SHIN YO mirror vibration eliminator suitable for all mirrors with a M10 x 1.25 mm thread. As before, many motorcyclists have to fret about handlebar-mounted rearview mirrors in which the rear traffic is not visible due to vibrations. In such cases, the mirror vibration eliminators can provide relief. The vibration eliminators are simply screwed between the mirror & the vehicle dashboard.

Dimensions Diameter: 20 mm

Height: 38 mm Thread length 19 mm Thread diameter: M10 Hole depth ca.17 mm Hole diameter: M10 Variants Available in black or chrome Choose the variant that fits your vehicle: 2x right-hand thread (RH/RH) or right hand thread/left hand thread (RH/LH) 304-063
- Black, M10 x 1.25 RH-LH 304-064
- Chrome plated, M10 x 1.25 RH-LH 304-065
- Black, M10 x 1.25 2x RH-RH 304-066
- Chrome plated, M10 x 1.25 2x RH-RH Scope of delivery 1 pair of vibrators







...

SHIN YO mirror extension. Black mirror extension made from aluminum. Suitable for mirrors with M10 x 1.25 mm right & left hand thread. The screw with M10 x 1.25 mm left-hand thread is included.

Dimensions Raises the mirror by 3.5cm Widens the mirror by 40 mm to the outside Scope of delivery 2 x extension 305-130, black 2 x M10 x 1.25 mm screws right-hand thread 1 x M10 x 1.25 mm screws left-hand thread 2 x snap rings

...

SHIN YO mirror extension. Black mirror extension made from aluminum. Suitable for mirrors with M8 x 1.25 mm right & left hand thread. The screw with M8 x 1.25 mm left-hand thread is included.

Dimensions Raises the mirror by 30 mm Widens the mirror by 3.5cm to the outside Scope of delivery 2 x extension 305-131, black 2 x M8 x 1.25 mm screws right-hand thread 1 x M8 x 1.25 mm screws left-hand thread 2 x snap rings

...

SHIN YO Marano handlebar grip rubber, for 7/8 inch (22 mm) handlebars. Alu Minium ring in various colors & removable end caps for handlebar end indicators, handlebar end mirror weights, etc..

Dimensions Length: 132 mm Outer diameter rubber approx: Ø 34 mm Outer diameter aluminum sleeve: approx 45 mm Variants 315-0760
- Black/ Black 315-0762
- Black/ Red Scope of delivery 1 pair of handlebar grip rubbers



...

SHIN YO Marano handlebar grip rubber, for 7/8 inch (22 mm) handlebars. Alu Minium ring in various colors & removable end caps for handlebar end indicators, handlebar end mirror weights, etc..

Dimensions Length: 132 mm Outer diameter rubber approx: Ø 34 mm Outer diameter aluminum sleeve: approx 45 mm Variants 315-0760
- Black/ Black 315-0762
- Black/ Red Scope of delivery 1 pair of handlebar grip rubbers



...

SHIN YO MARANO-XS handlebar weights. Handlebar weights SHIN YO MARANO-XS, black, fit handlebars with an inner diameter of 12 to 22 mm. Suitable for most 7/8 inch & 1 inch aluminum, or steel handlebars.

Dimensions Handlebar weight: Ø 34.5 mm

Width: 14.8 mm Scope of delivery 1 pair of handlebar weights 161-067 2 clamping sleeves each with diameter 12 mm & 16 mm 2 spacer sleeves each with diameter 14 mm, 18 mm & 21 mm 2 x M6 central screws 2 x M6 cone nuts



...

SHIN YO LED taillight MEMPHIS. This oval tail light with unique design is open in the middle & has a LED ring. The black housing with adjustable holder is also suitable for installation. Brake & driving light function, E-approved.

Dimensions Outside: 100 x 50 mm Inside: 70 x 20 mm Connections Green = ground Yellow = driving light Blue = brake light Scope of delivery 1 piece tail light 255-670

...

SHIN YO MODUL MH-70 LED tail light, E-tested for rear. Round LED rear light for almost invisible installation on motorcycles, quads or scooters. The SHIN YO MODUL MH-70 can be installed in many positions on the vehicle & is particularly popular for conversions where tail lights should not be visible or simply have no space. Noble look & thanks to 2 bright SMD LEDs unmissable.

Dimensions Diameter: 30 mm

Depth: 20 mm Cable length 500 mm Voltage: 12V Connections Red = brake light (+) White = tail light (+) Black = Ground (-) Scope of delivery 1 piece tail light 255-276



...

SHIN YO MODUL MH-70 LED turn signal, E-tested for front & rear. Round LED built-in turn signal for almost invisible installation on motorcycle, quad or scooter. The SHIN YO MODUL MH-70 can be installed in many positions on the vehicle & is particularly popular for conversions where turn signals should not be visible or simply have no place. Noble look with tinted reflector & thanks to bright LEDs unmissable.

Dimensions Diameter: 30 mm

Depth: 20 mm Cable length 400 mm Connections Power consumption: 12V, 3W Yellow = turn signal (+) Black = Ground (-) Scope of delivery 1 pair of turn signal 204-275



...

SHIN YO Turn Signal Micro Bullet Groove. Mini turn signal in a shapely classic design, with milled holes in the aluminum housing & yellow glass, E-approved.

Dimensions Approx. 29 x 75 mm Threaded bolt: M10 Illuminant: 12V 21W BAY9S Variants 203-113
- Chrome Orange 203-117
- Black Orange Scope of delivery 1 pair of turn signals



...