For female sport street riders looking for a waterproof jacket (with ventilation) that also want the aesthetic of speed wrapped into a class AA jacket, we bring you the Control H2O Ladies. Its own vibe When Revit created the Control H2O Ladies jacket, they had a very distinct vision. It was to be the seamless blending of both motorsport & sportswear (think lamination around the zippers & tonal graphic prints). & unlike in the past
- where any item in a “family” of jackets/pants/one-pieces
- echoed almost identical aesthetics, Revit did something new. The Control H2O Ladies jacket incorporates the use of ergonomic gradient shapes built out of diamonds & applied it in its own unique way along the back of the arms. This way, it’s immediately recognizable as a member of the “ Control” series, but with its own fashion-focused twist. Every (rainy)day functionality For the days when the rain is coming down, you’re covered. The Control H2O Ladies jacket comes with the hydratex Mesh G-lin...

...

For the race enthusiast that need not compromise (without going full spec) meet the Control gloves. A blend of years’ worth of data & testing from our Moto GP riders delivered to your hands to use on your preferred track. Built for speed & comfort Slip your hands into these gauntlet-style gloves & easily & secure them with a double cuff closure & a wrist strap. Making sure you have the precisely tailored tension every time while you throttle or brake your way through the apexes. Adding that extra bit of grip you’ll need at track speeds is the grip patch at the palm & thumb. The body of it The body of Control gloves is comprised of a tough yet supple goat leather & cowhide, giving you the flexibility to move your hands freely from the get-go. But it doesn’t stop there. Kangaroo leather on the inside of the hand makes them even more durable & stronger, while at the same time, giving you a better feel of the handlebars. Add in the 3D air mesh at the back of the cuff straps & hands can stay cool when things heat. Setting you up for success Pre-curved fingers, stretch in the places you need the most flexibility in (think thumb, finger lip & thump lips), & for the first time in our gloves’ history, outside finger binding helps set track riders up for success. Not to mention Revit also included a stretch panel on the inside of the hand for even more dexterity. A moisture-wicking tri-fleece liner has also been incorporated. Incorporated safety High-impact absorption comes in the form of the SEESOFT foam at the palm & wrist, while Temperfoam® can be found at the back of the h&, cuff, fingers, palm, & more. Furthermore, a TPU hard knuckle, finger knuckles, & palm slider are there for you if you take a tumble. Features Stretch inserts on the thumb Stretch inserts on the fingers Stretch fabric on the thumb Adjustment tab on the cuffs Adjustment strap on wrist Concertina structure Double cuff closure Wrist strap Anti-slip material on the thumb Anti-slip material on the palm, grip patch Sewn on the outside Long cuff Conductive tissue on the index finger Pre-curved fingers Outer garment 3D Air Mesh Kangaroo leather Microfiber e-touch PU coated fabric PWR Four-way stretch Cowhide Drum-tanned goatskin Water-repellent Goat Digital goat leather Lining Moisture-wicking tri-fleece lining Climate characteristics Ventilation holes Protection Little finger bridge PWRYarn SEESOFT on the wrist SEESOFT on the palm Temperfoam® on the knuckle of the thumb Temperfoam® on the cuff Temperfoam® on the back of the hand Temperfoam® knuckles Temperfoam® palm slider Temperfoam® under the ankle protector TPU upper hand protector TPU hard-shell thumb protector TPU hard shell knuckles TPU hard shell palm slider TPU hard shell knuckles TPU cuff protector Certification Certified according to the EN 13594:2015 standard Meets the level 1 KP protection standard Tri-Fleece liner This polyester tricot fabric is used for glove lining, & brushed to provide extra warmth without adding any bulk. The lining wicks moisture away, to prevent hands from getting damp. Conductive fingertip With the conductive fingertip, you can do just that. Strategically placed correctly on your index fingers, you can set/change your navigation routes, tell your friends your location, select your music playlist, or whatever else you use a touchscreen for. This feature is especially handy when driving in cold weather, no need to take off your gloves & put your hands at risk of shock freezing. You ll be warm, cozy & in control wherever you are. PWRyarn PWRyarn is a 100% nylon thread with a unique internal bonding, which imparts excellent durability, high tensile & breaking strength, & ultimate abrasion resistance. Its strength comes from its unique structure, as a 3-wired yarn with an extra 4th wire spun into it. This 4th wire is heated to bond with the other 3 threads, so it will never unravel or split open. Seams with PWRyarn hold under even the most extreme stress, & are perfect for outer seams on gloves & garments. Outside stitching The PWRyarn stitching is positioned on the outside of the glove, eliminating any potential pressure points at the seams, & giving these gloves the ultimate sensitivity every racer demands. Drum tanned goatskin with WR finish Tanned goatskin is considered to be particularly durable & is often used for gloves & other products that require a soft type of leather. Goatskin with WR finish has undergone a process that makes it water-repellent & stain resistant. The WR coating is bonded to the material at a molecular level, enhancing the material s natural water & dirt repellency without altering the look, feel or breathability of the fabric. Temperfoam® This self-contouring foam is used in areas where mobility & fit are a must, such as the knuckles. Temperfoam® is available in both a rigid & a perforated version. Hard shell knuckle The hard shell knuckle protector reinforces a very vulnerable part of the hand without compromising flexibility & freedom of movement. Tri-Fleece liner This polyester tricot fabric is used for glove lining, & brushed to provide extra warmth without adding any bulk. The lining wicks moisture away, to prevent hands from getting damp. Grip patch A grip patch is made with a texturized pattern to deliver a superb grip performance. ...

For the race enthusiast that need not compromise (without going full spec) meet the Control gloves. A blend of years’ worth of data & testing from our Moto GP riders delivered to your hands to use on your preferred track. Built for speed & comfort Slip your hands into these gauntlet-style gloves & easily & secure them with a double cuff closure & a wrist strap. Making sure you have the precisely tailored tension every time while you throttle or brake your way through the apexes. Adding that extra bit of grip you’ll need at track speeds is the grip patch at the palm & thumb. The body of it The body of Control gloves is comprised of a tough yet supple goat leather & cowhide, giving you the flexibility to move your hands freely from the get-go. But it doesn’t stop there. Kangaroo leather on the inside of the hand makes them even more durable & stronger, while at the same time, giving you a better feel of the handlebars. Add in the 3D air mesh at the back of the cuff straps & hands can stay cool when things heat. Setting you up for success Pre-curved fingers, stretch in the places you need the most flexibility in (think thumb, finger lip & thump lips), & for the first time in our gloves’ history, outside finger binding helps set track riders up for success. Not to mention Revit also included a stretch panel on the inside of the hand for even more dexterity. A moisture-wicking tri-fleece liner has also been incorporated. Incorporated safety High-impact absorption comes in the form of the SEESOFT foam at the palm & wrist, while Temperfoam® can be found at the back of the h&, cuff, fingers, palm, & more. Furthermore, a TPU hard knuckle, finger knuckles, & palm slider are there for you if you take a tumble. Features Stretch inserts on the thumb Stretch inserts on the fingers Stretch fabric on the thumb Adjustment tab on the cuffs Adjustment strap on wrist Concertina structure Double cuff closure Wrist strap Anti-slip material on the thumb Anti-slip material on the palm, grip patch Sewn on the outside Long cuff Conductive tissue on the index finger Pre-curved fingers Outer garment 3D Air Mesh Kangaroo leather Microfiber e-touch PU coated fabric PWR Four-way stretch Cowhide Drum-tanned goatskin Water-repellent Goat Digital goat leather Lining Moisture-wicking tri-fleece lining Climate characteristics Ventilation holes Protection Little finger bridge PWRYarn SEESOFT on the wrist SEESOFT on the palm Temperfoam® on the knuckle of the thumb Temperfoam® on the cuff Temperfoam® on the back of the hand Temperfoam® knuckles Temperfoam® palm slider Temperfoam® under the ankle protector TPU upper hand protector TPU hard-shell thumb protector TPU hard shell knuckles TPU hard shell palm slider TPU hard shell knuckles TPU cuff protector Certification Certified according to the EN 13594:2015 standard Meets the level 1 KP protection standard Tri-Fleece liner This polyester tricot fabric is used for glove lining, & brushed to provide extra warmth without adding any bulk. The lining wicks moisture away, to prevent hands from getting damp. Conductive fingertip With the conductive fingertip, you can do just that. Strategically placed correctly on your index fingers, you can set/change your navigation routes, tell your friends your location, select your music playlist, or whatever else you use a touchscreen for. This feature is especially handy when driving in cold weather, no need to take off your gloves & put your hands at risk of shock freezing. You ll be warm, cozy & in control wherever you are. PWRyarn PWRyarn is a 100% nylon thread with a unique internal bonding, which imparts excellent durability, high tensile & breaking strength, & ultimate abrasion resistance. Its strength comes from its unique structure, as a 3-wired yarn with an extra 4th wire spun into it. This 4th wire is heated to bond with the other 3 threads, so it will never unravel or split open. Seams with PWRyarn hold under even the most extreme stress, & are perfect for outer seams on gloves & garments. Outside stitching The PWRyarn stitching is positioned on the outside of the glove, eliminating any potential pressure points at the seams, & giving these gloves the ultimate sensitivity every racer demands. Drum tanned goatskin with WR finish Tanned goatskin is considered to be particularly durable & is often used for gloves & other products that require a soft type of leather. Goatskin with WR finish has undergone a process that makes it water-repellent & stain resistant. The WR coating is bonded to the material at a molecular level, enhancing the material s natural water & dirt repellency without altering the look, feel or breathability of the fabric. Temperfoam® This self-contouring foam is used in areas where mobility & fit are a must, such as the knuckles. Temperfoam® is available in both a rigid & a perforated version. Hard shell knuckle The hard shell knuckle protector reinforces a very vulnerable part of the hand without compromising flexibility & freedom of movement. Tri-Fleece liner This polyester tricot fabric is used for glove lining, & brushed to provide extra warmth without adding any bulk. The lining wicks moisture away, to prevent hands from getting damp. Grip patch A grip patch is made with a texturized pattern to deliver a superb grip performance. ...

For the race enthusiast that need not compromise (without going full spec) meet the Control gloves. A blend of years’ worth of data & testing from our Moto GP riders delivered to your hands to use on your preferred track. Built for speed & comfort Slip your hands into these gauntlet-style gloves & easily & secure them with a double cuff closure & a wrist strap. Making sure you have the precisely tailored tension every time while you throttle or brake your way through the apexes. Adding that extra bit of grip you’ll need at track speeds is the grip patch at the palm & thumb. The body of it The body of Control gloves is comprised of a tough yet supple goat leather & cowhide, giving you the flexibility to move your hands freely from the get-go. But it doesn’t stop there. Kangaroo leather on the inside of the hand makes them even more durable & stronger, while at the same time, giving you a better feel of the handlebars. Add in the 3D air mesh at the back of the cuff straps & hands can stay cool when things heat. Setting you up for success Pre-curved fingers, stretch in the places you need the most flexibility in (think thumb, finger lip & thump lips), & for the first time in our gloves’ history, outside finger binding helps set track riders up for success. Not to mention Revit also included a stretch panel on the inside of the hand for even more dexterity. A moisture-wicking tri-fleece liner has also been incorporated. Incorporated safety High-impact absorption comes in the form of the SEESOFT foam at the palm & wrist, while Temperfoam® can be found at the back of the h&, cuff, fingers, palm, & more. Furthermore, a TPU hard knuckle, finger knuckles, & palm slider are there for you if you take a tumble. Features Stretch inserts on the thumb Stretch inserts on the fingers Stretch fabric on the thumb Adjustment tab on the cuffs Adjustment strap on wrist Concertina structure Double cuff closure Wrist strap Anti-slip material on the thumb Anti-slip material on the palm, grip patch Sewn on the outside Long cuff Conductive tissue on the index finger Pre-curved fingers Outer garment 3D Air Mesh Kangaroo leather Microfiber e-touch PU coated fabric PWR Four-way stretch Cowhide Drum-tanned goatskin Water-repellent Goat Digital goat leather Lining Moisture-wicking tri-fleece lining Climate characteristics Ventilation holes Protection Little finger bridge PWRYarn SEESOFT on the wrist SEESOFT on the palm Temperfoam® on the knuckle of the thumb Temperfoam® on the cuff Temperfoam® on the back of the hand Temperfoam® knuckles Temperfoam® palm slider Temperfoam® under the ankle protector TPU upper hand protector TPU hard-shell thumb protector TPU hard shell knuckles TPU hard shell palm slider TPU hard shell knuckles TPU cuff protector Certification Certified according to the EN 13594:2015 standard Meets the level 1 KP protection standard Tri-Fleece liner This polyester tricot fabric is used for glove lining, & brushed to provide extra warmth without adding any bulk. The lining wicks moisture away, to prevent hands from getting damp. Conductive fingertip With the conductive fingertip, you can do just that. Strategically placed correctly on your index fingers, you can set/change your navigation routes, tell your friends your location, select your music playlist, or whatever else you use a touchscreen for. This feature is especially handy when driving in cold weather, no need to take off your gloves & put your hands at risk of shock freezing. You ll be warm, cozy & in control wherever you are. PWRyarn PWRyarn is a 100% nylon thread with a unique internal bonding, which imparts excellent durability, high tensile & breaking strength, & ultimate abrasion resistance. Its strength comes from its unique structure, as a 3-wired yarn with an extra 4th wire spun into it. This 4th wire is heated to bond with the other 3 threads, so it will never unravel or split open. Seams with PWRyarn hold under even the most extreme stress, & are perfect for outer seams on gloves & garments. Outside stitching The PWRyarn stitching is positioned on the outside of the glove, eliminating any potential pressure points at the seams, & giving these gloves the ultimate sensitivity every racer demands. Drum tanned goatskin with WR finish Tanned goatskin is considered to be particularly durable & is often used for gloves & other products that require a soft type of leather. Goatskin with WR finish has undergone a process that makes it water-repellent & stain resistant. The WR coating is bonded to the material at a molecular level, enhancing the material s natural water & dirt repellency without altering the look, feel or breathability of the fabric. Temperfoam® This self-contouring foam is used in areas where mobility & fit are a must, such as the knuckles. Temperfoam® is available in both a rigid & a perforated version. Hard shell knuckle The hard shell knuckle protector reinforces a very vulnerable part of the hand without compromising flexibility & freedom of movement. Tri-Fleece liner This polyester tricot fabric is used for glove lining, & brushed to provide extra warmth without adding any bulk. The lining wicks moisture away, to prevent hands from getting damp. Grip patch A grip patch is made with a texturized pattern to deliver a superb grip performance. ...

For the race enthusiast that need not compromise (without going full spec) meet the Control gloves. A blend of years’ worth of data & testing from our Moto GP riders delivered to your hands to use on your preferred track. Built for speed & comfort Slip your hands into these gauntlet-style gloves & easily & secure them with a double cuff closure & a wrist strap. Making sure you have the precisely tailored tension every time while you throttle or brake your way through the apexes. Adding that extra bit of grip you’ll need at track speeds is the grip patch at the palm & thumb. The body of it The body of Control gloves is comprised of a tough yet supple goat leather & cowhide, giving you the flexibility to move your hands freely from the get-go. But it doesn’t stop there. Kangaroo leather on the inside of the hand makes them even more durable & stronger, while at the same time, giving you a better feel of the handlebars. Add in the 3D air mesh at the back of the cuff straps & hands can stay cool when things heat. Setting you up for success Pre-curved fingers, stretch in the places you need the most flexibility in (think thumb, finger lip & thump lips), & for the first time in our gloves’ history, outside finger binding helps set track riders up for success. Not to mention Revit also included a stretch panel on the inside of the hand for even more dexterity. A moisture-wicking tri-fleece liner has also been incorporated. Incorporated safety High-impact absorption comes in the form of the SEESOFT foam at the palm & wrist, while Temperfoam® can be found at the back of the h&, cuff, fingers, palm, & more. Furthermore, a TPU hard knuckle, finger knuckles, & palm slider are there for you if you take a tumble. Features Stretch inserts on the thumb Stretch inserts on the fingers Stretch fabric on the thumb Adjustment tab on the cuffs Adjustment strap on wrist Concertina structure Double cuff closure Wrist strap Anti-slip material on the thumb Anti-slip material on the palm, grip patch Sewn on the outside Long cuff Conductive tissue on the index finger Pre-curved fingers Outer garment 3D Air Mesh Kangaroo leather Microfiber e-touch PU coated fabric PWR Four-way stretch Cowhide Drum-tanned goatskin Water-repellent Goat Digital goat leather Lining Moisture-wicking tri-fleece lining Climate characteristics Ventilation holes Protection Little finger bridge PWRYarn SEESOFT on the wrist SEESOFT on the palm Temperfoam® on the knuckle of the thumb Temperfoam® on the cuff Temperfoam® on the back of the hand Temperfoam® knuckles Temperfoam® palm slider Temperfoam® under the ankle protector TPU upper hand protector TPU hard-shell thumb protector TPU hard shell knuckles TPU hard shell palm slider TPU hard shell knuckles TPU cuff protector Certification Certified according to the EN 13594:2015 standard Meets the level 1 KP protection standard Tri-Fleece liner This polyester tricot fabric is used for glove lining, & brushed to provide extra warmth without adding any bulk. The lining wicks moisture away, to prevent hands from getting damp. Conductive fingertip With the conductive fingertip, you can do just that. Strategically placed correctly on your index fingers, you can set/change your navigation routes, tell your friends your location, select your music playlist, or whatever else you use a touchscreen for. This feature is especially handy when driving in cold weather, no need to take off your gloves & put your hands at risk of shock freezing. You ll be warm, cozy & in control wherever you are. PWRyarn PWRyarn is a 100% nylon thread with a unique internal bonding, which imparts excellent durability, high tensile & breaking strength, & ultimate abrasion resistance. Its strength comes from its unique structure, as a 3-wired yarn with an extra 4th wire spun into it. This 4th wire is heated to bond with the other 3 threads, so it will never unravel or split open. Seams with PWRyarn hold under even the most extreme stress, & are perfect for outer seams on gloves & garments. Outside stitching The PWRyarn stitching is positioned on the outside of the glove, eliminating any potential pressure points at the seams, & giving these gloves the ultimate sensitivity every racer demands. Drum tanned goatskin with WR finish Tanned goatskin is considered to be particularly durable & is often used for gloves & other products that require a soft type of leather. Goatskin with WR finish has undergone a process that makes it water-repellent & stain resistant. The WR coating is bonded to the material at a molecular level, enhancing the material s natural water & dirt repellency without altering the look, feel or breathability of the fabric. Temperfoam® This self-contouring foam is used in areas where mobility & fit are a must, such as the knuckles. Temperfoam® is available in both a rigid & a perforated version. Hard shell knuckle The hard shell knuckle protector reinforces a very vulnerable part of the hand without compromising flexibility & freedom of movement. Tri-Fleece liner This polyester tricot fabric is used for glove lining, & brushed to provide extra warmth without adding any bulk. The lining wicks moisture away, to prevent hands from getting damp. Grip patch A grip patch is made with a texturized pattern to deliver a superb grip performance. ...

For the race enthusiast that need not compromise (without going full spec) meet the Control gloves. A blend of years’ worth of data & testing from our Moto GP riders delivered to your hands to use on your preferred track. Built for speed & comfort Slip your hands into these gauntlet-style gloves & easily & secure them with a double cuff closure & a wrist strap. Making sure you have the precisely tailored tension every time while you throttle or brake your way through the apexes. Adding that extra bit of grip you’ll need at track speeds is the grip patch at the palm & thumb. The body of it The body of Control gloves is comprised of a tough yet supple goat leather & cowhide, giving you the flexibility to move your hands freely from the get-go. But it doesn’t stop there. Kangaroo leather on the inside of the hand makes them even more durable & stronger, while at the same time, giving you a better feel of the handlebars. Add in the 3D air mesh at the back of the cuff straps & hands can stay cool when things heat. Setting you up for success Pre-curved fingers, stretch in the places you need the most flexibility in (think thumb, finger lip & thump lips), & for the first time in our gloves’ history, outside finger binding helps set track riders up for success. Not to mention Revit also included a stretch panel on the inside of the hand for even more dexterity. A moisture-wicking tri-fleece liner has also been incorporated. Incorporated safety High-impact absorption comes in the form of the SEESOFT foam at the palm & wrist, while Temperfoam® can be found at the back of the h&, cuff, fingers, palm, & more. Furthermore, a TPU hard knuckle, finger knuckles, & palm slider are there for you if you take a tumble. Features Stretch inserts on the thumb Stretch inserts on the fingers Stretch fabric on the thumb Adjustment tab on the cuffs Adjustment strap on wrist Concertina structure Double cuff closure Wrist strap Anti-slip material on the thumb Anti-slip material on the palm, grip patch Sewn on the outside Long cuff Conductive tissue on the index finger Pre-curved fingers Outer garment 3D Air Mesh Kangaroo leather Microfiber e-touch PU coated fabric PWR Four-way stretch Cowhide Drum-tanned goatskin Water-repellent Goat Digital goat leather Lining Moisture-wicking tri-fleece lining Climate characteristics Ventilation holes Protection Little finger bridge PWRYarn SEESOFT on the wrist SEESOFT on the palm Temperfoam® on the knuckle of the thumb Temperfoam® on the cuff Temperfoam® on the back of the hand Temperfoam® knuckles Temperfoam® palm slider Temperfoam® under the ankle protector TPU upper hand protector TPU hard-shell thumb protector TPU hard shell knuckles TPU hard shell palm slider TPU hard shell knuckles TPU cuff protector Certification Certified according to the EN 13594:2015 standard Meets the level 1 KP protection standard Tri-Fleece liner This polyester tricot fabric is used for glove lining, & brushed to provide extra warmth without adding any bulk. The lining wicks moisture away, to prevent hands from getting damp. Conductive fingertip With the conductive fingertip, you can do just that. Strategically placed correctly on your index fingers, you can set/change your navigation routes, tell your friends your location, select your music playlist, or whatever else you use a touchscreen for. This feature is especially handy when driving in cold weather, no need to take off your gloves & put your hands at risk of shock freezing. You ll be warm, cozy & in control wherever you are. PWRyarn PWRyarn is a 100% nylon thread with a unique internal bonding, which imparts excellent durability, high tensile & breaking strength, & ultimate abrasion resistance. Its strength comes from its unique structure, as a 3-wired yarn with an extra 4th wire spun into it. This 4th wire is heated to bond with the other 3 threads, so it will never unravel or split open. Seams with PWRyarn hold under even the most extreme stress, & are perfect for outer seams on gloves & garments. Outside stitching The PWRyarn stitching is positioned on the outside of the glove, eliminating any potential pressure points at the seams, & giving these gloves the ultimate sensitivity every racer demands. Drum tanned goatskin with WR finish Tanned goatskin is considered to be particularly durable & is often used for gloves & other products that require a soft type of leather. Goatskin with WR finish has undergone a process that makes it water-repellent & stain resistant. The WR coating is bonded to the material at a molecular level, enhancing the material s natural water & dirt repellency without altering the look, feel or breathability of the fabric. Temperfoam® This self-contouring foam is used in areas where mobility & fit are a must, such as the knuckles. Temperfoam® is available in both a rigid & a perforated version. Hard shell knuckle The hard shell knuckle protector reinforces a very vulnerable part of the hand without compromising flexibility & freedom of movement. Tri-Fleece liner This polyester tricot fabric is used for glove lining, & brushed to provide extra warmth without adding any bulk. The lining wicks moisture away, to prevent hands from getting damp. Grip patch A grip patch is made with a texturized pattern to deliver a superb grip performance. ...

For the race enthusiast that need not compromise (without going full spec) meet the Control gloves. A blend of years’ worth of data & testing from our Moto GP riders delivered to your hands to use on your preferred track. Built for speed & comfort Slip your hands into these gauntlet-style gloves & easily & secure them with a double cuff closure & a wrist strap. Making sure you have the precisely tailored tension every time while you throttle or brake your way through the apexes. Adding that extra bit of grip you’ll need at track speeds is the grip patch at the palm & thumb. The body of it The body of Control gloves is comprised of a tough yet supple goat leather & cowhide, giving you the flexibility to move your hands freely from the get-go. But it doesn’t stop there. Kangaroo leather on the inside of the hand makes them even more durable & stronger, while at the same time, giving you a better feel of the handlebars. Add in the 3D air mesh at the back of the cuff straps... ...

For the race enthusiast that need not compromise (without going full spec) meet the Control gloves. A blend of years’ worth of data & testing from our Moto GP riders delivered to your hands to use on your preferred track. Built for speed & comfort Slip your hands into these gauntlet-style gloves & easily & secure them with a double cuff closure & a wrist strap. Making sure you have the precisely tailored tension every time while you throttle or brake your way through the apexes. Adding that extra bit of grip you’ll need at track speeds is the grip patch at the palm & thumb. The body of it The body of Control gloves is comprised of a tough yet supple goat leather & cowhide, giving you the flexibility to move your hands freely from the get-go. But it doesn’t stop there. Kangaroo leather on the inside of the hand makes them even more durable & stronger, while at the same time, giving you a better feel of the handlebars. Add in the 3D air mesh at the back of the cuff straps... ...

For the race enthusiast that need not compromise (without going full spec) meet the Control gloves. A blend of years’ worth of data & testing from our Moto GP riders delivered to your hands to use on your preferred track. Built for speed & comfort Slip your hands into these gauntlet-style gloves & easily & secure them with a double cuff closure & a wrist strap. Making sure you have the precisely tailored tension every time while you throttle or brake your way through the apexes. Adding that extra bit of grip you’ll need at track speeds is the grip patch at the palm & thumb. The body of it The body of Control gloves is comprised of a tough yet supple goat leather & cowhide, giving you the flexibility to move your hands freely from the get-go. But it doesn’t stop there. Kangaroo leather on the inside of the hand makes them even more durable & stronger, while at the same time, giving you a better feel of the handlebars. Add in the 3D air mesh at the back of the cuff straps... ...

For the race enthusiast that need not compromise (without going full spec) meet the Control gloves. A blend of years’ worth of data & testing from our Moto GP riders delivered to your hands to use on your preferred track. Built for speed & comfort Slip your hands into these gauntlet-style gloves & easily & secure them with a double cuff closure & a wrist strap. Making sure you have the precisely tailored tension every time while you throttle or brake your way through the apexes. Adding that extra bit of grip you’ll need at track speeds is the grip patch at the palm & thumb. The body of it The body of Control gloves is comprised of a tough yet supple goat leather & cowhide, giving you the flexibility to move your hands freely from the get-go. But it doesn’t stop there. Kangaroo leather on the inside of the hand makes them even more durable & stronger, while at the same time, giving you a better feel of the handlebars. Add in the 3D air mesh at the back of the cuff straps... ...