Adapter cable for 6A. Lithium polymer battery. Cable to connect the 6 Ampere battery to the 7.4V & 12V charger. Standard with the 6A battery kit (7.4V + 12V) ...

These heated overshoes were developed specifically for cyclists, but because of the design ebnfalls suitable for many other outdoor application as well as for motorcycling. There are 4 heat levels adjustable. The selected heating level is indicated by LED colors. The heating takes place over the entire surface & evenly on the back of the foot. The sole of the overshoe is recessed so that the shoe sole has direct contact with the click pedals (eg SPD pedals). Reflective stripes for greater safety in road traffic. The neoprene material is wind & waterproof. Bitte beachten Sie, dass Batterien/ Netzteile nicht im Lieferumfang enthalten sind. Variant 1 The heated overshoes are powered by two 2.2 amp 7.4 volt batteries. The small batteries are stowed in the overshoes. Variant 2 The heated overshoes are powered by a 6.0 amp 12 volt battery with a long Y-cable. The larger battery is carried in the trouser pocket or similar & a thin power supply cable (included in delivery) leads to the respective overshoes. A very elegant solution, don t worry, the respective cables are not bulky & do not interfere with the freedom of movement. Variant 3 The heated overshoes are supplied with voltage directly from the on-board socket using a Y-cable & a battery connection cable. A thin power supply cable (included in the scope of delivery) leads to the respective overshoes. The respective cables are not bulky & do not interfere with freedom of movement. ...

These heated overshoes were developed specifically for cyclists, but because of the design ebnfalls suitable for many other outdoor application as well as for motorcycling. There are 4 heat levels adjustable. The selected heating level is indicated by LED colors. The heating takes place over the entire surface & evenly on the back of the foot. The sole of the overshoe is recessed so that the shoe sole has direct contact with the click pedals (eg SPD pedals). Reflective stripes for greater safety in road traffic. The neoprene material is wind & waterproof. Bitte beachten Sie, dass Batterien/ Netzteile nicht im Lieferumfang enthalten sind. Variant 1 The heated overshoes are powered by two 2.2 amp 7.4 volt batteries. The small batteries are stowed in the overshoes. Variant 2 The heated overshoes are powered by a 6.0 amp 12 volt battery with a long Y-cable. The larger battery is carried in the trouser pocket or similar & a thin power supply cable (included in delivery) leads to the respective overshoes. A very elegant solution, don t worry, the respective cables are not bulky & do not interfere with the freedom of movement. Variant 3 The heated overshoes are supplied with voltage directly from the on-board socket using a Y-cable & a battery connection cable. A thin power supply cable (included in the scope of delivery) leads to the respective overshoes. The respective cables are not bulky & do not interfere with freedom of movement. ...

These heated overshoes were developed specifically for cyclists, but because of the design ebnfalls suitable for many other outdoor application as well as for motorcycling. There are 4 heat levels adjustable. The selected heating level is indicated by LED colors. The heating takes place over the entire surface & evenly on the back of the foot. The sole of the overshoe is recessed so that the shoe sole has direct contact with the click pedals (eg SPD pedals). Reflective stripes for greater safety in road traffic. The neoprene material is wind & waterproof. Bitte beachten Sie, dass Batterien/ Netzteile nicht im Lieferumfang enthalten sind. Variant 1 The heated overshoes are powered by two 2.2 amp 7.4 volt batteries. The small batteries are stowed in the overshoes. Variant 2 The heated overshoes are powered by a 6.0 amp 12 volt battery with a long Y-cable. The larger battery is carried in the trouser pocket or similar & a thin power supply cable (included in delivery) leads to the respective overshoes. A very elegant solution, don t worry, the respective cables are not bulky & do not interfere with the freedom of movement. Variant 3 The heated overshoes are supplied with voltage directly from the on-board socket using a Y-cable & a battery connection cable. A thin power supply cable (included in the scope of delivery) leads to the respective overshoes. The respective cables are not bulky & do not interfere with freedom of movement. ...

These heated overshoes were developed specifically for cyclists, but because of the design ebnfalls suitable for many other outdoor application as well as for motorcycling. There are 4 heat levels adjustable. The selected heating level is indicated by LED colors. The heating takes place over the entire surface & evenly on the back of the foot. The sole of the overshoe is recessed so that the shoe sole has direct contact with the click pedals (eg SPD pedals). Reflective stripes for greater safety in road traffic. The neoprene material is wind & waterproof. Bitte beachten Sie, dass Batterien/ Netzteile nicht im Lieferumfang enthalten sind. Variant 1 The heated overshoes are powered by two 2.2 amp 7.4 volt batteries. The small batteries are stowed in the overshoes. Variant 2 The heated overshoes are powered by a 6.0 amp 12 volt battery with a long Y-cable. The larger battery is carried in the trouser pocket or similar & a thin power supply cable (included in delivery) leads to the re... ...

Power cord connected to the BMW kind of auxiliary socket of your bike. The cable has a length of 120cm. ...

Heated insoles with a completely autonomous heating system managed remotely by a remote control. Lithium polymer battery integrated in the insole. Charging system via USB (Universal Serial Bus) socket with connection for both batteries. regulation system on three levels, heating power of 2 Watt. Duration battery inside: Level 1 (white) – 6:00 hours, Level 2 (Blue) – 4:45 hours, Level 3 (violet) – 3:30 hours ...

Heated insoles with a completely autonomous heating system managed remotely by a remote control. Lithium polymer battery integrated in the insole. Charging system via USB (Universal Serial Bus) socket with connection for both batteries. regulation system on three levels, heating power of 2 Watt. Duration battery inside: Level 1 (white) – 6:00 hours, Level 2 (Blue) – 4:45 hours, Level 3 (violet) – 3:30 hours ...

Heated insoles with a completely autonomous heating system managed remotely by a remote control. Lithium polymer battery integrated in the insole. Charging system via USB (Universal Serial Bus) socket with connection for both batteries. regulation system on three levels, heating power of 2 Watt. Duration battery inside: Level 1 (white) – 6:00 hours, Level 2 (Blue) – 4:45 hours, Level 3 (violet) – 3:30 hours ...

Cable to connect the gloves or socks to the power supply choosen by customer. The cable should be placed inside the jacket or trousers & with a single input connector, it will feed power on both arms / legs. The length of the two branches of the cable is 130cm. ...