ARMOR, unique, unmistakable, iconic design inspired by the world of movies & sci-fi is the helmet to never go unnoticed. The brand new & exclusive SUOMY helmet made from ADT-Advanced thermoplastic material, developed & optimized for urban & low ride use. Lightweight, ventilated, easily convertible from full face to open face, with sun visor & removable liner made with the best technologies to ensure reliability & comfort. Features Shell in ADT in two sizes Spare part radiator grille not homologated in ADT Sun visor Efficient ventilation Removable & washable inner lining QRM- micrometric restraint system Weight: 1200 gr. ± 50 gr. Homologation ECE 22.06 Shell ADT-Advance Thermoplastic shell made from an injection moulded, thermoplastic resin mix with high impact resistance. ARMOR is made in 2 size shell (M & L) to ensure a perfect fit of the helmet. Chin guard The removable chin guard is made from ADT-Advance Thermoplastic, a blend of injection-molded thermoplastic resins & i... ...

Replacement lining for Suomy helmets. Suitable for Suomy Armor * Example image ...

Replacement lining for Suomy helmets. Suitable for Suomy Armor * Example image ...

Replacement lining for Suomy helmets. Suitable for Suomy Armor * Example image ...

Replacement lining for Suomy helmets. Suitable for Suomy Armor * Example image ...

CITY TOUR is the helmet Jet in fiber, studied in details for internal comfort, technology & safety for end user. OUTER SHELL in tricarboco material, mix of Kevlar, carbon & fibre, joint through resin & produced in 2 sizes (M e L), made by hand using new technologies, which foresee aramidic resins. INTERNAL POLYSTYRENE protective lining, available in two sizes (M & L). The special shape & construction in different density increases mechanical resistance in the event of accidental shock. The SHIELD is thermoformed from a polycarbonate flat sheet. Each shield is a one-of-a-kind piece with unequalled optical features & mechanical resistance. Thanks to this process, the face shield is anti scratch & anti fog & there is no need to use additional lenses on the visor. Shield easily practicable with block in jet position. The D-RING RETENTION SYSTEM has been designed & patented by Suomy. Insert the free side of the strap in the rings. Pull the end until the strap presses firmly against the jaw. After this operation, it should not be possible to remove the helmet. Verify that by grabbing it from the back & rotating it to the front it cannot be removed & it is fixed to the head. If the helmet tends to come off or rotates freely, tighten the strap again until the right pressure is obtained & repeat test. If after repeating the test you are not able to efficiently tighten the retention system, do not use the helmet. Only after checking the correct tension of the strap, fix the free end locking it with the automatic stud to the release tab. The automatic stud is necessary only to fix the free end of the strap to prevent it from flapping while riding. Fixing the release button does not assure that the helmet is correctly in position & properly fastened: the correct locking of the strap must be verified exclusively following the above paragraphs. To release the retention system, release the automatic stud button & pull the release tab to loosen the closure. Slide out the free end of the strap from the "D Rings". Use the release tab only to remove the helmet! Never release this tab while riding. CITY TOUR is homologated as per the following rules: ECE 22-05, DOT, INMETRO NBR 7471 CHEEK PADS & INTERNAL SHELL completely removable & washable with different thickness to get a perfect customization of the helmet. It has been studied to have a uniform stand on the helmet. The SHELL is in polystyrene with channels for air flows. In the front part there are upper AIR VENTILATIONS, with on/off system at 360° which help the internal helmet ventilation. On the back part there are air ventilation, which help the outer of air flows. The special shape of the shell allows the air to flow on the whole surface making the helmet stabler & safer. Note Please note that as long as nothing else is written in the article description, all helmets that have a visor as standard will be delivered with a clear one, even if it is shown differently. ...

CITY TOUR is the helmet Jet in fiber, studied in details for internal comfort, technology & safety for end user. OUTER SHELL in tricarboco material, mix of Kevlar, carbon & fibre, joint through resin & produced in 2 sizes (M e L), made by hand using new technologies, which foresee aramidic resins. INTERNAL POLYSTYRENE protective lining, available in two sizes (M & L). The special shape & construction in different density increases mechanical resistance in the event of accidental shock. The SHIELD is thermoformed from a polycarbonate flat sheet. Each shield is a one-of-a-kind piece with unequalled optical features & mechanical resistance. Thanks to this process, the face shield is anti scratch & anti fog & there is no need to use additional lenses on the visor. Shield easily practicable with block in jet position. The D-RING RETENTION SYSTEM has been designed & patented by Suomy. Insert the free side of the strap in the rings. Pull the end until the strap presses firmly against the jaw. After this operation, it should not be possible to remove the helmet. Verify that by grabbing it from the back & rotating it to the front it cannot be removed & it is fixed to the head. If the helmet tends to come off or rotates freely, tighten the strap again until the right pressure is obtained & repeat test. If after repeating the test you are not able to efficiently tighten the retention system, do not use the helmet. Only after checking the correct tension of the strap, fix the free end locking it with the automatic stud to the release tab. The automatic stud is necessary only to fix the free end of the strap to prevent it from flapping while riding. Fixing the release button does not assure that the helmet is correctly in position & properly fastened: the correct locking of the strap must be verified exclusively following the above paragraphs. To release the retention system, release the automatic stud button & pull the release tab to loosen the closure. Slide out the free end of the strap from the "D Rings". Use the release tab only to remove the helmet! Never release this tab while riding. CITY TOUR is homologated as per the following rules: ECE 22-05, DOT, INMETRO NBR 7471 CHEEK PADS & INTERNAL SHELL completely removable & washable with different thickness to get a perfect customization of the helmet. It has been studied to have a uniform stand on the helmet. The SHELL is in polystyrene with channels for air flows. In the front part there are upper AIR VENTILATIONS, with on/off system at 360° which help the internal helmet ventilation. On the back part there are air ventilation, which help the outer of air flows. The special shape of the shell allows the air to flow on the whole surface making the helmet stabler & safer. Note Please be aware, as long as nothing else is written in the item description: All helmets will be delivered only with the ECE certification by default all helmets that have a visor will be delivered with a clear visor, even if it is shown differently. ...

Suomy Breath guard for FZ/GW/VENTURA/EXPLORER ...

Note Please note that as long as nothing else is written in the article description, all helmets that have a visor as standard will be delivered with a clear one, even if it is shown differently. ...

*example picture Here you find some information about Pinlock Anti-Fog lenses ...