More From Contributor

Hey Bob, flip this! When you belly up to this table, you know you gotta get the works. The Airframe Pro™ Fast Food is a double-deuce all-beef psychoburger, sans fries, on a sesame bun that begs for a load of special sauce. We hope you brought your appetite because we re serving up some autoerotic mastication. Check, please! Features World Standard, meets DOT FMVSS 218 (US), ECE 22-05 (EUROPE), & PSC (JAPAN) Helmet Safety Standards (does not ship with PSC certification stickers unless purchased from an authorized dealer in that country) Handcrafted Composite Fiber shell Four unique shell sizes for minimized mass & drag Sculpted neck roll reduces jacket/suit interference Five-piece modular liner with moisture-wicking Hydradry™ fabric Linear ported forehead vents Low-profile vents throughout the shell Fog-Free Icon Optics™ Shield with Rapid-Release™ System Prolock™ positive shield locking system Removable breath deflector & chin curtain Trac Shield™ shield with tear-off posts available (sold separately) Fit The most common helmet fit type, the intermediate oval head is slightly shorter front-to-back & a little wider side-to-side. Venting 9 air intakes & 7 exhaust ports coupled with deep channeling in the interior energy absorbing EPS foam results in superior helmet venting. Weight Precision assembly techniques helps ICON to dramatically reduce the shell profile & allows ICON to craft a helmet that is exceptionally light. Exterior A decrease of both drag & weight was achieved by sculpting the traditional neckline of the AFP to avoid jacket or suit interference. With a total of nine intakes & five exhaust vents, ventilation is a premier feature of the AIRFRAME PRO. The forehead vents are angled to provide linear at speed while deep-channels in the liner enhances airflow by routing more air effectively. Shield The rapid release shield removal system means that you can swap the fog-free Icon Optics shield in the blink of an eye. This cutting-edge system means that you can select the right shield for the conditions, all of which produce unrivaled distortion-free line of sight for what lies ahead. The flat Icon Trac Shield™ is available for the AIRFRAME PRO as a factory solution for riders who require tear-offs. Compatible with our rapid release shield change mechanism, the Trac Shield™ can be used on the AIRFRAME PRO & AIRMADA helmets. Interior The five-piece sweat wicking Hydradry™ liner provides a greater amount of fitment combinations for each unique head shape. Crown, later, fore & aft padding components allow for a possibility of 27 combinations in a single shell, double that of the Airframe Pro’s competitors. Note Please be aware, as long as nothing else is written in the item description: All helmets will be delivered only with the ECE certification by default all helmets that have a visor will be delivered with a clear visor, even if it is shown differently. ...

Available

Come on baby, don’t fear the reaper, take him for a ride. A relic from ICON’s times of yore, we raised the dead to bring you a retired graphic from the ALLIANCE™ line. Out of the light & into the night, the Harbinger graphic now adorns the AIRFRAME PRO™. A slave to the scythe & the speed, he’s a friendly reminder of “ The Final Harvest.” Behave accordingly. The modern riding position
- higher rear sets, lower clip-ons
- has dramatically altered how a rider interacts with the modern hypersport motorcycle. Compressed into an ever more compact shape, the rider ’s head positioning requires increased angle to maintain visibility & stability. With this in mind, ICON designed the AIRFRAME PRO™. Features Handmade composite shell, h&-applied design, & precision manufacturing techniques. Five-Piece Modular Liner With Moisture-Wicking Hydradry™ Liner.

Includes:: Clear Fog-Free Icon Optics™ shield & Dark Smoke Tracshield™ with Rapid-Release™ system & Pro Lock™ positive shield locking system. Meets DOT FMVSS 218 (US), ECE 22-05 (Europe), & PSC (Japan) Helmet Safety Standards. Does not ship with PSC certification stickers unless purchased from an authorized dealer in that country. Fit The most common helmet fit type, the Intermediate Oval head is slightly shorter front-to-back & a little wider side-to-side. Venting 9 air intakes & 7 exhaust ports coupled with deep channeling in the interior energy absorbing EPS foam results in superior helmet venting. Weight Precision assembly techniques help us to dramatically reduce the shell profile & allow us to to craft a helmet that is exceptionally light. Exterior A decrease of both drag & weight was achieved by sculpting the traditional neckline of the AFP to avoid jacket or suit interference. With a total of nine intakes & five exhaust vents, ventilation is a premier feature the AIRFRAME PRO. The forehead vents are angled to provide linear at speed while deep -channels in the liner enhances airflow by routing more air effectively. Shield The Rapid release shield removal system means that you can swap the fog-free Icon Optics shield in the blink of an eye. This cutting-edge system means that you can select the right shield for the conditions, all of which produce unrivaled distortion-free line of sight for what lies ahead. The flat Icon Trac Shield is available for the AIRFRAME PRO as a factory solution for riders who require tear-offs. Compatible with our Rapid Release shield change mechanism, the Trac Shield can be used on the AIRFRAME PRO & AIRMADA helmets. Interior The five-piece sweat wicking Hydradry liner provides a greater amount of fitment combinations for each unique head shape. Crown, later, fore & aft padding components allow for a possibility of 27 combinations in a single shell, double that of the Airframe Pro’s competitors. Note Please note that as long as nothing else is written in the article description, all helmets that have a visor as standard will be delivered with a clear one, even if it is shown differently.

...

Archived Product

A riot of color navigates the current, perseverance & determination turn a fish into a golden dragon. Built on a lightweight fiberglass FRP shell, the Koi

Includes:: both a fog-free Clear & RST Blue Optics™ shield & a customizable 5-piece Hydradry™ comfort liner that means that you can dial in your fit. The extensive venting system produces the industry s most ventilated helmet to date. Features World Standard, meets DOT FMVSS 218 (US), ECE 22-05 (EUROPE), & PSC (JAPAN) Helmet Safety Standards (does not ship with PSC certification stickers unless purchased from an authorized dealer in that country) Handcrafted Composite Fiber shell Four unique shell sizes for minimized mass & drag Sculpted neck roll reduces jacket/suit interference Five-piece modular liner with moisture-wicking Hydradry™ fabric Linear ported forehead vents Low-profile vents throughout the shell Fog-Free Icon Optics™ Shield with Rapid-Release™ System Prolock™ positive shield locking system Removable breath deflector & chin curtain

Includes:: both a Fog-Free Clear & RST Blue Optics™ shield Trac Shield™ shield with tear-off posts available (sold separately) Fit The most common helmet fit type, the intermediate oval head is slightly shorter front-to-back & a little wider side-to-side. Venting 9 air intakes & 7 exhaust ports coupled with deep channeling in the interior energy absorbing EPS foam results in superior helmet venting. Weight Precision assembly techniques helps ICON to dramatically reduce the shell profile & allows ICON to craft a helmet that is exceptionally light. Exterior A decrease of both drag & weight was achieved by sculpting the traditional neckline of the AFP to avoid jacket or suit interference. With a total of nine intakes & five exhaust vents, ventilation is a premier feature of the AIRFRAME PRO. The forehead vents are angled to provide linear at speed while deep-channels in the liner enhances airflow by routing more air effectively. Shield The rapid release shield removal system means that you can swap the fog-free Icon Optics shield in the blink of an eye. This cutting-edge system means that you can select the right shield for the conditions, all of which produce unrivaled distortion-free line of sight for what lies ahead. The flat Icon Trac Shield™ is available for the AIRFRAME PRO as a factory solution for riders who require tear-offs. Compatible with our rapid release shield change mechanism, the Trac Shield™ can be used on the AIRFRAME PRO & AIRMADA helmets. Interior The five-piece sweat wicking Hydradry™ liner provides a greater amount of fitment combinations for each unique head shape. Crown, later, fore & aft padding components allow for a possibility of 27 combinations in a single shell, double that of the Airframe Pro’s competitors. Note Please be aware, as long as nothing else is written in the item description: All helmets will be delivered only with the ECE certification by default all helmets that have a visor will be delivered with a clear visor, even if it is shown differently.

...

Available

Designed for maneuvering engagements & adorned with extravagant insignia, the Airframe Pro Warbird is built to support your redlined encounters. May the bogeys forever be on your tail & pretty ladies be in your bed. World Standard Meets DOT FMVSS 218 (US) ECE 22-05 (Europe) SAI AS1698:2006 (Australia) PSC (Japan) Helmet Safety Standards. (Does not ship with PSC certification stickers) Shield Fog-Free Icon Optics™ shield with Rapid-Release™ system & Pro Lock™ positive shield locking system. Also fits Icon Tracshield™ with tear-off posts. Liner Five-Piece Modular Liner With Moisture-Wicking Hydradry™ Liner. Shell Handmade composite shell, h&-applied design, & precision manufacturing techniques. Intermediate oval fit The most common helmet fit type, the Intermediate Oval head is slightly shorter front-to-back & a little wider side-to-side. Best venting 9 air intakes & 7 exhaust ports coupled with deep channeling in the interior energy absorbing EPS foam results in superior helmet venting. Wight Precision assembly techniques help us to dramatically reduce the shell profile & allow us to to craft a helmet that is exceptionally light. Exterior A decrease of both drag & weight was achieved by sculpting the traditional neckline of the AFP to avoid jacket or suit interference. With a total of nine intakes & five exhaust vents, ventilation is a premier feature the AIRFRAME PRO. The forehead vents are angled to provide linear at speed while deep -channels in the liner enhances airflow by routing more air effectively. Shield The Rapid release shield removal system means that you can swap the fog-free Icon Optics shield in the blink of an eye. This cutting-edge system means that you can select the right shield for the conditions, all of which produce unrivaled distortion-free line of sight for what lies ahead. The flat Icon Trac Shield is available for the AIRFRAME PRO as a factory solution for riders who require tear-offs. Compatible with our Rapid Release shield change mechanism, the Trac Shield can be used on the AIRFRAME PRO & AIRMADA helmets. Interior The five-piece sweat wicking Hydradry liner provides a greater amount of fitment combinations for each unique head shape. Crown, later, fore & aft padding components allow for a possibility of 27 combinations in a single shell, double that of the Airframe Pro’s competitors. Icon Tracshield The flat Icon Trac Shield™ is available for the Airframe Pro as a factory solution for riders who require tear-offs. Compatible with our Rapid Release™ shield change mechanism, the Trac Shield™ can be used on the Airframe Pro & Airmada helmets, & is available in Dark Smoke, Clear, Yellow, & RST Silver. Tear-offs are available separately. Icon Optics Shield All Icon Optics™ shields include the exclusive Rapid Release™ system for the easiest shield removal & replacement on the market. Icon® shields are available in a variety of tints & styles all with a fog-free coating, perfect for any riding situation you may find yourself in. Note Please note that as long as nothing else is written in the article description, all helmets that have a visor as standard will be delivered with a clear one, even if it is shown differently. ...

Archived Product

The leader in post-apocalyptic fashion, Icon s Airframe Pro Outbreak is a real "head-turner" for when it all hits that proverbial fan. Built on a lightweight fiberglass FRP shell, the Outbreak

Includes:: a Fog-Free Clear & RST Silver-Mirrored Optics shield. The customizable 5-piece Hydradry comfort liner means that you can dial in your fit. The AFP s extensive venting system produces the industry s most ventilated helmet to date. Be that person that says, I was into the apocalypse before it was cool. with the Airframe Pro Outbreak. Features Handcrafted composite fiberglass FRP (fiber-reinforced plastic) shell

Includes:: Clear & RST Silver-Mirrored Icon Optics Shield World Standard, meets DOT FMVSS 218 (US), ECE 22-06 (EUROPE), & PSC (JAPAN) Helmet Safety Standards (does not ship with PSC certification stickers unless purchased from an authorized dealer in that country) Four unique shell sizes for minimized mass & drag Sculpted neck roll reduces jacket/suit interference Five-piece modular li...

...

Available

Icon Airframe Pro Max Flash, Integral Helmet

There’s no time to remove your hat when the American flag flies by you at Mach ten. Moving while standing still, the Airframe Pro MAX FLASH looks so fast it comes preloaded with felony-level infractions. The graphics do the talkin’, while the “Angle of Attack” orientation does the walkin’ (i.e. ridin’). World Standard Meets DOT FMVSS 218 (US), ECE 22-05 (Europe), SAI AS1698:2006 (Australia) & PSC (Japan) Helmet Safety Standards. Shield Fog-Free Icon Optics™ shield with Rapid-Release™ system and ProLock™ positive shield locking system. Also fits Icon Tracshield™ with tear-off posts. Liner Five-Piece Modular Liner With Moisture-Wicking Hydradry™ Liner. Shell Handmade composite shell, hand-applied design, and precision manufacturing techniques. Intermediate oval
fit The most common helmet fit type, the Intermediate Oval head is slightly shorter front-to-back and a little wider side-to-side. Best venting 9 air intakes and 7 exhaust ports coupled with deep channeling in the interior energy absorbing EPS foam results in superior helmet venting. Wight Precision assembly techniques help us to dramatically reduce the shell profile and allow us to to craft a helmet that is exceptionally light. Exterior A decrease of both drag and weight was achieved by sculpting the traditional neckline of the AFP to avoid jacket or suit interference. With a total of nine intakes and five exhaust vents, ventilation is a premier feature the AIRFRAME PRO. The forehead vents are angled to provide linear at speed while deep -channels in the liner enhances airflow by
routing more air effectively. Shield The Rapid release shield removal system allows you to swap the fog-free Icon Optics shield in the blink of an eye. This cutting-edge system allows you to select the right shield for the conditions, all of which produce unrivaled distortion-free line of sight for what lies ahead. The flat Icon TracShield is available for the AIRFRAME PRO as a factory solution for riders who require tear-offs. Compatible with our RapidRelease shield change mechanism, the TracShield can be used on the AIRFRAME PRO and AIRMADA helmets. Interior The five-piece sweat wicking Hydradry liner provides a greater amount of fitment combinations for each unique head shape. Crown, later, fore and aft padding components allow for a possibility of 27 combinations in a single shell,
double that of the Airframe Pro’s competitors. Icon Tracshield The flat Icon TracShield™ is available for the Airframe Pro as a factory solution for riders who require tear-offs. Compatible with our Rapid Release™ shield change mechanism, the TracShield™ can be used on the Airframe Pro and Airmada helmets, and is available in Dark Smoke, Clear, Yellow, and RST Silver. Tear-offs are available separately. Icon Optics Shield All Icon Optics™ shields include the exclusive Rapid Release™ system for the easiest shield removal and replacement on the market. Icon® shields are available in a variety of tints and styles all with a fog-free coating, perfect for any riding situation you may find yourself in.Note Please note that as long as nothing else is written in the article
description, all helmets that have a visor as standard will be delivered with a clear one, even if it is shown differently.

Availability: Out Of Stock
Supplier: Motoin SE
SKU: 48469

Description Reviews / Comments Add New

Product Description

There’s no time to remove your hat when the American flag flies by you at Mach ten. Moving while standing still, the Airframe Pro MAX FLASH looks so fast it comes preloaded with felony-level infractions. The graphics do the talkin’, while the “ Angle of Attack” orientation does the walkin’ (i.e. ridin’). World Standard Meets DOT FMVSS 218 (US), ECE 22-05 (Europe), SAI AS1698:2006 (Australia) & PSC (Japan) Helmet Safety Standards. Shield Fog-Free Icon Optics™ shield with Rapid-Release™ system & Pro Lock™ positive shield locking system. Also fits Icon Tracshield™ with tear-off posts. Liner Five-Piece Modular Liner With Moisture-Wicking Hydradry™ Liner. Shell Handmade composite shell, h&-applied design, & precision manufacturing techniques. Intermediate oval fit The most common helmet fit type, the Intermediate Oval head is slightly shorter front-to-back & a little wider side-to-side. Best venting 9 air intakes & 7 exhaust ports coupled with deep channeling in the interior energy absorbing EPS foam results in superior helmet venting. Wight Precision assembly techniques help us to dramatically reduce the shell profile & allow us to to craft a helmet that is exceptionally light. Exterior A decrease of both drag & weight was achieved by sculpting the traditional neckline of the AFP to avoid jacket or suit interference. With a total of nine intakes & five exhaust vents, ventilation is a premier feature the AIRFRAME PRO. The forehead vents are angled to provide linear at speed while deep -channels in the liner enhances airflow by routing more air effectively. Shield The Rapid release shield removal system means that you can swap the fog-free Icon Optics shield in the blink of an eye. This cutting-edge system means that you can select the right shield for the conditions, all of which produce unrivaled distortion-free line of sight for what lies ahead. The flat Icon Trac Shield is available for the AIRFRAME PRO as a factory solution for riders who require tear-offs. Compatible with our Rapid Release shield change mechanism, the Trac Shield can be used on the AIRFRAME PRO & AIRMADA helmets. Interior The five-piece sweat wicking Hydradry liner provides a greater amount of fitment combinations for each unique head shape. Crown, later, fore & aft padding components allow for a possibility of 27 combinations in a single shell, double that of the Airframe Pro’s competitors. Icon Tracshield The flat Icon Trac Shield™ is available for the Airframe Pro as a factory solution for riders who require tear-offs. Compatible with our Rapid Release™ shield change mechanism, the Trac Shield™ can be used on the Airframe Pro & Airmada helmets, & is available in Dark Smoke, Clear, Yellow, & RST Silver. Tear-offs are available separately. Icon Optics Shield All Icon Optics™ shields include the exclusive Rapid Release™ system for the easiest shield removal & replacement on the market. Icon® shields are available in a variety of tints & styles all with a fog-free coating, perfect for any riding situation you may find yourself in. Note Please note that as long as nothing else is written in the article description, all helmets that have a visor as standard will be delivered with a clear one, even if it is shown differently.

Reviews/Comments

Add New

Jargon Buster

Jacket - A type of garment worn on the upper body usualy outdoors. Also know as an anorak or parka

Japan - An island in east Asia

Silver - A colour based on the colour of the metal

Silver - A chemical element, metalic. Has the highest elctrical conductance of any element. Also known for its exceptional anitmicrobal properties

Foam - A stubstance formed by trapping air in a solid or liquid

Helmet - A form of protection worn on the head to prevent injury

Eye - An organ which detects light

Hand - A part of the body at the end of the arm

Hand - A pointer which indicates time on a clock face

Yellow - A primary colour. The sun is often described as yellow

flag - A piece of material flown from a mast used symbolically for identification.

hat - A head covering worn for protection, religious reasons or as a fashion accessory.

Graphics - A general term for visual aspects of an item/display

Dark - A colour which absorbs visable ligt so apears less light than objects that reflect light

World - A physical grouping, commonly used to describe earth and everything associated with ti

weight - A measure of the force applied on an object by gravity. Measured metric in grams and kilos or imperial in lbs and oz

speed - A measurement of how fast an object travels between two points

edge - Enhanced data rates for GSM evolution also known as enhanced GPRS. A mobile phone technology with improved data transmission rates.

edge - The point at which two surfaces meet

cutting - The seperation of an object usually using a cutting tool such as a knife

Weight - a measurement of how heavy an object appears due to the pull of gravity. For example the weight of an object on planet earth will be different to the weight of the object on the moon

Safety - prevents damage being caused.

Components - Multiple items used to complete the product.

Shell - A hard external structure or surface.

Traditional - Something that has become the same through a period of time and thus repeated.

Traditional - Something that has been around for a while and is repeated regularly.

Ventilation - Giving fresh air to a room on someone's lungs.

Exclusive - Something that is not including other things.

Assembly - A gathering of people for a purpose e.g. a school assembly

Design - A drawing or styles that shows the look and functionality of something before its made.

Exterior - The outer of something usually what is visible.

Interior - The inside of something, usually what is not visible.

Feature - An attribute that makes something stand out.

Assembly - A gathering of people all together for the same purpose.

Head - The upper part of a body typically separated by the neck.

More From Contributor

Icon Airframe Pro Max Flash, Integral Helmet

Product Description

Reviews/Comments

Add New

Intelligent Comparison

Price History

Vouchers

Facebook

Jargon Buster

Supplier Information

Community Generated Product Tags

Contact Us

Information

My Account