Split power from your permanent battery lead, create 2 fuse protected SAE outlets. Features Double your SAE connections



...

Create your own AUTO socket from SAE – for an automotive plug, style USB (Universal Serial Bus) charger or GPS adapter. Features Internal locking slots securely keep your accessory in place whilst riding Weatherproof – Auto socket cap & SAE rubber seal Industry standard durability – Built to last! Perfect for use in the harshest environments, Low temperature use -40° C/-40° F – Remains Flexible! LENGTH: 20″/50 cm CONNECTORS: SAE to Ø 21 mm AUTO socket CABLE RATING: 16 AWG (1.31 mm 2) SPT-2W STYLE:

Includes:: in-line rubber seal for Opti MATE heavy-duty SAE connector.

...

Weatherproof DIN bike socket. Features Fits BMW, Triumph, Victory, selected Honda Goldwing motorcycles & John Deere ATV’s Two pin connector with metal sealing nut With secured weatherproof rubber sealing plug Strong locking connection to devices Drainage hole LENGTH: 11/16” / 18 mm Hole size CONNECTORS: ¼’/6 mm Spade connector to Ø 12 mm DIN Socket USE: -40° C/-40° F very low temperature use STYLE: Premium BIKE socket designed by Tec Mate ...

The adapter – extender cable from DIN ø 12 mm BIKE socket into SAE – 120 cm/48 inhc. Features The DIN / ISO 4165 standard Opti Mate BIKE plug fits 12V sockets of BMW, Triumph & Ducati Multistrada motorcycles & some marine & agricultural equipment. 180° straight connection

Includes:: weatherproof sealing DIN cap & in-line SAE seal Perfect for use in the harshest environments, Low temperature use -40° C/-40° F – Remains Flexible! LENGTH: 48″/120 cm CONNECTORS: Ø 12 mm DIN straight plug to SAE CABLE RATING: 18 AWG (0.82 mm 2) SPT-2W STYLE:

Includes:: rubber cap to protect BIKE connector tip, in-line rubber seal for Opti MATE SAE connector



...

The portable 3300 m A dual USB (Universal Serial Bus) charger that fits in your motorcycle, car, pick-up truck or boat’s standard 12 V socket – Charges your phone & GPS or camera fast! Features Connects to standard Ø 21-22 mm / 7/8″ cigarette / 12 V power socket – Locking blade springs mate with locking slots in socket. Charges 2 USB (Universal Serial Bus) devices with up to 3300 m A current available to share, or charge 1 x USB (Universal Serial Bus)-C device fast. – Charge current adapts to connected device for safe recharging Creates weatherproof seal against inserted USB (Universal Serial Bus) cable, or ‘rideproof’ cap protects USB (Universal Serial Bus) port not in use – Worry free phone, camera or GPS charging in any weather! Luminescent display – Locate your USB (Universal Serial Bus) port easily at night! CHARGE CONNECTOR (INPUT): AUTO Ø 21 mm plug CHARGE CONNECTOR (OUTPUT): 2x USB (Universal Serial Bus) (located directly on the charger) CHARGING AMPS: 3300 m A (fast charge) OPERATION: fully automatic STYLE: Fully enclosed electronic circuitry with blue LED, unique seal & cap design for USB (Universal Serial Bus) sockets, use any USB (Universal Serial Bus) cable, seals when inserted ...

The perfect adapter to quickly charge battery through an auto socket. Features Fits your auto socket

Includes::

...

SAE flashlight with charging problem indicator. Confirm if vehicle charging system is working or battery is charged & provide emergency roadside light, powered via your permanent battery lead or an an optional BIKE / AUTO socket accessory. Features Emergency flashlight that runs off SAE connection 6 Bright LED’s – Perfect for roadside emergencies Monitor your charging system, Green indicates healthy, Red indicates problem Sealed & weatherproof – perfect for outside use Cable Length – 40″/100 cm BATTERY CONNECTOR (INPUT): 2-pin SAE CHARGE CONNECTOR (OUTPUT): 6 bright LEDs OPERATION: 2 automatic Modes – Battery charge level monitor (single LED blink mode) & 6 LED safety light GREEN LED indicates: vehicle charge voltage is 14 V or higher RED LED indicates: battery voltage is less than 12.3 V CABLE RATING: SPT-2W 16 AWG (1.32 mm 2) FUSE: No fuse USE: -40° C/-40° F very low temperature, remains flexible at ‘below freezing’ temperatures STYLE: Fully enclosed electronic circuitry with 6 LEDs ...

Weatherproof battery lead with state of charge monitor for the 12 V lead-acid battery in your parked powersport vehicle – 24-7 battery status at a blink of an LED! Features With M6 / 1/4″ – M8 / 5/16″ ringlets that perfectly fit your powersport battery terminals, & 15 A fuse that protects the -40° C rated cable & electronics – Premium quality! Sealed monitor with 4 LEDs indicate battery state of charge from full to empty for 12V lead-acid (AGM, GEL or STD) batteries – LED corresponding to charge level blinks every 3 seconds. SAE quick connect charge port for charging battery when needed – with weatherproof sealing cap when vehicle is moving! Displays charge system status when engine is running – easy pre-ride check at a glance to see if battery is receiving charge. LENGTH: 24″/60 cm BATTERY CONNECTOR: 1/4″ (M6) / 5/16” (M8) ringlets CHARGE CONNECTOR: 2-pin SAE, protected from dirt & liquid with rubber sealing cap & shroud. OPERATION: 2 automatic Modes – Battery charge level monitor (single LED blink mode) & Charging system test (arrow mode). Vehicle storage: 4 LEDs cover ‘full to empty’ voltage range of all 12 V batteries, including higher voltage AGM for power sport (4th √√LED ≥ 12.7 V ). LED matching charge level blinks every 3 seconds (long term draw less than 0.2 m A). Vehicle running: LED arrow mode activates when charge voltage reaches ideal charging voltage, up to minimum 13.5 V (√ green LED) or ideal range 14 V+ (√√ green LED). CABLE RATING: 18 AWG (0.82 mm 2) SPT-2W FUSE: 15 Amp STYLE: Fully enclosed electronic circuitry with 4 LEDs, SAE charge connector with rubber sealing cap & shroud ...

The longest extender for power sport vehicles. Features Length 15 ft/460 cm Extend your SAE connection Industry standard durability – Built to last!

Includes:: weatherproof rubber seal for heavy-duty SAE connector Low temperature use -20° C/-4° F – Remains Flexible! CONNECTORS: SAE to SAE CABLE RATING: 18 AWG (0.82 mm 2) SPT-2 STYLE:

Includes:: in-line rubber seal for Opti MATE heavy duty SAE connector



...

Fused custom designed battery clips to fit all batteries. Features Fits round, square & flat battery post Easy grip rubber handles 15 A fuse protect from power surge & short circuiting Industry standard durability – Built to last! Perfect for use in the harshest environments, Low temperature use -40° C/-40° F – Remains Flexible! LENGTH: 20″/50 cm CONNECTORS: Battery clips to SAE CABLE RATING: 16 AWG (1.31 mm 2) SPT-2W FUSE: 15 Amp STYLE:

Includes:: in-line rubber seal for Opti MATE heavy duty SAE connector

...