The Force vest is an ideal solution for anyone who wants to wear a back protector separately, yet in a stylish way. The vest comes standard with a SEESOFT™ level 2 back protector insert installed, which is cleverly disguised as a fashionable accessory to anyone s motorcycle wardrobe. Achieved through strong PWR Shell & 3D air mesh, the Force vest looks like a stylish thermal vest while allowing air to reach the upper body. Thanks to the stretchable panels on the side, the Force can be worn closely without having to sacrifice comfort. Features 3D air mesh PWRshell 750D PWRshell stretch SEESOFT™ level 2 back protector insert – type RV laminated reflection partly perforated outer shell stretchable side panels elastic binding at armhole protective cover at front zipper stash pockets Fit city fit regular ...

The long-cuffed Foster H2O gloves were designed to complement the Trafalgar H2O jacket. These urban waterproof gloves have both a softshell & goatskin exterior. Hands are protected via the soft knuckle & PWRShield at the palm, while they stay warm thanks to an included high loft fur liner. A fixed hydratex membrane makes it waterproof & breathable & suitable for urban rides in colder weather. Hands can move freely because of the incorporated stretch. Outer garment Softshell 3L goatskin drum dyed flock PU connect finger tip fabric synthetic PU leather Insulation fleece high loft fur liner Lining tri-fleece liner Waterproofing & Breathability hydratex®Z-liner Protection visco-elastic knuckle PWRshield at Palm Temperfoam® palm slider Adjustability Adjustment strap at wrist Hook & loop adjustment tab Other Features connect finger tip regular cuff ...

The long-cuffed Foster H2O gloves were designed to complement the Trafalgar H2O jacket. These urban waterproof gloves have both a softshell & goatskin exterior. Hands are protected via the soft knuckle & PWRShield at the palm, while they stay warm thanks to an included high loft fur liner. A fixed hydratex membrane makes it waterproof & breathable & suitable for urban rides in colder weather. Hands can move freely because of the incorporated stretch. Outer garment Softshell 3L goatskin drum dyed flock PU connect finger tip fabric synthetic PU leather Insulation fleece high loft fur liner Lining tri-fleece liner Waterproofing & Breathability hydratex®Z-liner Protection visco-elastic knuckle PWRshield at Palm Temperfoam® palm slider Adjustability Adjustment strap at wrist Hook & loop adjustment tab Other Features connect finger tip regular cuff ...

The heated Freedom H2O motorcycle glove REV IT! has given a sleek & stylish look & a fine feel, & of course the THERMOTRONIC high-tech system that keeps your hands at the ideal temperature of about 33 degrees Celsius regardless of weather conditions such as wind, humidity & cold. The THERMOTRONIC has four different heat levels (from low to high), which can be easily adjusted with the large button on the upper part of the glove. Thanks to the colored ring around the knob, it is very easy to see which heat level is currently applied. The exterior of the glove is made from flexible softshell material on the upper hand & grippy leather on the palm. The synthetic lining is combined with Exkin® Platinum® insulation for a definite feeling of comfort & protection from the cold right away. By using a soft knuckle shell gloves is very comfortable to wear, but still delivers plenty of safety. The hydratex Z-Liner construction guarantees one hundred percent waterproofness. Furthermore, reflective stripes & logos are found on the top of the hand to increase your visibility without disturbing the clean & fresh look glove. Not to mention the conductive fingertip. With it you can operate touchscreens without having to take off the glove, a great advantage in cold weather. The Freedom H2O motorcycle glove takes the winter its fright. Features Battery pack with REV IT! Thermotronic heating technology, set with two 7.4 V batteries & micro USB (Universal Serial Bus) cable With soft knuckle protection Temperfoam® palm grinder Exkin® Platinum® optimal insulation Adjustable wrist strap Stretch fabric on the fingers Elastic drawstring on the cuff Closure at wrist strap Conductive fabric on index finger Conductive fabric on the thumbs Long cuffs Visor wiper These gloves are certified according to EN 13594 standard, published in 2015 & meet the protection standard Level-1 Heating Features Heating System: Fixed REV’IT! Thermotronic heating technology system Mode 1: 25% – White – Eco – 375 minutes (6.25 hrs) Mode 2: 50% – Yellow – Medium – 300 minutes (5 hrs) Mode 3: 75% – Orange – High – 225 minutes (3.75 hrs) Mode 4: 100% – Red – Boost – 150 minutes (2.5 hrs) Charge Time: 4-5 hours using wall charger Tri-Fleece Lining This tricot polyester fabric is used as a glove lining & brushed to provide better insulation without adding thickness. The lining pulls moisture away to keep hands dry. High-Loft Fur Lining This type of insulation mimics the natural insulating properties of an animal fur: The structure of high-loft fibers stores more air than normal fibers, this natural insulation traps heat. Conductive fabric at the fingertips Take off your gloves to operate your navigation system or smartphone? No longer necessary thanks to the conductive fingertips specially designed for touchscreens. Viscoelastic knuckle These knuckle protectors are made from viscoelastic rubber. The protects your knuckles from impacts while ensuring freedom of hand movement. PWRShield on the palm PWRShield is created using a unique knitting technique that results in a fabric with unsurpassed cut, tear & abrasion resistance. This product has PWRShield on the palm. hydratex®Z-Liner A waterproof layer laminated to a carrier forms the REV IT! hydratex®Z-Liner membrane. The backing fabric protects the membrane from damage, & the seams of the membrane are taped to guarantee its waterproofness. The Z-Liner is located between the lining & the outer fabric. The REV IT! hydratex®Z-Liner membrane is used in garments that require a high level of all-weather protection. Exkin® Platinum Insulation Material It is an extremely lightweight, soft & warm multi-layer structure that adds very little thickness to a jacket, pants or winter glove. Exkin® Platinum is the optimal choice to keep your body warm. It is thin, wonderfully soft, yet extremely warm. It is made from non-woven fabric that reflects the body s radiant heat loss back to the user, preventing heat loss when riding in cold conditions. ...

The heated Freedom H2O motorcycle glove REV IT! has given a sleek & stylish look & a fine feel, & of course the THERMOTRONIC high-tech system that keeps your hands at the ideal temperature of about 33 degrees Celsius regardless of weather conditions such as wind, humidity & cold. The THERMOTRONIC has four different heat levels (from low to high), which can be easily adjusted with the large button on the upper part of the glove. Thanks to the colored ring around the knob, it is very easy to see which heat level is currently applied. The exterior of the glove is made from flexible softshell material on the upper hand & grippy leather on the palm. The synthetic lining is combined with Exkin® Platinum® insulation for a definite feeling of comfort & protection from the cold right away. By using a soft knuckle shell gloves is very comfortable to wear, but still delivers plenty of safety. The hydratex Z-Liner construction guarantees one hundred percent waterproofness. Furthermore, r... ...

The heated Freedom H2O motorcycle glove REV IT! has given a sleek & stylish look & a fine feel, & of course the THERMOTRONIC high-tech system that keeps your hands at the ideal temperature of about 33 degrees Celsius regardless of weather conditions such as wind, humidity & cold. The THERMOTRONIC has four different heat levels (from low to high), which can be easily adjusted with the large button on the upper part of the glove. Thanks to the colored ring around the knob, it is very easy to see which heat level is currently applied. The exterior of the glove is made from flexible softshell material on the upper hand & grippy leather on the palm. The synthetic lining is combined with Exkin® Platinum® insulation for a definite feeling of comfort & protection from the cold right away. By using a soft knuckle shell gloves is very comfortable to wear, but still delivers plenty of safety. The hydratex Z-Liner construction guarantees one hundred percent waterproofness. Furthermore, reflective stripes & logos are found on the top of the hand to increase your visibility without disturbing the clean & fresh look glove. Not to mention the conductive fingertip. With it you can operate touchscreens without having to take off the glove, a great advantage in cold weather. The Freedom H2O motorcycle glove takes the winter its fright. Features Battery pack with REV IT! Thermotronic heating technology, set with two 7.4 V batteries & micro USB (Universal Serial Bus) cable With soft knuckle protection Temperfoam® palm grinder Exkin® Platinum® optimal insulation Adjustable wrist strap Stretch fabric on the fingers Elastic drawstring on the cuff Closure at wrist strap Conductive fabric on index finger Conductive fabric on the thumbs Long cuffs Visor wiper These gloves are certified according to EN 13594 standard, published in 2015 & meet the protection standard Level-1 Heating Features Heating System: Fixed REV’IT! Thermotronic heating technology system Mode 1: 25% – White – Eco – 375 minutes (6.25 hrs) Mode 2: 50% – Yellow – Medium – 300 minutes (5 hrs) Mode 3: 75% – Orange – High – 225 minutes (3.75 hrs) Mode 4: 100% – Red – Boost – 150 minutes (2.5 hrs) Charge Time: 4-5 hours using wall charger Tri-Fleece Lining This tricot polyester fabric is used as a glove lining & brushed to provide better insulation without adding thickness. The lining pulls moisture away to keep hands dry. High-Loft Fur Lining This type of insulation mimics the natural insulating properties of an animal fur: The structure of high-loft fibers stores more air than normal fibers, this natural insulation traps heat. Conductive fabric at the fingertips Take off your gloves to operate your navigation system or smartphone? No longer necessary thanks to the conductive fingertips specially designed for touchscreens. Viscoelastic knuckle These knuckle protectors are made from viscoelastic rubber. The protects your knuckles from impacts while ensuring freedom of hand movement. PWRShield on the palm PWRShield is created using a unique knitting technique that results in a fabric with unsurpassed cut, tear & abrasion resistance. This product has PWRShield on the palm. hydratex®Z-Liner A waterproof layer laminated to a carrier forms the REV IT! hydratex®Z-Liner membrane. The backing fabric protects the membrane from damage, & the seams of the membrane are taped to guarantee its waterproofness. The Z-Liner is located between the lining & the outer fabric. The REV IT! hydratex®Z-Liner membrane is used in garments that require a high level of all-weather protection. Exkin® Platinum Insulation Material It is an extremely lightweight, soft & warm multi-layer structure that adds very little thickness to a jacket, pants or winter glove. Exkin® Platinum is the optimal choice to keep your body warm. It is thin, wonderfully soft, yet extremely warm. It is made from non-woven fabric that reflects the body s radiant heat loss back to the user, preventing heat loss when riding in cold conditions. ...

The heated Freedom H2O motorcycle glove REV IT! has given a sleek & stylish look & a fine feel, & of course the THERMOTRONIC high-tech system that keeps your hands at the ideal temperature of about 33 degrees Celsius regardless of weather conditions such as wind, humidity & cold. The THERMOTRONIC has four different heat levels (from low to high), which can be easily adjusted with the large button on the upper part of the glove. Thanks to the colored ring around the knob, it is very easy to see which heat level is currently applied. The exterior of the glove is made from flexible softshell material on the upper hand & grippy leather on the palm. The synthetic lining is combined with Exkin® Platinum® insulation for a definite feeling of comfort & protection from the cold right away. By using a soft knuckle shell gloves is very comfortable to wear, but still delivers plenty of safety. The hydratex Z-Liner construction guarantees one hundred percent waterproofness. Furthermore, r... ...

The heated Freedom H2O motorcycle glove REV IT! has given a sleek & stylish look & a fine feel, & of course the THERMOTRONIC high-tech system that keeps your hands at the ideal temperature of about 33 degrees Celsius regardless of weather conditions such as wind, humidity & cold. The THERMOTRONIC has four different heat levels (from low to high), which can be easily adjusted with the large button on the upper part of the glove. Thanks to the colored ring around the knob, it is very easy to see which heat level is currently applied. The exterior of the glove is made from flexible softshell material on the upper hand & grippy leather on the palm. The synthetic lining is combined with Exkin® Platinum® insulation for a definite feeling of comfort & protection from the cold right away. By using a soft knuckle shell gloves is very comfortable to wear, but still delivers plenty of safety. The hydratex Z-Liner construction guarantees one hundred percent waterproofness. Furthermore, reflective stripes & logos are found on the top of the hand to increase your visibility without disturbing the clean & fresh look glove. Not to mention the conductive fingertip. With it you can operate touchscreens without having to take off the glove, a great advantage in cold weather. The Freedom H2O motorcycle glove takes the winter its fright. Features Battery pack with REV IT! Thermotronic heating technology, set with two 7.4 V batteries & micro USB (Universal Serial Bus) cable With soft knuckle protection Temperfoam® palm grinder Exkin® Platinum® optimal insulation Adjustable wrist strap Stretch fabric on the fingers Elastic drawstring on the cuff Closure at wrist strap Conductive fabric on index finger Conductive fabric on the thumbs Long cuffs Visor wiper These gloves are certified according to EN 13594 standard, published in 2015 & meet the protection standard Level-1 Heating Features Heating System: Fixed REV’IT! Thermotronic heating technology system Mode 1: 25% – White – Eco – 375 minutes (6.25 hrs) Mode 2: 50% – Yellow – Medium – 300 minutes (5 hrs) Mode 3: 75% – Orange – High – 225 minutes (3.75 hrs) Mode 4: 100% – Red – Boost – 150 minutes (2.5 hrs) Charge Time: 4-5 hours using wall charger Tri-Fleece Lining This tricot polyester fabric is used as a glove lining & brushed to provide better insulation without adding thickness. The lining pulls moisture away to keep hands dry. High-Loft Fur Lining This type of insulation mimics the natural insulating properties of an animal fur: The structure of high-loft fibers stores more air than normal fibers, this natural insulation traps heat. Conductive fabric at the fingertips Take off your gloves to operate your navigation system or smartphone? No longer necessary thanks to the conductive fingertips specially designed for touchscreens. Viscoelastic knuckle These knuckle protectors are made from viscoelastic rubber. The protects your knuckles from impacts while ensuring freedom of hand movement. PWRShield on the palm PWRShield is created using a unique knitting technique that results in a fabric with unsurpassed cut, tear & abrasion resistance. This product has PWRShield on the palm. hydratex®Z-Liner A waterproof layer laminated to a carrier forms the REV IT! hydratex®Z-Liner membrane. The backing fabric protects the membrane from damage, & the seams of the membrane are taped to guarantee its waterproofness. The Z-Liner is located between the lining & the outer fabric. The REV IT! hydratex®Z-Liner membrane is used in garments that require a high level of all-weather protection. Exkin® Platinum Insulation Material It is an extremely lightweight, soft & warm multi-layer structure that adds very little thickness to a jacket, pants or winter glove. Exkin® Platinum is the optimal choice to keep your body warm. It is thin, wonderfully soft, yet extremely warm. It is made from non-woven fabric that reflects the body s radiant heat loss back to the user, preventing heat loss when riding in cold conditions. ...

The Freeze 2 WB wind collar is your extra large shield from cold, wind, & rain. The REV’IT! WINDBARRIER® material helps you stay dry & warm, while the extended front panel covers a large area of the chest for extra waterproofing & warmth. Plus, the Freeze takes the sting out of breathing in cold air thanks to a mesh panel for your nose. ...

The Freeze 2 WB wind collar is your extra large shield from cold, wind, & rain. The REV’IT! WINDBARRIER® material helps you stay dry & warm, while the extended front panel covers a large area of the chest for extra waterproofing & warmth. Plus, the Freeze takes the sting out of breathing in cold air thanks to a mesh panel for your nose. ...