The Sand 4 H2O gloves have been created specifically for riding on or off-road during unstable weather conditions in spring, summer, or fall. A waterproof & breathable Hydratex® Z-liner is what keeps hands dry when the rain won t stop. Stretch material is used on the top of the gloves to increase flexibility & freedom of movement of the hands while using the controls of your bike. The Sand 4 H2O features a new TPR knuckle protector, designed especially for this glove. Additional protection is provided by TPR sliders on the fingers, thumb & palm. Extra reflection is added on the gloves for increased visibility during inclement weather conditions or night-time riding. They include a rugged pull tab on the cuff making it easy to put them on, & securing them in place is also effortless because of the hook-&-loop closure followed by the hook-&-loop wrist strap. The Connect Finger Tip is also included. Features Adjustment strap at wrist
- The hook-&-loop adjustment strap at the wrist allows for optimum adjustability & fit when using our gloves. Find the ideal tightness & comfort every time it is used. Adjustment tab at cuff Regular cuff Hook-&-loop closure Stretch fabric on back of hand Stretch lips at fingers Connect Finger Tip
- Never take off your gloves again to answer your phone or navigation system. The connect fingertip has been specifically designed to operate touch screens. Grip panel at palm
- This part gives you extra grip for ultimate control. It also protects the leather from wear & tear. Pull tab Visor wiper
- The material used on the index finger of the glove has a visor wipe function. It helps clear water or moisture off the visor for better visibility when riding in wet weather. Reflection at back of hand Reflective stretch lips at fingers These gloves are certified according to the EN 13594 Standard, published in 2015 & have achieved level 1 KP rating. Outer garment Hydratex® Z-liner with Mc Fit® technology Cowhide
- Cowhide has been used in this garment for optimal fit & protection. Goatskin
- Tanned leather made from goatskin is considered extremely durable, & is often used for gloves & other products that require a soft hide. PWR Aramid stretch PWR Shell 500D stretch
- Consisting of 100% high-performance polyamide yarns, PWR Shell 500D stretch takes the best properties of a nylon with a high melting point, tremendous tear & abrasion-resistance, & excellent durability & then puts the unique REV’IT! design stamp on it. This PWRShell fabric comes in a stretch variant. The 500D indicates the density of the fabric. The higher the number the better the abrasion & tear resistance properties are. Suede leather with WR finish Lining Tri-fleece liner
- This polyester tricot fabric is used for glove lining, & brushed to provide extra warmth without adding any bulk. The lining wicks moisture away, to prevent hands from getting damp. Protection PWR Shield at palm
- PWR Shield is created with a unique knit technique which results in a fabric with unsurpassed cut, tear & abrasion resistance levels. Temperfoam® finger knuckles
- The self-contouring foam is used in areas where mobility & fit are a must, like the finger knuckles. Temperfoam® comes in a solid version as well as a perforated version. TPR finger knuckles TPR palm slider TPU hard shell knuckle









...

The Sand 4 H2O gloves have been created specifically for riding on or off-road during unstable weather conditions in spring, summer, or fall. A waterproof & breathable Hydratex® Z-liner is what keeps hands dry when the rain won t stop. Stretch material is used on the top of the gloves to increase flexibility & freedom of movement of the hands while using the controls of your bike. The Sand 4 H2O features a new TPR knuckle protector, designed especially for this glove. Additional protection is provided by TPR sliders on the fingers, thumb & palm. Extra reflection is added on the gloves for increased visibility during inclement weather conditions or night-time riding. They include a rugged pull tab on the cuff making it easy to put them on, & securing them in place is also effortless because of the hook-&-loop closure followed by the hook-&-loop wrist strap. The Connect Finger Tip is also included. Features Adjustment strap at wrist
- The hook-&-loop adjustment strap at the wrist allows for optimum adjustability & fit when using our gloves. Find the ideal tightness & comfort every time it is used. Adjustment tab at cuff Regular cuff Hook-&-loop closure Stretch fabric on back of hand Stretch lips at fingers Connect Finger Tip
- Never take off your gloves again to answer your phone or navigation system. The connect fingertip has been specifically designed to operate touch screens. Grip panel at palm
- This part gives you extra grip for ultimate control. It also protects the leather from wear & tear. Pull tab Visor wiper
- The material used on the index finger of the glove has a visor wipe function. It helps clear water or moisture off the visor for better visibility when riding in wet weather. Reflection at back of hand Reflective stretch lips at fingers These gloves are certified according to the EN 13594 Standard, published in 2015 & have achieved level 1 KP rating. Outer garment Hydratex® Z-liner with Mc Fit® technology Cowhide
- Cowhide has been used in this garment for optimal fit & protection. Goatskin
- Tanned leather made from goatskin is considered extremely durable, & is often used for gloves & other products that require a soft hide. PWR Aramid stretch PWR Shell 500D stretch
- Consisting of 100% high-performance polyamide yarns, PWR Shell 500D stretch takes the best properties of a nylon with a high melting point, tremendous tear & abrasion-resistance, & excellent durability & then puts the unique REV’IT! design stamp on it. This PWRShell fabric comes in a stretch variant. The 500D indicates the density of the fabric. The higher the number the better the abrasion & tear resistance properties are. Suede leather with WR finish Lining Tri-fleece liner
- This polyester tricot fabric is used for glove lining, & brushed to provide extra warmth without adding any bulk. The lining wicks moisture away, to prevent hands from getting damp. Protection PWR Shield at palm
- PWR Shield is created with a unique knit technique which results in a fabric with unsurpassed cut, tear & abrasion resistance levels. Temperfoam® finger knuckles
- The self-contouring foam is used in areas where mobility & fit are a must, like the finger knuckles. Temperfoam® comes in a solid version as well as a perforated version. TPR finger knuckles TPR palm slider TPU hard shell knuckle









...

The Sand 4 H2O gloves have been created specifically for riding on or off-road during unstable weather conditions in spring, summer, or fall. A waterproof & breathable Hydratex® Z-liner is what keeps hands dry when the rain won t stop. Stretch material is used on the top of the gloves to increase flexibility & freedom of movement of the hands while using the controls of your bike. The Sand 4 H2O features a new TPR knuckle protector, designed especially for this glove. Additional protection is provided by TPR sliders on the fingers, thumb & palm. Extra reflection is added on the gloves for increased visibility during inclement weather conditions or night-time riding. They include a rugged pull tab on the cuff making it easy to put them on, & securing them in place is also effortless because of the hook-&-loop closure followed by the hook-&-loop wrist strap. The Connect Finger Tip is also included. Features Adjustment strap at wrist
- The hook-&-loop adjustment strap at the wrist allows for optimum adjustability & fit when using our gloves. Find the ideal tightness & comfort every time it is used. Adjustment tab at cuff Regular cuff Hook-&-loop closure Stretch fabric on back of hand Stretch lips at fingers Connect Finger Tip
- Never take off your gloves again to answer your phone or navigation system. The connect fingertip has been specifically designed to operate touch screens. Grip panel at palm
- This part gives you extra grip for ultimate control. It also protects the leather from wear & tear. Pull tab Visor wiper
- The material used on the index finger of the glove has a visor wipe function. It helps clear water or moisture off the visor for better visibility when riding in wet weather. Reflection at back of hand Reflective stretch lips at fingers These gloves are certified according to the EN 13594 Standard, published in 2015 & have achieved level 1 KP rating. Outer garment Hydratex® Z-liner with Mc Fit® technology Cowhide
- Cowhide has been used in this garment for optimal fit & protection. Goatskin
- Tanned leather made from goatskin is considered extremely durable, & is often used for gloves & other products that require a soft hide. PWR Aramid stretch PWR Shell 500D stretch
- Consisting of 100% high-performance polyamide yarns, PWR Shell 500D stretch takes the best properties of a nylon with a high melting point, tremendous tear & abrasion-resistance, & excellent durability & then puts the unique REV’IT! design stamp on it. This PWRShell fabric comes in a stretch variant. The 500D indicates the density of the fabric. The higher the number the better the abrasion & tear resistance properties are. Suede leather with WR finish Lining Tri-fleece liner
- This polyester tricot fabric is used for glove lining, & brushed to provide extra warmth without adding any bulk. The lining wicks moisture away, to prevent hands from getting damp. Protection PWR Shield at palm
- PWR Shield is created with a unique knit technique which results in a fabric with unsurpassed cut, tear & abrasion resistance levels. Temperfoam® finger knuckles
- The self-contouring foam is used in areas where mobility & fit are a must, like the finger knuckles. Temperfoam® comes in a solid version as well as a perforated version. TPR finger knuckles TPR palm slider TPU hard shell knuckle









...

The Sand 4 H2O gloves have been created specifically for riding on or off-road during unstable weather conditions in spring, summer, or fall. A waterproof & breathable Hydratex® Z-liner is what keeps hands dry when the rain won t stop. Stretch material is used on the top of the gloves to increase flexibility & freedom of movement of the hands while using the controls of your bike. The Sand 4 H2O features a new TPR knuckle protector, designed especially for this glove. Additional protection is provided by TPR sliders on the fingers, thumb & palm. Extra reflection is added on the gloves for increased visibility during inclement weather conditions or night-time riding. They include a rugged pull tab on the cuff making it easy to put them on, & securing them in place is also effortless because of the hook-&-loop closure followed by the hook-&-loop wrist strap. The Connect Finger Tip is also included. Features Adjustment strap at wrist
- The hook-&-loop adjustment strap at the wrist allows for optimum adjustability & fit when using our gloves. Find the ideal tightness & comfort every time it is used. Adjustment tab at cuff Regular cuff Hook-&-loop closure Stretch fabric on back of hand Stretch lips at fingers Connect Finger Tip
- Never take off your gloves again to answer your phone or navigation system. The connect fingertip has been specifically designed to operate touch screens. Grip panel at palm
- This part gives you extra grip for ultimate control. It also protects the leather from wear & tear. Pull tab Visor wiper
- The material used on the index finger of the glove has a visor wipe function. It helps clear water or moisture off the visor for better visibility when riding in wet weather. Reflection at back of hand Reflective stretch lips at fingers These gloves are certified according to the EN 13594 Standard, published in 2015 & have achieved level 1 KP rating. Outer garment Hydratex® Z-liner with Mc Fit® technology Cowhide
- Cowhide has been used in this garment for optimal fit & protection. Goatskin
- Tanned leather made from goatskin is considered extremely durable, & is often used for gloves & other products that require a soft hide. PWR Aramid stretch PWR Shell 500D stretch
- Consisting of 100% high-performance polyamide yarns, PWR Shell 500D stretch takes the best properties of a nylon with a high melting point, tremendous tear & abrasion-resistance, & excellent durability & then puts the unique REV’IT! design stamp on it. This PWRShell fabric comes in a stretch variant. The 500D indicates the density of the fabric. The higher the number the better the abrasion & tear resistance properties are. Suede leather with WR finish Lining Tri-fleece liner
- This polyester tricot fabric is used for glove lining, & brushed to provide extra warmth without adding any bulk. The lining wicks moisture away, to prevent hands from getting damp. Protection PWR Shield at palm
- PWR Shield is created with a unique knit technique which results in a fabric with unsurpassed cut, tear & abrasion resistance levels. Temperfoam® finger knuckles
- The self-contouring foam is used in areas where mobility & fit are a must, like the finger knuckles. Temperfoam® comes in a solid version as well as a perforated version. TPR finger knuckles TPR palm slider TPU hard shell knuckle









...

The Sand 4 H2O gloves have been created specifically for riding on or off-road during unstable weather conditions in spring, summer, or fall. A waterproof & breathable Hydratex® Z-liner is what keeps hands dry when the rain won t stop. Stretch material is used on the top of the gloves to increase flexibility & freedom of movement of the hands while using the controls of your bike. The Sand 4 H2O features a new TPR knuckle protector, designed especially for this glove. Additional protection is provided by TPR sliders on the fingers, thumb & palm. Extra reflection is added on the gloves for increased visibility during inclement weather conditions or night-time riding. They include a rugged pull tab on the cuff making it easy to put them on, & securing them in place is also effortless because of the hook-&-loop closure followed by the hook-&-loop wrist strap. The Connect Finger Tip is also included. Features Adjustment strap at wrist
- The hook-&-loop adjustment strap at the wrist allows for optimum adjustability & fit when using our gloves. Find the ideal tightness & comfort every time it is used. Adjustment tab at cuff Regular cuff Hook-&-loop closure Stretch fabric on back of hand Stretch lips at fingers Connect Finger Tip
- Never take off your gloves again to answer your phone or navigation system. The connect fingertip has been specifically designed to operate touch screens. Grip panel at palm
- This part gives you extra grip for ultimate control. It also protects the leather from wear & tear. Pull tab Visor wiper
- The material used on the index finger of the glove has a visor wipe function. It helps clear water or moisture off the visor for better visibility when riding in wet weather. Reflection at back of hand Reflective stretch lips at fingers These gloves are certified according to the EN 13594 Standard, published in 2015 & have achieved level 1 KP rating. Outer garment Hydratex® Z-liner with Mc Fit® technology Cowhide
- Cowhide has been used in this garment for optimal fit & protection. Goatskin
- Tanned leather made from goatskin is considered extremely durable, & is often used for gloves & other products that require a soft hide. PWR Aramid stretch PWR Shell 500D stretch
- Consisting of 100% high-performance polyamide yarns, PWR Shell 500D stretch takes the best properties of a nylon with a high melting point, tremendous tear & abrasion-resistance, & excellent durability & then puts the unique REV’IT! design stamp on it. This PWRShell fabric comes in a stretch variant. The 500D indicates the density of the fabric. The higher the number the better the abrasion & tear resistance properties are. Suede leather with WR finish Lining Tri-fleece liner
- This polyester tricot fabric is used for glove lining, & brushed to provide extra warmth without adding any bulk. The lining wicks moisture away, to prevent hands from getting damp. Protection PWR Shield at palm
- PWR Shield is created with a unique knit technique which results in a fabric with unsurpassed cut, tear & abrasion resistance levels. Temperfoam® finger knuckles
- The self-contouring foam is used in areas where mobility & fit are a must, like the finger knuckles. Temperfoam® comes in a solid version as well as a perforated version. TPR finger knuckles TPR palm slider TPU hard shell knuckle









...

The Sand 4 H2O gloves have been created specifically for riding on or off-road during unstable weather conditions in spring, summer, or fall. A waterproof & breathable Hydratex® Z-liner is what keeps hands dry when the rain won t stop. Stretch material is used on the top of the gloves to increase flexibility & freedom of movement of the hands while using the controls of your bike. The Sand 4 H2O features a new TPR knuckle protector, designed especially for this glove. Additional protection is provided by TPR sliders on the fingers, thumb & palm. Extra reflection is added on the gloves for increased visibility during inclement weather conditions or night-time riding. They include a rugged pull tab on the cuff making it easy to put them on, & securing them in place is also effortless because of the hook-&-loop closure followed by the hook-&-loop wrist strap. The Connect Finger Tip is also included. Features Adjustment strap at wrist
- The hook-&-loop adjustment strap at the wrist allows for optimum adjustability & fit when using our gloves. Find the ideal tightness & comfort every time it is used. Adjustment tab at cuff Regular cuff Hook-&-loop closure Stretch fabric on back of hand Stretch lips at fingers Connect Finger Tip
- Never take off your gloves again to answer your phone or navigation system. The connect fingertip has been specifically designed to operate touch screens. Grip panel at palm
- This part gives you extra grip for ultimate control. It also protects the leather from wear & tear. Pull tab Visor wiper
- The material used on the index finger of the glove has a visor wipe function. It helps clear water or moisture off the visor for better visibility when riding in wet weather. Reflection at back of hand Reflective stretch lips at fingers These gloves are certified according to the EN 13594 Standard, published in 2015 & have achieved level 1 KP rating. Outer garment Hydratex® Z-liner with Mc Fit® technology Cowhide
- Cowhide has been used in this garment for optimal fit & protection. Goatskin
- Tanned leather made from goatskin is considered extremely durable, & is often used for gloves & other products that require a soft hide. PWR Aramid stretch PWR Shell 500D stretch
- Consisting of 100% high-performance polyamide yarns, PWR Shell 500D stretch takes the best properties of a nylon with a high melting point, tremendous tear & abrasion-resistance, & excellent durability & then puts the unique REV’IT! design stamp on it. This PWRShell fabric comes in a stretch variant. The 500D indicates the density of the fabric. The higher the number the better the abrasion & tear resistance properties are. Suede leather with WR finish Lining Tri-fleece liner
- This polyester tricot fabric is used for glove lining, & brushed to provide extra warmth without adding any bulk. The lining wicks moisture away, to prevent hands from getting damp. Protection PWR Shield at palm
- PWR Shield is created with a unique knit technique which results in a fabric with unsurpassed cut, tear & abrasion resistance levels. Temperfoam® finger knuckles
- The self-contouring foam is used in areas where mobility & fit are a must, like the finger knuckles. Temperfoam® comes in a solid version as well as a perforated version. TPR finger knuckles TPR palm slider TPU hard shell knuckle









...

The Sand 4 H2O gloves have been created specifically for riding on or off-road during unstable weather conditions in spring, summer, or fall. A waterproof & breathable Hydratex® Z-liner is what keeps hands dry when the rain won t stop. Stretch material is used on the top of the gloves to increase flexibility & freedom of movement of the hands while using the controls of your bike. The Sand 4 H2O features a new TPR knuckle protector, designed especially for this glove. Additional protection is provided by TPR sliders on the fingers, thumb & palm. Extra reflection is added on the gloves for increased visibility during inclement weather conditions or night-time riding. They include a rugged pull tab on the cuff making it easy to put them on, & securing them in place is also effortless because of the hook-&-loop closure followed by the hook-&-loop wrist strap. The Connect Finger Tip is also included. Features Adjustment strap at wrist
- The hook-&-loop adjustment strap at the wrist allows for optimum adjustability & fit when using our gloves. Find the ideal tightness & comfort every time it is used. Adjustment tab at cuff Regular cuff Hook-&-loop closure Stretch fabric on back of hand Stretch lips at fingers Connect Finger Tip
- Never take off your gloves again to answer your phone or navigation system. The connect fingertip has been specifically designed to operate touch screens. Grip panel at palm
- This part gives you extra grip for ultimate control. It also protects the leather from wear & tear. Pull tab Visor wiper
- The material used on the index finger of the glove has a visor wipe function. It helps clear water or moisture off the visor for better visibility when riding in wet weather. Reflection at back of hand Reflective stretch lips at fingers These gloves are certified according to the EN 13594 Standard, published in 2015 & have achieved level 1 KP rating. Outer garment Hydratex® Z-liner with Mc Fit® technology Cowhide
- Cowhide has been used in this garment for optimal fit & protection. Goatskin
- Tanned leather made from goatskin is considered extremely durable, & is often used for gloves & other products that require a soft hide. PWR Aramid stretch PWR Shell 500D stretch
- Consisting of 100% high-performance polyamide yarns, PWR Shell 500D stretch takes the best properties of a nylon with a high melting point, tremendous tear & abrasion-resistance, & excellent durability & then puts the unique REV’IT! design stamp on it. This PWRShell fabric comes in a stretch variant. The 500D indicates the density of the fabric. The higher the number the better the abrasion & tear resistance properties are. Suede leather with WR finish Lining Tri-fleece liner
- This polyester tricot fabric is used for glove lining, & brushed to provide extra warmth without adding any bulk. The lining wicks moisture away, to prevent hands from getting damp. Protection PWR Shield at palm
- PWR Shield is created with a unique knit technique which results in a fabric with unsurpassed cut, tear & abrasion resistance levels. Temperfoam® finger knuckles
- The self-contouring foam is used in areas where mobility & fit are a must, like the finger knuckles. Temperfoam® comes in a solid version as well as a perforated version. TPR finger knuckles TPR palm slider TPU hard shell knuckle









...

The Sand 4 H2O gloves have been created specifically for riding on or off-road during unstable weather conditions in spring, summer, or fall. A waterproof & breathable Hydratex® Z-liner is what keeps hands dry when the rain won t stop. Stretch material is used on the top of the gloves to increase flexibility & freedom of movement of the hands while using the controls of your bike. The Sand 4 H2O features a new TPR knuckle protector, designed especially for this glove. Additional protection is provided by TPR sliders on the fingers, thumb & palm. Extra reflection is added on the gloves for increased visibility during inclement weather conditions or night-time riding. They include a rugged pull tab on the cuff making it easy to put them on, & securing them in place is also effortless because of the hook-&-loop closure followed by the hook-&-loop wrist strap. The Connect Finger Tip is also included. Features Adjustment strap at wrist
- The hook-&-loop adjustment strap at the wrist allows for optimum adjustability & fit when using our gloves. Find the ideal tightness & comfort every time it is used. Adjustment tab at cuff Regular cuff Hook-&-loop closure Stretch fabric on back of hand Stretch lips at fingers Connect Finger Tip
- Never take off your gloves again to answer your phone or navigation system. The connect fingertip has been specifically designed to operate touch screens. Grip panel at palm
- This part gives you extra grip for ultimate control. It also protects the leather from wear & tear. Pull tab Visor wiper
- The material used on the index finger of the glove has a visor wipe function. It helps clear water or moisture off the visor for better visibility when riding in wet weather. Reflection at back of hand Reflective stretch lips at fingers These gloves are certified according to the EN 13594 Standard, published in 2015 & have achieved level 1 KP rating. Outer garment Hydratex® Z-liner with Mc Fit® technology Cowhide
- Cowhide has been used in this garment for optimal fit & protection. Goatskin
- Tanned leather made from goatskin is considered extremely durable, & is often used for gloves & other products that require a soft hide. PWR Aramid stretch PWR Shell 500D stretch
- Consisting of 100% high-performance polyamide yarns, PWR Shell 500D stretch takes the best properties of a nylon with a high melting point, tremendous tear & abrasion-resistance, & excellent durability & then puts the unique REV’IT! design stamp on it. This PWRShell fabric comes in a stretch variant. The 500D indicates the density of the fabric. The higher the number the better the abrasion & tear resistance properties are. Suede leather with WR finish Lining Tri-fleece liner
- This polyester tricot fabric is used for glove lining, & brushed to provide extra warmth without adding any bulk. The lining wicks moisture away, to prevent hands from getting damp. Protection PWR Shield at palm
- PWR Shield is created with a unique knit technique which results in a fabric with unsurpassed cut, tear & abrasion resistance levels. Temperfoam® finger knuckles
- The self-contouring foam is used in areas where mobility & fit are a must, like the finger knuckles. Temperfoam® comes in a solid version as well as a perforated version. TPR finger knuckles TPR palm slider TPU hard shell knuckle









...

For many years, the Sand outfit has been the go-to choice for riders looking for a rugged & versatile jacket & pants combination that is fully prepared to take on any challenging adventure on- or off-road. Hot, wet, or cold weather will not stop you from reaching your destination, wherever the road may lead you. This jacket will take you anywhere in style & total comfort. Meet the 4th generation of this iconic piece. Meet the Sand 4 H2O jacket. The tough yet lightweight, abrasion-resistant outer shell is engineered to last a multitude of around-the-world trips & is designed to provide excellent freedom of movement for the most demanding & technical riding situations. For maximum impact protection, the Sand 4 H2O

Includes:: REV IT! s award-winning, industry-leading SEEFLEX™ Level 2 protectors at the shoulders & elbows. It also comes prepared for the optional & equally impressive SEESOFT™ Level 2 insert back protector. You’re ready to tackle any challenge with this jacket. When REV IT! says the Sand 4 H2O jacket is versatile, we mean that it is prepared for any climate you might encounter, & that it means that you can configure it in the best possible way to ensure maximum comfort. Every layer is removable & wearable separately, from the waterproof Hydratex® membrane to the insulated winter lining. Changing seasons or weather conditions won’t deter you from getting on your bike, you are prepared. Multiple adjustment straps & tabs on the arms, & variable height adjustment straps at the waist will ensure the perfect fit to your body with or without the liners installed. If you are looking for airflow, this jacket has plenty of options that allow you to regulate the amount of wind that blows towards your body. It features 3 ventilation panels on the front, 4 ventilation zippers on the arms, & 2 exhaust vents zipper on the back. The 2 front pockets, big rear pocket, & 2 inner pockets provide ample storage space, so you can bring all your essentials along for the ride & keep them close. The rear pocket is even large enough to store the liners when not in use. All the outside pockets can be closed with zippers to make sure you won’t lose your valuable possessions during the ride. Durable, versatile, & practical. The highest specifications regarding tear, cut & abrasion-resistance & top-notch impact armor. The Sand 4 H2O jacket has it all & is ready for your next ride around the world. Features Tour fit Adjustment drawcord at hem Adjustment strap at lower arm Adjustment tab at cuffs Adjustment tab at upper arm Variable height adjustment straps at waist Flexisnap at collar
- The REV’IT! flexisnap makes it possible to adjust the collar circumference easily & personalize its fit to each rider. A jacket is often worn in more then one season, & the flexisnap makes it possible to adjust the collar within seconds. During winter a wider collar circumference accommodates combining the jacket with a balaclava or wind collar, while during summer, a wider circumference lets an all-important cooling wind into the collar. Soft edge at collar For extra comfort, the inside of the collar is covered with a soft fabric. Inner pocket within thermal liner
- The internal pocket within the thermal liner allows for additional storage & for riders to keep personal items close. Two inner pockets Two waterproof stash pockets at waist Waterproof inner pocket within waterproof liner
- The internal pocket within the waterproof liner is waterproof. Waterproof stash pocket on back Long connection zipper Short connection zipper Short connection zipper in detachable waterproof liner
- Adding to the versatility of the waterproof detachable liner, it comes with a short connection zipper, allowing you to securely fasten it to your riding trousers (or jeans via the Safeway 2 belts), when possible. Prepared for vest connector NEON
- The Vest connector NEON means that you can the upgrade your jacket with a vest that quickly & easily attaches. The highly visible vest offers enhanced safety. Two-way Collar Snap Closure System Laminated reflection on back
- Reflection panels ensure excellent visibility at all angles, allowing the wearer to be seen from all directions. To offer a more sophisticated look, the reflection panels are welded to the fabric. This welding process also eliminates stitching seams, making the garments safer. Laminated reflection at chest Laminated reflection at upper arms This garment is certified according to the EN 17092 Standard, published in 2020 & has achieved AA rating. Ventilation Ventilation panels on chest
- The ventilation panels on this garment allow for optimal airflow to keep the body cool while riding. XL zippers on sleeves Zipper at center front Zipper at upper back Outer garment 3D Air Mesh Polyester Ripstop Insulation Detachable Hydratex® 3L, wearable separately Detachable thermal liner Lining 3D air mesh
- This knitted fabric has an open, 3-dimensional structure that ensures good ventilation while riding. 3D air mesh is a must-have for long touring riders. Protection Prepared for 2-pcs. chest Protector SEESOFT™ Level 1 DC-L1-B Prepared for SEESOFT™ Level 2 back protector insert
- Type RV SEEFLEX™ Level 2 elbow Protectors RV10-L2-B SEEFLEX™ Level 2 shoulder Protectors RV13-L2-B Adjustable elbow protection
- The adjustable elbow protection pockets allow you to tailor the certified elbow protection to three different heights to perfectly fit your body & for highest comfort while riding. Prepared for REV’IT! Segur neck brace











...

For many years, the Sand outfit has been the go-to choice for riders looking for a rugged & versatile jacket & pants combination that is fully prepared to take on any challenging adventure on- or off-road. Hot, wet, or cold weather will not stop you from reaching your destination, wherever the road may lead you. This jacket will take you anywhere in style & total comfort. Meet the 4th generation of this iconic piece. Meet the Sand 4 H2O jacket. The tough yet lightweight, abrasion-resistant outer shell is engineered to last a multitude of around-the-world trips & is designed to provide excellent freedom of movement for the most demanding & technical riding situations. For maximum impact protection, the Sand 4 H2O

Includes:: REV IT! s award-winning, industry-leading SEEFLEX™ Level 2 protectors at the shoulders & elbows. It also comes prepared for the optional & equally impressive SEESOFT™ Level 2 insert back protector. You’re ready to tackle any challenge with this jacket. When REV IT! says the Sand 4 H2O jacket is versatile, we mean that it is prepared for any climate you might encounter, & that it means that you can configure it in the best possible way to ensure maximum comfort. Every layer is removable & wearable separately, from the waterproof Hydratex® membrane to the insulated winter lining. Changing seasons or weather conditions won’t deter you from getting on your bike, you are prepared. Multiple adjustment straps & tabs on the arms, & variable height adjustment straps at the waist will ensure the perfect fit to your body with or without the liners installed. If you are looking for airflow, this jacket has plenty of options that allow you to regulate the amount of wind that blows towards your body. It features 3 ventilation panels on the front, 4 ventilation zippers on the arms, & 2 exhaust vents zipper on the back. The 2 front pockets, big rear pocket, & 2 inner pockets provide ample storage space, so you can bring all your essentials along for the ride & keep them close. The rear pocket is even large enough to store the liners when not in use. All the outside pockets can be closed with zippers to make sure you won’t lose your valuable possessions during the ride. Durable, versatile, & practical. The highest specifications regarding tear, cut & abrasion-resistance & top-notch impact armor. The Sand 4 H2O jacket has it all & is ready for your next ride around the world. Features Tour fit Adjustment drawcord at hem Adjustment strap at lower arm Adjustment tab at cuffs Adjustment tab at upper arm Variable height adjustment straps at waist Flexisnap at collar
- The REV’IT! flexisnap makes it possible to adjust the collar circumference easily & personalize its fit to each rider. A jacket is often worn in more then one season, & the flexisnap makes it possible to adjust the collar within seconds. During winter a wider collar circumference accommodates combining the jacket with a balaclava or wind collar, while during summer, a wider circumference lets an all-important cooling wind into the collar. Soft edge at collar For extra comfort, the inside of the collar is covered with a soft fabric. Inner pocket within thermal liner
- The internal pocket within the thermal liner allows for additional storage & for riders to keep personal items close. Two inner pockets Two waterproof stash pockets at waist Waterproof inner pocket within waterproof liner
- The internal pocket within the waterproof liner is waterproof. Waterproof stash pocket on back Long connection zipper Short connection zipper Short connection zipper in detachable waterproof liner
- Adding to the versatility of the waterproof detachable liner, it comes with a short connection zipper, allowing you to securely fasten it to your riding trousers (or jeans via the Safeway 2 belts), when possible. Prepared for vest connector NEON
- The Vest connector NEON means that you can the upgrade your jacket with a vest that quickly & easily attaches. The highly visible vest offers enhanced safety. Two-way Collar Snap Closure System Laminated reflection on back
- Reflection panels ensure excellent visibility at all angles, allowing the wearer to be seen from all directions. To offer a more sophisticated look, the reflection panels are welded to the fabric. This welding process also eliminates stitching seams, making the garments safer. Laminated reflection at chest Laminated reflection at upper arms This garment is certified according to the EN 17092 Standard, published in 2020 & has achieved AA rating. Ventilation Ventilation panels on chest
- The ventilation panels on this garment allow for optimal airflow to keep the body cool while riding. XL zippers on sleeves Zipper at center front Zipper at upper back Outer garment 3D Air Mesh Polyester Ripstop Insulation Detachable Hydratex® 3L, wearable separately Detachable thermal liner Lining 3D air mesh
- This knitted fabric has an open, 3-dimensional structure that ensures good ventilation while riding. 3D air mesh is a must-have for long touring riders. Protection Prepared for 2-pcs. chest Protector SEESOFT™ Level 1 DC-L1-B Prepared for SEESOFT™ Level 2 back protector insert
- Type RV SEEFLEX™ Level 2 elbow Protectors RV10-L2-B SEEFLEX™ Level 2 shoulder Protectors RV13-L2-B Adjustable elbow protection
- The adjustable elbow protection pockets allow you to tailor the certified elbow protection to three different heights to perfectly fit your body & for highest comfort while riding. Prepared for REV’IT! Segur neck brace











...