The converter cable from DIN ø 12 mm BIKE socket to SAE – 100 cm/40 inch. Features The DIN / ISO 4165 standard Opti Mate BIKE plug fits 12 V sockets of BMW, Triumph & Ducati Multistrada motorcycles & some marine & agricultural equipment. 90° angled connection – low profile!

Includes:: weatherproof in-line SAE seal Perfect for use in the harshest environments, Low temperature use -40°C/-40°F – Remains Flexible! LENGTH: 40″/100 cm CONNECTORS: Low profile Ø 12 mm DIN / BIKE 90° plug to SAE CABLE RATING: 18 AWG (0.82 mm 2) SPT-2W STYLE:

Includes:: in-line rubber seal for Opti MATE heavy duty SAE connector



...

The perfect travel extender Features Length 40″/100 cm Extend your SAE connection Industry standard durability – Built to last!



...

Create a weatherproof bulkhead/panel mount SAE power point. Features Drop in replacement for the BMW, Triumph & Ducati 12V DIN ‘ Hella’ socket Front panel mount with rear fastener Connector body fits a Ø 18 mm (23/32”) drilled hole Industry standard durability – Built to last! Perfect for use in the harshest environments, Low temperature use -40° C/-40° F – Remains Flexible LENGTH: 40″/100 cm CONNECTORS: SAE to SAE CABLE RATING: 18 AWG (0.82 mm 2) SPT-2W STYLE: Front mount, rear fastener, for panel from 1 mm / 0.040″ thickness

Includes:: in-line rubber seal for Opti MATE SAE connector

...

Create a weatherproof bulkhead/panel mount SAE power point with short cable. Features Perfectly adapted for Harley Davidson – Short cable length for easy connection to existing HD SAE cable. Front panel mount with rear fastener Connector body fits a Ø 18 mm (23/32”) drilled hole. Industry standard durability – Built to last! Perfect for use in the harshest environments, Low temperature use -40° C/-40° F – Remains Flexible! LENGTH: 6″/15 cm CONNECTORS: SAE to SAE CABLE RATING: 18 AWG (0.82 mm 2) SPT-2W STYLE: Front mount, rear fastener, for panel from 1 mm / 0.040″ thickness

Includes:: in-line rubber seal for Opti MATE SAE connector.

...

Converts the Ducati diagnostic connector to an Opti Mate SAE battery charger connector. Features Ideal for Opti Mate 1, 2, 3, 4 & Opti Mate 6 battery chargers Works on all 2010 – 2019 Ducati models except 848 – 848 Evo – 1198SP Fuse protected, with weatherproof cap & seal for SAE connector Cable rated for use from 60° C / 140° F down to -40° C/-40° F – Remains Flexible below freezing! LENGTH: 12″/30 cm CONNECTORS: Ducati >2010 to SAE CABLE RATING: 18 AWG (0.82 mm 2) SPT-1 FUSE: 7.5 Amp STYLE: I
Includes: sealing cap for Opti MATE heavy duty SAE connector.
...

Opti Mate PRO-1 DUO. PRO series: 12 V 10 A diagnostic battery charger tester & power supply. Opti Mate PRO-1 DUO, the professional combination charger tester & power supply for powersport & small craft/machine professionals, repair shops & battery retailers. Features Suitable for new or used 12 V lead acid (3-50 Ah) & 12.8 V/13.2 V Li Fe PO4 (2-20 Ah) batteries 3 choices: Choose a charging mode for 12 V lead-acid OR 12.8 V Li Fe PO4, or select power supply mode for battery support during vehicle diagnostics, tuning or troubleshooting Automatic quick battery activation: a flashing green test light indicates that the battery is healthy & sufficiently charged Intelligent recovery mode for deeply discharged batteries, a bad battery is quickly identified, a good battery is charged & then retested Push button activated BMS recovery for Li Fe PO4 batteries Test battery indicator for GOOD (80 to 100%), OK (60 to 80%), & POOR (below 60) Power supply mode provides constant power for vehicle tu... ...

Optimate PRO-4, 4-Bank. The 4-bank battery care center recommended by original equipment manufacturers for the proper activation of NEW batteries & the rescue, charging & testing of neglected batteries/low voltage batteries. Features NEW mode
- 1-hour activation charge only for new batteries filled with acid immediately prior to charging, such as STD wet batteries with removable caps & "dry charged" AGM MF batteries supplied with a special separate acid pack. 2 A-/4 A mode
- max. 12 hours sustained charge mode for diagnosis, rescue, charging, testing sulfated low voltage batteries. Suitable for charging all batteries, including factory activated encapsulated AGM batteries (e.g. Yuasa YTZ, GYZ) prior to sale An informational poster is included with instructions for preparing & charging batteries Banks/charging stations: 4 (each bank works independently) Charging current (per bank): 4A max, Ampmatic control. (2 A max. when 2 A is selected) USE: rooms/workshop environment (lowest...

...

Optimate PRO-8, 8-Channel. The 8-channel battery care center recommended by motorsports original equipment manufacturers for salvaging, charging & testing all 6V & 12V batteries, including neglected sulfated/low voltage batteries. Features Selectable charging voltage
- select 6 V or 12 V battery voltage for each bank. Fully automatic
- No selection required, no battery knowledge needed! Connect up to 8 x 6 V & 12 V batteries & let the charger do the rest! Banks/charging stations: 8 (each bank works independently) Charging current: (per bank): 1 A USE: rooms/workshop environment (lowest temperature: -20 °C) Rescue: start with low voltage of 1.8 V + 1-stage desulfation rescue Ideal for: STD, AGM & GEL 6 V or 12 V batteries of 2 Ah INPUT: Selectable 110-120 VAC / 220-240 VAC 50-60 Hz, with main switch & replaceable fuse Construction: Ventilated industrial table-top case with wall mount (TS-218), 180 cm power cord & 8x 180 cm charging cables with SAE connectors 8x standard battery terminal set included Safety No risk of overcharging Spark suppression Safe for long term battery maintenance Automatic shutdown in case of short circuit or disconnected battery

...

Opti MATE cable O-23. 10 Amp low temperature charging cable extension with weather & dirt protected SAE connection system. Features Length: 460 cm Industry standard 2-pin SAE connector Cable standard: 16 AWG (1.31 mm 2) SPT-2W Max. cable load: 5 A Use at very low temperatures: down to -40 °C Cable remains flexible at sub-freezing temperatures With rubber cable seal for Opti MATE heavy-duty SAE connection High quality cable, developed by Tec Mate ...

5 Amp low temperature charging cable extension with weather & dirt protected SAE connection system. Features O-03 length: 180 cm / 6 ft O-13 length: 460 cm / 15 ft O-33 length: 100 cm / 40 inch Industry standard 2-pin SAE connector Max. Cable load: 5 A Use at very low temperatures: down to -40 ° C Cable remains flexible at sub-freezing temperatures

Includes:: an in-line rubber gasket for the Opti MATE high performance SAE connector High quality cable, designed by Tec Mate

...