The chain tool KTW 2.5 is the reinforced further development of the KTW 2.0. It allows easy removal of the old & the precise installation of the new chain (with rivet lock) without having to laboriously remove the rear swing arm. The tool can be used to separate chains of all common brands (eg D.I.D, Regina, RK & others) & riveted with hollow rivet locks. The tool

Includes:: two mandrels with different diameters. The pre-assembled mandrel is now even stronger dimensioned & adapted to 5xx & 6xx chains. The enclosed mandrel is specially designed for cutting 4xx chains. Only a 19 mm ring or socket wrench is still required for use. The tool is also suitable for solid rivet locks when used with the supplementary rivet former set. The chain tool consists of the power-transmitting main tool & a patented positioning unit for the assembly of the rivet lock, which is characterized by a completely new & simple push-on option for the side plate of the chain lock. This newly developed, magnetic positioning unit ensures simple & at the same time absolutely precise assembly of the side plate of the chain lock. The magnets present in both the pressure plate & the counter plate hold the two parts of the chain lock &, by guiding them, enable precise, simple & convenient alignment of the chain lock parts in relation to each other. This is crucial for damage-free assembly of the chain lock & can be checked at any time through the recesses in the pressure plate. The magnets also ensure that the positioning unit adheres to the chain & does not have to be held constantly. With the main tool, the positioning unit can be used to slide the side plate onto the chain lock, a step that can be very time-consuming & very nerve-racking without the new positioning unit. The pressure & counter plates are designed to extend over the adjacent chain links, so that when the chain lock is mounted, the naked eye can tell when the link plate has been slid onto the two pins to a suitable distance. This largely eliminates the otherwise frequent damage to the chain or chain lock caused by assembly errors. Applications Separating chain Assemble chain lock Riveting chain lock pins Optional rivet head former supplementary set for solid rivet locks By using this supplementary set, the chain tool is able to process full rivet locks. The handling is simple: Replace the mandrel guide with the enclosed rivet former guide. Push the rivet former into the guide & the tool is ready for use. Power is transmitted to the rivet former via the mandrel.

...

Spare parts kit for Kellermann KTW 2.5 chain tool. Content Mandrel 4xx Mandrel 5xx & 6xx ...

Replacement positioning unit for Kellermann chain tools. Suitable for Kellermann KTW 2.0 Kellermann KTW 2.5 ...

Replacement pressure adapter for Kellermann KTW 2.0 & KTM 2.5 chain tools. ...

Rivet head former supplementary set for solid rivet locks. Suitable for Kellermann KTW 2.0 Kellermann KTW 2.5 ...

Replacement lamp holder for Kellermann micro 1000® evo turn signals. ...

Kellermann micro 1000® evo replacement lens (from 2004). ...

The micro 1000® Extreme is one of the brightest Kellermann turn signals of all time & very versatile. It is the first Kellermann turn signal not only approved for motorcycles, but also for all other vehicles such as quads, cars & trailers (approved according to ECE-R6). On motorcycles, the micro 1000® Extreme may therefore come within twenty millimeters of the headlight. The use of two high-power LEDs & the proven Kellermann High Power LED technology** produces an impressively & hitherto unrivalled bright flashing signal. It is detected more quickly & thus ensures maximum safety in road traffic*. * Electronic accessories may be required to regulate the flashing frequency. ** Combination of IC controlled Longlife Protection Guard® circuit with high-power LEDs of the latest design ECE-approved for front & rear Can be used on all vehicles (e.g. motorcycle, quad, passenger car, Super Seven, trailer, etc.) Extreme light output Kellermann High Power LED technology Longlife Protection Guard®, IC controlled, 330 k Hz clocked High quality metal housing Suitable for 12 Volt DC vehicle electrical systems With M8 x 20 mounting thread Replaceable silent rubber adapter, which protects the turn signal from damage caused by vibration & vandalism Features Functional

Features: Turn signal Attachment: Attachment article Mounting thread: M8 x 20 mm

Width: 18 mm ECE approval: all motor vehicles DC wiring systems: 12 V

Height: 17 mm Length (without thread/fixing): 72 mm Product listing

Features: Turn signal Technology: LED lens
Colour: clear Delivery: single








...

The micro 1000® Extreme is one of the brightest Kellermann turn signals of all time & very versatile. It is the first Kellermann turn signal not only approved for motorcycles, but also for all other vehicles such as quads, cars & trailers (approved according to ECE-R6). On motorcycles, the micro 1000® Extreme may therefore come within twenty millimeters of the headlight. The use of two high-power LEDs & the proven Kellermann High Power LED technology** produces an impressively & hitherto unrivalled bright flashing signal. It is detected more quickly & thus ensures maximum safety in road traffic*. * Electronic accessories may be required to regulate the flashing frequency. ** Combination of IC controlled Longlife Protection Guard® circuit with high-power LEDs of the latest design ECE-approved for front & rear Can be used on all vehicles (e.g. motorcycle, quad, passenger car, Super Seven, trailer, etc.) Extreme light output Kellermann High Power LED technology Longlife Protection Guard®, IC controlled, 330 k Hz clocked High quality metal housing Suitable for 12 Volt DC vehicle electrical systems With M8 x 20 mounting thread Replaceable silent rubber adapter, which protects the turn signal from damage caused by vibration & vandalism Features Functional

Features: Turn signal Attachment: Attachment article Mounting thread: M8 x 20 mm

Width: 18 mm ECE approval: all motor vehicles DC wiring systems: 12 V

Height: 17 mm Length (without thread/fixing): 72 mm Product listing

Features: Turn signal Technology: LED lens
Colour: clear Delivery: single








...

This classic rear turn signal combines proven halogen technology with noble, timeless design. Its compact design & its high-quality metal housing convince with low weight. It is the ideal companion to the handlebar end turn signals from the BL 1000 series. Suitable for all motorcycle types. * Electronic accessories may be required to regulate the flashing frequency. ECE approved for rear 6 watt halogen bulb High quality metal housing Suitable for 12 Volt DC wiring systems With M8x 20 mounting thread Replaceable silent rubber adapter, which protects the turn signal from damage due to vibration & vandalism Features Functional

Features: Turn signal Attachment: Attachment article Mounting thread: M8 x 20 mm

Width: 18 mm ECE approval: Motorcycles DC wiring systems: 12 V

Height: 17 mm Length (without thread/fixing): 72 mm Product Listing

Features: Turn signal Technology: halogen Lens
Colour: yellow Delivery: single








...