The perfect adapter to quickly charge battery through an auto socket. Features Fits your auto socket

Includes::

...

SAE flashlight with charging problem indicator. Confirm if vehicle charging system is working or battery is charged & provide emergency roadside light, powered via your permanent battery lead or an an optional BIKE / AUTO socket accessory. Features Emergency flashlight that runs off SAE connection 6 Bright LED’s – Perfect for roadside emergencies Monitor your charging system, Green indicates healthy, Red indicates problem Sealed & weatherproof – perfect for outside use Cable Length – 40″/100 cm BATTERY CONNECTOR (INPUT): 2-pin SAE CHARGE CONNECTOR (OUTPUT): 6 bright LEDs OPERATION: 2 automatic Modes – Battery charge level monitor (single LED blink mode) & 6 LED safety light GREEN LED indicates: vehicle charge voltage is 14 V or higher RED LED indicates: battery voltage is less than 12.3 V CABLE RATING: SPT-2W 16 AWG (1.32 mm 2) FUSE: No fuse USE: -40° C/-40° F very low temperature, remains flexible at ‘below freezing’ temperatures STYLE: Fully enclosed electronic circuitry with 6 LEDs ...

Weatherproof battery lead with state of charge monitor for the 12 V lead-acid battery in your parked powersport vehicle – 24-7 battery status at a blink of an LED! Features With M6 / 1/4″ – M8 / 5/16″ ringlets that perfectly fit your powersport battery terminals, & 15 A fuse that protects the -40° C rated cable & electronics – Premium quality! Sealed monitor with 4 LEDs indicate battery state of charge from full to empty for 12V lead-acid (AGM, GEL or STD) batteries – LED corresponding to charge level blinks every 3 seconds. SAE quick connect charge port for charging battery when needed – with weatherproof sealing cap when vehicle is moving! Displays charge system status when engine is running – easy pre-ride check at a glance to see if battery is receiving charge. LENGTH: 24″/60 cm BATTERY CONNECTOR: 1/4″ (M6) / 5/16” (M8) ringlets CHARGE CONNECTOR: 2-pin SAE, protected from dirt & liquid with rubber sealing cap & shroud. OPERATION: 2 automatic Modes – Battery charge level monitor (single LED blink mode) & Charging system test (arrow mode). Vehicle storage: 4 LEDs cover ‘full to empty’ voltage range of all 12 V batteries, including higher voltage AGM for power sport (4th √√LED ≥ 12.7 V ). LED matching charge level blinks every 3 seconds (long term draw less than 0.2 m A). Vehicle running: LED arrow mode activates when charge voltage reaches ideal charging voltage, up to minimum 13.5 V (√ green LED) or ideal range 14 V+ (√√ green LED). CABLE RATING: 18 AWG (0.82 mm 2) SPT-2W FUSE: 15 Amp STYLE: Fully enclosed electronic circuitry with 4 LEDs, SAE charge connector with rubber sealing cap & shroud ...

The longest extender for power sport vehicles. Features Length 15 ft/460 cm Extend your SAE connection Industry standard durability – Built to last!

Includes:: weatherproof rubber seal for heavy-duty SAE connector Low temperature use -20° C/-4° F – Remains Flexible! CONNECTORS: SAE to SAE CABLE RATING: 18 AWG (0.82 mm 2) SPT-2 STYLE:

Includes:: in-line rubber seal for Opti MATE heavy duty SAE connector



...

Fused custom designed battery clips to fit all batteries. Features Fits round, square & flat battery post Easy grip rubber handles 15 A fuse protect from power surge & short circuiting Industry standard durability – Built to last! Perfect for use in the harshest environments, Low temperature use -40° C/-40° F – Remains Flexible! LENGTH: 20″/50 cm CONNECTORS: Battery clips to SAE CABLE RATING: 16 AWG (1.31 mm 2) SPT-2W FUSE: 15 Amp STYLE:

Includes:: in-line rubber seal for Opti MATE heavy duty SAE connector

...

Create your own AUTO socket from a bike plug – for an automotive plug, style USB (Universal Serial Bus) charger or GPS adapter. Features Internal locking slots keep your accessory securely in position whilst riding Fits BMW, Victory, Triumph & John Deere charging ports Industry standard durability – Built to last!

Includes:: weatherproof sealing DIN plug & Auto socket cap Low temperature use -20°C/-4°F – Remains Flexible! LENGTH: 12″/30 cm CONNECTORS: BIKE (DIN) plug to Ø 21 mm AUTO socket STYLE:

Includes:: cap to protect plug tip



...

Create your own DIN ø 12 mm socket with spring cap on your vehicle Features

Includes:: weatherproof permanent

...

Spring loaded DIN bike socket. Features Fits BMW, Triumph, Victory, selected Honda Goldwing motorcycles & John Deere ATV’s Two pin connector with metal sealing nut Heavy duty spring load cap Strong locking connection to devices Durable metal casing LENGTH: 11/16” / 18 mm Hole size CONNECTORS: ¼’/6 mm Spade connector to Ø 12 mm DIN Metal socket USE: -40° C/-40° F very low temperature use STYLE: Premium BIKE socket designed by Tec Mate ...

Create a weatherproof bulkhead/panel mount SAE power point. Connector body fits a Ø 1 ″/25 mm drilled hole. Rubber expander bushing secures the connector in the hole. Features Easy mount – Drill the hole, fit the socket, tighten the nut Front panel mount – Only front access needed to fasten Connector fits a Ø 1 ″/25 mm drilled hole Industry standard durability – Built to last! Perfect for use in the harshest environments, Low temperature use -40° C/-40° F – Remains Flexible! LENGTH: 12″/30 cm CONNECTORS: SAE to SAE CABLE RATING: 16 AWG (1.31 mm 2) SPT-2W USE: -40° C/-40° F very low temperature, cable remains flexible in ‘below freezing’ temperatures STYLE:

Includes:: in-line rubber seal for Opti Mate heavy duty SAE connector

...

Supply your heated clothing (jacket/gloves etc.) with a 5.5 × 2.5 mm plug directly from your permanent battery cable. Features Length: 100 cm M6 eyelets for connection to the battery DC 2.5 × 5.5 mm socket 15A fuse Max. Cable load: 10 Amp Use at very low temperatures: down to -40 °C The cable remains flexible at temperatures below freezing Including sealing cap for DC plug High quality cable, developed by Tec Mate 3 year limited warranty ...