Replacement liner for your helmet: Nolan N64 Grex G6.2 example picture ...

Replacement liner for your helmet: Nolan N64 Grex G6.2 example picture ...

Replacement liner for your helmet: Nolan N64 Grex G6.2 example picture ...

Replacement liner for your helmet: Nolan N64 Grex G6.2 example picture ...

visor Ultra-Wide from Lexan scratch-resistant coated sun visor UV 400 protection dark tinted from Lexan scratch-resistant coated " Clima Comfort" interior removable & washable ventilation " Airbooster Technology" for optimal ventilation Ventilation opening in the visor & chin part shutter Microlock² additional equipment additional shade for sun protection & a detachable chin part, which turns the jet into a fully functioning full face helmet in no time at all (P / J double homologation) N-Com preparation B901L/B901/B601R/MCS III/ESS Note Please note that as long as nothing else is written in the article description, all helmets that have a visor as standard will be delivered with a clear one, even if it is shown differently. ...

visor Ultra-Wide from Lexan scratch-resistant coated Homologations UN/ECE 22-05 sun visor UV 400 protection dark tinted from Lexan scratch-resistant coated " Clima Comfort" interior removable & washable ventilation " Airbooster Technology" for optimal ventilation Ventilation opening in the visor & chin part shutter Microlock² additional equipment additional shade for sun protection & a detachable chin part, which turns the jet into a fully functioning full face helmet in no time at all (P / J double homologation) N-Com preparation B901L/B901/B601R/MCS III/ESS SHARP – THE HELMET SAFETY SCHEME Nolangroup proudly underlines that all of its products
- Nolan, X-Lite & Grex
- tested by SHARP, the prominent independent test system run by the British Government, have obtained at least four stars. Furthermore, all of the “ip-up” helmets have received the highest possible rating in terms of chin guard latch reliability. This means that, for each of the products tested by SHARP, the chin guard remains completely closed during each of the 30 anvils (carried out on 6 different-sized helmets, at different speeds & against different objects). Note Please note that as long as nothing else is written in the article description, all helmets that have a visor as standard will be delivered with a clear one, even if it is shown differently.

...

visor Ultra-Wide from Lexan scratch-resistant coated sun visor UV 400 protection dark tinted from Lexan scratch-resistant coated " Clima Comfort" interior removable & washable ventilation " Airbooster Technology" for optimal ventilation Ventilation opening in the visor & chin part shutter Microlock² additional equipment additional shade for sun protection & a detachable chin part, which turns the jet into a fully functioning full face helmet in no time at all (P / J double homologation) N-Com preparation B901L/B901/B601R/MCS III/ESS Note Please note that as long as nothing else is written in the article description, all helmets that have a visor as standard will be delivered with a clear one, even if it is shown differently. ...

This is Nolan’s top-of-the range road crossover which maintains & enriches the much-appreciated characteristics of its predecessor, the N44. It is characterized by an unmistakable design, its many technical features & the ample range of colours & graphics available. Its compact size (thanks to the availability of two outer shell sizes), double P/J homologation, ultrawide visor, VPS sunscreen (adjustable to various positions & fitted with the automatic repositioning system), Air Booster Technology upper ventilation system, double lever Microlock² retention system with micrometric regulation, innovative Clima Comfort inner padding (with micro-perforated fabric & adjustable neck-roll) & set up for the N-Com communication system make the N70-2 GT the definitive road crossover for the most demanding of motorbike tourists. Features Polycarbonate shell P/J-Homologation Ultrawide visor Pinlock-ready anti-scratch visor (Pinlock FSB 4L) Pinlock-screen included Quick release visor system Sunscreen with UV-400 protection Airbooster technology Microlock retention system Removable Clima Comfort Interior with antibacterial treatment Removable neck-roll Wind protector N-Com ready ESS
- Emergency Stop Signal ready Helmet bag Homologized UN/ECE 22-05 Possible configurations The helmet can be used in six different configurations. N70-2 GT is in fact characterized by the presence of a visor & a removable protective chin guard which can be fitted to the helmet either individually or together, or alternatively removed completely. In addition to these elements, there is a peak (available according to segment) which can be fitted in place of the visor. P/J Homologation The helmet can be used either with the chin guard open (J configuration) or closed (P configuration), as the protective chin guard has passed the homologation tests required by UN/ECE regulations for full-face helmets. Ultrawide visor The large surface of the S/R (Scratch Resistant) visor makes it possible to have a broader view, also lateral, thus highly increasing active safety. Pinlock® Fog-Resistant inner visor Thanks to the patented adjusting system, the stretch of the Pinlock® inner visor can be adjusted, acting from the exterior of the visor, without the necessity of removing. The Full Silicone Border (FSB), adopted under licence from Pinlock®, allows first of all for an increase in the size of the air chamber located between the helmet exterior & interior, thus further reducing the risk of fogging, secondly, it reduces the risk of scratches to the visor. Airbooster technology The exclusive “ Air Booster Technology” upper system ensures optimal ventilation where the rider’s head most requires: the air is extracted from the upper air intake & forced into the most critical areas, avoiding any dispersion, to guarantee maximum comfort also in extreme riding conditions. Moreover, the ventilation system

Features: a chin guard air intake
- this allows ventilation at mouth level & directs air straight to the visor, limiting fogging a rear extractor
- integrated in a rear spoiler, it allows for the expulsion of hot, stale air Microlock² (patented) Availability according to the product version. It is a patented double lever retention system with micrometric adjustment. It consists of a thermoplastic ergonomic opening lever, & of a second aluminium toothed & holding lever. The toothed lever releases the micrometric strip, thus the chin strap can only be open with a very broad rotation of the opening lever. This device minimizes the possibility of unintentional opening of the retention system. Set up for N-COM communication system The helmet is ready & approved with the N-Com communication system installed. The system allowing for the installation & the compatible N-Com product itself, have both been designed with the aim of facilitating the assembly of the system N-COM compatibility B902L R series
- B902 R series
- B601 R series ESS
- MCS III R series SHARP – THE HELMET SAFETY SCHEME Nolangroup proudly underlines that all of its products
- Nolan, X-lite & Grex
- tested by SHARP, the prominent independent test system run by the British Government, have obtained at least four stars. Furthermore, all “flip-up” helmets have received the highest possible rating in terms of chin guard latch reliability. This means that, for each of the products tested by SHARP, the chin guard remains completely closed during each of the 30 impacts. Note Please be aware, as long as nothing else is written in the item description: All helmets will be delivered only with the ECE certification by default all helmets that have a visor will be delivered with a clear visor, even if it is shown differently.









...

This is Nolan’s top-of-the range road crossover which maintains & enriches the much-appreciated characteristics of its predecessor, the N44. It is characterized by an unmistakable design, its many technical features & the ample range of colours & graphics available. Its compact size (thanks to the availability of two outer shell sizes), double P/J homologation, ultrawide visor, VPS sunscreen (adjustable to various positions & fitted with the automatic repositioning system), Air Booster Technology upper ventilation system, double lever Microlock² retention system with micrometric regulation, innovative Clima Comfort inner padding (with micro-perforated fabric & adjustable neck-roll) & set up for the N-Com communication system make the N70-2 GT the definitive road crossover for the most demanding of motorbike tourists. Features Polycarbonate shell P/J-Homologation Ultrawide visor Pinlock-ready anti-scratch visor (Pinlock FSB 4L) Pinlock-screen included Quick release visor system Sunscreen with UV-400 protection Airbooster technology Microlock retention system Removable Clima Comfort Interior with antibacterial treatment Removable neck-roll Wind protector N-Com ready ESS
- Emergency Stop Signal ready Helmet bag Homologized UN/ECE 22-05 Possible configurations The helmet can be used in six different configurations. N70-2 GT is in fact characterized by the presence of a visor & a removable protective chin guard which can be fitted to the helmet either individually or together, or alternatively removed completely. In addition to these elements, there is a peak (available according to segment) which can be fitted in place of the visor. P/J Homologation The helmet can be used either with the chin guard open (J configuration) or closed (P configuration), as the protective chin guard has passed the homologation tests required by UN/ECE regulations for full-face helmets. Ultrawide visor The large surface of the S/R (Scratch Resistant) visor makes it possible to have a broader view, also lateral, thus highly increasing active safety. Pinlock® Fog-Resistant inner visor Thanks to the patented adjusting system, the stretch of the Pinlock® inner visor can be adjusted, acting from the exterior of the visor, without the necessity of removing. The Full Silicone Border (FSB), adopted under licence from Pinlock®, allows first of all for an increase in the size of the air chamber located between the helmet exterior & interior, thus further reducing the risk of fogging, secondly, it reduces the risk of scratches to the visor. Airbooster technology The exclusive “ Air Booster Technology” upper system ensures optimal ventilation where the rider’s head most requires: the air is extracted from the upper air intake & forced into the most critical areas, avoiding any dispersion, to guarantee maximum comfort also in extreme riding conditions. Moreover, the ventilation system

Features: a chin guard air intake
- this allows ventilation at mouth level & directs air straight to the visor, limiting fogging a rear extractor
- integrated in a rear spoiler, it allows for the expulsion of hot, stale air Microlock² (patented) Availability according to the product version. It is a patented double lever retention system with micrometric adjustment. It consists of a thermoplastic ergonomic opening lever, & of a second aluminium toothed & holding lever. The toothed lever releases the micrometric strip, thus the chin strap can only be open with a very broad rotation of the opening lever. This device minimizes the possibility of unintentional opening of the retention system. Set up for N-COM communication system The helmet is ready & approved with the N-Com communication system installed. The system allowing for the installation & the compatible N-Com product itself, have both been designed with the aim of facilitating the assembly of the system N-COM compatibility B902L R series
- B902 R series
- B601 R series ESS
- MCS III R series SHARP – THE HELMET SAFETY SCHEME Nolangroup proudly underlines that all of its products
- Nolan, X-lite & Grex
- tested by SHARP, the prominent independent test system run by the British Government, have obtained at least four stars. Furthermore, all “flip-up” helmets have received the highest possible rating in terms of chin guard latch reliability. This means that, for each of the products tested by SHARP, the chin guard remains completely closed during each of the 30 impacts. Note Please be aware, as long as nothing else is written in the item description: All helmets will be delivered only with the ECE certification by default all helmets that have a visor will be delivered with a clear visor, even if it is shown differently.









...

This is Nolan’s top-of-the range road crossover which maintains & enriches the much-appreciated characteristics of its predecessor, the N44. It is characterized by an unmistakable design, its many technical features & the ample range of colours & graphics available. Its compact size (thanks to the availability of two outer shell sizes), double P/J homologation, ultrawide visor, VPS sunscreen (adjustable to various positions & fitted with the automatic repositioning system), Air Booster Technology upper ventilation system, double lever Microlock² retention system with micrometric regulation, innovative Clima Comfort inner padding (with micro-perforated fabric & adjustable neck-roll) & set up for the N-Com communication system make the N70-2 GT the definitive road crossover for the most demanding of motorbike tourists. Features Polycarbonate shell P/J-Homologation Ultrawide visor Pinlock-ready anti-scratch visor (Pinlock FSB 4L) Pinlock-screen included Quick release visor system Sunscreen with UV-400 protection Airbooster technology Microlock retention system Removable Clima Comfort Interior with antibacterial treatment Removable neck-roll Wind protector N-Com ready ESS
- Emergency Stop Signal ready Helmet bag Homologized UN/ECE 22-05 Possible configurations The helmet can be used in six different configurations. N70-2 GT is in fact characterized by the presence of a visor & a removable protective chin guard which can be fitted to the helmet either individually or together, or alternatively removed completely. In addition to these elements, there is a peak (available according to segment) which can be fitted in place of the visor. P/J Homologation The helmet can be used either with the chin guard open (J configuration) or closed (P configuration), as the protective chin guard has passed the homologation tests required by UN/ECE regulations for full-face helmets. Ultrawide visor The large surface of the S/R (Scratch Resistant) visor makes it possible to have a broader view, also lateral, thus highly increasing active safety. Pinlock® Fog-Resistant inner visor Thanks to the patented adjusting system, the stretch of the Pinlock® inner visor can be adjusted, acting from the exterior of the visor, without the necessity of removing. The Full Silicone Border (FSB), adopted under licence from Pinlock®, allows first of all for an increase in the size of the air chamber located between the helmet exterior & interior, thus further reducing the risk of fogging, secondly, it reduces the risk of scratches to the visor. Airbooster technology The exclusive “ Air Booster Technology” upper system ensures optimal ventilation where the rider’s head most requires: the air is extracted from the upper air intake & forced into the most critical areas, avoiding any dispersion, to guarantee maximum comfort also in extreme riding conditions. Moreover, the ventilation system

Features: a chin guard air intake
- this allows ventilation at mouth level & directs air straight to the visor, limiting fogging a rear extractor
- integrated in a rear spoiler, it allows for the expulsion of hot, stale air Microlock² (patented) Availability according to the product version. It is a patented double lever retention system with micrometric adjustment. It consists of a thermoplastic ergonomic opening lever, & of a second aluminium toothed & holding lever. The toothed lever releases the micrometric strip, thus the chin strap can only be open with a very broad rotation of the opening lever. This device minimizes the possibility of unintentional opening of the retention system. Set up for N-COM communication system The helmet is ready & approved with the N-Com communication system installed. The system allowing for the installation & the compatible N-Com product itself, have both been designed with the aim of facilitating the assembly of the system N-COM compatibility B902L R series
- B902 R series
- B601 R series ESS
- MCS III R series SHARP – THE HELMET SAFETY SCHEME Nolangroup proudly underlines that all of its products
- Nolan, X-lite & Grex
- tested by SHARP, the prominent independent test system run by the British Government, have obtained at least four stars. Furthermore, all “flip-up” helmets have received the highest possible rating in terms of chin guard latch reliability. This means that, for each of the products tested by SHARP, the chin guard remains completely closed during each of the 30 impacts. Note Please be aware, as long as nothing else is written in the item description: All helmets will be delivered only with the ECE certification by default all helmets that have a visor will be delivered with a clear visor, even if it is shown differently.









...