Features World Standard, meets DOT FMVSS 218 (US), ECE 22-05 (EUROPE), & PSC (JAPAN) Helmet Safety Standards (does not ship with PSC certification stickers unless purchased from an authorized dealer in that country) Handcrafted Composite Fiber shell Four unique shell sizes for minimized mass & drag Sculpted neck roll reduces jacket/suit interference Five-piece modular liner with moisture-wicking Hydradry fabric Linear ported forehead vents Low-profile vents throughout the shell Fog-Free Icon Optics™ Shield with Rapid-Release™ System Prolock positive shield locking system Removable breath deflector & chin curtain Trac Shield shield with tear-off posts available (sold separately) Fit The most common helmet fit type, the intermediate oval head, is slightly shorter front-to-back & a little wider side-to-side. Venting 9 air intakes & 7 exhaust ports coupled with deep channeling in the interior energy absorbing EPS foam results in superior helmet venting. Weight Precision assembly techniques helps Icon to dramatically reduce the shell profile & allows Icon to craft a helmet that is exceptionally light. Exterior A decrease of both drag & weight was achieved by sculpting the traditional neckline of the AFP to avoid jacket or suit interference. With a total of nine intakes & five exhaust vents, ventilation is a premier feature of the Airframe Pro. The forehead vents are angled to provide linear at speed, while deep-channels in the liner enhances airflow by routing more air effectively. Shield The rapid release shield removal system means that you can swap the fog-free Icon Optics shield in the blink of an eye. This cutting-edge system means that you can select the right shield for the conditions, all of which produce unrivaled distortion-free line of sight for what lies ahead. The flat Icon Trac Shield is available for the Airframe Pro as a factory solution for riders who require tear-offs. Compatible with our rapid release shield change mechanism, the Trac Shield can be used on the Airframe Pro & Airmada helmets. Interior The five-piece sweat wicking Hydradry liner provides a greater amount of fitment combinations for each unique head shape. Crown, later, fore & aft padding components allow for a possibility of 27 combinations in a single shell, double that of the Airframe Pro’s competitors. Note Please be aware, as long as nothing else is written in the item description: All helmets will be delivered only with the ECE certification by default, even if it is shown differently. All helmets that have a visor will be delivered with a clear visor, even if it is shown differently. ...

The Tracshield is a flat-profile Version of our Optics shield with two posts, allowing for the use of tear-offs. Manufactured in a 3D molding process for optical clarity & with antifog coating. Note, your side plates cannot be used in conjunction with Tracshield. Features ECE R22.06 certified shield Pre-installed pins for tear-offs Prolock visor lock Suitable for Icon Airframe Pro Icon Airform Safety notice-Visors Tinted Visors marked with the statement “ If tinted. For Daytime use only” or the EU Sun pictogram marking are not suitable for use during the hours of twilight, darkness or in conditions of poor visibility or inclement weather. Colored Visors that prevent the recognition of road signals are not suitable for on-road use. Be sure to choose a Visor that is appropriate for the conditions it will be used in. Make sure any Visor being used is always in perfect condition & that no damage or wear obscures the riders view through the Visor. ...

The Tracshield is a flat-profile Version of our Optics shield with two posts, allowing for the use of tear-offs. Manufactured in a 3D molding process for optical clarity & with antifog coating. Note, your side plates cannot be used in conjunction with Tracshield. Features ECE R22.06 certified shield Pre-installed pins for tear-offs Prolock visor lock Suitable for Icon Airframe Pro Icon Airform Safety notice-Visors Tinted Visors marked with the statement “ If tinted. For Daytime use only” or the EU Sun pictogram marking are not suitable for use during the hours of twilight, darkness or in conditions of poor visibility or inclement weather. Colored Visors that prevent the recognition of road signals are not suitable for on-road use. Be sure to choose a Visor that is appropriate for the conditions it will be used in. Make sure any Visor being used is always in perfect condition & that no damage or wear obscures the riders view through the Visor. ...

The Tracshield is a flat-profile Version of our Optics shield with two posts, allowing for the use of tear-offs. Manufactured in a 3D molding process for optical clarity & with antifog coating. Note, your side plates cannot be used in conjunction with Tracshield. Features ECE R22.06 certified shield Pre-installed pins for tear-offs Prolock visor lock Suitable for Icon Airframe Pro Icon Airform Safety notice-Visors Tinted Visors marked with the statement “ If tinted. For Daytime use only” or the EU Sun pictogram marking are not suitable for use during the hours of twilight, darkness or in conditions of poor visibility or inclement weather. Colored Visors that prevent the recognition of road signals are not suitable for on-road use. Be sure to choose a Visor that is appropriate for the conditions it will be used in. Make sure any Visor being used is always in perfect condition & that no damage or wear obscures the riders view through the Visor. ...

The Tracshield is a flat-profile Version of our Optics shield with two posts, allowing for the use of tear-offs. Manufactured in a 3D molding process for optical clarity & with antifog coating. Note, your side plates cannot be used in conjunction with Tracshield. Features ECE R22.06 certified shield Pre-installed pins for tear-offs Prolock visor lock Suitable for Icon Airframe Pro Icon Airform Safety notice-Visors Tinted Visors marked with the statement “ If tinted. For Daytime use only” or the EU Sun pictogram marking are not suitable for use during the hours of twilight, darkness or in conditions of poor visibility or inclement weather. Colored Visors that prevent the recognition of road signals are not suitable for on-road use. Be sure to choose a Visor that is appropriate for the conditions it will be used in. Make sure any Visor being used is always in perfect condition & that no damage or wear obscures the riders view through the Visor. ...

Replacement cheek pads for the following Icon Helmets:

Features: VARIANT ...

Pinlock lens for the Icon Airframe, Alliance & Alliance GT modells. ...

Pinlock lens for the Icon Airframe, Alliance & Alliance GT modells. Here you find some information about Pinlock Anti-Fog lenses ...

Pinlock lens for the Icon Airframe, Alliance & Alliance GT modells. Here you find some information about Pinlock Anti-Fog lenses ...

If you re in the market for some hot times & busty moments, look no further than the Airmada™ Azrael. She s here to make the disappointment about your favorite series finale a thought of the past. Now you can relive your own ending with a dragon large enough to devour a horse & a bikini so small it would make all the D&D nerds blush. Ride the wind, feel the fire, fulfill your dragon desires. World Standard Meets DOT FMVSS 218 (US) ECE 22-05 (Europe) PSC (Japan) (Does not ship with PSC certification stickers) Shield Fog-Free Icon Optics™ shield with Rapid-Release™ system & Pro Lock™ positive shield locking system. Also fits Icon Tracshield™ with tear-off posts. Liner Sublimated Hydradry™ moisture wicking liner. Shell Injection molded polycarbonate shell for strength & durability. Long oval fit The head is long front-to-back & is narrow side-to-side. This shape offers additional forehead room for those who find that most helmets have pressure points in the forehead. Venting 6 air intakes & 4 exhaust ports combined with deep channeling in the interior energy absorbing EPS foam keeps your head cool, reducing rider fatigue. Light weight A reduced shell profile helps reduce overall weight, while maintaining the the exclusive World Standard of ICON to suit your riding style. Exterior The Airmada fits extremely close to the head by virtue of its low profile shell. in addition, the Airmada features a recessed twin-channel supervent with integrated spoiler to reduce helmet buffeting at high speeds. Shield The Rapid release shield removal system means that you can swap the fog-free Icon Optics shield in the blink of an eye. This cutting-edge system means that you can select the right shield for the conditions, all of which produce unrivaled distortion-free line of sight for what lies ahead. Interior The energy absorbing EPS foam liner uses our rider-preferred longer oval head form for a personalized fit without wasting an ounce of space. Combine that with superior venting, removable breath deflector, & a washable Hydradry moisture wicking interior creates a nearly perfect rider-focused enclosure. Once on you may never want to take it off. Icon Optics shield Designed to fit Airframe Pro & Airmada helmets. The Icon Optics™ shield is fitted with a helmet shield lock to keep your shield securely closed. Sideplates (sold separately) mount to each side of the Icon Optics shield for a more custom, finished look. Icon Tracshield The flat Icon Trac Shield™ is available for the Airmada as a factory solution for riders who require tear-offs. Compatible with our Rapid Release™ shield change mechanism, the Trac Shield™ can be used on the Airframe Pro & Airmada helmets, & is available in Dark Smoke, Clear, Yellow, & RST Silver. Tear-offs are available separately. Note Please note that as long as nothing else is written in the article description, all helmets that have a visor as standard will be delivered with a clear one, even if it is shown differently. ...