More From Contributor

kr1139.45
Helmet Technology Shell Design: A sleek European influenced shell design constructed using an advanced lightweight composite poly-alloy Face Shield: A flush-fit, lock down, side-coverless face shield that is optically correct, compound-curved, scratch-resistant & protects against UV-rays Quick Release Ratchet: Quick release shield ratchet system Ventilation: 8 points of ventilation with chin, side, forehead, top & rear vent. 3 intake vents & 5 exhaust vents This helmet model meets or exceeds both ECE 22.05 & DOT FMVSS-218 motorcycle helmet safety standards Retention system is a race approved Double D-RING Provides ample ear cavity space for most speaker systems A clear coat finish to protect paint & graphics A large-size FX-24 weighs 1.53kg or 3.3 lbs Removable, washable & custom sizable Interior AFX helmet liners & cheek pads are made with a hypoallergenic andanti-microbial nylon, most of which are removable &

Washable.

The size of this helmet is based on a combination of four factors: outer shell size, inner EPS thickness, comfort liner thickness & cheek pad thickness. The fit of the helmet can be customized by replacing your existing cheek pads with thinner cheek pads (for a looser fit) or thicker cheek pads (for a tighter fit). The fit can also be customized by replacing your existing comfort liner with a thinner comfort liner (for a looser fit) or thicker comfort liner (for a tighter fit). Please refer to the shell, liner & cheek pad compatibility chart below. Keep in mind these components can only be replaced inside the group of sizes contained in each size range block. Helmet Shell & EPS Size XS-M L-XXL XS S M L XL XXL Check Pad Thickness (mm) 30 27 24 24 21 18 Comfort Liner Thickness (mm) 9 6 4 12 9 6 Note Please note that as long as nothing else is written in the article description, all helmets that have a visor as standard will be delivered with a clear one, even if it is shown differently.



...
Archived Product
kr1013.36
Helmet Technology Shell Design: A sleek European influenced shell design constructed using an advanced lightweight composite poly-alloy Face Shield: A flush-fit, lock down, side-coverless face shield that is optically correct, compound-curved, scratch-resistant & protects against UV-rays Quick Release Ratchet: Quick release shield ratchet system Ventilation: 8 points of ventilation with chin, side, forehead, top & rear vent. 3 intake vents & 5 exhaust vents This helmet model meets or exceeds both ECE 22.05 & DOT FMVSS-218 motorcycle helmet safety standards Retention system is a race approved Double D-RING Provides ample ear cavity space for most speaker systems A clear coat finish to protect paint & graphics A large-size FX-24 weighs 1.53kg or 3.3 lbs Removable, washable & custom sizable Interior AFX helmet liners & cheek pads are made with a hypoallergenic andanti-microbial nylon, most of which are removable &

Washable.

The size of this helmet is based on a combination of four factors: outer shell size, inner EPS thickness, comfort liner thickness & cheek pad thickness. The fit of the helmet can be customized by replacing your existing cheek pads with thinner cheek pads (for a looser fit) or thicker cheek pads (for a tighter fit). The fit can also be customized by replacing your existing comfort liner with a thinner comfort liner (for a looser fit) or thicker comfort liner (for a tighter fit). Please refer to the shell, liner & cheek pad compatibility chart below. Keep in mind these components can only be replaced inside the group of sizes contained in each size range block. Helmet Shell & EPS Size XS-M L-XXL XS S M L XL XXL Check Pad Thickness (mm) 30 27 24 24 21 18 Comfort Liner Thickness (mm) 9 6 4 12 9 6 Note Please be aware, as long as nothing else is written in the item description: All helmets will be delivered only with the ECE certification by default all helmets that have a visor will be delivered with a clear visor, even if it is shown differently.



...
Available
kr724.37
Helmet Technology Shell Design: A sleek European influenced shell design constructed using an advanced lightweight composite poly-alloy. This helmet is specifically designed to fit youth & small adults Face Shield: A flip-up, flush fit, quick release, single turn screw face shield. The shield itself is optically correct compound curved, scratch-resistant & protects against UV-rays This helmet model meets or exceeds both ECE 22.05 & DOT FMVSS-218 motorcycle helmet safety standards A helmet liner made with a hypo-allergenic & anti-microbial moisture wicking nylon, all of which are washable Retention system is Microlock (quick release) Features a metal ring for secure lock ability A clear coat finish to protect paint & graphics A large-size FX-33Y weighs 0.85kg or 1.80 lbs Note Please note that as long as nothing else is written in the article description, all helmets that have a visor as standard will be delivered with a clear one, even if it is shown differently. ...
Archived Product
kr1701.62
Helmet Technology Shell Design: A sleek European influenced shell design constructed using an advanced lightweight composite poly-alloy Face Shield: A flush-fit, lock down, side-coverless face shield that is optically correct, compound-curved, scratch-resistant & protects against UV-rays 1/4 turn fast change Shield Ventilation: 5 points of aerodynamically designed flush fit ventilation with chin, top, rear, & unique side extraction vents. 2 intake vents & 3 exhaust vents Chin Bar: Cam pivot, chin bar linkage system with metal latches for ease of movement & secruity Inner sun Shield: Flip down inner smoke shield with easy to use side actuation lever This helmet model meets or exceeds both ECE 22.05 & DOT FMVSS-218 motorcycle helmet safety standards Retention system is Microlock (quick release) Features a metal ring for secure lock ability Provides ample ear cavity space for most speaker systems A clear coat finish to protect paint & graphics A large-size FX-36 weighs 1.85kg or 4.10 lbs. Removable, washable & custom sizable Interior AFX helmet liners & cheek pads are made with a hypoallergenic andanti-microbial nylon, most of which are removable &

Washable.

The size of this helmet is based on a combination of four factors: outer shell size, inner EPS thickness, comfort liner thickness & cheek pad thickness. The fit of the helmet can be customized by replacing your existing cheek pads with thinner cheek pads (for a looser fit) or thicker cheek pads (for a tighter fit). The fit can also be customized by replacing your existing comfort liner with a thinner comfort liner (for a looser fit) or thicker comfort liner (for a tighter fit). Please refer to the shell, liner & cheek pad compatibility chart below. Keep in mind these components can only be replaced inside the group of sizes contained in each size range block. Helmet Shell & EPS Size XS-M L-XXL XS S M L XL XXL Check Pad Thickness (mm) 27 27 24 24 21 21 Comfort Liner Thickness (mm) 18 15 12 9 6 4 Note Please note that as long as nothing else is written in the article description, all helmets that have a visor as standard will be delivered with a clear one, even if it is shown differently.



...
Archived Product
kr593.40
AFX designed & patented AMPD™ frameless double lens snow shield. example picture ...
Archived Product
kr1604.83
Helmet Technology Shell Design: An aerodynamic shell design constructed using an advanced lightweight composite poly-alloy Face Shield: A flush-fit, built in side-cover style face shield that is optically correct, compound-curved, scratch-resistant & protects against UV-rays. Shield can be removed to allow open face riding or for use with most goggles. Optional outer shield, 3 position 9cm (3.5”)long shield mounted on outside of the clear shield & moving independently from the clear shield. Will also work with the visor removed & the street side covers installed Ventilation: 9 points of ventilation with chin, side, forehead, top & rear vent. 3 intake vents & 6 exhaust vents Visor: A removable & adjustable (30mm) screw-on visor. Shield can also be used without the visor. Side cover kit included This helmet model meets or exceeds both ECE 22.05 & DOT FMVSS-218 motorcycle helmet safety standards Retention system is Microlock (quick release) Provides ample ear cavity space for most speaker systems A clear coat finish to protect paint & graphics A large-size FX-39DS weighs 1.59kg or 3.50 lbs. Removable, washable & custom sizable Interior AFX helmet liners & cheek pads are made with a hypoallergenic andanti-microbial nylon, most of which are removable &

Washable.

The size of this helmet is based on a combination of four factors: outer shell size, inner EPS thickness, comfort liner thickness & cheek pad thickness. The fit of the helmet can be customized by replacing your existing cheek pads with thinner cheek pads (for a looser fit) or thicker cheek pads (for a tighter fit). The fit can also be customized by replacing your existing comfort liner with a thinner comfort liner (for a looser fit) or thicker comfort liner (for a tighter fit). Please refer to the shell, liner & cheek pad compatibility chart below. Keep in mind these components can only be replaced inside the group of sizes contained in each size range block. Helmet Shell & EPS Size XS-M L-XXL XS S M L XL XXL Check Pad Thickness (mm) 32 28 20 32 24 20 Comfort Liner Thickness (mm) 14 12 8 12 8 6 Note Please be aware, as long as nothing else is written in the item description: All helmets will be delivered only with the ECE certification by default all helmets that have a visor will be delivered with a clear visor, even if it is shown differently.



...
Available
kr1701.62
Helmet Technology Shell Design: An aerodynamic shell design constructed using an advanced lightweight composite poly-alloy Face Shield: A flush-fit, quick release screw on face shield that is optically correct, compound-curved, scratch-resistant & protects against UV-rays. Shield can be removed to allow open face riding or for use with most goggles Visor: A removable & adjustable (40mm) screw-on visor. Shield can also be used without the visor. Side cover kit included. Ventilation: 17 points of ventilation with chin, side, forehead, top & rear vent. 7 intake vents & 10 exhaust vents Inner Sun Shield: Smoke tinted inner flip down sun shield system with left side slide lever This helmet model meets or exceeds both ECE 22.05 & DOT FMVSS-218 motorcycle helmet safety standards Retention system is Microlock (quick release) Provides ample ear cavity space for most speaker systems A clear coat finish to protect paint & graphics A large-size FX-41DS weighs 1.68kg or 3.69 lbs Removable, washable & custom sizable Interior AFX helmet liners & cheek pads are made with a hypoallergenic andanti-microbial nylon, most of which are removable &

Washable.

The size of this helmet is based on a combination of four factors: outer shell size, inner EPS thickness, comfort liner thickness & cheek pad thickness. The fit of the helmet can be customized by replacing your existing cheek pads with thinner cheek pads (for a looser fit) or thicker cheek pads (for a tighter fit). The fit can also be customized by replacing your existing comfort liner with a thinner comfort liner (for a looser fit) or thicker comfort liner (for a tighter fit). Please refer to the shell, liner & cheek pad compatibility chart below. Keep in mind these components can only be replaced inside the group of sizes contained in each size range block. Helmet Shell & EPS Size XS-S M L XL-XXL XS S M L XL XXL Check Pad Thickness (mm) 38 34 28 30 24 22 Comfort Liner Thickness (mm) 8 4 8 8 10 6 Note Please note that as long as nothing else is written in the article description, all helmets that have a visor as standard will be delivered with a clear one, even if it is shown differently.



...
Archived Product
kr1882.96
Helmet Technology Shell Design: An aerodynamic shell design constructed using an advanced lightweight composite poly-alloy Face Shield: A flush-fit, quick release screw on face shield that is optically correct, compound-curved, scratch-resistant & protects against UV-rays. Shield can be removed to allow open face riding or for use with most goggles Visor: A removable & adjustable (40mm) screw-on visor. Shield can also be used without the visor. Side cover kit included. Ventilation: 17 points of ventilation with chin, side, forehead, top & rear vent. 7 intake vents & 10 exhaust vents Inner Sun Shield: Smoke tinted inner flip down sun shield system with left side slide lever This helmet model meets or exceeds both ECE 22.05 & DOT FMVSS-218 motorcycle helmet safety standards Retention system is Microlock (quick release) Provides ample ear cavity space for most speaker systems A clear coat finish to protect paint & graphics A large-size FX-41DS weighs 1.68kg or 3.69 lbs Removable, washable & custom sizable Interior AFX helmet liners & cheek pads are made with a hypoallergenic andanti-microbial nylon, most of which are removable &

Washable.

The size of this helmet is based on a combination of four factors: outer shell size, inner EPS thickness, comfort liner thickness & cheek pad thickness. The fit of the helmet can be customized by replacing your existing cheek pads with thinner cheek pads (for a looser fit) or thicker cheek pads (for a tighter fit). The fit can also be customized by replacing your existing comfort liner with a thinner comfort liner (for a looser fit) or thicker comfort liner (for a tighter fit). Please refer to the shell, liner & cheek pad compatibility chart below. Keep in mind these components can only be replaced inside the group of sizes contained in each size range block. Helmet Shell & EPS Size XS-S M L XL-XXL XS S M L XL XXL Check Pad Thickness (mm) 38 34 28 30 24 22 Comfort Liner Thickness (mm) 8 4 8 8 10 6 Note Please note that as long as nothing else is written in the article description, all helmets that have a visor as standard will be delivered with a clear one, even if it is shown differently.



...
Archived Product
kr1497.19
Shell design An aerodynamic shell design constructed using an advanced lightweight composite poly-alloy A clear coat finish to protect paint & graphics Ventilation 17 points of ventilation with chin, side, forehead, top & rear vent 7 intake vents & 10 exhaust vents Peak A removable & adjustable (40 mm) screw-on peak Visor can also be used without the peak, side cover kit included Ear pocket Provides ample ear cavity space for most speaker systems Visor Pinlock-ready & tinted visors optionally available Sun visor Dark tinted inner flip-down sun visor system with left-side slide lever Retention system Microlock (quick release) Weight A large-size FX-41DS weighs 1.68kg or 3.69 lbs Certification This helmet model meets or exceeds both ECE 22.05 & DOT FMVSS-218 motorcycle helmet safety standards Removable, washable & custom sizeable interior The size of this helmet is based on a combination of four factors: outer shell size, inner EPS thickness, comfort liner thickness & cheek pad thickness. The fit of the helmet can be customized by replacing your existing cheek pads with thinner cheek pads (for a looser fit) or thicker cheek pads (for a tighter fit). The fit can also be customized by replacing your existing comfort liner with a thinner comfort liner (for a looser fit) or thicker comfort liner (for a tighter fit). Please refer to the shell, liner & cheek pad compatibility chart below. Keep in mind these components can only be replaced inside the group of sizes contained in each size range block. Shell & EPS Size XXS/XS/S M L/XL/XXL XXS XS S M L XL XXL Cheek pads (mm) 25 22 19 22 19 16 14 Confort-Liner (mm) 21 18 15 15 12 9 6 Note Please be aware, as long as nothing else is written in the item description: All helmets will be delivered only with the ECE certification by default all helmets that have a visor will be delivered with a clear visor, even if it is shown differently. ...
Available
kr2149.74
Shell design An aerodynamic shell design constructed using an advanced lightweight composite poly-alloy A clear coat finish to protect paint & graphics Ventilation 17 points of ventilation with chin, side, forehead, top & rear vent 7 intake vents & 10 exhaust vents Peak A removable & adjustable (40 mm) screw-on peak Visor can also be used without the peak, side cover kit included Ear pocket Provides ample ear cavity space for most speaker systems Visor Pinlock-ready & tinted visors optionally available Sun visor Dark tinted inner flip-down sun visor system with left-side slide lever Retention system Microlock (quick release) Weight A large-size FX-41DS weighs 1.68kg or 3.69 lbs Certification This helmet model meets or exceeds both ECE 22.05 & DOT FMVSS-218 motorcycle helmet safety standards Removable, washable & custom sizeable interior The size of this helmet is based on a combination of four factors: outer shell size, inner EPS thickness, comfort liner thickness & cheek pad thickness. The fit of the helmet can be customized by replacing your existing cheek pads with thinner cheek pads (for a looser fit) or thicker cheek pads (for a tighter fit). The fit can also be customized by replacing your existing comfort liner with a thinner comfort liner (for a looser fit) or thicker comfort liner (for a tighter fit). Please refer to the shell, liner & cheek pad compatibility chart below. Keep in mind these components can only be replaced inside the group of sizes contained in each size range block. Shell & EPS Size XXS/XS/S M L/XL/XXL XXS XS S M L XL XXL Cheek pads (mm) 25 22 19 22 19 16 14 Confort-Liner (mm) 21 18 15 15 12 9 6 Note Please be aware, as long as nothing else is written in the item description: All helmets will be delivered only with the ECE certification by default all helmets that have a visor will be delivered with a clear visor, even if it is shown differently. ...
Available

AFX FX-39DS, Enduro Helmet

Helmet Technology Shell Design: An aerodynamic shell design constructed using an advanced lightweight composite poly-alloy Face Shield: A flush-fit, built in side-cover style face shield that is optically correct, compound-curved, scratch-resistant and protects against UV-rays. Shield can be removed to allow open face riding or for use with most goggles. Optional outer shield, 3 position 9cm (3.5”)long shield mounted on outside of the clear shield and moving independently from the clear shield. Will also work with the visor removed and the street side covers installed Ventilation: 9 points of ventilation with chin, side, forehead, top and rear vent. 3 intake vents and 6 exhaust vents Visor: A removable and adjustable (30mm) screw-on visor. Shield can also be used without the
visor. Side cover kit included This helmet model meets or exceeds both ECE 22.05 and DOT FMVSS-218 motorcycle helmet safety standards Retention system is Microlock (quick release) Provides ample ear cavity space for most speaker systems A clear coat finish to protect paint & graphics A large-size FX-39DS weighs 1.59kg or 3.50 lbs. Removable, washable and custom sizable Interior AFX helmet liners and cheek pads are made with a hypoallergenic andanti-microbial nylon, most of which are removable and washable. The size of this helmet is based on a combination of four factors: outer shell size, inner EPS thickness, comfort liner thickness and cheek pad thickness. The fit of the helmet can be customized by replacing your existing cheek pads with thinner cheek pads (for a looser fit) or
thicker cheek pads (for a tighter fit). The fit can also be customized by replacing your existing comfort liner with a thinner comfort liner (for a looser fit) or thicker comfort liner (for a tighter fit). Please refer to the shell, liner and cheek pad compatibility chart below. Keep in mind these components can only be replaced inside the group of sizes contained in each size range block. Helmet Shell & EPS Size XS-M L-XXL XS S M L XL XXL Check Pad Thickness (mm) 32 28 20 32 24 20 Comfort Liner Thickness (mm) 14 12 8 12 8 6 Note Please note that as long as nothing else is written in the article description, all helmets that have a visor as standard will be delivered with a clear one, even if it is shown differently.
RIP - This product is no longer available on our network. It was last seen on 24.06.2022

This page now acts as a permanent archive for this product. Add more information using the comments box below to ensure it can still be found by future generations.

Use our search facility to see if it is available from an alternative contributor.
  • Availability: Out Of Stock
  • Supplier: Motoin SE
  • SKU: 45546
Availability: In Stock
kr1318.78

Product Description

Helmet Technology Shell Design: An aerodynamic shell design constructed using an advanced lightweight composite poly-alloy Face Shield: A flush-fit, built in side-cover style face shield that is optically correct, compound-curved, scratch-resistant & protects against UV-rays. Shield can be removed to allow open face riding or for use with most goggles. Optional outer shield, 3 position 9cm (3.5”)long shield mounted on outside of the clear shield & moving independently from the clear shield. Will also work with the visor removed & the street side covers installed Ventilation: 9 points of ventilation with chin, side, forehead, top & rear vent. 3 intake vents & 6 exhaust vents Visor: A removable & adjustable (30mm) screw-on visor. Shield can also be used without the visor. Side cover kit included This helmet model meets or exceeds both ECE 22.05 & DOT FMVSS-218 motorcycle helmet safety standards Retention system is Microlock (quick release) Provides ample ear cavity space for most speaker systems A clear coat finish to protect paint & graphics A large-size FX-39DS weighs 1.59kg or 3.50 lbs. Removable, washable & custom sizable Interior AFX helmet liners & cheek pads are made with a hypoallergenic andanti-microbial nylon, most of which are removable &

Washable.

The size of this helmet is based on a combination of four factors: outer shell size, inner EPS thickness, comfort liner thickness & cheek pad thickness. The fit of the helmet can be customized by replacing your existing cheek pads with thinner cheek pads (for a looser fit) or thicker cheek pads (for a tighter fit). The fit can also be customized by replacing your existing comfort liner with a thinner comfort liner (for a looser fit) or thicker comfort liner (for a tighter fit). Please refer to the shell, liner & cheek pad compatibility chart below. Keep in mind these components can only be replaced inside the group of sizes contained in each size range block. Helmet Shell & EPS Size XS-M L-XXL XS S M L XL XXL Check Pad Thickness (mm) 32 28 20 32 24 20 Comfort Liner Thickness (mm) 14 12 8 12 8 6 Note Please note that as long as nothing else is written in the article description, all helmets that have a visor as standard will be delivered with a clear one, even if it is shown differently.

Reviews/Comments

Add New

Intelligent Comparison

Oooops!
We couldn't find anything!
Perhaps this product's unique.... Or perhaps we are still looking for comparisons!
Click to bump this page and we'll hurry up.

Price History

Vouchers

No voucher codes found.
Do you know a voucher code for this product or supplier? Add it to Insights for others to use.

Facebook

Jargon Buster

Nylon - A family of synthetic polymers
Helmet - A form of protection worn on the head to prevent injury
UV - Ultraviolet - a specific wavelength of light invisible to the human eye
Graphics - A general term for visual aspects of an item/display
Size - is the measurement of how big an object is in space.
Safety - prevents damage being caused.
Quick - Something that is fast
Components - Multiple items used to complete the product.
Comfort - something that feels nice to the user. Often relaxing.
Large - something that takes up more space than normal.
Shell - A hard external structure or surface.
Resistant - Something that can repel against something.
Adjustable - Something that can be changed or slightly modified to fit.
Ventilation - Giving fresh air to a room on someone's lungs.
Design - A drawing or styles that shows the look and functionality of something before its made.
Adjustable - Something that can be changed in order to fit better.
Interior - The inside of something, usually what is not visible.
Goggles - A protective form of eye ware to cover the eyes, also someone who stares in amazement or wonder.
Model - A representation of a person or thing, usually smaller scale. It can also be a person that wears clothing.
Combination - The process of two of more things being mixed or combined together.

Supplier Information

Motoin SE
Page Updated: 2025-02-05 20:08:21

Community Generated Product Tags

Oh No! The productWIKI community hasn't generated any tags for this product yet!
Menu