Adventure boot Drifter Waterproof, made in the traditional " Ideal" way, with double stitching & insole for increased resistance. made from full-grain leather with impermeable T-DRY membrane for use in all weather conditions, pull-up finish with vintage effect & inserts in microfiber. The reinforced inserts in polyurethane on the shin, ankle, toe & heel & the protection in the gear shift area guarantee maximum safety. The inside is equipped with suede that protects against the heat of the motorcycle. The front & rear of the boot has areas of microfiber to improve comfort & get a more flexible fit. The closure system consists of three wear-resistant & interchangeable aluminum levers with ergonomic design, which facilitates opening & closing. The sole with textured tread ensures maximum grip on any surface, allowing it to be used anywhere, whether on asphalt or off-road. The model is equipped with insoles with Ortho Lite® technology, for perfect cushioning of movements & high breathability. Features Leather with pull-up finish Microfiber front & back Suede heat protection for a better grip on the bike Elastic shoe collar that protects against dirt & debris Reflective insert at the back Waterproof T-Dry membrane Polyurethane shin reinforcement Inserts in the ankle, toe & heel areas Leather strap protector 3 adjustable & replaceable straps in aluminum ALU6060, ergonomic design Ortho Lite® insole with durable, highly breathable cushioning Stitched construction " Ideal Textured rubber tread for maximum grip on any surface "IDEAL" construction technic The " Ideal" construction technic is a craft-based construction process that guarantees comfort, hard-wearing resistance & flexibility for footwear thanks to a totally traditional production process. The leather upper, prepared with the outer edges bonded & pressed onto a dedicated midsole, is stitched vertically. The yarn employed, which used to be cotton, & then replaced by nylon or synthetic material, is dipped in a purpose-designed boiler full of melted tar to ensure the yarn & holes are totally waterproof. The result is a finest top quality footwear whose distinguishing features are prestige & durability. Ortholite® foot bed Experience the comfort of the foot beds made with Ortho Lite® PU foam. Long-term cushioning: Ortho Lite® foam compresses less than 5% of its thickness over the lifetime of the footbed, so the cushioning, fit, comfort & performance never change. High level breathability: the open-cells of the Ortho Lite® foam, allows air to circulate in & around the footbed, moving the moisture away & keeping the foot cooler & drier. ...

Adventure boot Drifter Waterproof, made in the traditional " Ideal" way, with double stitching & insole for increased resistance. made from full-grain leather with impermeable T-DRY membrane for use in all weather conditions, pull-up finish with vintage effect & inserts in microfiber. The reinforced inserts in polyurethane on the shin, ankle, toe & heel & the protection in the gear shift area guarantee maximum safety. The inside is equipped with suede that protects against the heat of the motorcycle. The front & rear of the boot has areas of microfiber to improve comfort & get a more flexible fit. The closure system consists of three wear-resistant & interchangeable aluminum levers with ergonomic design, which facilitates opening & closing. The sole with textured tread ensures maximum grip on any surface, allowing it to be used anywhere, whether on asphalt or off-road. The model is equipped with insoles with Ortho Lite® technology, for perfect cushioning of movements & high breathability. Features Leather with pull-up finish Microfiber front & back Suede heat protection for a better grip on the bike Elastic shoe collar that protects against dirt & debris Reflective insert at the back Waterproof T-Dry membrane Polyurethane shin reinforcement Inserts in the ankle, toe & heel areas Leather strap protector 3 adjustable & replaceable straps in aluminum ALU6060, ergonomic design Ortho Lite® insole with durable, highly breathable cushioning Stitched construction " Ideal Textured rubber tread for maximum grip on any surface "IDEAL" construction technic The " Ideal" construction technic is a craft-based construction process that guarantees comfort, hard-wearing resistance & flexibility for footwear thanks to a totally traditional production process. The leather upper, prepared with the outer edges bonded & pressed onto a dedicated midsole, is stitched vertically. The yarn employed, which used to be cotton, & then replaced by nylon or synthetic material, is dipped in a purpose-designed boiler full of melted tar to ensure the yarn & holes are totally waterproof. The result is a finest top quality footwear whose distinguishing features are prestige & durability. Ortholite® foot bed Experience the comfort of the foot beds made with Ortho Lite® PU foam. Long-term cushioning: Ortho Lite® foam compresses less than 5% of its thickness over the lifetime of the footbed, so the cushioning, fit, comfort & performance never change. High level breathability: the open-cells of the Ortho Lite® foam, allows air to circulate in & around the footbed, moving the moisture away & keeping the foot cooler & drier. ...

Adventure boot Drifter Waterproof, made in the traditional " Ideal" way, with double stitching & insole for increased resistance. made from full-grain leather with impermeable T-DRY membrane for use in all weather conditions, pull-up finish with vintage effect & inserts in microfiber. The reinforced inserts in polyurethane on the shin, ankle, toe & heel & the protection in the gear shift area guarantee maximum safety. The inside is equipped with suede that protects against the heat of the motorcycle. The front & rear of the boot has areas of microfiber to improve comfort & get a more flexible fit. The closure system consists of three wear-resistant & interchangeable aluminum levers with ergonomic design, which facilitates opening & closing. The sole with textured tread ensures maximum grip on any surface, allowing it to be used anywhere, whether on asphalt or off-road. The model is equipped with insoles with Ortho Lite® technology, for perfect cushioning of movements & high breathability. Features Leather with pull-up finish Microfiber front & back Suede heat protection for a better grip on the bike Elastic shoe collar that protects against dirt & debris Reflective insert at the back Waterproof T-Dry membrane Polyurethane shin reinforcement Inserts in the ankle, toe & heel areas Leather strap protector 3 adjustable & replaceable straps in aluminum ALU6060, ergonomic design Ortho Lite® insole with durable, highly breathable cushioning Stitched construction " Ideal Textured rubber tread for maximum grip on any surface "IDEAL" construction technic The " Ideal" construction technic is a craft-based construction process that guarantees comfort, hard-wearing resistance & flexibility for footwear thanks to a totally traditional production process. The leather upper, prepared with the outer edges bonded & pressed onto a dedicated midsole, is stitched vertically. The yarn employed, which used to be cotton, & then replaced by nylon or synthetic material, is dipped in a purpose-designed boiler full of melted tar to ensure the yarn & holes are totally waterproof. The result is a finest top quality footwear whose distinguishing features are prestige & durability. Ortholite® foot bed Experience the comfort of the foot beds made with Ortho Lite® PU foam. Long-term cushioning: Ortho Lite® foam compresses less than 5% of its thickness over the lifetime of the footbed, so the cushioning, fit, comfort & performance never change. High level breathability: the open-cells of the Ortho Lite® foam, allows air to circulate in & around the footbed, moving the moisture away & keeping the foot cooler & drier. ...

Adventure boot Drifter Waterproof, made in the traditional " Ideal" way, with double stitching & insole for increased resistance. made from full-grain leather with impermeable T-DRY membrane for use in all weather conditions, pull-up finish with vintage effect & inserts in microfiber. The reinforced inserts in polyurethane on the shin, ankle, toe & heel & the protection in the gear shift area guarantee maximum safety. The inside is equipped with suede that protects against the heat of the motorcycle. The front & rear of the boot has areas of microfiber to improve comfort & get a more flexible fit. The closure system consists of three wear-resistant & interchangeable aluminum levers with ergonomic design, which facilitates opening & closing. The sole with textured tread ensures maximum grip on any surface, allowing it to be used anywhere, whether on asphalt or off-road. The model is equipped with insoles with Ortho Lite® technology, for perfect cushioning of movements & high breathability. Features Leather with pull-up finish Microfiber front & back Suede heat protection for a better grip on the bike Elastic shoe collar that protects against dirt & debris Reflective insert at the back Waterproof T-Dry membrane Polyurethane shin reinforcement Inserts in the ankle, toe & heel areas Leather strap protector 3 adjustable & replaceable straps in aluminum ALU6060, ergonomic design Ortho Lite® insole with durable, highly breathable cushioning Stitched construction " Ideal Textured rubber tread for maximum grip on any surface "IDEAL" construction technic The " Ideal" construction technic is a craft-based construction process that guarantees comfort, hard-wearing resistance & flexibility for footwear thanks to a totally traditional production process. The leather upper, prepared with the outer edges bonded & pressed onto a dedicated midsole, is stitched vertically. The yarn employed, which used to be cotton, & then replaced by nylon or synthetic material, is dipped in a purpose-designed boiler full of melted tar to ensure the yarn & holes are totally waterproof. The result is a finest top quality footwear whose distinguishing features are prestige & durability. Ortholite® foot bed Experience the comfort of the foot beds made with Ortho Lite® PU foam. Long-term cushioning: Ortho Lite® foam compresses less than 5% of its thickness over the lifetime of the footbed, so the cushioning, fit, comfort & performance never change. High level breathability: the open-cells of the Ortho Lite® foam, allows air to circulate in & around the footbed, moving the moisture away & keeping the foot cooler & drier. ...

Upper

Material: Microfibre & wear-resistant fabric, reflectors inserts on heel

Lining:



...

Upper material Microfibre & wear-resistant fabric Reflector inserts on heels Lining GORE-TEX " Performance Comfort Footwear" membrane Reinforcements Ankle reinforcement, PU shift reinforcement, shin, toe & heel reinforcement Fastener Elastic zipper for easier access + wide velcro strap Insole Ortholite® footbed with long-term cushioning & high air permeability Sole Touring sole with different grip ranges Gore-Tex® membrane This fine material has important features such as long-term waterproofing, excellent resistance to the most extreme temperatures & high wear resistance. The special microporous structure of the GORE-TEX fabric, made from expanded PTFE, contains around 1.4 billion microscopic pores per square centimeter. These pores are Approx. 20, 000 times smaller than a drop of water, but 700 times larger than a molecule of water vapor. While water cannot penetrate the GORE-TEX membrane in liquid form, perspiration (water vapor) can easily evaporate. The result is a completely waterproof barrier that means the shoe can be used in all climates & guarantees maximum comfort & optimal breathability. Ortholite® foot bed Experience the comfort of the foot beds made with Ortho Lite® PU foam. Long-term cushioning: Ortho Lite® foam compresses less than 5% of its thickness over the lifetime of the footbed, so the cushioning, fit, comfort & performance never change. High level breathability: the open-cells of the Ortho Lite® foam, allows air to circulate in & around the footbed, moving the moisture away & keeping the foot cooler & drier. ...

Upper material Microfibre & wear-resistant fabric Reflector inserts on heels Lining GORE-TEX " Performance Comfort Footwear" membrane Reinforcements Ankle reinforcement, PU shift reinforcement, shin, toe & heel reinforcement Fastener Elastic zipper for easier access + wide velcro strap Insole Ortholite® footbed with long-term cushioning & high air permeability Sole Touring sole with different grip ranges Gore-Tex® membrane This fine material has important features such as long-term waterproofing, excellent resistance to the most extreme temperatures & high wear resistance. The special microporous structure of the GORE-TEX fabric, made from expanded PTFE, contains around 1.4 billion microscopic pores per square centimeter. These pores are Approx. 20, 000 times smaller than a drop of water, but 700 times larger than a molecule of water vapor. While water cannot penetrate the GORE-TEX membrane in liquid form, perspiration (water vapor) can easily evaporate. The result is a completely waterproof barrier that means the shoe can be used in all climates & guarantees maximum comfort & optimal breathability. Ortholite® foot bed Experience the comfort of the foot beds made with Ortho Lite® PU foam. Long-term cushioning: Ortho Lite® foam compresses less than 5% of its thickness over the lifetime of the footbed, so the cushioning, fit, comfort & performance never change. High level breathability: the open-cells of the Ortho Lite® foam, allows air to circulate in & around the footbed, moving the moisture away & keeping the foot cooler & drier. ...

Upper material Microfibre & wear-resistant fabric Reflector inserts on heels Lining GORE-TEX " Performance Comfort Footwear" membrane Reinforcements Ankle reinforcement, PU shift reinforcement, shin, toe & heel reinforcement Fastener Elastic zipper for easier access + wide velcro strap Insole Ortholite® footbed with long-term cushioning & high air permeability Sole Touring sole with different grip ranges Gore-Tex® membrane This fine material has important features such as long-term waterproofing, excellent resistance to the most extreme temperatures & high wear resistance. The special microporous structure of the GORE-TEX fabric, made from expanded PTFE, contains around 1.4 billion microscopic pores per square centimeter. These pores are Approx. 20, 000 times smaller than a drop of water, but 700 times larger than a molecule of water vapor. While water cannot penetrate the GORE-TEX membrane in liquid form, perspiration (water vapor) can easily evaporate. The result is a completely waterproof barrier that means the shoe can be used in all climates & guarantees maximum comfort & optimal breathability. Ortholite® foot bed Experience the comfort of the foot beds made with Ortho Lite® PU foam. Long-term cushioning: Ortho Lite® foam compresses less than 5% of its thickness over the lifetime of the footbed, so the cushioning, fit, comfort & performance never change. High level breathability: the open-cells of the Ortho Lite® foam, allows air to circulate in & around the footbed, moving the moisture away & keeping the foot cooler & drier. ...

Upper material Microfibre & wear-resistant fabric Reflector inserts on heels Lining GORE-TEX " Performance Comfort Footwear" membrane Reinforcements Ankle reinforcement, PU shift reinforcement, shin, toe & heel reinforcement Fastener Elastic zipper for easier access + wide velcro strap Insole Ortholite® footbed with long-term cushioning & high air permeability Sole Touring sole with different grip ranges Gore-Tex® membrane This fine material has important features such as long-term waterproofing, excellent resistance to the most extreme temperatures & high wear resistance. The special microporous structure of the GORE-TEX fabric, made from expanded PTFE, contains around 1.4 billion microscopic pores per square centimeter. These pores are Approx. 20, 000 times smaller than a drop of water, but 700 times larger than a molecule of water vapor. While water cannot penetrate the GORE-TEX membrane in liquid form, perspiration (water vapor) can easily evaporate. The result is a com... ...

Upper material Microfibre & wear-resistant fabric Reflector inserts on heels Lining GORE-TEX " Performance Comfort Footwear" membrane Reinforcements Ankle reinforcement, PU shift reinforcement, shin, toe & heel reinforcement Fastener Elastic zipper for easier access + wide velcro strap Insole Ortholite® footbed with long-term cushioning & high air permeability Sole Touring sole with different grip ranges Gore-Tex® membrane This fine material has important features such as long-term waterproofing, excellent resistance to the most extreme temperatures & high wear resistance. The special microporous structure of the GORE-TEX fabric, made from expanded PTFE, contains around 1.4 billion microscopic pores per square centimeter. These pores are Approx. 20, 000 times smaller than a drop of water, but 700 times larger than a molecule of water vapor. While water cannot penetrate the GORE-TEX membrane in liquid form, perspiration (water vapor) can easily evaporate. The result is a com... ...