Practicity, fresh look & stretch fabric & protective reinforcements at the right points, a 360 ° fashion / safety pants. Features BUL 325 gr. main fabric high strenght & stretch 100% TWARON® ballistic fabric inner reinforced & mesh lined Knees approved protectors EN1621-1, adjustable & removable Ready for Zero-Shock padding on hips EN13595-2 EN13595-4 tested Anatomical knee construction Casual fit, Fashion pant “OLD Dying” treatment ...

Features T-TEX®: TWARON® Single Layer Technology Approved knee protectors EN 1621-1, adjustable & removable Approved hip protectors EN 1621-1, removable Approved P.P.E. under EN 17092-4 (A) EN 13595-1 tested PMJ – TWARON© Strong like steel High heat resistance, cut-resistance, non-melting & low flammability, make TWARON® the best high protection innovative synthetic fiber. PMJ tailors its products with ballistic TWARON®, the same used in the production of bulletproof vests, which is different from all other aramid fabrics, thanks to the shuttle construction with weft/warp woven. The material obtained from these innovative yarns is much stronger than many other, but of course also much more resistant. The resistance is much higher than “ Kevlar”, cotton fabrics, knitted fabrics, linings & felt. PMJ is the only company that made abrasion resistance & cut tests on aramid fibers. The test is the same used to test clothing for motorcyclists & provides values known throughout the world (EN13595). Abrasion, cutting & burst
- EN 13595-1:2002 approved There’s no other type of fabric that combine strength, practicality & comfort as used by PMJ.
...

Features T-TEX®: TWARON® Single Layer Technology Approved knee protectors EN 1621-1, adjustable & removable Approved hip protectors EN 1621-1, removable Approved P.P.E. under EN 17092-4 (A) EN 13595-1 tested PMJ – TWARON© Strong like steel High heat resistance, cut-resistance, non-melting & low flammability, make TWARON® the best high protection innovative synthetic fiber. PMJ tailors its products with ballistic TWARON®, the same used in the production of bulletproof vests, which is different from all other aramid fabrics, thanks to the shuttle construction with weft/warp woven. The material obtained from these innovative yarns is much stronger than many other, but of course also much more resistant. The resistance is much higher than “ Kevlar”, cotton fabrics, knitted fabrics, linings & felt. PMJ is the only company that made abrasion resistance & cut tests on aramid fibers. The test is the same used to test clothing for motorcyclists & provides values known throughout the world (EN13595). Abrasion, cutting & burst
- EN 13595-1:2002 approved There’s no other type of fabric that combine strength, practicality & comfort as used by PMJ.
...

Features T-TEX®: TWARON® Single Layer Technology Approved knee protectors EN 1621-1, adjustable & removable Approved hip protectors EN 1621-1, removable Approved P.P.E. under EN 17092-4 (A) EN 13595-1 tested PMJ – TWARON© Strong like steel High heat resistance, cut-resistance, non-melting & low flammability, make TWARON® the best high protection innovative synthetic fiber. PMJ tailors its products with ballistic TWARON®, the same used in the production of bulletproof vests, which is different from all other aramid fabrics, thanks to the shuttle construction with weft/warp woven. The material obtained from these innovative yarns is much stronger than many other, but of course also much more resistant. The resistance is much higher than “ Kevlar”, cotton fabrics, knitted fabrics, linings & felt. PMJ is the only company that made abrasion resistance & cut tests on aramid fibers. The test is the same used to test clothing for motorcyclists & provides values known throughout the world (EN13595). Abrasion, cutting & burst
- EN 13595-1:2002 approved There’s no other type of fabric that combine strength, practicality & comfort as used by PMJ.
...

Features T-TEX®: TWARON® Single Layer Technology Approved knee protectors EN 1621-1, adjustable & removable Approved hip protectors EN 1621-1, removable Approved P.P.E. under EN 17092-4 (A) EN 13595-1 tested PMJ – TWARON© Strong like steel High heat resistance, cut-resistance, non-melting & low flammability, make TWARON® the best high protection innovative synthetic fiber. PMJ tailors its products with ballistic TWARON®, the same used in the production of bulletproof vests, which is different from all other aramid fabrics, thanks to the shuttle construction with weft/warp woven. The material obtained from these innovative yarns is much stronger than many other, but of course also much more resistant. The resistance is much higher than “ Kevlar”, cotton fabrics, knitted fabrics, linings & felt. PMJ is the only company that made abrasion resistance & cut tests on aramid fibers. The test is the same used to test clothing for motorcyclists & provides values known throughout the wo... ...

Features T-TEX®: TWARON® Single Layer Technology Approved knee protectors EN 1621-1, adjustable & removable Approved hip protectors EN 1621-1, removable Approved P.P.E. under EN 17092-4 (A) EN 13595-1 tested PMJ – TWARON© Strong like steel High heat resistance, cut-resistance, non-melting & low flammability, make TWARON® the best high protection innovative synthetic fiber. PMJ tailors its products with ballistic TWARON®, the same used in the production of bulletproof vests, which is different from all other aramid fabrics, thanks to the shuttle construction with weft/warp woven. The material obtained from these innovative yarns is much stronger than many other, but of course also much more resistant. The resistance is much higher than “ Kevlar”, cotton fabrics, knitted fabrics, linings & felt. PMJ is the only company that made abrasion resistance & cut tests on aramid fibers. The test is the same used to test clothing for motorcyclists & provides values known throughout the wo... ...

Features T-TEX®: TWARON® Single Layer Technology Approved knee protectors EN 1621-1, adjustable & removable Approved hip protectors EN 1621-1, removable Approved P.P.E. under EN 17092-4 (A) EN 13595-1 tested PMJ – TWARON© Strong like steel High heat resistance, cut-resistance, non-melting & low flammability, make TWARON® the best high protection innovative synthetic fiber. PMJ tailors its products with ballistic TWARON®, the same used in the production of bulletproof vests, which is different from all other aramid fabrics, thanks to the shuttle construction with weft/warp woven. The material obtained from these innovative yarns is much stronger than many other, but of course also much more resistant. The resistance is much higher than “ Kevlar”, cotton fabrics, knitted fabrics, linings & felt. PMJ is the only company that made abrasion resistance & cut tests on aramid fibers. The test is the same used to test clothing for motorcyclists & provides values known throughout the wo... ...

Features T-TEX®: TWARON® Single Layer Technology Approved knee protectors EN 1621-1, adjustable & removable Approved hip protectors EN 1621-1, removable Approved P.P.E. under EN 17092-4 (A) EN 13595-1 tested PMJ – TWARON© Strong like steel High heat resistance, cut-resistance, non-melting & low flammability, make TWARON® the best high protection innovative synthetic fiber. PMJ tailors its products with ballistic TWARON®, the same used in the production of bulletproof vests, which is different from all other aramid fabrics, thanks to the shuttle construction with weft/warp woven. The material obtained from these innovative yarns is much stronger than many other, but of course also much more resistant. The resistance is much higher than “ Kevlar”, cotton fabrics, knitted fabrics, linings & felt. PMJ is the only company that made abrasion resistance & cut tests on aramid fibers. The test is the same used to test clothing for motorcyclists & provides values known throughout the wo... ...

Features T-TEX®: TWARON® Single Layer Technology Approved knee protectors EN 1621-1, adjustable & removable Approved hip protectors EN 1621-1, removable Approved P.P.E. under EN 17092-4 (A) EN 13595-1 tested PMJ – TWARON© Strong like steel High heat resistance, cut-resistance, non-melting & low flammability, make TWARON® the best high protection innovative synthetic fiber. PMJ tailors its products with ballistic TWARON®, the same used in the production of bulletproof vests, which is different from all other aramid fabrics, thanks to the shuttle construction with weft/warp woven. The material obtained from these innovative yarns is much stronger than many other, but of course also much more resistant. The resistance is much higher than “ Kevlar”, cotton fabrics, knitted fabrics, linings & felt. PMJ is the only company that made abrasion resistance & cut tests on aramid fibers. The test is the same used to test clothing for motorcyclists & provides values known throughout the wo... ...

Features T-TEX®: TWARON® Single Layer Technology Approved knee protectors EN 1621-1, adjustable & removable Approved hip protectors EN 1621-1, removable Approved P.P.E. under EN 17092-4 (A) EN 13595-1 tested PMJ – TWARON© Strong like steel High heat resistance, cut-resistance, non-melting & low flammability, make TWARON® the best high protection innovative synthetic fiber. PMJ tailors its products with ballistic TWARON®, the same used in the production of bulletproof vests, which is different from all other aramid fabrics, thanks to the shuttle construction with weft/warp woven. The material obtained from these innovative yarns is much stronger than many other, but of course also much more resistant. The resistance is much higher than “ Kevlar”, cotton fabrics, knitted fabrics, linings & felt. PMJ is the only company that made abrasion resistance & cut tests on aramid fibers. The test is the same used to test clothing for motorcyclists & provides values known throughout the wo... ...