United Kingdom
France
Germany
Netherlands
Sweden
USA
Italy
Spain
Accessories>Bodywork>Battery packs / Charger / Adapte
Available
-
SAE to TM adapter cable
withe plug and closure.
Features Length=
6″/15cm Cable max.
rating: 5 Amp very low
temperature use up to
-40°C Includes rubber
cap and seal for OptiMate
SAE connector
Availability: In Stock
kr144.26 SEK
Available
-
The complete adapter kit
for SAE to DC 2.5 mm.
Features Includes
everything you need to
transform SAE to DC2.5mm
and vice versa – SAE to
DC2.5mm socket, plug or
SAE to SAE Kit includes:
Polarity Adapter, SAE
– DC Socket and Plug
Adapter Length 12″/30
cm Industry standard
durability – Built to
last! Perfect for use in
the harshest
environments, Low
temperature use -40°
C/-40° F – Remains
Flexible! CABLE RATING:
16 AWG (1.32 mm2) SPT-2W
STYLE: Weatherproof,
in-line seals included
O-67 KIT includes 3
separate cable adapters
O-67M adapter, SAE to
2.5mm jack/plug O-67F
adapter, SAE to 2.5mm
socket O-27, SAE to SAE
polarity adapter Length
O-67M: 12″/30 cm O-67F:
12″/30 cm O-27: 6″/15
cm Connectors O-67M: SAE
2-pin to 2.5 × 5.5 mm DC
jack/plug O-67F: SAE
2-pin to 2.5 × 5.5 mm DC
socket O-27: SAE 2-pin to
SAE 2-pin, with inverted
polarity
Availability: In Stock
kr257.02
Available
-
Converts the Ducati
diagnostic connector to
an OptiMate SAE battery
charger connector.
Features Ideal for
OptiMate 1, 2, 3, 4
and OptiMate 6 battery
chargers Works on all
2010 – 2019 Ducati
models except 848 –
848Evo – 1198SP Fuse
protected, with
weatherproof cap and seal
for SAE connector Cable
rated for use from 60° C
/ 140° F down to -40°
C/-40° F – Remains
Flexible below freezing!
LENGTH: 12″/30 cm
CONNECTORS: Ducati >2010
to SAE CABLE RATING: 18
AWG (0.82 mm2) SPT-1
FUSE: 7.5 Amp STYLE:
Iincludes sealing cap for
OptiMATE heavy duty SAE
connector.
Availability: In Stock
kr482.86
Available
-
Create a weatherproof
bulkhead/panel mount SAE
power point. Features
Drop in replacement for
the BMW, Triumph &
Ducati 12V DIN
‘Hella’ socket Front
panel mount with rear
fastener Connector body
fits a Ø 18 mm
(23/32”) drilled hole
Industry standard
durability – Built to
last! Perfect for use in
the harshest
environments, Low
temperature use -40°
C/-40° F – Remains
Flexible LENGTH:
40″/100 cm CONNECTORS:
SAE to SAE CABLE RATING:
18 AWG (0.82 mm2) SPT-2W
STYLE: Front mount, rear
fastener, for panel from
1 mm / 0.040″ thickness
Includes in-line rubber
seal for OptiMATE SAE
connector
Availability: In Stock
kr181.74
Available
-
The perfect travel
extender Features Length
40″/100 cm Extend your
SAE connection Industry
standard durability –
Built to last! Includes
weatherproof rubber seal
for heavy duty SAE
connector Perfect for use
in the harshest
environments, Low
temperature use -40°
C/-40° F – Remains
Flexible! LENGTH:
40″/100 cm CONNECTORS:
SAE to SAE CABLE RATING:
18 AWG (0.82 mm2) SPT-2W
STYLE: Includes in-line
rubber seal for OptiMATE
heavy duty SAE connector
Availability: In Stock
kr149.48
Available
-
The converter cable from
DIN ø 12 mm BIKE socket
to SAE – 100 cm/40
inch. Features The DIN /
ISO 4165 standard
OptiMate BIKE plug fits
12 V sockets of BMW,
Triumph & Ducati
Multistrada motorcycles
and some marine and
agricultural equipment.
90° angled connection
– low profile! Includes
weatherproof in-line SAE
seal Perfect for use in
the harshest
environments, Low
temperature use
-40°C/-40°F – Remains
Flexible! LENGTH:
40″/100 cm CONNECTORS:
Low profile Ø 12 mm DIN
/ BIKE 90° plug to SAE
CABLE RATING: 18 AWG
(0.82 mm2) SPT-2W STYLE:
Includes in-line rubber
seal for OptiMATE heavy
duty SAE connector
Availability: In Stock
kr300.04
Available
-
Spring loaded DIN bike
socket. Features Fits
BMW, Triumph, Victory,
selected Honda Goldwing
motorcycles and John
Deere ATV’s Two pin
connector with metal
sealing nut Heavy duty
spring load cap Strong
locking connection to
devices Durable metal
casing LENGTH: 11/16” /
18 mm Hole size
CONNECTORS: ¼’/6 mm
Spade connector to Ø 12
mm DIN Metal socket USE:
-40° C/-40° F very low
temperature use STYLE:
Premium BIKE socket
designed by TecMate
Availability: In Stock
kr149.48
Available
-
OptiMate Lithium 0.8A,
the essential battery
charger for the
12.8V/13.2V LiFeP04 / LFP
in your off-road,
moto-cross or race
motorcycle. Ultimate
protection for your high
performance Lithium
battery. Features Helps
to maintain your lithium
iron phosphate battery
and ensure a long battery
life Checks battery for
short circuits, dead
cells and voltage
retention Battery
maintainer’s specific
program efficiently
recharges and balances
energy cell levels Ideal
for Lithium (LiFePO4)
12.8/13.2V batteries from
1 – 10Ah Charging amps:
0.8A (constant current)
Charging Volts: nominal:
12.8V range: 0.5V –
14.4V Operation: Fully
automatic Comes with
EU-Plug
Availability: In Stock
kr794.73
Available
-
Perfect for starter and
deep cycle 12V batteries
that demand accurate
temperature-controlled
charging and safe
unsupervised long-term
maintenance. Features
Voltage selection (14,
4V/14, 7V) to ensure the
battery receives charge
at the correct voltage
Power supply mode
delivers stable power for
vehicle system
reprogramming, showroom
vehicle demo or retaining
memorized settings when
battery cables are
disconnected to fit
powered accessories or
replace the battery 10A
at 14, 4V/14, 7V, 8A @
13, 6V charging amps For
indoor/ outdoor (lowest
temperature: -40 °C /
-40 °F) Ideal for STD,
AGM, gel and deep cycle
12V batteries from 3Ah
– 400Ah Weatherproof
case with wall mounts,
with 180 cm (6’) AC
supply lead and 180 cm
(6’) AC charge lead
ending in SAE connector
Comes with EU-plug
Availability: In Stock
kr1999.19
Available
-
World’s most advanced
fully automatic 12V
battery charger. Saves
batteries other chargers
can’t by recognizing
the difference between a
battery that needs
charging and a dead flat
sulphated battery that
needs saving. Features
Perfect for months-long
maintenance of any size
12V lead-acid battery
Restores neglected
batteries from as low as
0, 5V Ampmatic charge
control adjusts current
to suit any battery size
and condition for fastest
and most complete charge
Charging amps: 10A at 14,
4V Can be used in
temperatures as low as
-40 °C (-40 °F) Ideal
for STD, AGM, gel and
deep cycle 12V batteries
from 3Ah – 400Ah Input:
global (100V-240V
50Hz-60Hz),
high-efficiency,
fully-sealed Weatherproof
battery lead and standard
battery clip set included
No risk of overcharging,
totally safe for vehicle
electronics Sparks
suppressed, safe for
long-term battery
maintenance, automatic
shut-down if
short-circuited or
battery disconnected
Comes wit EU-plug
Availability: In Stock
kr1816.37
Available
-
OptiMate 3, the most
trusted fully sealed
battery saving charger &
maintainer for your
motorcycle, ATV, Side
by Side or personal
watercraft – The most
popular motorcycle
charger world-wide!
Features Smaller,
lighter and more powerful
than its predecessor
Diagnoses, recovers,
charges, checks and
maintains batteries
safely for months
Advanced, fully
automatic battery charger
and maintainer for all
12V lead-acid batteries
from 2, 5A to 50A hours
capacity Recommended for
sealed and conventional
batteries for motorcycles
and similar vehicles,
including dry-charged MF,
sealed wet
maintenance-free types,
AGM and sealed deep-cycle
gel batteries Features
vent-free enclosure, SAE
weatherproof connectors
and includes wall mounts
Unique diagnostic
function automatically
identifies deeply
discharged (sulphated)
batteries and applies a
controlled high voltage
with small fixed current
for a limited period to
recover them Includes two
detachable,
interchangeable battery
connectors: a connector
with eyelets for
permanent connection and
battery clips for bench
charging Comes with
global input (100V-240V)
Ideal for AGM, GEL & STD
12V batteries from 3 –
40Ah Charging Amps: 0.8A
(constant current)
Charging Volts: nominal:
12V range: 2V – 14.4V
Operation: Fully
automatic Comes with
EU-plug
Availability: In Stock
kr794.73
Available
-
OptiMate 1 DUO, the
‘no brainer’ battery
maintainer for the
hi-technology battery in
your performance power
sport vehicle –
Guarantees healthy
lithium or lead-acid
batteries! Features
Maintains any type of 12V
lead-acid or 12, 8V
lithium battery from
2Ah-20Ah Four-step
program Low-volt start of
4V Delivers a constant
600mA current Tests and
delivers only what the
battery needs without
ever overcharging or
undercharging Premium
charge accessory cables
are included with every
charger Ideal for AGM,
GEL & STD 12V batteries &
Lithium (LiFePO4)
12.8/13.2V batteries from
2 – 20Ah Charging Amps:
0.6A (constant current)
Charging Volts: nominal:
12V & 12.8V range: 4V –
14.4V Operation: Fully
automatic Comes with
EU-plug
Availability: In Stock
kr536.63
Available
-
OptiMate 7 12-24V, the
smart and powerful
battery charger and
maintainer for the 12V or
24V battery in your car,
boat, RV, light
aircraft or your medical
equipment – The fastest
charger for starter and
deep cycle batteries!
Features Perfect for
high-performance 12V and
24V starter and deep
cycle batteries Designed
for sensitive electronics
Charging amps: 10A @ 12V
and 5A @ 24V (Ampmatic)
Protects batteries by not
charging if the wrong
voltage is selected
Low-volt start of 0, 5V
(12V) Ideal for STD, AGM
and gel 12V batteries
from 3Ah – 240Ah and
24V batteries from 1Ah
– 100Ah Input: global
(100V-240V 50Hz-60Hz),
high-efficiency, fully
sealed Functions in cold
temperatures down to -40
°C (-40 °F)
Weatherproof, sealed
enclosure Comes with
EU-plug
Availability: In Stock
kr1999.19
Available
-
Replacement charger for
the batteries of the iXS
Heat-ST heated gloves.
Features Comes with EU
plug
Availability: In Stock
kr321.55
Available
-
Create your own DIN ø 12
mm socket with spring cap
on your vehicle Features
Includes weatherproof
permanent battery lead
(O-01) Fits all your DIN
ø 12 mm accessories
Industry standard
durability – Built to
last! Perfect for use in
the harshest
environments, Low
temperature use -40°
C/-40° F – Remains
Flexible! LENGTH:
40″/100 cm CONNECTORS:
1/4″ / M6 Ringlets to
Ø12 mm DIN Metal socket
CABLE RATING: 18 AWG
(0.82 mm2) SPT-2W FUSE:
15 Amp
Availability: In Stock
kr353.81
Available
-
The fully automatic
Battery Tender® 4 AMP is
a top-of-the-line 12 V or
6 V switchable battery
charger, 12 V
Lithium(LiFePO4) perfect
for automotive,
motorcycle, and marine
applications. With 3x the
power of the Battery
Tender® Junior, this
charger is versatile and
powerful. Equipped with a
simplified 4-step
automatic charge process,
all Battery Tender®
battery chargers
automatically switch from
full charge to float
charge mode. Reverse
hook-up protection makes
connecting your charger
safe and easy to do. LED
light indicators make
selecting your charge
mode simple. Features 12
V or 6 V switchable / 4
AMPs Comes with EU-plug
Selectable for
AGM/Standard/GEL or
Lithium (LiFePO4) (12V
only for Lithium) ISM™
(Infinite Sequential
Monitoring) of the fully
automatic 4-step charge
process (qualification,
bulk charge, absorption,
float) Microprocessor
controlled Spark-proof
even when output leads
touch Reverse polarity
protection - no charge or
battery damage State of
charge LED indicators
Includes rings & clips
Weight: 3.15 lbs
Dimensions: 6.8” x
3.68” x 1.96”
(charger only) Lead acid
safety timer: 25 hrs.
Lithium safety timer: 15
hrs.
Availability: In Stock
kr1048.49
Available
-
OptiMate 4 Dual Program,
the most advanced &
trusted 12V battery
saving charger for your
high performance or
touring motorcycle, ATV,
Side by Side or personal
watercraft – Most
energy efficient ‘1
Amp’ charger in the
world! Features OptiMate
4, the ultimate
all-in-one tool for 12V
battery care at home,
now with dual program
that diagnoses,
recovers, charges,
tests and optimally
maintains your battery
automatically Charge the
battery directly or
select the program to
charge via the 12V port
on your CANbus equipped
bike With automatic
keyless activation,
OptiMate 4 Dual Program
will charge and maintain
your battery
automatically until it is
disconnected Includes
low-voltage pulse
recovery for even more
effective recovery of
badly neglected,
sulphated batteries, a
user-friendly battery
test at connection, a
slick weatherproof
enclosure with built-in
mounting lugs and
improved energy
efficiency Extending
battery life by up to
400%, OptiMate 4 Dual
Program will keep your
battery safe and
ready-to-go for months on
end Includes two
detachable,
interchangeable battery
connectors: a connector
with eyelets for
permanent connection and
battery clips for bench
charging Suitable for the
most countries with
220V-240V supply Meets
all relevant EN & IEC
norms and CE directives
Ideal for AGM, GEL & STD
12V batteries from 3 –
50Ah Charging Amps: 1A
(constant current)
Charging Volts: nominal:
12V range: 0.5V – 14.4V
Operation: Fully
automatic Comes with
EU-plug
Availability: In Stock
kr902.27
Available
-
OptiMate Lithium 4s 5A,
the ‘PRO’ battery
charger for the
12.8V/13.2V LiFeP04 / LFP
in performance / race
motorcycles, cars or
craft. The racer /
dealers’ choice!
Features OptiMate
Lithium, the first
OptiMate to protect your
LiFePO4 battery in a way
no other charger has Will
protect your investment
and keep your Lithium
Iron Phosphate (LiFePO4 /
LFP) battery performing
as advertised, for a
very long time With 5
amps of charge current
available, OptiMate
Lithium’s unique
multi-step Ampmatic
program recharges and
balances cells within the
battery quickly and
efficiently OptiMate
Lithium’s maintenance
program delivers current
to the vehicle circuitry,
protecting and keeping
the battery at 100%
charge Tests and displays
battery condition before
charging Voltage
retention test is
conducted for 30 minutes
during which no charge
current is delivered,
and provides results
indicating the
battery’s general state
of health The 12-hour
MAINTENANCE CHARGE CYCLE
consists of 30-minute
float charge periods at a
voltage of 13, 6V
followed by and
alternating with 30
minute “rest” (no
charge current) periods
During the float charge
period, current is
delivered only if the
battery has lost charge
due to connected vehicle
circuitry, a refresh
cycle may be performed if
the charge level has
dropped significantly
Charge progress is
tracked against the ideal
LiFePO4 charge curve,
internal damage will be
detected and unnecessary
charging of a battery
that cannot be recovered
is prevented Includes
permanent ringlet
connector with
weatherproof cap and a
set of battery clips
Ideal for Lithium
(LiFePO4) 12.8/13.2V
batteries from 3 –
100Ah Charging Amps: 5A
(Ampmatic current)
Charging Volts: nominal:
12.8V range: 0.5V –
14.4V Operation: Fully
automatic CE conformity
Comes with EU-plug
Availability: In Stock
kr1515.25
Available
-
Fused custom designed
battery clips to fit all
batteries. Features Fits
round, square and flat
battery post Easy grip
rubber handles 15 A fuse
protect from power surge
and short circuiting
Industry standard
durability – Built to
last! Perfect for use in
the harshest
environments, Low
temperature use -40°
C/-40° F – Remains
Flexible! LENGTH:
20″/50 cm CONNECTORS:
Battery clips to SAE
CABLE RATING: 16 AWG
(1.31 mm2) SPT-2W FUSE:
15 Amp STYLE: Includes
in-line rubber seal for
OptiMATE heavy duty SAE
connector
Availability: In Stock
kr235.52
Available
-
The ideal dual adapter,
easily and quickly charge
battery through DIN or
auto socket Features Fits
both auto and bike
sockets Trusted by
OEM’s Honda, Triumph,
Suzuki and Yamaha Inline
8 A fuse protects against
potential short circuits
Secure locking clips –
vibrations proof Low
temperature use -20°
C/-4° F – Remains
Flexible! LENGTH:
20″/50 cm CONNECTORS:
Ø 21 mm AUTO socket / Ø
12 mm BIKE Plug to SAE
CABLE RATING: 18 AWG
(0.82 mm2) SPT-2 FUSE: 8
Amp (inside connector)
STYLE: Includes in-line
rubber seal for OptiMATE
heavy duty SAE connector.
Availability: In Stock
kr278.53
Available
-
Create your own AUTO
socket from a bike plug
– for an automotive
plug, style USB charger
or GPS adapter. Features
Internal locking slots
keep your accessory
securely in position
whilst riding Fits BMW,
Victory, Triumph & John
Deere charging ports
Industry standard
durability – Built to
last! Includes
weatherproof sealing DIN
plug and Auto socket cap
Low temperature use
-20°C/-4°F – Remains
Flexible! LENGTH:
12″/30 cm CONNECTORS:
BIKE (DIN) plug to Ø 21
mm AUTO socket STYLE:
Includes cap to protect
plug tip
Availability: In Stock
kr289.28
Available
-
Permanent SAE splitter
for powersport vehicles.
Features Double your SAE
connections Includes
three weatherproof seals
Industry standard
durability – Built to
last! Low temperature use
-20° C/-4° F –
Remains Flexible! LENGTH:
12″/30 cm CONNECTORS:
SAE to 2 x SAE CABLE
RATING: 18 AWG (0.82 mm2)
SPT-2 STYLE: Includes
in-line and end cap
rubber seals for OptiMATE
heavy-duty SAE connectors
Availability: In Stock
kr181.74
Available
-
The longest extender for
power sport vehicles.
Features Length 15 ft/460
cm Extend your SAE
connection Industry
standard durability –
Built to last! Includes
weatherproof rubber seal
for heavy-duty SAE
connector Low temperature
use -20° C/-4° F –
Remains Flexible!
CONNECTORS: SAE to SAE
CABLE RATING: 18 AWG
(0.82 mm2) SPT-2 STYLE:
Includes in-line rubber
seal for OptiMATE heavy
duty SAE connector
Availability: In Stock
kr192.50
Available
-
The 4 Bank Battery
Tender® Charging Station
is two encased 1.25 amp
battery chargers designed
to fully charge a battery
and maintain it at proper
storage voltage without
the damaging effects
caused by trickle
chargers. Features Input:
240 VAC, EU-plug 4
independent charging
stations 12 volts / 1.25
amps per station
Extremely lightweight,
less than 6 lbs. (2750
gr.) Microprocessor
controlled constant
current charging Reverse
polarity protected Spark
proof Perfect for all AGM
(absorbed glass mat),
sealed maintenance free
and flooded batteries
Safety timer: 72 hrs.
Complies with US and
international safety
standards (UL/CSA/CE/BC).
AC Power cord length: 6
ft. (180 cm) / 18 AWG (1
mm²) DC Output cord
length: 4.5 ft. (135 cm)
/ 18 AWG (1 mm²) DC
Output accessory length:
1.5 ft. (45 cm)
Availability: In Stock
kr3542.57
Available
-
Create a weatherproof
bulkhead/panel mount SAE
power point with short
cable. Features Perfectly
adapted for Harley
Davidson – Short cable
length for easy
connection to existing HD
SAE cable. Front panel
mount with rear fastener
Connector body fits a Ø
18 mm (23/32”) drilled
hole. Industry standard
durability – Built to
last! Perfect for use in
the harshest
environments, Low
temperature use -40°
C/-40° F – Remains
Flexible! LENGTH: 6″/15
cm CONNECTORS: SAE to SAE
CABLE RATING: 18 AWG
(0.82 mm2) SPT-2W STYLE:
Front mount, rear
fastener, for panel from
1 mm / 0.040″ thickness
Includes in-line rubber
seal for OptiMATE SAE
connector.
Availability: In Stock
kr170.99
Available
-
The perfect adapter to
quickly charge battery
through an auto socket.
Features Fits your auto
socket Includes In-line
rubber seal for heavy
duty SAE connector 10 A
fuse inside the connector
protects against
potential short circuits
Secure locking clips –
vibration proof Low
temperature use -20°
C/-4° F – Remains
Flexible! LENGTH:
20″/50 cm CONNECTORS:
Ø 21 mm AUTO Plug to SAE
CABLE RATING: 16 AWG
(1.31 mm2) SPT-2W STYLE:
Includes in-line rubber
seal for OptiMATE heavy
duty SAE connector
Availability: In Stock
kr149.48
Available
-
Custom designed battery
clips to fit all
batteries. Features Fits
round, square and flat
battery post Easy grip
rubber handles Industry
standard durability –
Built to last! LENGTH:
20″/50 cm CONNECTORS:
Battery clips to SAE
CABLE RATING: 16 AWG
(1.31 mm2) SPT-2W USE:
-40°C/-40°F very low
temperature, cable
remains flexible in
‘below freezing’
temperatures STYLE:
Includes in-line rubber
seal for OptiMATE
heavy-duty SAE connector
Availability: In Stock
kr149.48
Available
-
Split power from your
permanent battery lead,
create 2 fuse protected
SAE outlets. Features
Double your SAE
connections Includes two
seals and one
weatherproof sealing cap
Safe power splitting with
2 x 15 A fuse protection
Perfect for use in the
harshest environments,
Low temperature use -40°
C/-40° F – Remains
Flexible! LENGTH:
20″/50 cm CONNECTORS:
SAE to 2 x SAE CABLE
RATING: 18 AWG (0.82 mm2)
SPT-2W FUSE: 2 x 15 A
(each output) STYLE:
Includes in-line and end
cap rubber seals for
OptiMATE heavy duty SAE
connectors
Availability: In Stock
kr224.76
Available
-
Replacement batteries for
the heated iXS LT glove
Heat ST. Features Set for
1 pair of gloves
Availability: In Stock
kr644.17
Available
-
SAE flashlight with
charging problem
indicator. Confirm if
vehicle charging system
is working or battery is
charged & provide
emergency roadside light,
powered via your
permanent battery lead or
an an optional BIKE /
AUTO socket accessory.
Features Emergency
flashlight that runs off
SAE connection 6 Bright
LED’s – Perfect for
roadside emergencies
Monitor your charging
system, Green indicates
healthy, Red indicates
problem Sealed and
weatherproof – perfect
for outside use Cable
Length – 40″/100 cm
BATTERY CONNECTOR
(INPUT): 2-pin SAE CHARGE
CONNECTOR (OUTPUT): 6
bright LEDs OPERATION: 2
automatic Modes –
Battery charge level
monitor (single LED blink
mode) & 6 LED safety
light GREEN LED
indicates: vehicle charge
voltage is 14 V or higher
RED LED indicates:
battery voltage is less
than 12.3 V CABLE RATING:
SPT-2W 16 AWG (1.32 mm2)
FUSE: No fuse USE: -40°
C/-40° F very low
temperature, remains
flexible at ‘below
freezing’ temperatures
STYLE: Fully enclosed
electronic circuitry with
6 LEDs
Availability: In Stock
kr192.50
Available
-
Weatherproof battery lead
with state of charge
monitor for the 12 V
lead-acid battery in your
parked powersport vehicle
– 24-7 battery status
at a blink of an LED!
Features With M6 / 1/4″
– M8 / 5/16″ ringlets
that perfectly fit your
powersport battery
terminals, and 15 A fuse
that protects the -40° C
rated cable and
electronics – Premium
quality! Sealed monitor
with 4 LEDs indicate
battery state of charge
from full to empty for
12V lead-acid (AGM, GEL
or STD) batteries – LED
corresponding to charge
level blinks every 3
seconds. SAE quick
connect charge port for
charging battery when
needed – with
weatherproof sealing cap
when vehicle is moving!
Displays charge system
status when engine is
running – easy pre-ride
check at a glance to see
if battery is receiving
charge. LENGTH: 24″/60
cm BATTERY CONNECTOR:
1/4″ (M6) / 5/16”
(M8) ringlets CHARGE
CONNECTOR: 2-pin SAE,
protected from dirt and
liquid with rubber
sealing cap and shroud.
OPERATION: 2 automatic
Modes – Battery charge
level monitor (single LED
blink mode) & Charging
system test (arrow mode).
Vehicle storage: 4 LEDs
cover ‘full to empty’
voltage range of all 12 V
batteries, including
higher voltage AGM for
power sport (4th
√√LED ≥ 12.7 V ).
LED matching charge level
blinks every 3 seconds
(long term draw less than
0.2 mA). Vehicle running:
LED arrow mode activates
when charge voltage
reaches ideal charging
voltage, up to minimum
13.5 V (√ green LED) or
ideal range 14 V+ (√√
green LED). CABLE RATING:
18 AWG (0.82 mm2) SPT-2W
FUSE: 15 Amp STYLE: Fully
enclosed electronic
circuitry with 4 LEDs,
SAE charge connector with
rubber sealing cap &
shroud
Availability: In Stock
kr267.78
Available
-
The portable 3300 mA dual
USB charger that fits in
your motorcycle, car,
pick-up truck or boat’s
standard 12 V socket –
Charges your phone and
GPS or camera fast!
Features Connects to
standard Ø 21-22 mm /
7/8″ cigarette / 12 V
power socket – Locking
blade springs mate with
locking slots in socket.
Charges 2 USB devices
with up to 3300 mA
current available to
share, or charge 1 x
USB-C device fast. –
Charge current adapts to
connected device for safe
recharging Creates
weatherproof seal against
inserted USB cable, or
‘rideproof’ cap
protects USB port not in
use – Worry free phone,
camera or GPS charging
in any weather!
Luminescent display –
Locate your USB port
easily at night! CHARGE
CONNECTOR (INPUT): AUTO
Ø 21 mm plug CHARGE
CONNECTOR (OUTPUT): 2x
USB (located directly on
the charger) CHARGING
AMPS: 3300 mA (fast
charge) OPERATION: fully
automatic STYLE: Fully
enclosed electronic
circuitry with blue LED,
unique seal and cap
design for USB sockets,
use any USB cable, seals
when inserted
Availability: In Stock
kr278.53
Available
-
OptiMate 2, the
versatile fully sealed
automatic battery
maintainer for your
motorbike,
classic/modern car or
pickup truck or your RV /
caravan’s 12V battery
– Ultimate maintenance
for starter batteries!
Features The OptiMate 2
smart charger-maintainer
is a cost-effective
solution for long-term
maintenance of 12V
batteries in any vehicle
that is stored indoors or
outdoors Weatherproof and
very easy to use: simply
connect to the battery
and plug it into the
nearest power socket,
the rest is fully
automatic With 0, 8A
constant current OptiMate
2 automatically brings
the battery to full
charge and then switches
to the unique OptiMate
battery-saving
maintenance charge mode
to keep the battery at
100% ready, and at the
same time provides power
to the on-board computer,
display or anti-theft
alarm Recommended for STD
(with removable filler
caps), sealed AGM
(absorbed glass mat) and
sealed gel 12V lead-acid
batteries up to 50Ah
Weighs in at 454 gr. (1
lb) Includes permanent
ringlet connector with
weatherproof cap and a
set of battery clips
Ideal for AGM, GEL & STD
12V batteries from 3 –
96Ah Charging Amps: 0.8A
(constant current)
Charging Volts: nominal:
12V range: 2V – 14.4V
Operation: Fully
automatic Comes with
EU-plug
Availability: In Stock
kr676.43
Available
-
Create a weatherproof
bulkhead/panel mount SAE
power point. Connector
body fits a Ø 1 ″/25
mm drilled hole. Rubber
expander bushing secures
the connector in the
hole. Features Easy mount
– Drill the hole, fit
the socket, tighten the
nut Front panel mount –
Only front access needed
to fasten Connector fits
a Ø 1 ″/25 mm drilled
hole Industry standard
durability – Built to
last! Perfect for use in
the harshest
environments, Low
temperature use -40°
C/-40° F – Remains
Flexible! LENGTH:
12″/30 cm CONNECTORS:
SAE to SAE CABLE RATING:
16 AWG (1.31 mm2) SPT-2W
USE: -40° C/-40° F very
low temperature, cable
remains flexible in
‘below freezing’
temperatures STYLE:
Includes in-line rubber
seal for OptiMate heavy
duty SAE connector
Availability: In Stock
kr235.52
Available
-
The engineers at Deltran
led the way in innovation
and convenience by
introducing the Battery
Tender® 800. Since its
introduction in 2003, it
has been widely accepted
as a solid new addition
to the Battery Tender®
family of charger
products. This version of
the popular charger is
designed specifically for
use on 12 volt Lithium
(LiFePO4) batteries. It
incorporates highly
efficient surface mount
technology electronic
components. The interior
is completely
encapsulated, protected
from shock, vibration,
and moisture by an
electrically insulating,
thermally conductive,
flame retardant,
synthetic epoxy resin
compound. It s tough,
affordable, and a
strong, innovative
battery charging
solution. This charger is
no larger than a standard
computer mouse yet packs
800 millamps of pure
constant current charging
power. Coupled with a
brain (IC chip), the
charger will constantly
monitor, charge, and
then maintain your
battery! Perfect for all
outdoor types of ATV s,
watercraft, motorcycles,
boats, or anywhere
water is a threat.
Features Input: 240V AC
EU-plug Designed to
charge any 12 volt
Lithium (LiFePO4) battery
"Supersmart" technology
Spark-proof Short circuit
protected Reverse
polarity protected Auto
recovery mode for
batteries with very low
voltage Weatherproof
Weight approx 500 gr.
Availability: In Stock
kr634.11
Available
-
The ideal extender for
your garage. Features
Length 6 ft/180 cm Extend
your SAE connection
Industry standard
durability – Built to
last! Includes
weatherproof rubber seal
for heavy duty SAE
connector Low temperature
use -20° C/-4° F –
Remains Flexible! LENGTH:
6 ft/180 cm CONNECTORS:
SAE to SAE CABLE RATING:
18 AWG (0.82 mm2) SPT-2
STYLE: Includes in-line
rubber seal for OptiMATE
heavy duty SAE connector.
Availability: In Stock
kr149.48
Available
-
The fastest professional
battery charger for
LiFeP04/LFP batteries.
Features Charging voltage
12.8 V Charging amps: 9A
(Ampmatic) Adjusts
current to match battery
size and condition Can be
used in temperatures as
low as -20 °C (-4 °F)
Advanced Lithium save
mode will save a battery
from as low as 0, 5V Push
button activated BMS
wake-up mode safely wakes
battery out of sleep mode
or low discharge Smart
interactive maintenance
prevents discharge from
connected circuitry
Global input (100V-240V
50Hz-60Hz),
high-efficiency, fully
sealed Ideal for Lithium
(LiFePO4) 12.8/13.2V
batteries from 2 –
120Ah Charging Amps: 10A
(Ampmatic current)
Charging Volts: nominal:
12.8V range: 0.5V –
14.4V Operation: Fully
automatic Comes with
EU-plug
Availability: In Stock
kr2009.94
Available
-
Battery Tender Ring
Terminal Harness is an
accessory for use with
multiple batteries. It is
equipped with a black
Quick Disconnect plug and
is suitable for use with
12 volt models only. This
ring terminal harness
includes a 3-amp fuse and
is 18 inches in length.
Features 18" (45 cm) cord
adaptor Plugs into all
Deltran Battery Tenders
Convenient for
hard-to-access batteries
Adaptor plug is
compatible with most
heated suits for
motorcycles or
snowmobiles This ring
terminal harness includes
a 7.5 -amp fuse and is 18
inches (45 cm) in length
Availability: In Stock
kr79.34
Available
-
The fastest professional
battery charger for
LiFeP04/LFP batteries.
Features Allows for
selection between 4S (12,
8V) and 5S (16V) charging
Charging amps: 9A
(Ampmatic) Adjusts
current to match battery
size and condition Can be
used in temperatures as
low as -20 °C (-4 °F)
Advanced Lithium save
mode will save a battery
from as low as 0, 5V Push
button activated BMS
wake-up mode safely wakes
battery out of sleep mode
or low discharge Smart
interactive maintenance
prevents discharge from
connected circuitry
Global input (100V-240V
50Hz-60Hz),
high-efficiency, fully
sealed Comes with EU-plug
Availability: In Stock
kr2009.94
Available
-
The rugged Battery
Tender® 12 V, 800 mA
weather resistant battery
charger and maintainer
has all the features of
the best selling Battery
Tender® Junior, in a
mountable water-resistant
package. This 800
milliamp battery charger
is also shock and
vibration resistant,
perfect for all types of
ATVs, personal
watercraft, motorcycles,
boats, or other
recreational vehicles
that may be exposed to
the elements. Smaller
than a computer mouse,
but tough enough to keep
your ride ready for its
next adventure. The
Battery Tender® 12 V,
800 mA weather resistant
battery charger is
designed for all
lead-acid and flooded or
sealed maintenance free
batteries (AGM and gel
cell). Features 12 V,
800 mA weather resistant
battery charger and
maintainer Input: 240V AC
EU-plug Alligator clip
connector Ring terminal
harness connector
Designed to charge any 12
volt standard battery
"Supersmart" technology
Spark-proof Short circuit
protected Reverse
polarity protected Auto
recovery mode for
batteries with very low
voltage Weatherproof
Weight approx 500 gr.
Availability: In Stock
kr634.11
Available
-
Battery Tender LCD
digital voltage
indicator, designed for
use on 12v batteries.
Features LCD displays
battery voltage when the
button is pressed or when
initially plugged in
Display voltage range is
3 to 16 V, resolution is
+/- 0.1 V The red LED
flashes when voltage is
low Indicators Green:
Battery charged (Greater
than 12.0 V) Yellow:
Battery is low (11.6 to
12.0 V) Red: Battery is
discharged (Less than
11.6 V)
Availability: In Stock
kr211.54
Available
-
Battery Tender extension
cable. Features 12.5 ft
(380 cm) long Quick
Connect 12 V models only
Black quick connects
Availability: In Stock
kr137.44
Available
-
The 2 Bank Battery
Tender® Charging Station
is two encased 1.25 amp
battery chargers designed
to fully charge a battery
and maintain it at proper
storage voltage without
the damaging effects
caused by trickle
chargers. Features Input:
240 VAC, EU-plug 2
independent charging
stations 12 volts / 1.25
amps per station
Extremely lightweight,
less than 3 lbs. (1375
gr.) Microprocessor
controlled constant
current charging Reverse
polarity protected Spark
proof Perfect for all AGM
(absorbed glass mat),
sealed maintenance free
and flooded batteries
Safety timer: 72 hrs.
Complies with US and
international safety
standards (UL/CSA/CE/BC).
AC Power cord length: 6
ft. (180 cm) / 18 AWG (1
mm²) DC Output cord
length: 4.5 ft. (135 cm)
/ 18 AWG (1 mm²) DC
Output accessory length:
1.5 ft. (45 cm)
Availability: In Stock
kr1765.78
Available
-
Create your own AUTO
socket from SAE – for
an automotive plug,
style USB charger or GPS
adapter. Features
Internal locking slots
securely keep your
accessory in place whilst
riding Weatherproof –
Auto socket cap and SAE
rubber seal Industry
standard durability –
Built to last! Perfect
for use in the harshest
environments, Low
temperature use -40°
C/-40° F – Remains
Flexible! LENGTH:
20″/50 cm CONNECTORS:
SAE to Ø 21 mm AUTO
socket CABLE RATING: 16
AWG (1.31 mm2) SPT-2W
STYLE: Includes in-line
rubber seal for OptiMATE
heavy-duty SAE connector.
Availability: In Stock
kr192.50
Available
-
Universal adapter for car
cigarette lighter cable
(diameter 21mm) and
motorcycle with mini
socket (diameter 12mm).
Availability: In Stock
kr322.29 SEK
Available
-
Rechargeable lithium
battery. Replacement for
WarmMe socks, available
in standard 2200 mAh
version (7 hours
duration) with
temperature selection
button with 3 levels.
Availability: In Stock
kr386.07
Available
-
Wall charger EU Plug
(single plug).
Replacement for WarmMe
heated clothing (vest,
gloves and socks).
Availability: In Stock
kr310.79
Available
-
Rechargeable lithium
battery. Replacement for
heated vest and
motorcycle and outdoor
gloves, 3000mAh version
(duration 7 hours).
Availability: In Stock
kr400.35 SEK
Available
-
Cable with 12V car
cigarette lighter socket
(diameter 21 mm) for
direct power supply
WarmMe Capit heated
clothing excluding the
use of batteries. Can
also be used to recharge
batteries from 12V
cigarette lighter socket.
If used with heated
gloves it must be
combined with the
splitter cable (sold
seperately).
Availability: In Stock
kr310.79
Available
-
Y-cable for connection to
car or motorcycle power
supply for continuous
power supply of gloves
for long journeys. Length
1.3 m. On-board voltage
charging cable
additionally required.
Availability: In Stock
kr188.47 SEK
Available
-
The Battery Tender® 3
AMP battery charger will
fully recharge and then
maintain a battery at its
proper storage voltage
without the damaging
effects caused by trickle
chargers. A higher output
(3 amps) than the
original Battery Tender®
Plus for a quicker
recharge on Automotive,
Marine, and Power Sport
batteries combined with
the automatic switch to
maintenance mode makes
this unit very versatile.
It is an ideal charger
for everyday charging use
or long-term storage and
maintenance. Ideal for
AGM, Flooded, and Gel
batteries. Features
Input: 240 VAC / 60 Hz
Comes with EU-plug
Output: 6 V or 12 V / 3
amps Reverse polarity
protection to ensure user
safety. Spark-proof Short
circuit protected
Complete 4-step charging
program (Initialization,
Bulk Charge, Absorption
Mode, Float Mode)
Perfect for all
lead-acid, flooded or
sealed maintenance free
batteries (AGM and gel
cell) Safety timer: 33
hours
Availability: In Stock
kr1048.49
Available
-
The fully automatic
Battery Tender® 1.25 AMP
is a top-of-the-line 12 V
or 6 V switchable battery
charger, 12 V
Lithium(LiFePO4) perfect
for automotive,
motorcycle, and marine
applications. With almost
double the power of the
Battery Tender® Junior,
this charger is versatile
and powerful. Equipped
with a simplified 4-step
automatic charge process,
all Battery Tender®
battery chargers
automatically switch from
full charge to float
charge mode. Reverse
hook-up protection makes
connecting your charger
safe and easy to do. LED
light indicators make
selecting your charge
mode simple. Features 12
V or 6 V switchable /
1.25 AMPs Comes with
EU-plug Selectable for
AGM/Standard/GEL or
Lithium (LiFePO4) (12V
only for Lithium) ISM™
(Infinite Sequential
Monitoring) of the fully
automatic 4-step charge
process (qualification,
bulk charge, absorption,
float) Microprocessor
controlled Spark-proof
even when output leads
touch Reverse polarity
protection - no charge or
battery damage State of
charge LED indicators
Includes rings & clips
Weight: 3.15 lbs
Dimensions: 6.8” x
3.68” x 1.96”
(charger only) Lead acid
safety timer: 25 hrs.
Lithium safety timer: 15
hrs.
Availability: In Stock
kr838.61
Available
-
Split USB charge power
and conveniently charge 2
x USB devices from a
single USB charger or
port! Features Split up
to 4200 mA of USB
charging power – Fast
charging possible to two
devices! Weatherproof USB
charge ports easily
zip-tie to handlebar,
strut or even brake /
clutch cable – Create
charge ports anywhere on
your powersport vehicle.
Mates with OptiMate USB
O-100, O-105, O-115 or
O-108 to create
weatherproof seal –
Charge anywhere when
combined with OptiMate
USB! LENGTH: 12″ / 30
cm CHARGE CONNECTOR
(INPUT): 1x USB CHARGE
CONNECTOR (OUTPUT): 2x
USB OPERATION: Each
output delivers 4A max.
USE: low temperature,
remains flexible at
‘below freezing’
temperatures STYLE:
In-line seals for
OptiMate USB connectors,
unique seal and cap
design for USB socket
Availability: In Stock
kr181.74
Available
-
OptiMate 5 Start/Stop,
the perfect power charger
& maintainer for your
car, pick-up truck and
your Vtwin motorcycle or
4 wheeler (ATV/ Side by
Side) – 24-7 battery
care for medium to large
12V batteries! Features
Ideal for start/ stop and
deep cycle applications
Low-volt start of 2V and
one-step desulphation
recovery Perfect for
months-long maintenance
of any size 12V lead-acid
battery from 15Ah-192Ah
Constant 4A charging
current Functions in cold
temperatures down to -20
°C (-4 °F) Global
(100V-240V, 50Hz-60Hz)
input, fully sealed
Weatherproof case with
wall mounts,
weatherproof battery lead
and standard battery clip
set included Automatic
shut-down if battery
short circuits or
disconnects Ideal for
AGM, GEL & STD 12V
batteries from 15 –
192Ah. Charging Amps: 4A
(Constant current,
temperature compensated)
Charging Volts: nominal:
12V range: 2V – 14.4V
Operation: Fully
automatic Comes with
EU-plug
Availability: In Stock
kr1020.56
Available
-
The adapter – extender
cable from DIN ø 12 mm
BIKE socket into SAE –
120 cm/48 inhc. Features
The DIN / ISO 4165
standard OptiMate BIKE
plug fits 12V sockets of
BMW, Triumph & Ducati
Multistrada motorcycles
and some marine and
agricultural equipment.
180° straight connection
Includes weatherproof
sealing DIN cap and
in-line SAE seal Perfect
for use in the harshest
environments, Low
temperature use -40°
C/-40° F – Remains
Flexible! LENGTH:
48″/120 cm CONNECTORS:
Ø 12 mm DIN straight
plug to SAE CABLE RATING:
18 AWG (0.82 mm2) SPT-2W
STYLE: Includes rubber
cap to protect BIKE
connector tip, in-line
rubber seal for OptiMATE
SAE connector
Availability: In Stock
kr278.53
Available
-
OptiMate 4 CAN-bus
edition, the most
advanced 12V battery
saving charger for your
high performance or
touring BMW motorcycle
– Most popular BMW
motorcycle charger
world-wide! Features
Ultimate all-in-one tool
for 12V battery care at
home, that diagnoses,
recovers, charges,
tests and optimally
maintains, automatically
Charge the battery via
the 12V port on your
CANbus equipped bike
Includes 12V DIN
connector cable (O9)
Automatic keyless
activation will charge
and maintain the battery
until it is disconnected
OptiMate 4 CANbus edition
includes low voltage
Pulse recovery for even
more effective recovery
of badly neglected,
sulphated batteries
Weatherproof enclosure
Built-in mounting lugs
and improved energy
efficiency extends
battery life by up to
400% Ideal for AGM, GEL
& STD 12V batteries from
3 – 50Ah Charging Amps:
1A (constant current)
Charging Volts: nominal:
12V range: 0.5V – 14.4V
Operation: Fully
automatic Comes with
EU-plug
Availability: In Stock
kr805.48
Available
-
Quickly re-charge and
maintain your battery
with The Battery Tender®
5 Amp charger. Fully
automatic and easy to
use. With a 4-Step Fully
Automatic Charging
(Initialization, Bulk,
Absorption, Float)
sequence this charger
switches to a float /
maintenance voltage after
the battery has reached
100%. Perfect for all
lead-acid, flooded or
sealed maintenance free
batteries (AGM and Gel
Cell) which is versatile
for a variety of
applications. It is
completely safe and
includes a 72 hour timer
to prevent further damage
to marginal batteries.
Features Input: 240 V AC
/ 60 Hz Comes with
EU-plug Output: 12 Volts
DC / 5 Amps 4-Step Fully
Automatic Charging
(Initialization, Bulk,
Absorption, Float)
Automatically switches to
float / maintenance
voltage after fully
charging the battery
Perfect for all
lead-acid, flooded or
sealed maintenance free
batteries (AGM and Gel
Cell) Spark-proof Short
circuit protected Reverse
polarity protected Safety
timer: 72 hrs
Availability: In Stock
kr1395.30
Available
-
Create an ‘easy
access’ permanent
connection to the battery
of your vehicle. Features
With adjustable M6 /
1/4″ – M8 / 5/16”
ringlets that fit all
powersport and most
automotive battery
terminals – premium
quality! Custom designed,
SAE connector with snug
weatherproof seal and cap
– Keeps out dirt and
water! Zip tie slits
allow easy & secure
fastening to vehicle –
SAE connector can be
positioned out of harms
way. Perfect for use in
the harshest
environments, Low
temperature use -40° C /
-40° F – Remains
Flexible! Inline 15 Amp
fuse protects against
short circuit or
over-current. LENGTH:
20″/50 cm CONNECTORS:
1/4″ (M6) / 5/16”
(M8) Ringlets to SAE
CABLE RATING: 18 AWG /
0.82 mm2 SPT-2W STYLE:
Rubber sealing cap &
shroud for OptiMate heavy
duty SAE connector
Availability: In Stock
kr160.24
Available
-
Weatherproof DIN bike
socket. Features Fits
BMW, Triumph, Victory,
selected Honda Goldwing
motorcycles and John
Deere ATV’s Two pin
connector with metal
sealing nut With secured
weatherproof rubber
sealing plug Strong
locking connection to
devices Drainage hole
LENGTH: 11/16” / 18 mm
Hole size CONNECTORS:
¼’/6 mm Spade
connector to Ø 12 mm DIN
Socket USE: -40° C/-40°
F very low temperature
use STYLE: Premium BIKE
socket designed by
TecMate
Availability: In Stock
kr149.48
Denmark