series, B901 R series, B1.4, MSC III R series, ESS) Ready for ESS
- Emergency Stop Signal N-com keypad adapters Ventilation system Airbooster technology Top ventilation Chin guard air intake Rear air exhaust Retention system Microlock² Comfort padding Removable & washable Antibacterial treatment Removable clima comfort top Removable cheek pads Removable neck roll other Features Wind protector Top helmet bag Protective hard coating on the vanish Microlock² (patented) Double lever retention system with micrometric adjustment. This system consists of a thermoplastic ergonomic opening lever, & of a second aluminium toothed & holding lever. The toothed lever releases the micrometric strip, thus the chin strap can only be open with a very broad rotation of the opening lever. This device minimizes the possibility of unintentional opening of the retention system. Pinlock® Fog-Resistant inner visor Supplied (according to the segment) & with silicone-sealed profile (FSB – Full Silicone Border). Thanks to the exclusive patented adjusting system adopted by the Nolangroup, the stretch of the Pinlock® inner visor can be adjusted, acting from the exterior of the visor, without the necessity for dismantling. Note Please be aware, as long as nothing else is written in the item description: All helmets will be delivered only with the ECE certification by default all helmets that have a visor will be delivered with a clear visor, even if it is shown differently.


...
Available
kr3741.34
The new comfort flip-up helmet continues the development of its predecessor Nolan N104 Absolutely consistently & impresses with its elegant design, numerous technical features & a huge selection of colors & decors. Its compact

Dimensions (thanks to two different shell sizes), double P/J homologation, an ultra-wide visor, adjustable in different positions sun visor, airbooster technology for optimal ventilation, the patented elliptical opening mechanism & much more make the Nolan N100.5 for reference in the class of flip-up helmet all-rounders. Shell Polycarbonate shell 2 outer shell sizes 6 inner shell sizes Visor Scratch resistant treatement on both sides With adjustable pins Pinlock type FSB (4l) in the box Quick release shield system Vision protection system Scratch resistant & fog resistant treatements on both sides UV 400 protection N-Com compatibility Ready for N-com (B901L R series, B901 R series, B1.4, MSC III R series, ESS) Ready for ESS
- Emergency Stop Signal N-com keypad adapters Ventilation system Airbooster technology Top ventilation Chin guard air intake Rear air exhaust Retention system Microlock² Comfort padding Removable & washable Antibacterial treatment Removable clima comfort top Removable cheek pads Removable neck roll other Features Wind protector Top helmet bag Protective hard coating on the vanish Microlock² (patented) Double lever retention system with micrometric adjustment. This system consists of a thermoplastic ergonomic opening lever, & of a second aluminium toothed & holding lever. The toothed lever releases the micrometric strip, thus the chin strap can only be open with a very broad rotation of the opening lever. This device minimizes the possibility of unintentional opening of the retention system. Pinlock® Fog-Resistant inner visor Supplied (according to the segment) & with silicone-sealed profile (FSB – Full Silicone Border). Thanks to the exclusive patented adjusting system adopted by the Nolangroup, the stretch of the Pinlock® inner visor can be adjusted, acting from the exterior of the visor, without the necessity for dismantling. Note Please note that as long as nothing else is written in the article description, all helmets that have a visor as standard will be delivered with a clear one, even if it is shown differently.


...
Archived Product
kr3786.17
This is Nolan’s top-of-the-range flip up helmet. It is characterized by its elegant design, its many technical features & the wide range of colours & graphics available. Its compact size (thanks to the availability of two outer shell sizes), double P/J homologation, an ultrawide visor, VPS sun screen (adjustable in various positions & fitted with the automatic retraction system), Air Booster Technology upper ventilation system, rotation of the chin-guard with elliptical motion, exclusive double-action chin-guard opening mechanism, double lever Microlock² retention system with micrometric adjustment, innovative Clima Comfort inner comfort padding (with micro-perforated fabrics & adjustable neck-roll) & set up for the N-Com communication system are all reasons why the N100-5 is very-much-appreciated by the most demanding of motorbike tourists. This status was also confirmed with the assigning of the title of “best purchase” by the German magazine Touren-Fahrer in 2018. Features Polycarbonate shell P/J-Homologation dual action lift Ultrawide visor Pinlock-ready anti-scratch visor (Pinlock FSB 4L) Pinlock-screen included Quick release visor system Sunscreen with UV-400 protection Airbooster technology Microlock retention system Removable Clima Comfort Interior with antibacterial treatment Removable cheek pads Adjustabe neck-roll Wind protector N-Com ready ESS
- Emergency Stop Signal ready Helmet bag Homologized UN/ECE 22-05 P/J Homologation The helmet can be used either with the chin guard open (J configuration) or closed (P configuration), as the protective chin guard has passed the homologation tests required by UN/ECE regulations for full-face helmets. Ultrawide visor The large surface of the S/R (Scratch Resistant) visor makes it possible to have a broader view, also lateral, thus highly increasing active safety. Pinlock® Fog-Resistant inner visor Thanks to the patented adjusting system, the stretch of the Pinlock® inner visor can be adjusted, acting from the exterior of the visor, without the necessity of removing. The Full Silicone Border (FSB), adopted under licence from Pinlock®, allows first of all for an increase in the size of the air chamber located between the helmet exterior & interior, thus further reducing the risk of fogging, secondly, it reduces the risk of scratches to the visor. Dunkel-getöntes* VPS-Innenvisier mit UV 400-Schutz Das exklusive Innenvisier wird aus LEXANTM* geformt und ist S/R (Scratch Resistant) behandelt, mit einem UV-Schutz bis zu 400 Nanometer. Es lässt sich leicht entfernen, wenn es nicht benötigt wird, oder für normale Wartungs- und Reinigungsarbeiten. Chin guard rotation with elliptical trajectory The chin guard rotation movement with elliptical trajectory makes it possible to keep the total size of the helmet’s front section to a minimum, when the chin guard is open. The “sail” effect is consequently highly reduced & riding comfort is still guaranteed, even when the chin guard is lifted. dual action (patented) Exclusive dual action chin guard opening system. Positioned in the center of the chin guard, it allows for easy, one-handed opening. The dual action opening mechanism reduces the risk of accidental opening: the chin guard can be opened only operating the first release lever (or safety lock) & then activating the second lever. Airbooster technology The exclusive “ Air Booster Technology” upper system ensures optimal ventilation where the rider’s head most requires: the air is extracted from the upper air intake & forced into the most critical areas, avoiding any dispersion, to guarantee maximum comfort also in extreme riding conditions. Moreover, the ventilation system

Features:
a chin guard air intake
- this allows ventilation at mouth level & directs air straight to the visor, limiting fogging a rear extractor
- integrated in a rear spoiler, it allows for the expulsion of hot, stale air Microlock² (patented) Availability according to the product version. It is a patented double lever retention system with micrometric adjustment. It consists of a thermoplastic ergonomic opening lever, & of a second aluminium toothed & holding lever. The toothed lever releases the micrometric strip, thus the chin strap can only be open with a very broad rotation of the opening lever. This device minimizes the possibility of unintentional opening of the retention system. “ Clima Comfort” inner padding The inner comfort padding is designed to offer both the typical lightness of a jet helmet & the close fit of a full-face helmet. The chin straps integrated into the liner (which are therefore removable & washable), favor the helmet’s fit as well as its wearability. Polystyrene lining for the inner cheek pads The helmet has an innovative molded polystyrene lining for the internal cheek pads which allows for a more precise fitting of the cheek pads & provides the product with a quality finish. Single-Piece cheek pads The internal padding in expanded foam for the cheek pads has been designed in order to provide superior even pressure & consistent performance over time compared to traditional padding. It can also be removed from its fabric coverings in order to make washing of the latter easier. Set up for N-COM communication system The helmet is ready & approved with the N-Com communication system installed. The system allowing for the installation & the compatible N-Com product itself, have both been designed with the aim of facilitating the assembly of the system N-COM compatibility B901L R series
- B901 R series
- B601 R series ESS
- MCS III R series SHARP – THE HELMET SAFETY SCHEME Nolangroup proudly underlines that all of its products
- Nolan, X-lite & Grex
- tested by SHARP, the prominent independent test system run by the British Government, have obtained at least four stars. Furthermore, all “flip-up” helmets have received the highest possible rating in terms of chin guard latch reliability. This means that, for each of the products tested by SHARP, the chin guard remains completely closed during each of the 30 impacts. Note Please note that as long as nothing else is written in the article description, all helmets that have a visor as standard will be delivered with a clear one, even if it s shown differently.









...
Archived Product
kr3771.03
This is Nolan’s top-of-the-range flip up helmet. It is characterized by its elegant design, its many technical features & the wide range of colours & graphics available. Its compact size (thanks to the availability of two outer shell sizes), double P/J homologation, an ultrawide visor, VPS sun screen (adjustable in various positions & fitted with the automatic retraction system), Air Booster Technology upper ventilation system, rotation of the chin-guard with elliptical motion, exclusive double-action chin-guard opening mechanism, double lever Microlock² retention system with micrometric adjustment, innovative Clima Comfort inner comfort padding (with micro-perforated fabrics & adjustable neck-roll) & set up for the N-Com communication system are all reasons why the N100-5 is very-much-appreciated by the most demanding of motorbike tourists. This status was also confirmed with the assigning of the title of “best purchase” by the German magazine Touren-Fahrer in 2018. Features Polycarbonate shell P/J-Homologation dual action lift Ultrawide visor Pinlock-ready anti-scratch visor (Pinlock FSB 4L) Pinlock-screen included Quick release visor system Sunscreen with UV-400 protection Airbooster technology Microlock retention system Removable Clima Comfort Interior with antibacterial treatment Removable cheek pads Adjustabe neck-roll Wind protector N-Com ready ESS
- Emergency Stop Signal ready Helmet bag Homologized UN/ECE 22-05 P/J Homologation The helmet can be used either with the chin guard open (J configuration) or closed (P configuration), as the protective chin guard has passed the homologation tests required by UN/ECE regulations for full-face helmets. Ultrawide visor The large surface of the S/R (Scratch Resistant) visor makes it possible to have a broader view, also lateral, thus highly increasing active safety. Pinlock® Fog-Resistant inner visor Thanks to the patented adjusting system, the stretch of the Pinlock® inner visor can be adjusted, acting from the exterior of the visor, without the necessity of removing. The Full Silicone Border (FSB), adopted under licence from Pinlock®, allows first of all for an increase in the size of the air chamber located between the helmet exterior & interior, thus further reducing the risk of fogging, secondly, it reduces the risk of scratches to the visor. Dunkel-getöntes* VPS-Innenvisier mit UV 400-Schutz Das exklusive Innenvisier wird aus LEXANTM* geformt und ist S/R (Scratch Resistant) behandelt, mit einem UV-Schutz bis zu 400 Nanometer. Es lässt sich leicht entfernen, wenn es nicht benötigt wird, oder für normale Wartungs- und Reinigungsarbeiten. Chin guard rotation with elliptical trajectory The chin guard rotation movement with elliptical trajectory makes it possible to keep the total size of the helmet’s front section to a minimum, when the chin guard is open. The “sail” effect is consequently highly reduced & riding comfort is still guaranteed, even when the chin guard is lifted. dual action (patented) Exclusive dual action chin guard opening system. Positioned in the center of the chin guard, it allows for easy, one-handed opening. The dual action opening mechanism reduces the risk of accidental opening: the chin guard can be opened only operating the first release lever (or safety lock) & then activating the second lever. Airbooster technology The exclusive “ Air Booster Technology” upper system ensures optimal ventilation where the rider’s head most requires: the air is extracted from the upper air intake & forced into the most critical areas, avoiding any dispersion, to guarantee maximum comfort also in extreme riding conditions. Moreover, the ventilation system

Features:
a chin guard air intake
- this allows ventilation at mouth level & directs air straight to the visor, limiting fogging a rear extractor
- integrated in a rear spoiler, it allows for the expulsion of hot, stale air Microlock² (patented) Availability according to the product version. It is a patented double lever retention system with micrometric adjustment. It consists of a thermoplastic ergonomic opening lever, & of a second aluminium toothed & holding lever. The toothed lever releases the micrometric strip, thus the chin strap can only be open with a very broad rotation of the opening lever. This device minimizes the possibility of unintentional opening of the retention system. “ Clima Comfort” inner padding The inner comfort padding is designed to offer both the typical lightness of a jet helmet & the close fit of a full-face helmet. The chin straps integrated into the liner (which are therefore removable & washable), favor the helmet’s fit as well as its wearability. Polystyrene lining for the inner cheek pads The helmet has an innovative molded polystyrene lining for the internal cheek pads which allows for a more precise fitting of the cheek pads & provides the product with a quality finish. Single-Piece cheek pads The internal padding in expanded foam for the cheek pads has been designed in order to provide superior even pressure & consistent performance over time compared to traditional padding. It can also be removed from its fabric coverings in order to make washing of the latter easier. Set up for N-COM communication system The helmet is ready & approved with the N-Com communication system installed. The system allowing for the installation & the compatible N-Com product itself, have both been designed with the aim of facilitating the assembly of the system N-COM compatibility B901L R series
- B901 R series
- B601 R series ESS
- MCS III R series SHARP – THE HELMET SAFETY SCHEME Nolangroup proudly underlines that all of its products
- Nolan, X-lite & Grex
- tested by SHARP, the prominent independent test system run by the British Government, have obtained at least four stars. Furthermore, all “flip-up” helmets have received the highest possible rating in terms of chin guard latch reliability. This means that, for each of the products tested by SHARP, the chin guard remains completely closed during each of the 30 impacts. Note Please be aware, as long as nothing else is written in the item description: All helmets will be delivered only with the ECE certification by default all helmets that have a visor will be delivered with a clear visor, even if it is shown differently.









...
Available
kr3771.03
This is Nolan’s top-of-the-range flip up helmet. It is characterized by its elegant design, its many technical features & the wide range of colours & graphics available. Its compact size (thanks to the availability of two outer shell sizes), double P/J homologation, an ultrawide visor, VPS sun screen (adjustable in various positions & fitted with the automatic retraction system), Air Booster Technology upper ventilation system, rotation of the chin-guard with elliptical motion, exclusive double-action chin-guard opening mechanism, double lever Microlock² retention system with micrometric adjustment, innovative Clima Comfort inner comfort padding (with micro-perforated fabrics & adjustable neck-roll) & set up for the N-Com communication system are all reasons why the N100-5 is very-much-appreciated by the most demanding of motorbike tourists. This status was also confirmed with the assigning of the title of “best purchase” by the German magazine Touren-Fahrer in 2018. Features Polycarbonate shell P/J-Homologation dual action lift Ultrawide visor Pinlock-ready anti-scratch visor (Pinlock FSB 4L) Pinlock-screen included Quick release visor system Sunscreen with UV-400 protection Airbooster technology Microlock retention system Removable Clima Comfort Interior with antibacterial treatment Removable cheek pads Adjustabe neck-roll Wind protector N-Com ready ESS
- Emergency Stop Signal ready Helmet bag Homologized UN/ECE 22-05 P/J Homologation The helmet can be used either with the chin guard open (J configuration) or closed (P configuration), as the protective chin guard has passed the homologation tests required by UN/ECE regulations for full-face helmets. Ultrawide visor The large surface of the S/R (Scratch Resistant) visor makes it possible to have a broader view, also lateral, thus highly increasing active safety. Pinlock® Fog-Resistant inner visor Thanks to the patented adjusting system, the stretch of the Pinlock® inner visor can be adjusted, acting from the exterior of the visor, without the necessity of removing. The Full Silicone Border (FSB), adopted under licence from Pinlock®, allows first of all for an increase in the size of the air chamber located between the helmet exterior & interior, thus further reducing the risk of fogging, secondly, it reduces the risk of scratches to the visor. Dunkel-getöntes* VPS-Innenvisier mit UV 400-Schutz Das exklusive Innenvisier wird aus LEXANTM* geformt und ist S/R (Scratch Resistant) behandelt, mit einem UV-Schutz bis zu 400 Nanometer. Es lässt sich leicht entfernen, wenn es nicht benötigt wird, oder für normale Wartungs- und Reinigungsarbeiten. Chin guard rotation with elliptical trajectory The chin guard rotation movement with elliptical trajectory makes it possible to keep the total size of the helmet’s front section to a minimum, when the chin guard is open. The “sail” effect is consequently highly reduced & riding comfort is still guaranteed, even when the chin guard is lifted. dual action (patented) Exclusive dual action chin guard opening system. Positioned in the center of the chin guard, it allows for easy, one-handed opening. The dual action opening mechanism reduces the risk of accidental opening: the chin guard can be opened only operating the first release lever (or safety lock) & then activating the second lever. Airbooster technology The exclusive “ Air Booster Technology” upper system ensures optimal ventilation where the rider’s head most requires: the air is extracted from the upper air intake & forced into the most critical areas, avoiding any dispersion, to guarantee maximum comfort also in extreme riding conditions. Moreover, the ventilation system

Features:
a chin guard air intake
- this allows ventilation at mouth level & directs air straight to the visor, limiting fogging a rear extractor
- integrated in a rear spoiler, it allows for the expulsion of hot, stale air Microlock² (patented) Availability according to the product version. It is a patented double lever retention system with micrometric adjustment. It consists of a thermoplastic ergonomic opening lever, & of a second aluminium toothed & holding lever. The toothed lever releases the micrometric strip, thus the chin strap can only be open with a very broad rotation of the opening lever. This device minimizes the possibility of unintentional opening of the retention system. “ Clima Comfort” inner padding The inner comfort padding is designed to offer both the typical lightness of a jet helmet & the close fit of a full-face helmet. The chin straps integrated into the liner (which are therefore removable & washable), favor the helmet’s fit as well as its wearability. Polystyrene lining for the inner cheek pads The helmet has an innovative molded polystyrene lining for the internal cheek pads which allows for a more precise fitting of the cheek pads & provides the product with a quality finish. Single-Piece cheek pads The internal padding in expanded foam for the cheek pads has been designed in order to provide superior even pressure & consistent performance over time compared to traditional padding. It can also be removed from its fabric coverings in order to make washing of the latter easier. Set up for N-COM communication system The helmet is ready & approved with the N-Com communication system installed. The system allowing for the installation & the compatible N-Com product itself, have both been designed with the aim of facilitating the assembly of the system N-COM compatibility B901L R series
- B901 R series
- B601 R series ESS
- MCS III R series SHARP – THE HELMET SAFETY SCHEME Nolangroup proudly underlines that all of its products
- Nolan, X-lite & Grex
- tested by SHARP, the prominent independent test system run by the British Government, have obtained at least four stars. Furthermore, all “flip-up” helmets have received the highest possible rating in terms of chin guard latch reliability. This means that, for each of the products tested by SHARP, the chin guard remains completely closed during each of the 30 impacts. Note Please be aware, as long as nothing else is written in the item description: All helmets will be delivered only with the ECE certification by default all helmets that have a visor will be delivered with a clear visor, even if it is shown differently.









...
Available
kr3771.03
This is Nolan’s top-of-the-range flip up helmet. It is characterized by its elegant design, its many technical features & the wide range of colours & graphics available. Its compact size (thanks to the availability of two outer shell sizes), double P/J homologation, an ultrawide visor, VPS sun screen (adjustable in various positions & fitted with the automatic retraction system), Air Booster Technology upper ventilation system, rotation of the chin-guard with elliptical motion, exclusive double-action chin-guard opening mechanism, double lever Microlock² retention system with micrometric adjustment, innovative Clima Comfort inner comfort padding (with micro-perforated fabrics & adjustable neck-roll) & set up for the N-Com communication system are all reasons why the N100-5 is very-much-appreciated by the most demanding of motorbike tourists. This status was also confirmed with the assigning of the title of “best purchase” by the German magazine Touren-Fahrer in 2018. Features Polycarbonate shell P/J-Homologation dual action lift Ultrawide visor Pinlock-ready anti-scratch visor (Pinlock FSB 4L) Pinlock-screen included Quick release visor system Sunscreen with UV-400 protection Airbooster technology Microlock retention system Removable Clima Comfort Interior with antibacterial treatment Removable cheek pads Adjustabe neck-roll Wind protector N-Com ready ESS
- Emergency Stop Signal ready Helmet bag Homologized UN/ECE 22-05 P/J Homologation The helmet can be used either with the chin guard open (J configuration) or closed (P configuration), as the protective chin guard has passed the homologation tests required by UN/ECE regulations for full-face helmets. Ultrawide visor The large surface of the S/R (Scratch Resistant) visor makes it possible to have a broader view, also lateral, thus highly increasing active safety. Pinlock® Fog-Resistant inner visor Thanks to the patented adjusting system, the stretch of the Pinlock® inner visor can be adjusted, acting from the exterior of the visor, without the necessity of removing. The Full Silicone Border (FSB), adopted under licence from Pinlock®, allows first of all for an increase in the size of the air chamber located between the helmet exterior & interior, thus further reducing the risk of fogging, secondly, it reduces the risk of scratches to the visor. Dunkel-getöntes* VPS-Innenvisier mit UV 400-Schutz Das exklusive Innenvisier wird aus LEXANTM* geformt und ist S/R (Scratch Resistant) behandelt, mit einem UV-Schutz bis zu 400 Nanometer. Es lässt sich leicht entfernen, wenn es nicht benötigt wird, oder für normale Wartungs- und Reinigungsarbeiten. Chin guard rotation with elliptical trajectory The chin guard rotation movement with elliptical trajectory makes it possible to keep the total size of the helmet’s front section to a minimum, when the chin guard is open. The “sail” effect is consequently highly reduced & riding comfort is still guaranteed, even when the chin guard is lifted. dual action (patented) Exclusive dual action chin guard opening system. Positioned in the center of the chin guard, it allows for easy, one-handed opening. The dual action opening mechanism reduces the risk of accidental opening: the chin guard can be opened only operating the first release lever (or safety lock) & then activating the second lever. Airbooster technology The exclusive “ Air Booster Technology” upper system ensures optimal ventilation where the rider’s head most requires: the air is extracted from the upper air intake & forced into the most critical areas, avoiding any dispersion, to guarantee maximum comfort also in extreme riding conditions. Moreover, the ventilation system

Features:
a chin guard air intake
- this allows ventilation at mouth level & directs air straight to the visor, limiting fogging a rear extractor
- integrated in a rear spoiler, it allows for the expulsion of hot, stale air Microlock² (patented) Availability according to the product version. It is a patented double lever retention system with micrometric adjustment. It consists of a thermoplastic ergonomic opening lever, & of a second aluminium toothed & holding lever. The toothed lever releases the micrometric strip, thus the chin strap can only be open with a very broad rotation of the opening lever. This device minimizes the possibility of unintentional opening of the retention system. “ Clima Comfort” inner padding The inner comfort padding is designed to offer both the typical lightness of a jet helmet & the close fit of a full-face helmet. The chin straps integrated into the liner (which are therefore removable & washable), favor the helmet’s fit as well as its wearability. Polystyrene lining for the inner cheek pads The helmet has an innovative molded polystyrene lining for the internal cheek pads which allows for a more precise fitting of the cheek pads & provides the product with a quality finish. Single-Piece cheek pads The internal padding in expanded foam for the cheek pads has been designed in order to provide superior even pressure & consistent performance over time compared to traditional padding. It can also be removed from its fabric coverings in order to make washing of the latter easier. Set up for N-COM communication system The helmet is ready & approved with the N-Com communication system installed. The system allowing for the installation & the compatible N-Com product itself, have both been designed with the aim of facilitating the assembly of the system N-COM compatibility B901L R series
- B901 R series
- B601 R series ESS
- MCS III R series SHARP – THE HELMET SAFETY SCHEME Nolangroup proudly underlines that all of its products
- Nolan, X-lite & Grex
- tested by SHARP, the prominent independent test system run by the British Government, have obtained at least four stars. Furthermore, all “flip-up” helmets have received the highest possible rating in terms of chin guard latch reliability. This means that, for each of the products tested by SHARP, the chin guard remains completely closed during each of the 30 impacts. Note Please be aware, as long as nothing else is written in the item description: All helmets will be delivered only with the ECE certification by default all helmets that have a visor will be delivered with a clear visor, even if it is shown differently.









...
Available
kr3771.03
This is Nolan’s top-of-the-range flip up helmet. It is characterized by its elegant design, its many technical features & the wide range of colours & graphics available. Its compact size (thanks to the availability of two outer shell sizes), double P/J homologation, an ultrawide visor, VPS sun screen (adjustable in various positions & fitted with the automatic retraction system), Air Booster Technology upper ventilation system, rotation of the chin-guard with elliptical motion, exclusive double-action chin-guard opening mechanism, double lever Microlock² retention system with micrometric adjustment, innovative Clima Comfort inner comfort padding (with micro-perforated fabrics & adjustable neck-roll) & set up for the N-Com communication system are all reasons why the N100-5 is very-much-appreciated by the most demanding of motorbike tourists. This status was also confirmed with the assigning of the title of “best purchase” by the German magazine Touren-Fahrer in 2018. Features Polycarbonate shell P/J-Homologation dual action lift Ultrawide visor Pinlock-ready anti-scratch visor (Pinlock FSB 4L) Pinlock-screen included Quick release visor system Sunscreen with UV-400 protection Airbooster technology Microlock retention system Removable Clima Comfort Interior with antibacterial treatment Removable cheek pads Adjustabe neck-roll Wind protector N-Com ready ESS
- Emergency Stop Signal ready Helmet bag Homologized UN/ECE 22-05 P/J Homologation The helmet can be used either with the chin guard open (J configuration) or closed (P configuration), as the protective chin guard has passed the homologation tests required by UN/ECE regulations for full-face helmets. Ultrawide visor The large surface of the S/R (Scratch Resistant) visor makes it possible to have a broader view, also lateral, thus highly increasing active safety. Pinlock® Fog-Resistant inner visor Thanks to the patented adjusting system, the stretch of the Pinlock® inner visor can be adjusted, acting from the exterior of the visor, without the necessity of removing. The Full Silicone Border (FSB), adopted under licence from Pinlock®, allows first of all for an increase in the size of the air chamber located between the helmet exterior & interior, thus further reducing the risk of fogging, secondly, it reduces the risk of scratches to the visor. Dunkel-getöntes* VPS-Innenvisier mit UV 400-Schutz Das exklusive Innenvisier wird aus LEXANTM* geformt und ist S/R (Scratch Resistant) behandelt, mit einem UV-Schutz bis zu 400 Nanometer. Es lässt sich leicht entfernen, wenn es nicht benötigt wird, oder für normale Wartungs- und Reinigungsarbeiten. Chin guard rotation with elliptical trajectory The chin guard rotation movement with elliptical trajectory makes it possible to keep the total size of the helmet’s front section to a minimum, when the chin guard is open. The “sail” effect is consequently highly reduced & riding comfort is still guaranteed, even when the chin guard is lifted. dual action (patented) Exclusive dual action chin guard opening system. Positioned in the center of the chin guard, it allows for easy, one-handed opening. The dual action opening mechanism reduces the risk of accidental opening: the chin guard can be opened only operating the first release lever (or safety lock) & then activating the second lever. Airbooster technology The exclusive “ Air Booster Technology” upper system ensures optimal ventilation where the rider’s head most requires: the air is extracted from the upper air intake & forced into the most critical areas, avoiding any dispersion, to guarantee maximum comfort also in extreme riding conditions. Moreover, the ventilation system

Features:
a chin guard air intake
- this allows ventilation at mouth level & directs air straight to the visor, limiting fogging a rear extractor
- integrated in a rear spoiler, it allows for the expulsion of hot, stale air Microlock² (patented) Availability according to the product version. It is a patented double lever retention system with micrometric adjustment. It consists of a thermoplastic ergonomic opening lever, & of a second aluminium toothed & holding lever. The toothed lever releases the micrometric strip, thus the chin strap can only be open with a very broad rotation of the opening lever. This device minimizes the possibility of unintentional opening of the retention system. “ Clima Comfort” inner padding The inner comfort padding is designed to offer both the typical lightness of a jet helmet & the close fit of a full-face helmet. The chin straps integrated into the liner (which are therefore removable & washable), favor the helmet’s fit as well as its wearability. Polystyrene lining for the inner cheek pads The helmet has an innovative molded polystyrene lining for the internal cheek pads which allows for a more precise fitting of the cheek pads & provides the product with a quality finish. Single-Piece cheek pads The internal padding in expanded foam for the cheek pads has been designed in order to provide superior even pressure & consistent performance over time compared to traditional padding. It can also be removed from its fabric coverings in order to make washing of the latter easier. Set up for N-COM communication system The helmet is ready & approved with the N-Com communication system installed. The system allowing for the installation & the compatible N-Com product itself, have both been designed with the aim of facilitating the assembly of the system N-COM compatibility B901L R series
- B901 R series
- B601 R series ESS
- MCS III R series SHARP – THE HELMET SAFETY SCHEME Nolangroup proudly underlines that all of its products
- Nolan, X-lite & Grex
- tested by SHARP, the prominent independent test system run by the British Government, have obtained at least four stars. Furthermore, all “flip-up” helmets have received the highest possible rating in terms of chin guard latch reliability. This means that, for each of the products tested by SHARP, the chin guard remains completely closed during each of the 30 impacts. Note Please be aware, as long as nothing else is written in the item description: All helmets will be delivered only with the ECE certification by default all helmets that have a visor will be delivered with a clear visor, even if it is shown differently.









...
Available
kr3771.03
This is Nolan’s top-of-the-range flip up helmet. It is characterized by its elegant design, its many technical features & the wide range of colours & graphics available. Its compact size (thanks to the availability of two outer shell sizes), double P/J homologation, an ultrawide visor, VPS sun screen (adjustable in various positions & fitted with the automatic retraction system), Air Booster Technology upper ventilation system, rotation of the chin-guard with elliptical motion, exclusive double-action chin-guard opening mechanism, double lever Microlock² retention system with micrometric adjustment, innovative Clima Comfort inner comfort padding (with micro-perforated fabrics & adjustable neck-roll) & set up for the N-Com communication system are all reasons why the N100-5 is very-much-appreciated by the most demanding of motorbike tourists. This status was also confirmed with the assigning of the title of “best purchase” by the German magazine Touren-Fahrer in 2018. Features Polycarbonate shell P/J-Homologation dual action lift Ultrawide visor Pinlock-ready anti-scratch visor (Pinlock FSB 4L) Pinlock-screen included Quick release visor system Sunscreen with UV-400 protection Airbooster technology Microlock retention system Removable Clima Comfort Interior with antibacterial treatment Removable cheek pads Adjustabe neck-roll Wind protector N-Com ready ESS
- Emergency Stop Signal ready Helmet bag Homologized UN/ECE 22-05 P/J Homologation The helmet can be used either with the chin guard open (J configuration) or closed (P configuration), as the protective chin guard has passed the homologation tests required by UN/ECE regulations for full-face helmets. Ultrawide visor The large surface of the S/R (Scratch Resistant) visor makes it possible to have a broader view, also lateral, thus highly increasing active safety. Pinlock® Fog-Resistant inner visor Thanks to the patented adjusting system, the stretch of the Pinlock® inner visor can be adjusted, acting from the exterior of the visor, without the necessity of removing. The Full Silicone Border (FSB), adopted under licence from Pinlock®, allows first of all for an increase in the size of the air chamber located between the helmet exterior & interior, thus further reducing the risk of fogging, secondly, it reduces the risk of scratches to the visor. Dunkel-getöntes* VPS-Innenvisier mit UV 400-Schutz Das exklusive Innenvisier wird aus LEXANTM* geformt und ist S/R (Scratch Resistant) behandelt, mit einem UV-Schutz bis zu 400 Nanometer. Es lässt sich leicht entfernen, wenn es nicht benötigt wird, oder für normale Wartungs- und Reinigungsarbeiten. Chin guard rotation with elliptical trajectory The chin guard rotation movement with elliptical trajectory makes it possible to keep the total size of the helmet’s front section to a minimum, when the chin guard is open. The “sail” effect is consequently highly reduced & riding comfort is still guaranteed, even when the chin guard is lifted. dual action (patented) Exclusive dual action chin guard opening system. Positioned in the center of the chin guard, it allows for easy, one-handed opening. The dual action opening mechanism reduces the risk of accidental opening: the chin guard can be opened only operating the first release lever (or safety lock) & then activating the second lever. Airbooster technology The exclusive “ Air Booster Technology” upper system ensures optimal ventilation where the rider’s head most requires: the air is extracted from the upper air intake & forced into the most critical areas, avoiding any dispersion, to guarantee maximum comfort also in extreme riding conditions. Moreover, the ventilation system

Features:
a chin guard air intake
- this allows ventilation at mouth level & directs air straight to the visor, limiting fogging a rear extractor
- integrated in a rear spoiler, it allows for the expulsion of hot, stale air Microlock² (patented) Availability according to the product version. It is a patented double lever retention system with micrometric adjustment. It consists of a thermoplastic ergonomic opening lever, & of a second aluminium toothed & holding lever. The toothed lever releases the micrometric strip, thus the chin strap can only be open with a very broad rotation of the opening lever. This device minimizes the possibility of unintentional opening of the retention system. “ Clima Comfort” inner padding The inner comfort padding is designed to offer both the typical lightness of a jet helmet & the close fit of a full-face helmet. The chin straps integrated into the liner (which are therefore removable & washable), favor the helmet’s fit as well as its wearability. Polystyrene lining for the inner cheek pads The helmet has an innovative molded polystyrene lining for the internal cheek pads which allows for a more precise fitting of the cheek pads & provides the product with a quality finish. Single-Piece cheek pads The internal padding in expanded foam for the cheek pads has been designed in order to provide superior even pressure & consistent performance over time compared to traditional padding. It can also be removed from its fabric coverings in order to make washing of the latter easier. Set up for N-COM communication system The helmet is ready & approved with the N-Com communication system installed. The system allowing for the installation & the compatible N-Com product itself, have both been designed with the aim of facilitating the assembly of the system N-COM compatibility B901L R series
- B901 R series
- B601 R series ESS
- MCS III R series SHARP – THE HELMET SAFETY SCHEME Nolangroup proudly underlines that all of its products
- Nolan, X-lite & Grex
- tested by SHARP, the prominent independent test system run by the British Government, have obtained at least four stars. Furthermore, all “flip-up” helmets have received the highest possible rating in terms of chin guard latch reliability. This means that, for each of the products tested by SHARP, the chin guard remains completely closed during each of the 30 impacts. Note Please be aware, as long as nothing else is written in the item description: All helmets will be delivered only with the ECE certification by default all helmets that have a visor will be delivered with a clear visor, even if it is shown differently.









...
Available

Nolan N100-5 Hilltop N-Com, Flip-up Helmet

This is Nolan’s top-of-the-range flip up helmet. It is characterized by its elegant design, its many technical features and the wide range of colours and graphics available. Its compact size (thanks to the availability of two outer shell sizes), double P/J homologation, an ultrawide visor, VPS sun screen (adjustable in various positions and fitted with the automatic retraction system), AirBooster Technology upper ventilation system, rotation of the chin-guard with elliptical motion, exclusive double-action chin-guard opening mechanism, double lever Microlock² retention system with micrometric adjustment, innovative Clima Comfort inner comfort padding (with micro-perforated fabrics and adjustable neck-roll) and set up for the N-Com communication system are all reasons why the
N100-5 is very-much-appreciated by the most demanding of motorbike tourists. This status was also confirmed with the assigning of the title of “best purchase” by the German magazine Touren-Fahrer in 2018. Features Polycarbonate shell P/J-Homologation Dual Action lift Ultrawide visor Pinlock-ready anti-scratch visor (Pinlock FSB 4L) Pinlock-screen included Quick release visor system Sunscreen with UV-400 protection Airbooster technology Microlock retention system Removable Clima Comfort Interior with antibacterial treatment Removable cheek pads Adjustabe neck-roll Wind protector N-Com ready ESS - Emergency Stop Signal ready Helmet bag Homologized UN/ECE 22-05 P/J Homologation The helmet can be used either with the chin guard open (J configuration) or closed (P configuration), as the
protective chin guard has passed the homologation tests required by UN/ECE regulations for full-face helmets. Ultrawide visor The large surface of the S/R (Scratch Resistant) visor makes it possible to have a broader view, also lateral, thus highly increasing active safety. Pinlock® Fog-Resistant inner visor Thanks to the patented adjusting system, the stretch of the Pinlock® inner visor can be adjusted, acting from the exterior of the visor, without the necessity of removing. The Full Silicone Border (FSB), adopted under licence from Pinlock®, allows first of all for an increase in the size of the air chamber located between the helmet exterior and interior, thus further reducing the risk of fogging, secondly, it reduces the risk of scratches to the visor. Dunkel-getöntes*
VPS-Innenvisier mit UV 400-Schutz Das exklusive Innenvisier wird aus LEXANTM* geformt und ist S/R (Scratch Resistant) behandelt, mit einem UV-Schutz bis zu 400 Nanometer. Es lässt sich leicht entfernen, wenn es nicht benötigt wird, oder für normale Wartungs- und Reinigungsarbeiten. Chin guard rotation with elliptical trajectory The chin guard rotation movement with elliptical trajectory makes it possible to keep the total size of the helmet’s front section to a minimum, when the chin guard is open. The “sail” effect is consequently highly reduced and riding comfort is still guaranteed, even when the chin guard is lifted. Dual Action (patented) Exclusive DUAL ACTION chin guard opening system. Positioned in the center of the chin guard, it allows for easy, one-handed opening.
The dual action opening mechanism reduces the risk of accidental opening: the chin guard can be opened only operating the first release lever (or safety lock) and then activating the second lever. Airbooster technology The exclusive “AirBooster Technology” upper system ensures optimal ventilation where the rider’s head most requires: the air is extracted from the upper air intake and forced into the most critical areas, avoiding any dispersion, to guarantee maximum comfort also in extreme riding conditions. Moreover, the ventilation system features: a chin guard air intake - this allows ventilation at mouth level and directs air straight to the visor, limiting fogging a rear extractor - integrated in a rear spoiler, it allows for the expulsion of hot, stale air Microlock²
(patented) Availability according to the product version. It is a patented double lever retention system with micrometric adjustment. It consists of a thermoplastic ergonomic opening lever, and of a second aluminium toothed and holding lever. The toothed lever releases the micrometric strip, thus the chin strap can only be open with a very broad rotation of the opening lever. This device minimizes the possibility of unintentional opening of the retention system. “Clima Comfort” inner padding The inner comfort padding is designed to offer both the typical lightness of a jet helmet and the close fit of a full-face helmet. The chin straps integrated into the liner (which are therefore removable and washable), favor the helmet’s fit as well as its wearability. Polystyrene lining for
the inner cheek pads The helmet has an innovative molded polystyrene lining for the internal cheek pads which allows for a more precise fitting of the cheek pads and provides the product with a quality finish. Single-Piece cheek pads The internal padding in expanded foam for the cheek pads has been designed in order to provide superior even pressure and consistent performance over time compared to traditional padding. It can also be removed from its fabric coverings in order to make washing of the latter easier. Set up for N-COM communication system The helmet is ready and approved with the N-Com communication system installed. The system allowing for the installation and the compatible N-Com product itself, have both been designed with the aim of facilitating the assembly of the system
N-COM compatibility B901L R series - B901 R series - B601 R series ESS - MCS III R series SHARP – THE HELMET SAFETY SCHEME Nolangroup proudly underlines that all of its products - Nolan, X-lite and Grex - tested by SHARP, the prominent independent test system run by the British Government, have obtained at least four stars. Furthermore, all “flip-up” helmets have received the highest possible rating in terms of chin guard latch reliability. This means that, for each of the products tested by SHARP, the chin guard remains completely closed during each of the 30 impacts. Note Please be aware, as long as nothing else is written in the item description: All helmets will be delivered only with the ECE certification by default all helmets that have a visor will be delivered with a
clear visor, even if it is shown differently.
  • Availability: In Stock
  • Supplier: Motoin SE
  • SKU: se-11066108-009
Availability: In Stock
kr3771.03

Product Description

This is Nolan’s top-of-the-range flip up helmet. It is characterized by its elegant design, its many technical features & the wide range of colours & graphics available. Its compact size (thanks to the availability of two outer shell sizes), double P/J homologation, an ultrawide visor, VPS sun screen (adjustable in various positions & fitted with the automatic retraction system), Air Booster Technology upper ventilation system, rotation of the chin-guard with elliptical motion, exclusive double-action chin-guard opening mechanism, double lever Microlock² retention system with micrometric adjustment, innovative Clima Comfort inner comfort padding (with micro-perforated fabrics & adjustable neck-roll) & set up for the N-Com communication system are all reasons why the N100-5 is very-much-appreciated by the most demanding of motorbike tourists. This status was also confirmed with the assigning of the title of “best purchase” by the German magazine Touren-Fahrer in 2018. Features Polycarbonate shell P/J-Homologation dual action lift Ultrawide visor Pinlock-ready anti-scratch visor (Pinlock FSB 4L) Pinlock-screen included Quick release visor system Sunscreen with UV-400 protection Airbooster technology Microlock retention system Removable Clima Comfort Interior with antibacterial treatment Removable cheek pads Adjustabe neck-roll Wind protector N-Com ready ESS
- Emergency Stop Signal ready Helmet bag Homologized UN/ECE 22-05 P/J Homologation The helmet can be used either with the chin guard open (J configuration) or closed (P configuration), as the protective chin guard has passed the homologation tests required by UN/ECE regulations for full-face helmets. Ultrawide visor The large surface of the S/R (Scratch Resistant) visor makes it possible to have a broader view, also lateral, thus highly increasing active safety. Pinlock® Fog-Resistant inner visor Thanks to the patented adjusting system, the stretch of the Pinlock® inner visor can be adjusted, acting from the exterior of the visor, without the necessity of removing. The Full Silicone Border (FSB), adopted under licence from Pinlock®, allows first of all for an increase in the size of the air chamber located between the helmet exterior & interior, thus further reducing the risk of fogging, secondly, it reduces the risk of scratches to the visor. Dunkel-getöntes* VPS-Innenvisier mit UV 400-Schutz Das exklusive Innenvisier wird aus LEXANTM* geformt und ist S/R (Scratch Resistant) behandelt, mit einem UV-Schutz bis zu 400 Nanometer. Es lässt sich leicht entfernen, wenn es nicht benötigt wird, oder für normale Wartungs- und Reinigungsarbeiten. Chin guard rotation with elliptical trajectory The chin guard rotation movement with elliptical trajectory makes it possible to keep the total size of the helmet’s front section to a minimum, when the chin guard is open. The “sail” effect is consequently highly reduced & riding comfort is still guaranteed, even when the chin guard is lifted. dual action (patented) Exclusive dual action chin guard opening system. Positioned in the center of the chin guard, it allows for easy, one-handed opening. The dual action opening mechanism reduces the risk of accidental opening: the chin guard can be opened only operating the first release lever (or safety lock) & then activating the second lever. Airbooster technology The exclusive “ Air Booster Technology” upper system ensures optimal ventilation where the rider’s head most requires: the air is extracted from the upper air intake & forced into the most critical areas, avoiding any dispersion, to guarantee maximum comfort also in extreme riding conditions. Moreover, the ventilation system

Features:
a chin guard air intake
- this allows ventilation at mouth level & directs air straight to the visor, limiting fogging a rear extractor
- integrated in a rear spoiler, it allows for the expulsion of hot, stale air Microlock² (patented) Availability according to the product version. It is a patented double lever retention system with micrometric adjustment. It consists of a thermoplastic ergonomic opening lever, & of a second aluminium toothed & holding lever. The toothed lever releases the micrometric strip, thus the chin strap can only be open with a very broad rotation of the opening lever. This device minimizes the possibility of unintentional opening of the retention system. “ Clima Comfort” inner padding The inner comfort padding is designed to offer both the typical lightness of a jet helmet & the close fit of a full-face helmet. The chin straps integrated into the liner (which are therefore removable & washable), favor the helmet’s fit as well as its wearability. Polystyrene lining for the inner cheek pads The helmet has an innovative molded polystyrene lining for the internal cheek pads which allows for a more precise fitting of the cheek pads & provides the product with a quality finish. Single-Piece cheek pads The internal padding in expanded foam for the cheek pads has been designed in order to provide superior even pressure & consistent performance over time compared to traditional padding. It can also be removed from its fabric coverings in order to make washing of the latter easier. Set up for N-COM communication system The helmet is ready & approved with the N-Com communication system installed. The system allowing for the installation & the compatible N-Com product itself, have both been designed with the aim of facilitating the assembly of the system N-COM compatibility B901L R series
- B901 R series
- B601 R series ESS
- MCS III R series SHARP – THE HELMET SAFETY SCHEME Nolangroup proudly underlines that all of its products
- Nolan, X-lite & Grex
- tested by SHARP, the prominent independent test system run by the British Government, have obtained at least four stars. Furthermore, all “flip-up” helmets have received the highest possible rating in terms of chin guard latch reliability. This means that, for each of the products tested by SHARP, the chin guard remains completely closed during each of the 30 impacts. Note Please be aware, as long as nothing else is written in the item description: All helmets will be delivered only with the ECE certification by default all helmets that have a visor will be delivered with a clear visor, even if it is shown differently.

Reviews/Comments

Add New

Intelligent Comparison

Oooops!
We couldn't find anything!
Perhaps this product's unique.... Or perhaps we are still looking for comparisons!
Click to bump this page and we'll hurry up.

Price History

Vouchers

No voucher codes found.
Do you know a voucher code for this product or supplier? Add it to Insights for others to use.

Facebook

Jargon Buster

Aluminium - Corrosion resistant lightweight metal
Ergonomic - A specific design to fit the purpose of the user
Foam - A stubstance formed by trapping air in a solid or liquid
Helmet - A form of protection worn on the head to prevent injury
UV - Ultraviolet - a specific wavelength of light invisible to the human eye
sun - A star at the centre of the solar system.
neck - A part of the body distinguishing the head from the torso.
hot - An indication of the temperature being high and a sensation of heat to the tough
compact - Carefuly designed to ensure an item has a minimal physical size
Graphics - A general term for visual aspects of an item/display
Silicone - An inert synthetic rubber like compound
rotation - A circular motion of an object around a central axis
Quality - An object that has quality is superior in function and finish than a less quality object.
Set - a group of items usually related to one another. Some objects cannot function without the complete set of items.
Size - is the measurement of how big an object is in space.
Safety - prevents damage being caused.
Quick - Something that is fast
Comfort - something that feels nice to the user. Often relaxing.
Large - something that takes up more space than normal.
Compact - something that has a lot combined within a small space.
Shell - A hard external structure or surface.
Patented - Something that has legal rights not to be copied, unique.
Traditional - Something that has become the same through a period of time and thus repeated.
Resistant - Something that can repel against something.
Precise - A measurement on the accuracy of something
Adjustable - Something that can be changed or slightly modified to fit.
Polycarbonate - A man made chemical where polymers are linked to carbonates
Treatment - A way in which medics care for patients illnesses. A manner which someone behaves to someone else.
Traditional - Something that has been around for a while and is repeated regularly.
Wide - Something with a large width.
Ventilation - Giving fresh air to a room on someone's lungs.
Exclusive - Something that is not including other things.
Assembly - A gathering of people for a purpose e.g. a school assembly
Innovative - An idea that shows new method and ways of thinking, an original design.
technical - Something that relates to a good level of skill and methods.
Design - A drawing or styles that shows the look and functionality of something before its made.
Adjustable - Something that can be changed in order to fit better.
Exterior - The outer of something usually what is visible.
Interior - The inside of something, usually what is not visible.
Performance - When someone is presenting a form of entertainment, also how well someone is doing within a role.
Assembly - A gathering of people all together for the same purpose.
Head - The upper part of a body typically separated by the neck.

Supplier Information

Motoin SE
Page Updated: 2025-02-05 20:08:21

Community Generated Product Tags

Oh No! The productWIKI community hasn't generated any tags for this product yet!
Menu