HIGHSIDER LED sequence turn signal STS 1, E-approved for front & rear suitable. Shapely turn signal housing made from aluminum. Dark glass, clear edges alternating with slight curves give the turn signal a modern design. With the STS 1 LED turn signal, which fits excellently to pretty much any machine, is now blinked thanks to modern running light system contemporary & the motorcycle expanded by a special design element. The LED technology with its many individual light sources makes it possible: When the individual LEDs light up one after the other during flashing, an optical wiping effect is created, a kind of luminous band from the inside to the outside. Known by some well-known car manufacturers, this modern technology is now also available for the motorcycle.

Dimensions

Width: 68 mm Width with handle: 82 mm

Height: 20 mm

Depth: 23 mm Threaded bolt: M8 x 20 mm Connections Yellow cable = turn signal (+) Black cable = ground (-) Variants 203-220
- Black/ Silver 203-221
- Black Scope of delivery 1 pair of LED sequence indicators Note LED turn signals operate on less wattage than standard turn signals. Therefore, it may be necessary to replace the original relay with a load-independent relay.









...

HIGHSIDER LED sequence turn signal STS 1, E-approved for front & rear suitable. Shapely turn signal housing made from aluminum. Dark glass, clear edges alternating with slight curves give the turn signal a modern design. With the STS 1 LED turn signal, which fits excellently to pretty much any machine, is now blinked thanks to modern running light system contemporary & the motorcycle expanded by a special design element. The LED technology with its many individual light sources makes it possible: When the individual LEDs light up one after the other during flashing, an optical wiping effect is created, a kind of luminous band from the inside to the outside. Known by some well-known car manufacturers, this modern technology is now also available for the motorcycle.

Dimensions

Width: 68 mm Width with handle: 82 mm

Height: 20 mm

Depth: 23 mm Threaded bolt: M8 x 20 mm Connections Yellow cable = turn signal (+) Black cable = ground (-) Variants 203-220
- Black/ Silver 203-221
- Black Scope of delivery 1 pair of LED sequence indicators Note LED turn signals operate on less wattage than standard turn signals. Therefore, it may be necessary to replace the original relay with a load-independent relay.









...

Adapter cable for connection of accessory tail lights with 3.5 mm round plugs to the original wiring harness of your machine. Features For easy & fast tail light conversion without soldering or crimping Avoids the removal of the socket on the original wiring harness Therefore at any time again retrofittable with the original turn signals Note It may be that the cable assignment differs on some models! Then simply connect according to the original: Yellow = driving light Red = brake light Black = Ground Usage Variant 207-040
- Type 2
- Suitable for connection to a bulb socket (BAY15D) Variant 207-041
- Type 5
- Suitable for connection to a glass base socket (W3x 16Q) Variant 207-042
- Type 1
- for div. Kawasaki/ Suzuki/ Yamaha Variant 207-043
- Type 3
- for div. Suzuki/ Yamaha Variant 207-044
- Type 4
- for div. Suzuki/ Yamaha Variant 207-045
- Type 6
- for div. Honda Variant 207-046
- Type 7
- for div. Honda/ Kawasaki Variant 207-047
- Type 8
- for div. Ducati Variante 396-045
- BMW div. S...
















...

Adapter cable for connection of accessory tail lights with 3.5 mm round plugs to the original wiring harness of your machine. Features For easy & fast tail light conversion without soldering or crimping Avoids the removal of the socket on the original wiring harness Therefore at any time again retrofittable with the original turn signals Note It may be that the cable assignment differs on some models! Then simply connect according to the original: Yellow = driving light Red = brake light Black = Ground Usage Variant 207-040
- Type 2
- Suitable for connection to a bulb socket (BAY15D) Variant 207-041
- Type 5
- Suitable for connection to a glass base socket (W3x 16Q) Variant 207-042
- Type 1
- for div. Kawasaki/ Suzuki/ Yamaha Variant 207-043
- Type 3
- for div. Suzuki/ Yamaha Variant 207-044
- Type 4
- for div. Suzuki/ Yamaha Variant 207-045
- Type 6
- for div. Honda Variant 207-046
- Type 7
- for div. Honda/ Kawasaki Variant 207-047
- Type 8
- for div. Ducati Variante 396-045
- BMW div. S...
















...

Adapter cable for connection of accessory tail lights with 3.5 mm round plugs to the original wiring harness of your machine. Features For easy & fast tail light conversion without soldering or crimping Avoids the removal of the socket on the original wiring harness Therefore at any time again retrofittable with the original turn signals Note It may be that the cable assignment differs on some models! Then simply connect according to the original: Yellow = driving light Red = brake light Black = Ground Usage Variant 207-040
- Type 2
- Suitable for connection to a bulb socket (BAY15D) Variant 207-041
- Type 5
- Suitable for connection to a glass base socket (W3x 16Q) Variant 207-042
- Type 1
- for div. Kawasaki/ Suzuki/ Yamaha Variant 207-043
- Type 3
- for div. Suzuki/ Yamaha Variant 207-044
- Type 4
- for div. Suzuki/ Yamaha Variant 207-045
- Type 6
- for div. Honda Variant 207-046
- Type 7
- for div. Honda/ Kawasaki Variant 207-047
- Type 8
- for div. Ducati Variante 396-045
- BMW div. S...
















...

Adapter cable for connection of accessory tail lights with 3.5 mm round plugs to the original wiring harness of your machine. Features For easy & fast tail light conversion without soldering or crimping Avoids the removal of the socket on the original wiring harness Therefore at any time again retrofittable with the original turn signals Note It may be that the cable assignment differs on some models! Then simply connect according to the original: Yellow = driving light Red = brake light Black = Ground Usage Variant 207-040
- Type 2
- Suitable for connection to a bulb socket (BAY15D) Variant 207-041
- Type 5
- Suitable for connection to a glass base socket (W3x 16Q) Variant 207-042
- Type 1
- for div. Kawasaki/ Suzuki/ Yamaha Variant 207-043
- Type 3
- for div. Suzuki/ Yamaha Variant 207-044
- Type 4
- for div. Suzuki/ Yamaha Variant 207-045
- Type 6
- for div. Honda Variant 207-046
- Type 7
- for div. Honda/ Kawasaki Variant 207-047
- Type 8
- for div. Ducati Variante 396-045
- BMW div. S...
















...

Adapter cable for connection of accessory tail lights with 3.5 mm round plugs to the original wiring harness of your machine. Features For easy & fast tail light conversion without soldering or crimping Avoids the removal of the socket on the original wiring harness Therefore at any time again retrofittable with the original turn signals Note It may be that the cable assignment differs on some models! Then simply connect according to the original: Yellow = driving light Red = brake light Black = Ground Usage Variant 207-040
- Type 2
- Suitable for connection to a bulb socket (BAY15D) Variant 207-041
- Type 5
- Suitable for connection to a glass base socket (W3x 16Q) Variant 207-042
- Type 1
- for div. Kawasaki/ Suzuki/ Yamaha Variant 207-043
- Type 3
- for div. Suzuki/ Yamaha Variant 207-044
- Type 4
- for div. Suzuki/ Yamaha Variant 207-045
- Type 6
- for div. Honda Variant 207-046
- Type 7
- for div. Honda/ Kawasaki Variant 207-047
- Type 8
- for div. Ducati Variante 396-045
- BMW div. S...
















...

Adapter cable for connection of accessory tail lights with 3.5 mm round plugs to the original wiring harness of your machine. Features For easy & fast tail light conversion without soldering or crimping Avoids the removal of the socket on the original wiring harness Therefore at any time again retrofittable with the original turn signals Note It may be that the cable assignment differs on some models! Then simply connect according to the original: Yellow = driving light Red = brake light Black = Ground Usage Variant 207-040
- Type 2
- Suitable for connection to a bulb socket (BAY15D) Variant 207-041
- Type 5
- Suitable for connection to a glass base socket (W3x 16Q) Variant 207-042
- Type 1
- for div. Kawasaki/ Suzuki/ Yamaha Variant 207-043
- Type 3
- for div. Suzuki/ Yamaha Variant 207-044
- Type 4
- for div. Suzuki/ Yamaha Variant 207-045
- Type 6
- for div. Honda Variant 207-046
- Type 7
- for div. Honda/ Kawasaki Variant 207-047
- Type 8
- for div. Ducati Variante 396-045
- BMW div. S...
















...

Adapter cable for connection of accessory tail lights with 3.5 mm round plugs to the original wiring harness of your machine. Features For easy & fast tail light conversion without soldering or crimping Avoids the removal of the socket on the original wiring harness Therefore at any time again retrofittable with the original turn signals Note It may be that the cable assignment differs on some models! Then simply connect according to the original: Taillight = yellow cable brake light = red cable Turn signal left = blue cable Turn signal right = blue/white cable License plate light = yellow/black cable Ground (-) = 2X black cable Usage Variant 396-044
- Triumph 1200 Thruxton 2016- Scope of delivery 1 piece adapter cable
...

HIGHSIDER TETRA handlebar end mirror, bead blasted black satin finish, E-approved. In the shape of a triangle, the HIGHSIDER TETRA handlebar end mirror scores with its cheeky design & creates variety. With this unusual handlebar end mirror you can design your bike in detail according to your ideas. It underlines your style, looks modern & individual at the same time. The rear-view mirror housing & the stem are made from aluminum, the finely bead-blasted surface satin. A corrosion-resistant stainless steel ball clamp allows precise adjustment of the mirror. Additional adjustment is possible with a joint on the clamp. Mirror head can be turned inward or outward by Allen wrench for enhanced visibility. Usable for 1 & 7/8 inch steering tube diameter, so for most aluminum & steel handlebars. The handlebar end mirror can be mounted on the right or left, as well as standing up or hanging down. Mountable either with the supplied reducing bushings directly on the steering tube or on opt... ...