With this low aluminium handlebar the look & handling of the bike changes considerably. Due to the relatively low height & larger width, an aggressive look is created, which is especially desired for Streetfighter conversions. Features Depending on the model the handlebars have an ABE or TÜV certificate The surface of this shapely aluminium handlebar is high-quality anodised & available in the trendy colours silver, blue & titanium Due to the strong 5mm wall the handlebar is especially break-proof Bar ends must be matched to this wall An adjustment of cables, brake & clutch lines may be necessary due to the greater width of the handlebars depending on the model

Dimensions

Width: 750 mm Height inside/outside: 53/110 mm Offset to the rear: 91 mm Width at clamp: up to 145 mm Outer diameter: 22 mm Inner diameter: 12 mm If the model is not listed in the supplied ABE, this is used as a TÜV certificate
- an evaluation at the TÜV/ Dekra immediately after the installation is necessary to get the confirmation of the correct installation & thus the approval by individual acceptance.




...

With this low aluminium handlebar the look & handling of the bike changes considerably. Due to the relatively low height & larger width, an aggressive look is created, which is especially desired for Streetfighter conversions. Features Depending on the model the handlebars have an ABE or TÜV certificate The surface of this shapely aluminium handlebar is high-quality anodised & available in the trendy colours silver, blue & titanium Due to the strong 5mm wall the handlebar is especially break-proof Bar ends must be matched to this wall An adjustment of cables, brake & clutch lines may be necessary due to the greater width of the handlebars depending on the model

Dimensions

Width: 750 mm Height inside/outside: 53/110 mm Offset to the rear: 91 mm Width at clamp: up to 145 mm Outer diameter: 22 mm Inner diameter: 12 mm If the model is not listed in the supplied ABE, this is used as a TÜV certificate
- an evaluation at the TÜV/ Dekra immediately after the installation is necessary...




...

If the original handlebars are heavily corroded, broken by a crash or if you want to change the look, Lucas/TRW steel handlebars are the perfect choice. Features Homologation ABE for many vehicles, in many cases no more TÜV necessary! Large variety of types for nearly all applications on the road For a more comfortable seating position or a more aggressive look Steering tubes made from high-strength steel with 22 mm Ø & 3-fold coating Surface refinement exclusively with environmentally friendly processes High quality product " Made in Germany"

Dimensions

Width: 810 mm

Height: 83 mm Offset to the rear: 223 mm Width at clamp: 130 mm If the model is not listed in the supplied ABE, this is used as a TÜV certificate
- an evaluation at the TÜV/ Dekra immediately after the installation is necessary to get the confirmation of the correct installation & thus the approval by individual acceptance.






...

If the original handlebars are heavily corroded, broken by a crash or if you want to change the look, Lucas/TRW steel handlebars are the perfect choice. Features Homologation ABE for many vehicles, in many cases no more TÜV necessary! Large variety of types for nearly all applications on the road For a more comfortable seating position or a more aggressive look Steering tubes made from high-strength steel with 22 mm Ø & 3-fold coating Surface refinement exclusively with environmentally friendly processes High quality product " Made in Germany"

Dimensions

Width: 810 mm

Height: 83 mm Offset to the rear: 223 mm Width at clamp: 130 mm If the model is not listed in the supplied ABE, this is used as a TÜV certificate
- an evaluation at the TÜV/ Dekra immediately after the installation is necessary to get the confirmation of the correct installation & thus the approval by individual acceptance.






...

If the original handlebars are heavily corroded, broken by a crash or if you want to change the look, Lucas/TRW steel handlebars are the perfect choice. Features Homologation ABE for many vehicles, in many cases no more TÜV necessary! Large variety of types for nearly all applications on the road For a more comfortable seating position or a more aggressive look Steering tubes made from high-strength steel with 22 mm Ø & 3-fold coating Surface refinement exclusively with environmentally friendly processes High quality product " Made in Germany"

Dimensions

Width: 810 mm

Height: 83 mm Offset to the rear: 223 mm Width at clamp: 130 mm If the model is not listed in the supplied ABE, this is used as a TÜV certificate
- an evaluation at the TÜV/ Dekra immediately after the installation is necessary to get the confirmation of the correct installation & thus the approval by individual acceptance.






...

If the original handlebars are heavily corroded, broken by a crash or if you want to change the look, Lucas/TRW steel handlebars are the perfect choice. Features Homologation ABE for many vehicles, in many cases no more TÜV necessary! Large variety of types for nearly all applications on the road For a more comfortable seating position or a more aggressive look Steering tubes made from high-strength steel with 22 mm Ø & 3-fold coating Surface refinement exclusively with environmentally friendly processes High quality product " Made in Germany"

Dimensions

Width: 765 mm

Height: 44 mm Offset to the rear: 115 mm Width at clamp: 170 mm If the model is not listed in the supplied ABE, this is used as a TÜV certificate
- an evaluation at the TÜV/ Dekra immediately after the installation is necessary to get the confirmation of the correct installation & thus the approval by individual acceptance.






...

If the original handlebars are heavily corroded, broken by a crash or if you want to change the look, Lucas/TRW steel handlebars are the perfect choice. Features Homologation ABE for many vehicles, in many cases no more TÜV necessary! Large variety of types for nearly all applications on the road For a more comfortable seating position or a more aggressive look Steering tubes made from high-strength steel with 22 mm Ø & 3-fold coating Surface refinement exclusively with environmentally friendly processes High quality product " Made in Germany"

Dimensions

Width: 765 mm

Height: 44 mm Offset to the rear: 115 mm Width at clamp: 170 mm If the model is not listed in the supplied ABE, this is used as a TÜV certificate
- an evaluation at the TÜV/ Dekra immediately after the installation is necessary to get the confirmation of the correct installation & thus the approval by individual acceptance.






...

If the original handlebars are heavily corroded, broken by a crash or if you want to change the look, Lucas/TRW steel handlebars are the perfect choice. Features Homologation ABE for many vehicles, in many cases no more TÜV necessary! Large variety of types for nearly all applications on the road For a more comfortable seating position or a more aggressive look Steering tubes made from high-strength steel with 22 mm Ø Surface refinement exclusively with environmentally friendly processes High quality product " Made in Germany"

Dimensions

Width: 770 mm Inner

Height: 126, 4 mm Outer

Height: 126, 4 mm Offset to the rear: 224 mm Width at clamp: 170 mm If the model is not listed in the supplied ABE, this is used as a TÜV certificate
- an evaluation at the TÜV/ Dekra immediately after the installation is necessary to get the confirmation of the correct installation & thus the approval by individual acceptance.








...

If the original handlebars are heavily corroded, broken by a crash or if you want to change the look, Lucas/TRW steel handlebars are the perfect choice. Features Homologation ABE for many vehicles, in many cases no more TÜV necessary! Large variety of types for nearly all applications on the road For a more comfortable seating position or a more aggressive look Steering tubes made from high-strength steel with 22 mm Ø Surface refinement exclusively with environmentally friendly processes High quality product " Made in Germany"

Dimensions

Width: 770 mm Inner

Height: 126, 4 mm Outer

Height: 126, 4 mm Offset to the rear: 224 mm Width at clamp: 170 mm If the model is not listed in the supplied ABE, this is used as a TÜV certificate
- an evaluation at the TÜV/ Dekra immediately after the installation is necessary to get the confirmation of the correct installation & thus the approval by individual acceptance.








...

If the original handlebars are heavily corroded, broken by a crash or if you want to change the look, Lucas/TRW steel handlebars are the perfect choice. Features Steel handlebar MCL 113SC 22mm Homologation ABE for many vehicles, in many cases no more TÜV necessary! Large variety of types for nearly all applications on the road For a more comfortable seating position or a more aggressive look Steering tubes made from high-strength steel with 22 mm Ø Surface refinement exclusively with environmentally friendly processes High quality product " Made in Germany"

Dimensions

Width: 770 mm Inner

Height: 132 mm Outer

Height: 132 mm Offset to the rear: 215 mm Width at clamp: 170 mm If the model is not listed in the supplied ABE, this is used as a TÜV certificate
- an evaluation at the TÜV/ Dekra immediately after the installation is necessary to get the confirmation of the correct installation & thus the approval by individual acceptance.








...