Stretch material, very comfortable Waterproof & breathable with membrane Thick lining on backhand Lining on palm Foam reinforcement on palm side Long cuff Supple knuckle protector on backhand Elasticated wrist with velcro fastener ...

Features Long cuff with tightening strap Elasticated wrist with tightening strap Flex on fingers & backhand Index compatible with touch screens Inner lining in soft micropolar on palm side, velvety polar on back of hand Safety Certified Knuckle protector on backhand Foam reinforcement on bottom palm Reinforced sidewall Material Polyester Softshell ...

Features Long leather cuff Elastic cuff with tension strap Padded reinforcements on fingers, palm & backhand Material Micropolar & soft fleece inner lining Waterproof & breathable with integrated membrane heat padding with Primaloft & Thinsulate Safety Model Hard ankle protection on the backhand Leather covered Reinforced palm & sidewall ...

Features:

Material: Textile fabric & goat-leather Waterproof & breathable insert Thinsulate lining


...

Eigenschaften: VX Long cuff Leveling on wristsby Elastic Material Pre-curved fingers 3D Winter forage on the back & on the palm ...

Features Waterproof & breathable insert Thinsulate lining on palm side Thick lining on backhand Flex over fingers & backhand 3D precurved fingers Elastic at wrist with tightening strap Long cuff with tightening & fantasy fur internal cuff ...

A design tailored for the most beautiful of adventures. Spearheading the new generation of Ixon Adventure products, the Ragnar set leaves nothing to chance in terms of both safety & technology. With a muscular design & reinforced Adventure character, this 3-in-1, ultra-efficient set offers you the choice of riding either hyper-ventilated or totally protected against the most extreme conditions. Waterproof & breathable, Ragnar is equipped with an X-Dry 26/20 insert (developed by Ixon) which largely measures up to some of the most popular membranes on the market. Discover the most radical of Ixon Adventure products! Features Classic collar with neoprene high neckroll & chin pad Adjustable tightening at collar Stretch inside sleeves, on back of armholes & on sides Pockets for protectors in 3D mesh for a better airflow (associated with ventilated Ix Proflex protectors) Semi-autolock zippers (anti-flap) Loops at chest Stretch adjustement at cuffs + forearms + biceps + hips Adjustable stretch tightenings on sides Lycra thumb sleeve on the thermal lining 2 patched pockets including 1 waterproof 2 chest pockets, including one waterproof, padded & shockproof 1 large pocket on back to store the insert Connection to trousers: full zip around waist Climate Control Convertible 3 in 1 jacket 6 oversized zipped ventilations + central 3D mesh retractable stripe on front fastening Removable waterproof & breathable X-dry insert (26000 Schmerber / 20000 MVTR) Removable thermal lining (160 gr. front, 120 gr. on the outside sleeve, 80 gr. on back & inside sleeves) Safety AA certified Model Certified protectors at elbows & shoulders Level 1 Pocket for back protector Reflective on back Ripstop material (resistant to tearing & ripping) Ixon X-DRY Xdry is a high-performance laminated membrane construction developed by Ixon, it contains microscopic pores, invisible to the naked eye, which are too small to let water in but big enough let moisture vapor evacuate. It is durably waterproof, very breathable, & available in 3 layers or 2 layers. As an indication, rain rarely exceeds 2000 Schmerber & it is considered that on a motorbike riding in the rain at 130 km/h (80mph), the water pressure can reach about 8000 Schmerber. ...

A design tailored for the most beautiful of adventures. Spearheading the new generation of Ixon Adventure products, the Ragnar set leaves nothing to chance in terms of both safety & technology. With a muscular design & reinforced Adventure character, this 3-in-1, ultra-efficient set offers you the choice of riding either hyper-ventilated or totally protected against the most extreme conditions. Waterproof & breathable, Ragnar is equipped with an X-Dry 26/20 insert (developed by Ixon) which largely measures up to some of the most popular membranes on the market. Discover the most radical of Ixon Adventure products! Features Classic collar with neoprene high neckroll & chin pad Adjustable tightening at collar Stretch inside sleeves, on back of armholes & on sides Pockets for protectors in 3D mesh for a better airflow (associated with ventilated Ix Proflex protectors) Semi-autolock zippers (anti-flap) Loops at chest Stretch adjustement at cuffs + forearms + biceps + hips Adjustable stretch tightenings on sides Lycra thumb sleeve on the thermal lining 2 patched pockets including 1 waterproof 2 chest pockets, including one waterproof, padded & shockproof 1 large pocket on back to store the insert Connection to trousers: full zip around waist Climate Control Convertible 3 in 1 jacket 6 oversized zipped ventilations + central 3D mesh retractable stripe on front fastening Removable waterproof & breathable X-dry insert (26000 Schmerber / 20000 MVTR) Removable thermal lining (160 gr. front, 120 gr. on the outside sleeve, 80 gr. on back & inside sleeves) Safety AA certified Model Certified protectors at elbows & shoulders Level 1 Pocket for back protector Reflective on back Ripstop material (resistant to tearing & ripping) Ixon X-DRY Xdry is a high-performance laminated membrane construction developed by Ixon, it contains microscopic pores, invisible to the naked eye, which are too small to let water in but big enough let moisture vapor evacuate. It is durably waterproof, very breathable, & available in 3 layers or 2 layers. As an indication, rain rarely exceeds 2000 Schmerber & it is considered that on a motorbike riding in the rain at 130 km/h (80mph), the water pressure can reach about 8000 Schmerber. ...

A design tailored for the most beautiful of adventures. Spearheading the new generation of Ixon Adventure products, the Ragnar set leaves nothing to chance in terms of both safety & technology. With a muscular design & reinforced Adventure character, this 3-in-1, ultra-efficient set offers you the choice of riding either hyper-ventilated or totally protected against the most extreme conditions. Waterproof & breathable, Ragnar is equipped with an X-Dry 26/20 insert (developed by Ixon) which largely measures up to some of the most popular membranes on the market. Discover the most radical of Ixon Adventure products! Features Stretch Material at crotch & on sides from knee to ankle Pockets for protectors in 3D mesh for a better airflow (especially associated with Ix-Proflex protectors) Stretch adjustments at waist & above knees Tightening straps on bottom leg Saddle area reinforcement Flex panel on back of waist for ease 2 patched pockets including 1 waterproof Removable & adjustable straps Connecting to trousers: full zip around waist Climate Control Convertible 3 in 1 trousers Oversized zipped ventilations on thighs Removable waterproof & breathable Xdry insert (26000 Schmerber / 20000 MVTR) Removable thermal lining 120 gr. front, 80 gr. back) Safety AA certified Model Certified knee protectors Level 1 Certified hip protectors Level 2 Reflective on bottom leg Ripstop material (resistant to tearing & ripping) Ixon X-DRY Xdry is a high-performance laminated membrane construction developed by Ixon, it contains microscopic pores, invisible to the naked eye, which are too small to let water in but big enough let moisture vapor evacuate. It is durably waterproof, very breathable, & available in 3 layers or 2 layers. As an indication, rain rarely exceeds 2000 Schmerber & it is considered that on a motorbike riding in the rain at 130 km/h (80mph), the water pressure can reach about 8000 Schmerber. ...

A design tailored for the most beautiful of adventures. Spearheading the new generation of Ixon Adventure products, the Ragnar set leaves nothing to chance in terms of both safety & technology. With a muscular design & reinforced Adventure character, this 3-in-1, ultra-efficient set offers you the choice of riding either hyper-ventilated or totally protected against the most extreme conditions. Waterproof & breathable, Ragnar is equipped with an X-Dry 26/20 insert (developed by Ixon) which largely measures up to some of the most popular membranes on the market. Discover the most radical of Ixon Adventure products! Features Stretch Material at crotch & on sides from knee to ankle Pockets for protectors in 3D mesh for a better airflow (especially associated with Ix-Proflex protectors) Stretch adjustments at waist & above knees Tightening straps on bottom leg Saddle area reinforcement Flex panel on back of waist for ease 2 patched pockets including 1 waterproof Removable & adjustable straps Connecting to trousers: full zip around waist Climate Control Convertible 3 in 1 trousers Oversized zipped ventilations on thighs Removable waterproof & breathable Xdry insert (26000 Schmerber / 20000 MVTR) Removable thermal lining 120 gr. front, 80 gr. back) Safety AA certified Model Certified knee protectors Level 1 Certified hip protectors Level 2 Reflective on bottom leg Ripstop material (resistant to tearing & ripping) Ixon X-DRY Xdry is a high-performance laminated membrane construction developed by Ixon, it contains microscopic pores, invisible to the naked eye, which are too small to let water in but big enough let moisture vapor evacuate. It is durably waterproof, very breathable, & available in 3 layers or 2 layers. As an indication, rain rarely exceeds 2000 Schmerber & it is considered that on a motorbike riding in the rain at 130 km/h (80mph), the water pressure can reach about 8000 Schmerber. ...