Triumph Speed Triple 1050 fitting hardware for US-Drypacks. The kit consists of high quality hypalon & nylon webbing loops, that easily fit under the pillion seat using the existing mounting locations. Once fitted, they provide strong hook-on points for any Kriega US-Drypack or US-Drypack Combo. Content 4 x bolt-on loops
- 95mm
- 6mm hole 8 x M6 washers Matching Manufacturer Model Model year Triumph Speed Triple 1050

...

Triumph Street Triple 765 specific fitting hardware for US-Drypacks. The kit consists of high quality hypalon & nylon webbing loops, that easily fit under the pillion seat using the existing mounting locations. Once fitted, they provide strong hook-on points for any Kriega US-Drypack or US-Drypack Combo. Content 2 x bolt-on loops
- 95mm
- 6mm hole 2 x bolt-on loops
- 65mm
- 5mm hole 4 x M6 washers 4 x M5 washers Matching Manufacturer Model Model year Triumph Street Triple 765



...

Triumph Street Triple 765 specific fitting hardware for US-Drypacks. The kit consists of high quality hypalon & nylon webbing loops, that easily fit under the pillion seat using the existing mounting locations. Once fitted, they provide strong hook-on points for any Kriega US-Drypack or US-Drypack Combo. Content 2 x bolt-on loops
- 95mm
- 6mm hole 2 x bolt-on loops
- 65mm
- 5mm hole 4 x M6 washers 4 x M5 washers Matching Manufacturer Model Model year Triumph Street Triple 765



...

TRIUMPH TRIDENT 660 specific fitting hardware for Kriega US-Drypacks. The kit consists of high quality hypalon & nylon webbing loops, that easily fit under the seat using the existing mounting locations. Once fitted, they provide strong hook-on points for any Kriega US-Drypack or US-Drypack Combo. Kit contents 2 x 80 mm bolt-on loops 2 X 65 mm bolt-on loops 2 x M5 washers 2 x M6 washers 2 x 25 mm M5 bolts Fitting Slide an M6 washer inside each hypalon end of the 80 mm bolt-on loops. Unscrew the seat strap bolts, add the bolt-on loops & reattach, as illustrated. Slide an M5 washer inside each hypalon end of the 65 mm bolt-on loops. Unscrew the two rear M5 panel bolts, keep the M5 washers but replace the bolts with the new 25 mm bolts. Add the bolt-on loops & reattach. Matching Manufacturer Model Model year Triumph Trident 660 ...

Yamaha Ténéré 700 fitting hardware for US-Drypacks. The kit consists of high quality hypalon & nylon webbing loops, that easily fit under the pillion seat using the existing mounting locations. Once fitted, they provide 4 strong hook-on points to mount any Kriega US-Drypack or US-Drypack Combos or OS-Adventure Packs. Content 4 x 95mm bolt-on loops 8 x M5 washers 4 x M5 screws Matching Manufacturer Model Model year Yamaha Ténéré 700 2019 ...

A new larger version of the popular OS-BASE that is specifically designed to fit the YAMAHA TENERE 700. The OS-BASE is an over the seat harness which allows OS-6, OS-12 or OS-18 ADVENTURE PACKS to be mounted as soft panniers. No additional frames are required, this system provides a super-tough, lightweight carrying solution for the Yamaha Tenere 700 with no drilling or permanent bodywork alterations to the bike. The modular design enables you to modify your luggage set-up to suit your ride
- from a day’s single track to longer moto-camping adventure trips. The KTM RACK LOOPS included, attach to the bike’s baggage carrier/ rear rack & provide 4 optional hook-on points. Used in conjunction with the additional loops on the OS-BASE they provide various mounting points for a 3 or more bag set-up, or can be used to mount an OS-PACK as a stand alone tail pack without the OS-BASE. The set length straps make mounting a breeze & the purpose designed main body shape provides a tight, secure fit with plenty of distance from the exhaust. It takes less than a minute to mount the system to the bike & just seconds to remove it. Features Carrying capacity from 12 to 54 Liters with centre pack mounting option Heavy-duty Hypalon construction Quick & easy to put on/take off Reinforced stitching on all stress points Aircraft grade alloy hooks Non-slip cam buckles

Includes:: 2 x T7 Strap Mounts

Includes:: 4 x T7 Bolt-on Loops 10 YEAR guarantee Important If the OS-BASE has contact with the silencer, a heat shield must be attached. Weight OS-BASE & Fitting Kit 800g / 1.7lb Matching Manufacturer Model Yamaha Ténéré 700




...

A new larger version of the popular OS-BASE that is specifically designed to fit the YAMAHA TENERE 700. The OS-BASE is an over the seat harness which allows OS-6, OS-12 or OS-18 ADVENTURE PACKS to be mounted as soft panniers. No additional frames are required, this system provides a super-tough, lightweight carrying solution for the Yamaha Tenere 700 with no drilling or permanent bodywork alterations to the bike. The modular design enables you to modify your luggage set-up to suit your ride
- from a day’s single track to longer moto-camping adventure trips. The KTM RACK LOOPS included, attach to the bike’s baggage carrier/ rear rack & provide 4 optional hook-on points. Used in conjunction with the additional loops on the OS-BASE they provide various mounting points for a 3 or more bag set-up, or can be used to mount an OS-PACK as a stand alone tail pack without the OS-BASE. The set length straps make mounting a breeze & the purpose designed main body shape provides a tight, secure...
...

Provides an alternative mounting location for the front straps on an OS-BASE Yamaha Ténéré 700 when the rear footrests are removed. Available in two options for bikes with a Standard Seat or a Rally Seat. Features Ultra durable CNC machined Nylon-6 High impact resistance Uses standard fitting hardware ...

Provides an alternative mounting location for the front straps on an OS-BASE Yamaha Ténéré 700 when the rear footrests are removed. Available in two options for bikes with a Standard Seat or a Rally Seat. Features Ultra durable CNC machined Nylon-6 High impact resistance Uses standard fitting hardware ...

Yamaha/ Givi pannier frames are designed to mount aluminium cases & do not have a standard flat profile on the exhaust side. This special edition OS-Platform

Includes:: a stainless steel adaptor to flatten the profile & provide a strong mounting location for the OS-Platform, which then gives you the option to mount Kriega ‘ Soft Luggage’. The Platform is engineered from virtually indestructible Nylon 6, lighter than alloy & without fatigue issues. It is machined with optional attachment points enabling you to set-up the bike to suit your adventure. • Mount a single OS-32 or OS-22 Soft Pannier or a single 1.75 gallon Rotopax™ water container • Mount a OS-6 or OS-12 Adventure Pack with single or double 1 gallon Rotopax™ water containers Rotopax™ 1.75 & 1 gallon fuel containers will also fit but it´s not recommend you mount fuel containers on the exhaust side of the bike. The adaptor is laser cut stainless steel which fixes to the OS-PLATFORM with 3 bolts & Nyloc nuts. It clamps to the top of the YAMAHA frame using 2 of the aircraft grade aluminium clamps. The remaining 4 clamps fix the OS-Platform directly to the frame, giving a very strong & stable base to add an OS-Pannier, OS-Adventure Packs or Rotopax™ fuel or water contains. The Yamaha frame profile on the opposite side to the exhaust is flat & therefore a standard OS-Platform 16mm
- 20mm tube fit, will easily mount to this side. Matching Manufacturer Model Model year Yamaha Ténéré 700 2019


...