This is X-lite’s exclusive high-carbon content version of the new flip up helmet. It is characterised by an elegant & dynamic design, a striking appearance & an ample range of technical features, some of which are highly innovative. Carbon-rich construction, three outer shell sizes, double P/J homologation, ultrawide visor, VPS sunscreen (adjustable in various positions & fitted with the automatic retraction system), rotation of the chin guard with elliptical trajectory, exclusive double action chin guard opening mechanism, double lever Microlock² retention system with micrometric adjustment, Carbon Fitting Racing Experience inner comfort padding (with an innovative net construction), exclusive Liner Positioning Control (LPC) system & set-up for the new generation N-Com communication system make the X-1005 ULTRA CARBON the most exclusive flip up helmet for the most demanding of motorbike tourists. Features Ultra Carbon Fiber-Shell of multi-axial hybrid fabrics (carbon-glass & aramid-glass) P/J homologation Pinlock-ready anti-scratch visor (Pinlock FSB 4L) Quick release visor system Sunscreen UV-400 protection Microlock retention system Dual control lift Wind protector Breath deflector N-COM ready Homologized UN/ECE 22-05 P/J Homologation The helmet can be used either with the chin guard open (J configuration) or closed (P configuration), as the protective chin guard has passed the homologation tests required by UN/ECE regulations for full-face helmets. Ultrawide visor The large surface of the S/R (Scratch Resistant) visor makes it possible to have a broader view, also lateral, thus highly increasing active safety. Pinlock® Fog-resistant inner visor Thanks to the patented adjusting system, the stretch of the Pinlock® inner visor can be adjusted, acting from the exterior of the visor, without the necessity of removing. The Full Silicone Border (FSB), adopted under license from Pinlock®, allows first of all for an increase in the size of the air chamber located between the helmet exterior & interior, thus further reducing the risk of fogging, secondly, it reduces the risk of scratches to the visor. VPS sunscreen Moulded out of LEXAN™*, it is S/R (Scratch Resistant) & F/R (Fog Resistant) treated & offers UV protection up to 400 nanometres. It can be easily removed for maintenance & cleaning & is fully-adjustable. The activation system (patented) allows for the automatic retraction of the sunscreen in a standby position, thus simplifying emergency maneuvers required to quickly obtain the maximum level of visibility offered by the visor. Ventilation system The exclusive complete & extremely efficient ventilation system uses three different systems of air-flow management via a front intake, two upper intakes & two rear extractors which allow optimal air circulation inside the helmet. An opening located in the lower part of the visor further contributes to ventilation around the mouth area, limiting fogging & the formation of condensation on the visor itself when the helmet is used in full face configuration. Chin guard rotation with elliptical trajectory The chin guard rotation movement with elliptical trajectory makes it possible to keep the total size of the helmet’s front section to a minimum, when the chin guard is open. The “sail” effect is consequently highly reduced & riding comfort is still guaranteed, even when the chin guard is lifted. dual action (patented) Exclusive dual action chin guard opening system. Positioned in the center of the chin guard, it allows for easy, one-handed opening. The dual action opening mechanism reduces the risk of accidental opening: the chin guard can be opened only operating the first release lever (or safety lock) & then activating the second lever. LPC
- Liner Positioning Control This system, patent pending, allows for the regulating of the position of the liner. This permits the positioning of the same-sized helmet to be adjusted for different heads, consequently adapting to various requirements & head shapes. Moulded lining for the inner cheek pads in Polystyrene The helmet has a moulded lining for the internal cheek pads in polystyrene which allows for a more precise fitting of the fabric inner cheek pads. This lining, which gives the product a quality finish, also provides the housing for the earphones of the N-Com communication system. “CARBON FITTING" Comfort inner padding with innovative net construction The comfort inner padding is made with active carbon filaments, a thermo-regulating, antistatic & dissipative element. The liner, with an innovative net construction, aids the movement of air around the upper part of the head which thus stays cool & dry. Eyewear adaptive This system has been designed for the comfort of eyeglass wearers. In a quick & easy way, it allows to obtain a space in the cheek pads for the glasses temples. It is reversible, so the cheek pads can be returned to the initial configuration. To further facilitate the washing, the cheek pads are equipped with expanded foam inner padding which can be taken out from the fabric covering. Integrated chin straps Removable & washable, they are integrated in the cheek pads, favouring the helmet’s fit as well as its wearability & soundproofing. Microlock² (patented) Availability according to the product version. It is a patented double lever retention system with micrometric adjustment. It consists of a thermoplastic ergonomic opening lever, & of a second aluminium toothed & holding lever. The toothed lever releases the micrometric strip, thus the chin strap can only be open with a very broad rotation of the opening lever. This device minimizes the possibility of unintentional opening of the retention system. Single-Block cheek pads The internal padding in expanded foam for the cheek pads has been designed in order to provide superior even pressure & consistent performance over time compared to traditional padding. It can also be removed from its fabric coverings in order to make washing of the latter easier. Set up for N-COM communication system The helmet is ready & approved with the N-Com communication system installed. The system allowing for the installation & the compatible N-Com product itself, have both been designed with the aim of facilitating the assembly of the system N-COM compatibility B902 X series
- B601 X series SHARP – THE HELMET SAFETY SCHEME Nolangroup proudly underlines that all of its products
- Nolan, X-lite & Grex
- tested by SHARP, the prominent independent test system run by the British Government, have obtained at least four stars. Furthermore, all “flip-up” helmets have received the highest possible rating in terms of chin guard latch reliability. This means that, for each of the products tested by SHARP, the chin guard remains completely closed during each of the 30 impacts. Note Please be aware, as long as nothing else is written in the item description: All helmets will be delivered only with the ECE certification by default all helmets that have a visor will be delivered with a clear visor, even if it is shown differently.



...

This is X-lite’s exclusive high-carbon content version of the new flip up helmet. It is characterised by an elegant & dynamic design, a striking appearance & an ample range of technical features, some of which are highly innovative. Carbon-rich construction, three outer shell sizes, double P/J homologation, ultrawide visor, VPS sunscreen (adjustable in various positions & fitted with the automatic retraction system), rotation of the chin guard with elliptical trajectory, exclusive double action chin guard opening mechanism, double lever Microlock² retention system with micrometric adjustment, Carbon Fitting Racing Experience inner comfort padding (with an innovative net construction), exclusive Liner Positioning Control (LPC) system & set-up for the new generation N-Com communication system make the X-1005 ULTRA CARBON the most exclusive flip up helmet for the most demanding of motorbike tourists. Features Ultra Carbon Fiber-Shell of multi-axial hybrid fabrics (carbon-glass & aramid-glass) P/J homologation Pinlock-ready anti-scratch visor (Pinlock FSB 4L) Quick release visor system Sunscreen UV-400 protection Microlock retention system Dual control lift Wind protector Breath deflector N-COM ready Homologized UN/ECE 22-05 P/J Homologation The helmet can be used either with the chin guard open (J configuration) or closed (P configuration), as the protective chin guard has passed the homologation tests required by UN/ECE regulations for full-face helmets. Ultrawide visor The large surface of the S/R (Scratch Resistant) visor makes it possible to have a broader view, also lateral, thus highly increasing active safety. Pinlock® Fog-resistant inner visor Thanks to the patented adjusting system, the stretch of the Pinlock® inner visor can be adjusted, acting from the exterior of the visor, without the necessity of removing. The Full Silicone Border (FSB), adopted under license from Pinlock®, allows first of all for an increase in the size of the air chamber located between the helmet exterior & interior, thus further reducing the risk of fogging, secondly, it reduces the risk of scratches to the visor. VPS sunscreen Moulded out of LEXAN™*, it is S/R (Scratch Resistant) & F/R (Fog Resistant) treated & offers UV protection up to 400 nanometres. It can be easily removed for maintenance & cleaning & is fully-adjustable. The activation system (patented) allows for the automatic retraction of the sunscreen in a standby position, thus simplifying emergency maneuvers required to quickly obtain the maximum level of visibility offered by the visor. Ventilation system The exclusive complete & extremely efficient ventilation system uses three different systems of air-flow management via a front intake, two upper intakes & two rear extractors which allow optimal air circulation inside the helmet. An opening located in the lower part of the visor further contributes to ventilation around the mouth area, limiting fogging & the formation of condensation on the visor itself when the helmet is used in full face configuration. Chin guard rotation with elliptical trajectory The chin guard rotation movement with elliptical trajectory makes it possible to keep the total size of the helmet’s front section to a minimum, when the chin guard is open. The “sail” effect is consequently highly reduced & riding comfort is still guaranteed, even when the chin guard is lifted. dual action (patented) Exclusive dual action chin guard opening system. Positioned in the center of the chin guard, it allows for easy, one-handed opening. The dual action opening mechanism reduces the risk of accidental opening: the chin guard can be opened only operating the first release lever (or safety lock) & then activating the second lever. LPC
- Liner Positioning Control This system, patent pending, allows for the regulating of the position of the liner. This permits the positioning of the same-sized helmet to be adjusted for different heads, consequently adapting to various requirements & head shapes. Moulded lining for the inner cheek pads in Polystyrene The helmet has a moulded lining for the internal cheek pads in polystyrene which allows for a more precise fitting of the fabric inner cheek pads. This lining, which gives the product a quality finish, also provides the housing for the earphones of the N-Com communication system. “CARBON FITTING" Comfort inner padding with innovative net construction The comfort inner padding is made with active carbon filaments, a thermo-regulating, antistatic & dissipative element. The liner, with an innovative net construction, aids the movement of air around the upper part of the head which thus stays cool & dry. Eyewear adaptive This system has been designed for the comfort of eyeglass wearers. In a quick & easy way, it allows to obtain a space in the cheek pads for the glasses temples. It is reversible, so the cheek pads can be returned to the initial configuration. To further facilitate the washing, the cheek pads are equipped with expanded foam inner padding which can be taken out from the fabric covering. Integrated chin straps Removable & washable, they are integrated in the cheek pads, favouring the helmet’s fit as well as its wearability & soundproofing. Microlock² (patented) Availability according to the product version. It is a patented double lever retention system with micrometric adjustment. It consists of a thermoplastic ergonomic opening lever, & of a second aluminium toothed & holding lever. The toothed lever releases the micrometric strip, thus the chin strap can only be open with a very broad rotation of the opening lever. This device minimizes the possibility of unintentional opening of the retention system. Single-Block cheek pads The internal padding in expanded foam for the cheek pads has been designed in order to provide superior even pressure & consistent performance over time compared to traditional padding. It can also be removed from its fabric coverings in order to make washing of the latter easier. Set up for N-COM communication system The helmet is ready & approved with the N-Com communication system installed. The system allowing for the installation & the compatible N-Com product itself, have both been designed with the aim of facilitating the assembly of the system N-COM compatibility B902 X series
- B601 X series SHARP – THE HELMET SAFETY SCHEME Nolangroup proudly underlines that all of its products
- Nolan, X-lite & Grex
- tested by SHARP, the prominent independent test system run by the British Government, have obtained at least four stars. Furthermore, all “flip-up” helmets have received the highest possible rating in terms of chin guard latch reliability. This means that, for each of the products tested by SHARP, the chin guard remains completely closed during each of the 30 impacts. Note Please be aware, as long as nothing else is written in the item description: All helmets will be delivered only with the ECE certification by default, even if it is shown differently. all helmets that have a visor will be delivered with a clear visor, even if it is shown differently.



...

This is X-lite’s exclusive high-carbon content version of the new flip up helmet. It is characterised by an elegant & dynamic design, a striking appearance & an ample range of technical features, some of which are highly innovative. Carbon-rich construction, three outer shell sizes, double P/J homologation, ultrawide visor, VPS sunscreen (adjustable in various positions & fitted with the automatic retraction system), rotation of the chin guard with elliptical trajectory, exclusive double action chin guard opening mechanism, double lever Microlock² retention system with micrometric adjustment, Carbon Fitting Racing Experience inner comfort padding (with an innovative net construction), exclusive Liner Positioning Control (LPC) system & set-up for the new generation N-Com communication system make the X-1005 ULTRA CARBON the most exclusive flip up helmet for the most demanding of motorbike tourists. Features Ultra Carbon Fiber-Shell of multi-axial hybrid fabrics (carbon-glass & aramid-glass) P/J homologation Pinlock-ready anti-scratch visor (Pinlock FSB 4L) Quick release visor system Sunscreen UV-400 protection Microlock retention system Dual control lift Wind protector Breath deflector N-COM ready Homologized UN/ECE 22-05 P/J Homologation The helmet can be used either with the chin guard open (J configuration) or closed (P configuration), as the protective chin guard has passed the homologation tests required by UN/ECE regulations for full-face helmets. Ultrawide visor The large surface of the S/R (Scratch Resistant) visor makes it possible to have a broader view, also lateral, thus highly increasing active safety. Pinlock® Fog-resistant inner visor Thanks to the patented adjusting system, the stretch of the Pinlock® inner visor can be adjusted, acting from the exterior of the visor, without the necessity of removing. The Full Silicone Border (FSB), adopted under license from Pinlock®, allows first of all for an increase in the size of the air chamber located between the helmet exterior & interior, thus further reducing the risk of fogging, secondly, it reduces the risk of scratches to the visor. VPS sunscreen Moulded out of LEXAN™*, it is S/R (Scratch Resistant) & F/R (Fog Resistant) treated & offers UV protection up to 400 nanometres. It can be easily removed for maintenance & cleaning & is fully-adjustable. The activation system (patented) allows for the automatic retraction of the sunscreen in a standby position, thus simplifying emergency maneuvers required to quickly obtain the maximum level of visibility offered by the visor. Ventilation system The exclusive complete & extremely efficient ventilation system uses three different systems of air-flow management via a front intake, two upper intakes & two rear extractors which allow optimal air circulation inside the helmet. An opening located in the lower part of the visor further contributes to ventilation around the mouth area, limiting fogging & the formation of condensation on the visor itself when the helmet is used in full face configuration. Chin guard rotation with elliptical trajectory The chin guard rotation movement with elliptical trajectory makes it possible to keep the total size of the helmet’s front section to a minimum, when the chin guard is open. The “sail” effect is consequently highly reduced & riding comfort is still guaranteed, even when the chin guard is lifted. dual action (patented) Exclusive dual action chin guard opening system. Positioned in the center of the chin guard, it allows for easy, one-handed opening. The dual action opening mechanism reduces the risk of accidental opening: the chin guard can be opened only operating the first release lever (or safety lock) & then activating the second lever. LPC
- Liner Positioning Control This system, patent pending, allows for the regulating of the position of the liner. This permits the positioning of the same-sized helmet to be adjusted for different heads, consequently adapting to various requirements & head shapes. Moulded lining for the inner cheek pads in Polystyrene The helmet has a moulded lining for the internal cheek pads in polystyrene which allows for a more precise fitting of the fabric inner cheek pads. This lining, which gives the product a quality finish, also provides the housing for the earphones of the N-Com communication system. “CARBON FITTING" Comfort inner padding with innovative net construction The comfort inner padding is made with active carbon filaments, a thermo-regulating, antistatic & dissipative element. The liner, with an innovative net construction, aids the movement of air around the upper part of the head which thus stays cool & dry. Eyewear adaptive This system has been designed for the comfort of eyeglass wearers. In a quick & easy way, it allows to obtain a space in the cheek pads for the glasses temples. It is reversible, so the cheek pads can be returned to the initial configuration. To further facilitate the washing, the cheek pads are equipped with expanded foam inner padding which can be taken out from the fabric covering. Integrated chin straps Removable & washable, they are integrated in the cheek pads, favouring the helmet’s fit as well as its wearability & soundproofing. Microlock² (patented) Availability according to the product version. It is a patented double lever retention system with micrometric adjustment. It consists of a thermoplastic ergonomic opening lever, & of a second aluminium toothed & holding lever. The toothed lever releases the micrometric strip, thus the chin strap can only be open with a very broad rotation of the opening lever. This device minimizes the possibility of unintentional opening of the retention system. Single-Block cheek pads The internal padding in expanded foam for the cheek pads has been designed in order to provide superior even pressure & consistent performance over time compared to traditional padding. It can also be removed from its fabric coverings in order to make washing of the latter easier. Set up for N-COM communication system The helmet is ready & approved with the N-Com communication system installed. The system allowing for the installation & the compatible N-Com product itself, have both been designed with the aim of facilitating the assembly of the system N-COM compatibility B902 X series
- B601 X series SHARP – THE HELMET SAFETY SCHEME Nolangroup proudly underlines that all of its products
- Nolan, X-lite & Grex
- tested by SHARP, the prominent independent test system run by the British Government, have obtained at least four stars. Furthermore, all “flip-up” helmets have received the highest possible rating in terms of chin guard latch reliability. This means that, for each of the products tested by SHARP, the chin guard remains completely closed during each of the 30 impacts. Note Please be aware, as long as nothing else is written in the item description: All helmets will be delivered only with the ECE certification by default, even if it is shown differently. all helmets that have a visor will be delivered with a clear visor, even if it is shown differently.



...

A travel companion with elegant & dynamic design, equipped with the most advanced technology. The high carbon version, the X-1005 Ultra Carbon, will be the most exclusive & popular model for the most demanding motorcycle tourists. Features Certified according to UN/ECE 22-05 The helmet can be used in open (J) or closed (P) configuration dual action chin guard opening system Chin guard rotation with elliptical trajectory Microlock chin strap closure Scratch resistant, ultrawide visor Pinlock® fog resistant inner visor (inclusive) Quick release shield system Adjustable Vision Protection System (VPS) sunscreen
- UV protection up to 400 nm VPS automatic retraction system Top ventilation, chin ventilation, air exhausts Removable carbon fitting comfort “ Carbon Fitting Racing Experience” inner comfort padding with innovative mesh construction LPC
- Liner Positioning Control Single-piece cheek pads with removable padding Moulded lining for the inner cheek pads in polystyrene Eye-wear adaptive
- exclusive system designed for the comfort of eyeglass wearers Chin straps integrated in the cheek pads Wind protector Breath deflector Steadyfit cheek pads with increased & reduced thicknesses (available as spare parts) Composite outer shell made from fiberglass & carbon 3 shell sizes XXS-M / L / XL-3XL 6 EPS sizes P/J Homologation The helmet can be used either with the chin guard open (J configuration) or closed (P configuration), as the protective chin guard has passed the homologation tests required by UN/ECE regulations for full face helmets. Dark-tinted* VPS inner visor with UV 400 protection The exclusive inner visor is molded from LEXAN™ & is S/R (Scratch Resistant) treated, with UV protection up to 400 nanometers. It can be easily removed when not needed or for normal maintenance & cleaning. LPC
- Liner Positioning Control This system, patent pending, allows for the regulating of the position of the liner. This permits the positioning of the same-sized helmet to be adjusted for different heads, consequently adapting to various requirements & head shapes. Ultrawide visor The large surface of the S/R (scratch resistant) visor makes it possible to have a broader view, also lateral, thus highly increasing active safety. Pinlock® fog-resistant inner visor Supplied according to segment. Thanks to the patented adjusting system, the stretch of the Pinlock® inner visor can be adjusted, acting from the exterior of the visor, without the necessity of removing. The Full Silicone Border (FSB) allows first of all for an increase in the size of the air chamber located between the helmet exterior & interior, thus further reducing the risk of fogging, secondly, it reduces the risk of scratches to the visor. Molded lining for the inner cheek pads in Polystyrene The helmet has a molded lining for the internal cheek pads in polystyrene, which allows for a more precise fitting of the fabric inner cheek pads. This lining, which gives the product a quality finish, also provides the housing for the earphones of the N-Com communication system. Air Booster Technology The exclusive “ Air Booster Technology” upper system ensures optimal ventilation where the rider’s head most requires: the air is extracted from the upper air intake & forced into the most critical areas, avoiding any dispersion, to guarantee maximum comfort also in extreme riding conditions. dual action (patented) Exclusive dual action chin guard opening system. Positioned in the center of the chin guard, it allows for easy, one-handed opening. The dual action opening mechanism reduces the risk of accidental opening: the chin guard can be opened only operating the first release lever (or safety lock) & then activating the second lever. Microlock 2 (patented) It is a patented double lever retention system with micrometric adjustment. It consists of a thermoplastic ergonomic opening lever, & of a second aluminum toothed & holding lever. The toothed lever releases the micrometric strip, thus the chin strap can only be open with a very broad rotation of the opening lever. This device minimizes the possibility of unintentional opening of the retention system. Set up for N-COM Communication System The helmet is set up & approved with installed N-Com communication system & with the innovative ESS (Emergency Stop Signal). N-COM Compatibility B902 X series
- B602 X series Test rating "good"
- Motorrad Magazin 09-2022 Size chart
- cheek pads Reduced Standard Increased 2XS 3.5cm 40 mm
- XS 30 mm 3.5cm 40 mm S 25 mm 30 mm 3.5cm M 20 mm 25 mm 30 mm L 20 mm 25 mm 30 mm XL 20 mm 25 mm 30 mm 2XL 15 mm 20 mm 25 mm 3XL
- 15 mm 20 mm








...

A travel companion with elegant & dynamic design, equipped with the most advanced technology. The high carbon version, the X-1005 Ultra Carbon, will be the most exclusive & popular model for the most demanding motorcycle tourists. Features Certified according to UN/ECE 22-05 The helmet can be used in open (J) or closed (P) configuration dual action chin guard opening system Chin guard rotation with elliptical trajectory Microlock chin strap closure Scratch resistant, ultrawide visor Pinlock® fog resistant inner visor (inclusive) Quick release shield system Adjustable Vision Protection System (VPS) sunscreen
- UV protection up to 400 nm VPS automatic retraction system Top ventilation, chin ventilation, air exhausts Removable carbon fitting comfort “ Carbon Fitting Racing Experience” inner comfort padding with innovative mesh construction LPC
- Liner Positioning Control Single-piece cheek pads with removable padding Moulded lining for the inner cheek pads in polystyrene Eye-wear adaptive
- exclusive system designed for the comfort of eyeglass wearers Chin straps integrated in the cheek pads Wind protector Breath deflector Steadyfit cheek pads with increased & reduced thicknesses (available as spare parts) Composite outer shell made from fiberglass & carbon 3 shell sizes XXS-M / L / XL-3XL 6 EPS sizes P/J Homologation The helmet can be used either with the chin guard open (J configuration) or closed (P configuration), as the protective chin guard has passed the homologation tests required by UN/ECE regulations for full face helmets. Dark-tinted* VPS inner visor with UV 400 protection The exclusive inner visor is molded from LEXAN™ & is S/R (Scratch Resistant) treated, with UV protection up to 400 nanometers. It can be easily removed when not needed or for normal maintenance & cleaning. LPC
- Liner Positioning Control This system, patent pending, allows for the regulating of the position of the liner. This permits the positioning of the same-sized helmet to be adjusted for different heads, consequently adapting to various requirements & head shapes. Ultrawide visor The large surface of the S/R (scratch resistant) visor makes it possible to have a broader view, also lateral, thus highly increasing active safety. Pinlock® fog-resistant inner visor Supplied according to segment. Thanks to the patented adjusting system, the stretch of the Pinlock® inner visor can be adjusted, acting from the exterior of the visor, without the necessity of removing. The Full Silicone Border (FSB) allows first of all for an increase in the size of the air chamber located between the helmet exterior & interior, thus further reducing the risk of fogging, secondly, it reduces the risk of scratches to the visor. Molded lining for the inner cheek pads in Polystyrene The helmet has a molded lining for the internal cheek pads in polystyrene, which allows for a more precise fitting of the fabric inner cheek pads. This lining, which gives the product a quality finish, also provides the housing for the earphones of the N-Com communication system. Air Booster Technology The exclusive “ Air Booster Technology” upper system ensures optimal ventilation where the rider’s head most requires: the air is extracted from the upper air intake & forced into the most critical areas, avoiding any dispersion, to guarantee maximum comfort also in extreme riding conditions. dual action (patented) Exclusive dual action chin guard opening system. Positioned in the center of the chin guard, it allows for easy, one-handed opening. The dual action opening mechanism reduces the risk of accidental opening: the chin guard can be opened only operating the first release lever (or safety lock) & then activating the second lever. Microlock 2 (patented) It is a patented double lever retention system with micrometric adjustment. It consists of a thermoplastic ergonomic opening lever, & of a second aluminum toothed & holding lever. The toothed lever releases the micrometric strip, thus the chin strap can only be open with a very broad rotation of the opening lever. This device minimizes the possibility of unintentional opening of the retention system. Set up for N-COM Communication System The helmet is set up & approved with installed N-Com communication system & with the innovative ESS (Emergency Stop Signal). N-COM Compatibility B902 X series
- B602 X series Test rating "good"
- Motorrad Magazin 09-2022 Size chart
- cheek pads Reduced Standard Increased 2XS 3.5cm 40 mm
- XS 30 mm 3.5cm 40 mm S 25 mm 30 mm 3.5cm M 20 mm 25 mm 30 mm L 20 mm 25 mm 30 mm XL 20 mm 25 mm 30 mm 2XL 15 mm 20 mm 25 mm 3XL
- 15 mm 20 mm








...

A travel companion with elegant & dynamic design, equipped with the most advanced technology. The high carbon version, the X-1005 Ultra Carbon, will be the most exclusive & popular model for the most demanding motorcycle tourists. Features Certified according to UN/ECE 22-05 The helmet can be used in open (J) or closed (P) configuration dual action chin guard opening system Chin guard rotation with elliptical trajectory Microlock chin strap closure Scratch resistant, ultrawide visor Pinlock® fog resistant inner visor (inclusive) Quick release shield system Adjustable Vision Protection System (VPS) sunscreen
- UV protection up to 400 nm VPS automatic retraction system Top ventilation, chin ventilation, air exhausts Removable carbon fitting comfort “ Carbon Fitting Racing Experience” inner comfort padding with innovative mesh construction LPC
- Liner Positioning Control Single-piece cheek pads with removable padding Moulded lining for the inner cheek pads in polystyrene Eye-wear adaptive
- exclusive system designed for the comfort of eyeglass wearers Chin straps integrated in the cheek pads Wind protector Breath deflector Steadyfit cheek pads with increased & reduced thicknesses (available as spare parts) Composite outer shell made from fiberglass & carbon 3 shell sizes XXS-M / L / XL-3XL 6 EPS sizes P/J Homologation The helmet can be used either with the chin guard open (J configuration) or closed (P configuration), as the protective chin guard has passed the homologation tests required by UN/ECE regulations for full face helmets. Dark-tinted* VPS inner visor with UV 400 protection The exclusive inner visor is molded from LEXAN™ & is S/R (Scratch Resistant) treated, with UV protection up to 400 nanometers. It can be easily removed when not needed or for normal maintenance & cleaning. LPC
- Liner Positioning Control This system, patent pending, allows for the regulating of the position of the liner. This permits the positioning of the same-sized helmet to be adjusted for different heads, consequently adapting to various requirements & head shapes. Ultrawide visor The large surface of the S/R (scratch resistant) visor makes it possible to have a broader view, also lateral, thus highly increasing active safety. Pinlock® fog-resistant inner visor Supplied according to segment. Thanks to the patented adjusting system, the stretch of the Pinlock® inner visor can be adjusted, acting from the exterior of the visor, without the necessity of removing. The Full Silicone Border (FSB) allows first of all for an increase in the size of the air chamber located between the helmet exterior & interior, thus further reducing the risk of fogging, secondly, it reduces the risk of scratches to the visor. Molded lining for the inner cheek pads in Polystyrene The helmet has a molded lining for the internal cheek pads in polystyrene, which allows for a more precise fitting of the fabric inner cheek pads. This lining, which gives the product a quality finish, also provides the housing for the earphones of the N-Com communication system. Air Booster Technology The exclusive “ Air Booster Technology” upper system ensures optimal ventilation where the rider’s head most requires: the air is extracted from the upper air intake & forced into the most critical areas, avoiding any dispersion, to guarantee maximum comfort also in extreme riding conditions. dual action (patented) Exclusive dual action chin guard opening system. Positioned in the center of the chin guard, it allows for easy, one-handed opening. The dual action opening mechanism reduces the risk of accidental opening: the chin guard can be opened only operating the first release lever (or safety lock) & then activating the second lever. Microlock 2 (patented) It is a patented double lever retention system with micrometric adjustment. It consists of a thermoplastic ergonomic opening lever, & of a second aluminum toothed & holding lever. The toothed lever releases the micrometric strip, thus the chin strap can only be open with a very broad rotation of the opening lever. This device minimizes the possibility of unintentional opening of the retention system. Set up for N-COM Communication System The helmet is set up & approved with installed N-Com communication system & with the innovative ESS (Emergency Stop Signal). N-COM Compatibility B902 X series
- B602 X series Test rating "good"
- Motorrad Magazin 09-2022 Size chart
- cheek pads Reduced Standard Increased 2XS 3.5cm 40 mm
- XS 30 mm 3.5cm 40 mm S 25 mm 30 mm 3.5cm M 20 mm 25 mm 30 mm L 20 mm 25 mm 30 mm XL 20 mm 25 mm 30 mm 2XL 15 mm 20 mm 25 mm 3XL
- 15 mm 20 mm








...

This is X-lite’s exclusive high-carbon content version of the new flip up helmet. It is characterised by an elegant & dynamic design, a striking appearance & an ample range of technical features, some of which are highly innovative. Carbon-rich construction, three outer shell sizes, double P/J homologation, ultrawide visor, VPS sunscreen (adjustable in various positions & fitted with the automatic retraction system), rotation of the chin guard with elliptical trajectory, exclusive double action chin guard opening mechanism, double lever Microlock² retention system with micrometric adjustment, Carbon Fitting Racing Experience inner comfort padding (with an innovative net construction), exclusive Liner Positioning Control (LPC) system & set-up for the new generation N-Com communication system make the X-1005 ULTRA CARBON the most exclusive flip up helmet for the most demanding of motorbike tourists. Features Ultra Carbon Fiber-Shell of multi-axial hybrid fabrics (carbon-glass & aramid-glass) P/J homologation Pinlock-ready anti-scratch visor (Pinlock FSB 4L) Quick release visor system Sunscreen UV-400 protection Microlock retention system Dual control lift Wind protector Breath deflector N-COM ready Homologized UN/ECE 22-05 P/J Homologation The helmet can be used either with the chin guard open (J configuration) or closed (P configuration), as the protective chin guard has passed the homologation tests required by UN/ECE regulations for full-face helmets. Ultrawide visor The large surface of the S/R (Scratch Resistant) visor makes it possible to have a broader view, also lateral, thus highly increasing active safety. Pinlock® Fog-resistant inner visor Thanks to the patented adjusting system, the stretch of the Pinlock® inner visor can be adjusted, acting from the exterior of the visor, without the necessity of removing. The Full Silicone Border (FSB), adopted under license from Pinlock®, allows first of all for an increase in the size of the air chamber located between the helmet exterior & interior, thus further reducing the risk of fogging, secondly, it reduces the risk of scratches to the visor. VPS sunscreen Moulded out of LEXAN™*, it is S/R (Scratch Resistant) & F/R (Fog Resistant) treated & offers UV protection up to 400 nanometres. It can be easily removed for maintenance & cleaning & is fully-adjustable. The activation system (patented) allows for the automatic retraction of the sunscreen in a standby position, thus simplifying emergency maneuvers required to quickly obtain the maximum level of visibility offered by the visor. Ventilation system The exclusive complete & extremely efficient ventilation system uses three different systems of air-flow management via a front intake, two upper intakes & two rear extractors which allow optimal air circulation inside the helmet. An opening located in the lower part of the visor further contributes to ventilation around the mouth area, limiting fogging & the formation of condensation on the visor itself when the helmet is used in full face configuration. Chin guard rotation with elliptical trajectory The chin guard rotation movement with elliptical trajectory makes it possible to keep the total size of the helmet’s front section to a minimum, when the chin guard is open. The “sail” effect is consequently highly reduced & riding comfort is still guaranteed, even when the chin guard is lifted. dual action (patented) Exclusive dual action chin guard opening system. Positioned in the center of the chin guard, it allows for easy, one-handed opening. The dual action opening mechanism reduces the risk of accidental opening: the chin guard can be opened only operating the first release lever (or safety lock) & then activating the second lever. LPC
- Liner Positioning Control This system, patent pending, allows for the regulating of the position of the liner. This permits the positioning of the same-sized helmet to be adjusted for different heads, consequently adapting to various requirements & head shapes. Moulded lining for the inner cheek pads in Polystyrene The helmet has a moulded lining for the internal cheek pads in polystyrene which allows for a more precise fitting of the fabric inner cheek pads. This lining, which gives the product a quality finish, also provides the housing for the earphones of the N-Com communication system. “CARBON FITTING" Comfort inner padding with innovative net construction The comfort inner padding is made with active carbon filaments, a thermo-regulating, antistatic & dissipative element. The liner, with an innovative net construction, aids the movement of air around the upper part of the head which thus stays cool & dry. Eyewear adaptive This system has been designed for the comfort of eyeglass wearers. In a quick & easy way, it allows to obtain a space in the cheek pads for the glasses temples. It is reversible, so the cheek pads can be returned to the initial configuration. To further facilitate the washing, the cheek pads are equipped with expanded foam inner padding which can be taken out from the fabric covering. Integrated chin straps Removable & washable, they are integrated in the cheek pads, favouring the helmet’s fit as well as its wearability & soundproofing. Microlock² (patented) Availability according to the product version. It is a patented double lever retention system with micrometric adjustment. It consists of a thermoplastic ergonomic opening lever, & of a second aluminium toothed & holding lever. The toothed lever releases the micrometric strip, thus the chin strap can only be open with a very broad rotation of the opening lever. This device minimizes the possibility of unintentional opening of the retention system. Single-Block cheek pads The internal padding in expanded foam for the cheek pads has been designed in order to provide superior even pressure & consistent performance over time compared to traditional padding. It can also be removed from its fabric coverings in order to make washing of the latter easier. Set up for N-COM communication system The helmet is ready & approved with the N-Com communication system installed. The system allowing for the installation & the N-COM compatibility B902 X series
- B601 X series SHARP – THE HELMET SAFETY SCHEME Nolangroup proudly underlines that all of its products
- Nolan, X-lite & Grex
- tested by SHARP, the prominent independent test system run by the British Government, have obtained at least four stars. Furthermore, all “flip-up” helmets have received the highest possible rating in terms of chin guard latch reliability. This means that, for each of the products tested by SHARP, the chin guard remains completely closed during each of the 30 impacts. Note Please note that as long as nothing else is written in the article description, all helmets that have a visor as standard will be delivered with a clear one, even if it s shown differently.



...

This is X-lite’s exclusive high-carbon content version of the new flip up helmet. It is characterised by an elegant & dynamic design, a striking appearance & an ample range of technical features, some of which are highly innovative. Carbon-rich construction, three outer shell sizes, double P/J homologation, ultrawide visor, VPS sunscreen (adjustable in various positions & fitted with the automatic retraction system), rotation of the chin guard with elliptical trajectory, exclusive double action chin guard opening mechanism, double lever Microlock² retention system with micrometric adjustment, Carbon Fitting Racing Experience inner comfort padding (with an innovative net construction), exclusive Liner Positioning Control (LPC) system & set-up for the new generation N-Com communication system make the X-1005 ULTRA CARBON the most exclusive flip up helmet for the most demanding of motorbike tourists. Features Ultra Carbon Fiber-Shell of multi-axial hybrid fabrics (carbon-glass & aramid-glass) P/J homologation Pinlock-ready anti-scratch visor (Pinlock FSB 4L) Quick release visor system Sunscreen UV-400 protection Microlock retention system Dual control lift Wind protector Breath deflector N-COM ready Homologized UN/ECE 22-05 P/J Homologation The helmet can be used either with the chin guard open (J configuration) or closed (P configuration), as the protective chin guard has passed the homologation tests required by UN/ECE regulations for full-face helmets. Ultrawide visor The large surface of the S/R (Scratch Resistant) visor makes it possible to have a broader view, also lateral, thus highly increasing active safety. Pinlock® Fog-resistant inner visor Thanks to the patented adjusting system, the stretch of the Pinlock® inner visor can be adjusted, acting from the exterior of the visor, without the necessity of removing. The Full Silicone Border (FSB), adopted under license from Pinlock®, allows first of all for an increase in the size of the air chamber located between the helmet exterior & interior, thus further reducing the risk of fogging, secondly, it reduces the risk of scratches to the visor. VPS sunscreen Moulded out of LEXAN™*, it is S/R (Scratch Resistant) & F/R (Fog Resistant) treated & offers UV protection up to 400 nanometres. It can be easily removed for maintenance & cleaning & is fully-adjustable. The activation system (patented) allows for the automatic retraction of the sunscreen in a standby position, thus simplifying emergency maneuvers required to quickly obtain the maximum level of visibility offered by the visor. Ventilation system The exclusive complete & extremely efficient ventilation system uses three different systems of air-flow management via a front intake, two upper intakes & two rear extractors which allow optimal air circulation inside the helmet. An opening located in the lower part of the visor further contributes to ventilation around the mouth area, limiting fogging & the formation of condensation on the visor itself when the helmet is used in full face configuration. Chin guard rotation with elliptical trajectory The chin guard rotation movement with elliptical trajectory makes it possible to keep the total size of the helmet’s front section to a minimum, when the chin guard is open. The “sail” effect is consequently highly reduced & riding comfort is still guaranteed, even when the chin guard is lifted. dual action (patented) Exclusive dual action chin guard opening system. Positioned in the center of the chin guard, it allows for easy, one-handed opening. The dual action opening mechanism reduces the risk of accidental opening: the chin guard can be opened only operating the first release lever (or safety lock) & then activating the second lever. LPC
- Liner Positioning Control This system, patent pending, allows for the regulating of the position of the liner. This permits the positioning of the same-sized helmet to be adjusted for different heads, consequently adapting to various requirements & head shapes. Moulded lining for the inner cheek pads in Polystyrene The helmet has a moulded lining for the internal cheek pads in polystyrene which allows for a more precise fitting of the fabric inner cheek pads. This lining, which gives the product a quality finish, also provides the housing for the earphones of the N-Com communication system. “CARBON FITTING" Comfort inner padding with innovative net construction The comfort inner padding is made with active carbon filaments, a thermo-regulating, antistatic & dissipative element. The liner, with an innovative net construction, aids the movement of air around the upper part of the head which thus stays cool & dry. Eyewear adaptive This system has been designed for the comfort of eyeglass wearers. In a quick & easy way, it allows to obtain a space in the cheek pads for the glasses temples. It is reversible, so the cheek pads can be returned to the initial configuration. To further facilitate the washing, the cheek pads are equipped with expanded foam inner padding which can be taken out from the fabric covering. Integrated chin straps Removable & washable, they are integrated in the cheek pads, favouring the helmet’s fit as well as its wearability & soundproofing. Microlock² (patented) Availability according to the product version. It is a patented double lever retention system with micrometric adjustment. It consists of a thermoplastic ergonomic opening lever, & of a second aluminium toothed & holding lever. The toothed lever releases the micrometric strip, thus the chin strap can only be open with a very broad rotation of the opening lever. This device minimizes the possibility of unintentional opening of the retention system. Single-Block cheek pads The internal padding in expanded foam for the cheek pads has been designed in order to provide superior even pressure & consistent performance over time compared to traditional padding. It can also be removed from its fabric coverings in order to make washing of the latter easier. Set up for N-COM communication system The helmet is ready & approved with the N-Com communication system installed. The system allowing for the installation & the compatible N-Com product itself, have both been designed with the aim of facilitating the assembly of the system N-COM compatibility B902 X series
- B601 X series SHARP – THE HELMET SAFETY SCHEME Nolangroup proudly underlines that all of its products
- Nolan, X-lite & Grex
- tested by SHARP, the prominent independent test system run by the British Government, have obtained at least four stars. Furthermore, all “flip-up” helmets have received the highest possible rating in terms of chin guard latch reliability. This means that, for each of the products tested by SHARP, the chin guard remains completely closed during each of the 30 impacts. Note Please note that as long as nothing else is written in the article description, all helmets that have a visor as standard will be delivered with a clear one, even if it s shown differently.



...

Replacement cheek pads for X-Lite helmets. Suitable for X-1005 X-1005 Ultra ...

Replacement cheek pads for X-Lite helmets. Suitable for X-1005 X-1005 Ultra ...