SPIDI MISSION-T was developed for the highest demands of the Adventure Touring driver & presents for the first time SPIDI s own STEP-IN ARMOR technology. This jacket is the combination of three layers: Armor, Soft Shell & Hard Shell. Armor: Mission-T marks the special feature of an inner jacket with mesh layers & a certification according to Pr En 17092-3: 2017 Class A standard plus integrated Warrior Lite level 2 protectors. This revolutionary concept allows riders to ride in complete safety, even if they only wear the inner protection, ideal in warm, summery conditions. Soft Shell: The middle layer is a soft shell jacket made from bi-stretch material. Light, comfortable & finely designed, this casual garment can also be worn during a break off the road. The Tech Armor can be connected to the Softshell jacket with connecting zippers & loops. Hard Shell: The fully sealed H2OUT® outer jacket uses Dermizax® Toray® to achieve the highest levels of waterproofness, breathability &... ...

SPIDI MISSION-T was developed for the highest demands of the Adventure Touring driver & presents for the first time SPIDI s own STEP-IN ARMOR technology. This jacket is the combination of three layers: Armor, Soft Shell & Hard Shell. Armor: Mission-T marks the special feature of an inner jacket with mesh layers & a certification according to Pr En 17092-3: 2017 Class A standard plus integrated Warrior Lite level 2 protectors. This revolutionary concept allows riders to ride in complete safety, even if they only wear the inner protection, ideal in warm, summery conditions. Soft Shell: The middle layer is a soft shell jacket made from bi-stretch material. Light, comfortable & finely designed, this casual garment can also be worn during a break off the road. The Tech Armor can be connected to the Softshell jacket with connecting zippers & loops. Hard Shell: The fully sealed H2OUT® outer jacket uses Dermizax® Toray® to achieve the highest levels of waterproofness, breathability & water-vapor permeability, in a laminate with an advanced membrane that delivers maximum performance. Each layer can be used as a st&-alone jacket or can be combined with the other layers in up to 6 combinations, on & off the bike. Safety Device for fastening the back protector (Level 1) A Device for fastening the back protector (Level 2) Motorcyclists protective clothing according to the regulation (UE)2016/454 PSA Personal protective equipment for motorcyclists certified according to Pr En 17092 4:2017 Class A Comfort breathable membrane inner jacket + warming inner jacket removable Waterproof outer pocket Waterproof slide fastener Water & windproof, breathable H2 Out clothing Windproof, breathable Wind Out clothing Pferformance Fixed hood ventilations Connecting system for trousers Zipper for connecting jacket & trousers 3 in 1 jacket: outer layer, H2 Out membrane plus padded lining Areas in reflex material for night detection 3M Scotchlite Removable L81 Soft Shell Integrated width adjustment ERGOFIT SYSTEM Adjustable waist closure Closures for the regulation & fixation of the protectors Adjustable drawstring for tightening Material Perforated net fabric Stretch fabric/extensible elastic multilayers High-strength polyester fabric elastic knitted waistband The best, light-reflecting material 3-ply laminate system, waterproof, windproof, water vapour permeable Tested Ratet VERY GOOD 93/100 by Motorrad & Reisen issue 106 ...

SPIDI MISSION-T was developed for the highest demands of the Adventure Touring driver & presents for the first time SPIDI s own STEP-IN ARMOR technology. This jacket is the combination of three layers: Armor, Soft Shell & Hard Shell. Armor: Mission-T marks the special feature of an inner jacket with mesh layers & a certification according to Pr En 17092-3: 2017 Class A standard plus integrated Warrior Lite level 2 protectors. This revolutionary concept allows riders to ride in complete safety, even if they only wear the inner protection, ideal in warm, summery conditions. Soft Shell: The middle layer is a soft shell jacket made from bi-stretch material. Light, comfortable & finely designed, this casual garment can also be worn during a break off the road. The Tech Armor can be connected to the Softshell jacket with connecting zippers & loops. Hard Shell: The fully sealed H2OUT® outer jacket uses Dermizax® Toray® to achieve the highest levels of waterproofness, breathability & water-vapor permeability, in a laminate with an advanced membrane that delivers maximum performance. Each layer can be used as a st&-alone jacket or can be combined with the other layers in up to 6 combinations, on & off the bike. Safety Device for fastening the back protector (Level 1) A Device for fastening the back protector (Level 2) Motorcyclists protective clothing according to the regulation (UE)2016/454 PSA Personal protective equipment for motorcyclists certified according to Pr En 17092 4:2017 Class A Comfort breathable membrane inner jacket + warming inner jacket removable Waterproof outer pocket Waterproof slide fastener Water & windproof, breathable H2 Out clothing Windproof, breathable Wind Out clothing Pferformance Fixed hood ventilations Connecting system for trousers Zipper for connecting jacket & trousers 3 in 1 jacket: outer layer, H2 Out membrane plus padded lining Areas in reflex material for night detection 3M Scotchlite Removable L81 Soft Shell Integrated width adjustment ERGOFIT SYSTEM Adjustable waist closure Closures for the regulation & fixation of the protectors Adjustable drawstring for tightening Material Perforated net fabric Stretch fabric/extensible elastic multilayers High-strength polyester fabric elastic knitted waistband The best, light-reflecting material 3-ply laminate system, waterproof, windproof, water vapour permeable Tested Ratet VERY GOOD 93/100 by Motorrad & Reisen issue 106 ...

SPIDI MISSION-T was developed for the highest demands of the Adventure Touring driver & presents for the first time SPIDI s own STEP-IN ARMOR technology. This jacket is the combination of three layers: Armor, Soft Shell & Hard Shell. Armor: Mission-T marks the special feature of an inner jacket with mesh layers & a certification according to Pr En 17092-3: 2017 Class A standard plus integrated Warrior Lite level 2 protectors. This revolutionary concept allows riders to ride in complete safety, even if they only wear the inner protection, ideal in warm, summery conditions. Soft Shell: The middle layer is a soft shell jacket made from bi-stretch material. Light, comfortable & finely designed, this casual garment can also be worn during a break off the road. The Tech Armor can be connected to the Softshell jacket with connecting zippers & loops. Hard Shell: The fully sealed H2OUT® outer jacket uses Dermizax® Toray® to achieve the highest levels of waterproofness, breathability &... ...

SPIDI Mistral H2 Out Gloves: Technical Motorcycle Glove. Safety Padding of the palm Padding on the back of the hand Upholstery of the hand outside Comfort Water & windproof, breathable H2 Out apparel Glove with padding 100 g lined Performance Touchscreen-ready finger inserts Material High strength, elastic Flex Tenax Nylon 6.6, highly abrasion resistant Punched net Polar microfleece Stretch fabric / stretch Polyurethane shield with variable density & shock absorption function Goatskin in 0, 6 / 0, 8 mm thickness, high fit result Highly resistant velor microfiber Areas in reflex material for detection at night ...

Safety PPE protective motorcycle gloves EN 13594:2015 with certified Level-1 knuckle protectors Certified protective motorcycle gear according to the (UE)2016/454 regulation Palm padding Backhand padding Side padding Material Variable-density polyurethane shield having shock absorber functions Goat leather, 0.6/ 0.8 mm thick High fitting performance Polypropylene microfiber fabric
- breathability, low specific weight, high sweat dispersion Vented leather Maintenance Do not Wash Do not bleach Do not tumble dry Line drying in the shade Do not iron Do not dry clean Do not wring
...

Safety PPE protective motorcycle gloves EN 13594:2015 with certified Level-1 knuckle protectors Certified protective motorcycle gear according to the (UE)2016/454 regulation Palm padding Backhand padding Side padding Material Variable-density polyurethane shield having shock absorber functions Goat leather, 0.6/ 0.8 mm thick High fitting performance Polypropylene microfiber fabric
- breathability, low specific weight, high sweat dispersion Vented leather Maintenance Do not Wash Do not bleach Do not tumble dry Line drying in the shade Do not iron Do not dry clean Do not wring
...

Safety PPE protective motorcycle gloves EN 13594:2015 with certified Level-1 knuckle protectors Certified protective motorcycle gear according to the (UE)2016/454 regulation Palm padding Backhand padding Side padding Material Variable-density polyurethane shield having shock absorber functions Goat leather, 0.6/ 0.8 mm thick High fitting performance Polypropylene microfiber fabric
- breathability, low specific weight, high sweat dispersion Vented leather Maintenance Do not Wash Do not bleach Do not tumble dry Line drying in the shade Do not iron Do not dry clean Do not wring
...

Safety PPE protective motorcycle gloves EN 13594:2015 with certified Level-1 knuckle protectors Certified protective motorcycle gear according to the (UE)2016/454 regulation Palm padding Backhand padding Side padding Material Variable-density polyurethane shield having shock absorber functions Goat leather, 0.6/ 0.8 mm thick High fitting performance Polypropylene microfiber fabric
- breathability, low specific weight, high sweat dispersion Vented leather Maintenance Do not Wash Do not bleach Do not tumble dry Line drying in the shade Do not iron Do not dry clean Do not wring
...

Safety PPE protective motorcycle gloves EN 13594:2015 with certified Level-1 knuckle protectors Certified protective motorcycle gear according to the (UE)2016/454 regulation Palm padding Backhand padding Side padding Material Variable-density polyurethane shield having shock absorber functions Goat leather, 0.6/ 0.8 mm thick High fitting performance Polypropylene microfiber fabric
- breathability, low specific weight, high sweat dispersion Vented leather Maintenance Do not Wash Do not bleach Do not tumble dry Line drying in the shade Do not iron Do not dry clean Do not wring
...