Shell design An aerodynamic shell design constructed using an advanced lightweight composite poly-alloy Cut out on shell sides to accommodate most neck brace designs A clear coat finish to protect paint & graphics Ventilation 24 points of ventilation with chin, side, forehead, top & rear vent 14 intake vents. 6 exhaust vents positioned to maximize negative pressure suction Chin vent Screw in replaceable chin vent for easy replacement or cleaning Thermal Dome (TM) 4 Thermal Domes (TM) heat extraction vents (patent pending) Goggle guide on eyeport trim Goggle strap grabbers Peak A removable & adjustable (50 mm) screw-on visor Retention system Race approved Double D-Ring Weight A large-size FX-19R weighs 1.36kg or 3.00 lbs Certification This helmet model meets or exceeds both ECE 22.05 & DOT FMVSS-218 motorcycle helmet safety standards Removable, washable & custom sizeable interior The size of this helmet is based on a combination of four factors: outer shell size, inner EPS thickness, comfort liner thickness & cheek pad thickness. The fit of the helmet can be customized by replacing your existing cheek pads with thinner cheek pads (for a looser fit) or thicker cheek pads (for a tighter fit). The fit can also be customized by replacing your existing comfort liner with a thinner comfort liner (for a looser fit) or thicker comfort liner (for a tighter fit). Please refer to the shell, liner & cheek pad compatibility chart below. Keep in mind these components can only be replaced inside the group of sizes contained in each size range block. Shell & EPS Size XXS/XS/S L/XL/XXL XS S M L XL XXL Cheek pads (mm) 26 22 18 26 22 18 Confort-Liner (mm) 10 8 6 10 8 6 Note Please be aware, as long as nothing else is written in the item description: All helmets will be delivered only with the ECE certification by default ...

Shell design An aerodynamic shell design constructed using an advanced lightweight composite poly-alloy Cut out on shell sides to accommodate most neck brace designs A clear coat finish to protect paint & graphics Ventilation 24 points of ventilation with chin, side, forehead, top & rear vent 14 intake vents. 6 exhaust vents positioned to maximize negative pressure suction Chin vent Screw in replaceable chin vent for easy replacement or cleaning Thermal Dome (TM) 4 Thermal Domes (TM) heat extraction vents (patent pending) Goggle guide on eyeport trim Goggle strap grabbers Peak A removable & adjustable (50 mm) screw-on visor Retention system Race approved Double D-Ring Weight A large-size FX-19R weighs 1.36kg or 3.00 lbs Certification This helmet model meets or exceeds both ECE 22.05 & DOT FMVSS-218 motorcycle helmet safety standards Removable, washable & custom sizeable interior The size of this helmet is based on a combination of four factors: outer shell size, inner EPS thickness, comfort liner thickness & cheek pad thickness. The fit of the helmet can be customized by replacing your existing cheek pads with thinner cheek pads (for a looser fit) or thicker cheek pads (for a tighter fit). The fit can also be customized by replacing your existing comfort liner with a thinner comfort liner (for a looser fit) or thicker comfort liner (for a tighter fit). Please refer to the shell, liner & cheek pad compatibility chart below. Keep in mind these components can only be replaced inside the group of sizes contained in each size range block. Shell & EPS Size XXS/XS/S L/XL/XXL XS S M L XL XXL Cheek pads (mm) 26 22 18 26 22 18 Confort-Liner (mm) 10 8 6 10 8 6 Note Please be aware, as long as nothing else is written in the item description: All helmets will be delivered only with the ECE certification by default ...

Shell design An aerodynamic shell design constructed using an advanced lightweight composite poly-alloy Cut out on shell sides to accommodate most neck brace designs A clear coat finish to protect paint & graphics Ventilation 24 points of ventilation with chin, side, forehead, top & rear vent 14 intake vents. 6 exhaust vents positioned to maximize negative pressure suction Chin vent Screw in replaceable chin vent for easy replacement or cleaning Thermal Dome (TM) 4 Thermal Domes (TM) heat extraction vents (patent pending) Goggle guide on eyeport trim Goggle strap grabbers Peak A removable & adjustable (50 mm) screw-on visor Retention system Race approved Double D-Ring Weight A large-size FX-19R weighs 1.36kg or 3.00 lbs Certification This helmet model meets or exceeds both ECE 22.05 & DOT FMVSS-218 motorcycle helmet safety standards Removable, washable & custom sizeable interior The size of this helmet is based on a combination of four factors: outer shell size, inner EPS thickness, comfort liner thickness & cheek pad thickness. The fit of the helmet can be customized by replacing your existing cheek pads with thinner cheek pads (for a looser fit) or thicker cheek pads (for a tighter fit). The fit can also be customized by replacing your existing comfort liner with a thinner comfort liner (for a looser fit) or thicker comfort liner (for a tighter fit). Please refer to the shell, liner & cheek pad compatibility chart below. Keep in mind these components can only be replaced inside the group of sizes contained in each size range block. Shell & EPS Size XXS/XS/S L/XL/XXL XS S M L XL XXL Cheek pads (mm) 26 22 18 26 22 18 Confort-Liner (mm) 10 8 6 10 8 6 Note Please be aware, as long as nothing else is written in the item description: All helmets will be delivered only with the ECE certification by default ...

Shell design An aerodynamic shell design constructed using an advanced lightweight composite poly-alloy Cut out on shell sides to accommodate most neck brace designs A clear coat finish to protect paint & graphics Ventilation 24 points of ventilation with chin, side, forehead, top & rear vent 14 intake vents. 6 exhaust vents positioned to maximize negative pressure suction Chin vent Screw in replaceable chin vent for easy replacement or cleaning Thermal Dome (TM) 4 Thermal Domes (TM) heat extraction vents (patent pending) Goggle guide on eyeport trim Goggle strap grabbers Peak A removable & adjustable (50 mm) screw-on visor Retention system Race approved Double D-Ring Weight A large-size FX-19R weighs 1.36kg or 3.00 lbs Certification This helmet model meets or exceeds both ECE 22.05 & DOT FMVSS-218 motorcycle helmet safety standards Removable, washable & custom sizeable interior The size of this helmet is based on a combination of four factors: outer shell size, inner EPS thickness, comfort liner thickness & cheek pad thickness. The fit of the helmet can be customized by replacing your existing cheek pads with thinner cheek pads (for a looser fit) or thicker cheek pads (for a tighter fit). The fit can also be customized by replacing your existing comfort liner with a thinner comfort liner (for a looser fit) or thicker comfort liner (for a tighter fit). Please refer to the shell, liner & cheek pad compatibility chart below. Keep in mind these components can only be replaced inside the group of sizes contained in each size range block. Shell & EPS Size XXS/XS/S L/XL/XXL XS S M L XL XXL Cheek pads (mm) 26 22 18 26 22 18 Confort-Liner (mm) 10 8 6 10 8 6 Note Please be aware, as long as nothing else is written in the item description: All helmets will be delivered only with the ECE certification by default ...

Helmet Technology Shell Design: An aerodynamic shell design constructed using an advanced lightweight composite poly-alloy. Ventilation: 11 points of ventilation with chin, side, forehead, top & rear vent. 3 intake vents & 8 exhaust vents Cone-Head EPS: Advanced in-molded® cone-head® ultra light weight EPS protection system. In-mold construction fuses the helmet s outer shell with the impact-absorbing EPS liner. The two materials are fused together, & one is reinforced by the other. This exoskeleton allows helmets to be engineered that are lighter, more durable & better ventilated Visor: A removable & adjustable (40mm) screw-on visor This helmet model meets or exceeds both ECE 22.05 & DOT FMVSS-218 motorcycle helmet safety standards Retention system is a race approved Double D-RING Provides ample ear cavity space for most speaker systems A clear coat finish to protect paint & graphics A large-size FX-21 weighs 1.34kg or 2.96 lbs Removable, washable & custom sizable Interior AFX helmet liners & cheek pads are made with a hypoallergenic andanti-microbial nylon, most of which are removable &

Washable.

The size of this helmet is based on a combination of four factors: outer shell size, inner EPS thickness, comfort liner thickness & cheek pad thickness. The fit of the helmet can be customized by replacing your existing cheek pads with thinner cheek pads (for a looser fit) or thicker cheek pads (for a tighter fit). The fit can also be customized by replacing your existing comfort liner with a thinner comfort liner (for a looser fit) or thicker comfort liner (for a tighter fit). Please refer to the shell, liner & cheek pad compatibility chart below. Keep in mind these components can only be replaced inside the group of sizes contained in each size range block. Helmet Shell & EPS Size XS-S M-L XL-XXL XS S M L XL XXL Check Pad Thickness (mm) 40 35 35 30 30 25 Comfort Liner Thickness (mm) 20 18 16 14 14 10 Note Please note that as long as nothing else is written in the article description, all helmets that have a visor as standard will be delivered with a clear one, even if it is shown differently.



...

Helmet Technology Shell Design: A sleek European influenced shell design constructed using an advanced lightweight composite poly-alloy Face Shield: A flush-fit, lock down, side-coverless face shield that is optically correct, compound-curved, scratch-resistant & protects against UV-rays Quick Release Ratchet: Quick release shield ratchet system Ventilation: 8 points of ventilation with chin, side, forehead, top & rear vent. 3 intake vents & 5 exhaust vents This helmet model meets or exceeds both ECE 22.05 & DOT FMVSS-218 motorcycle helmet safety standards Retention system is a race approved Double D-RING Provides ample ear cavity space for most speaker systems A clear coat finish to protect paint & graphics A large-size FX-24 weighs 1.53kg or 3.3 lbs Removable, washable & custom sizable Interior AFX helmet liners & cheek pads are made with a hypoallergenic andanti-microbial nylon, most of which are removable &

Washable.

The size of this helmet is based on a combination of four factors: outer shell size, inner EPS thickness, comfort liner thickness & cheek pad thickness. The fit of the helmet can be customized by replacing your existing cheek pads with thinner cheek pads (for a looser fit) or thicker cheek pads (for a tighter fit). The fit can also be customized by replacing your existing comfort liner with a thinner comfort liner (for a looser fit) or thicker comfort liner (for a tighter fit). Please refer to the shell, liner & cheek pad compatibility chart below. Keep in mind these components can only be replaced inside the group of sizes contained in each size range block. Helmet Shell & EPS Size XS-M L-XXL XS S M L XL XXL Check Pad Thickness (mm) 30 27 24 24 21 18 Comfort Liner Thickness (mm) 9 6 4 12 9 6 Note Please be aware, as long as nothing else is written in the item description: All helmets will be delivered only with the ECE certification by default all helmets that have a visor will be delivered with a clear visor, even if it is shown differently.



...

Helmet Technology Shell Design: A sleek European influenced shell design constructed using an advanced lightweight composite poly-alloy. This helmet is specifically designed to fit youth & small adults Face Shield: A flip-up, flush fit, quick release, single turn screw face shield. The shield itself is optically correct compound curved, scratch-resistant & protects against UV-rays This helmet model meets or exceeds both ECE 22.05 & DOT FMVSS-218 motorcycle helmet safety standards A helmet liner made with a hypo-allergenic & anti-microbial moisture wicking nylon, all of which are washable Retention system is Microlock (quick release) Features a metal ring for secure lock ability A clear coat finish to protect paint & graphics A large-size FX-33Y weighs 0.85kg or 1.80 lbs Note Please note that as long as nothing else is written in the article description, all helmets that have a visor as standard will be delivered with a clear one, even if it is shown differently. ...

Helmet Technology Shell Design: A sleek European influenced shell design constructed using an advanced lightweight composite poly-alloy Face Shield: A flush-fit, lock down, side-coverless face shield that is optically correct, compound-curved, scratch-resistant & protects against UV-rays 1/4 turn fast change Shield Ventilation: 5 points of aerodynamically designed flush fit ventilation with chin, top, rear, & unique side extraction vents. 2 intake vents & 3 exhaust vents Chin Bar: Cam pivot, chin bar linkage system with metal latches for ease of movement & secruity Inner sun Shield: Flip down inner smoke shield with easy to use side actuation lever This helmet model meets or exceeds both ECE 22.05 & DOT FMVSS-218 motorcycle helmet safety standards Retention system is Microlock (quick release) Features a metal ring for secure lock ability Provides ample ear cavity space for most speaker systems A clear coat finish to protect paint & graphics A large-size FX-36 weighs 1.85kg or 4.10 lbs. Removable, washable & custom sizable Interior AFX helmet liners & cheek pads are made with a hypoallergenic andanti-microbial nylon, most of which are removable &

Washable.

The size of this helmet is based on a combination of four factors: outer shell size, inner EPS thickness, comfort liner thickness & cheek pad thickness. The fit of the helmet can be customized by replacing your existing cheek pads with thinner cheek pads (for a looser fit) or thicker cheek pads (for a tighter fit). The fit can also be customized by replacing your existing comfort liner with a thinner comfort liner (for a looser fit) or thicker comfort liner (for a tighter fit). Please refer to the shell, liner & cheek pad compatibility chart below. Keep in mind these components can only be replaced inside the group of sizes contained in each size range block. Helmet Shell & EPS Size XS-M L-XXL XS S M L XL XXL Check Pad Thickness (mm) 27 27 24 24 21 21 Comfort Liner Thickness (mm) 18 15 12 9 6 4 Note Please note that as long as nothing else is written in the article description, all helmets that have a visor as standard will be delivered with a clear one, even if it is shown differently.



...

AFX designed & patented AMPD™ frameless double lens snow shield. example picture ...

Helmet Technology Shell Design: An aerodynamic shell design constructed using an advanced lightweight composite poly-alloy Face Shield: A flush-fit, built in side-cover style face shield that is optically correct, compound-curved, scratch-resistant & protects against UV-rays. Shield can be removed to allow open face riding or for use with most goggles. Optional outer shield, 3 position 9cm (3.5”)long shield mounted on outside of the clear shield & moving independently from the clear shield. Will also work with the visor removed & the street side covers installed Ventilation: 9 points of ventilation with chin, side, forehead, top & rear vent. 3 intake vents & 6 exhaust vents Visor: A removable & adjustable (30mm) screw-on visor. Shield can also be used without the visor. Side cover kit included This helmet model meets or exceeds both ECE 22.05 & DOT FMVSS-218 motorcycle helmet safety standards Retention system is Microlock (quick release) Provides ample ear cavity space for most speaker systems A clear coat finish to protect paint & graphics A large-size FX-39DS weighs 1.59kg or 3.50 lbs. Removable, washable & custom sizable Interior AFX helmet liners & cheek pads are made with a hypoallergenic andanti-microbial nylon, most of which are removable &

Washable.

The size of this helmet is based on a combination of four factors: outer shell size, inner EPS thickness, comfort liner thickness & cheek pad thickness. The fit of the helmet can be customized by replacing your existing cheek pads with thinner cheek pads (for a looser fit) or thicker cheek pads (for a tighter fit). The fit can also be customized by replacing your existing comfort liner with a thinner comfort liner (for a looser fit) or thicker comfort liner (for a tighter fit). Please refer to the shell, liner & cheek pad compatibility chart below. Keep in mind these components can only be replaced inside the group of sizes contained in each size range block. Helmet Shell & EPS Size XS-M L-XXL XS S M L XL XXL Check Pad Thickness (mm) 32 28 20 32 24 20 Comfort Liner Thickness (mm) 14 12 8 12 8 6 Note Please note that as long as nothing else is written in the article description, all helmets that have a visor as standard will be delivered with a clear one, even if it is shown differently.



...