HIGHSIDER 5 3/4 inch main headlight SKYLINE with LED parking light ring. The innovation for your safety
- the SKYLINE model is
...

This LED license plate light can be placed inconspicuously due to its extremely small design. Self-adhesive, allows many mounting positions for the legally required complete illumination of the license plate. The license plate light has an E-mark & requires no further papers. Tailor-made for your bike
- the extensive range of accessories from HIGHSIDER is perfectly tailored to your motorcycle. With the highest level of quality & functionality, you can thus easily design your bike according to your wishes.

Dimensions

Height: 6.5 mm

Width: 16 mm

Depth: 10 mm Connections White = Plus (+) Black = Ground (-) Scope of delivery 1 piece license plate light 256-065








...

HIGHSIDER LED taillight / brake light STRING. Super flat, splash-proof LED tail light for the very individual rear conversion, E-approved. The best is saved for last
- HIGHSIDER s taillight & taillight/turn signal series give you the safety you need & the look you want
- whether cruiser, scooter or speedster.

Dimensions

Width: 126 mm

Height: 9 mm

Depth: 10, 5 mm Variants 255-200
- red glass 255-201
- tinted glass Scope of delivery 1 piece rear light Self-adhesive foil for mounting











...

HIGHSIDER LED taillight / brake light STRING. Super flat, splash-proof LED tail light for the very individual rear conversion, E-approved. The best is saved for last
- HIGHSIDER s taillight & taillight/turn signal series give you the safety you need & the look you want
- whether cruiser, scooter or speedster.

Dimensions

Width: 126 mm

Height: 9 mm

Depth: 10, 5 mm Variants 255-200
- red glass 255-201
- tinted glass Scope of delivery 1 piece rear light Self-adhesive foil for mounting











...

HIGHSIDER STRIPE Power-LED turn signals in a black plastic housing, E-approved for front & rear. Head in the right direction
-
...

HIGHSIDER STRIPE LED turn signal, E-approved for front & rear. Power LED turn signals in a black anodized aluminum housing with bracket for mounting on the mirror. Head in the right direction
- with the innovative turn signal series from HIGHSIDER. Show not only where you want to go, but also who you are. This is directional design at its finest.

Dimensions

Width: 57.5 mm

Height: 11.2 mm

Depth: 23.5 mm Height with holder: 33 mm Connections Yellow cable = turn signal (+) Black cable = ground (-) Scope of delivery 1 pair of turn signal 204-105








...

HIGHSIDER STRIPE-RUN MODULE sequence turn signal, E-approved for front & rear. The modern turn signal module with built-in running light system is suitable for mounting or installation. For example, for laminating, gluing or other installation variants in fairings. The LED technology with its many individual light sources makes it possible: When the individual LEDs light up one after the other when flashing, an optical wiping effect is created, a kind of luminous band from the inside to the outside as in current passenger car models. The trendy sequence blinker with a robust plastic housing & tinted glass is a real eye-catcher in road traffic. In the right direction
- with the innovative turn signal series from HIGHSIDER you not only show where you want to go, but also who you are. This is directional design at its best.

Dimensions

Width: 53.5 mm

Height: 7 mm

Depth: 18 mm Connections Yellow cable = turn signal (+) Black cable = ground (-) Scope of delivery 1 pair of sequence indica...








...

HIGHSIDER LED sequence turn signal STS 1, E-approved for front & rear suitable. Shapely turn signal housing made from aluminum. Dark glass, clear edges alternating with slight curves give the turn signal a modern design. With the STS 1 LED turn signal, which fits excellently to pretty much any machine, is now blinked thanks to modern running light system contemporary & the motorcycle expanded by a special design element. The LED technology with its many individual light sources makes it possible: When the individual LEDs light up one after the other during flashing, an optical wiping effect is created, a kind of luminous band from the inside to the outside. Known by some well-known car manufacturers, this modern technology is now also available for the motorcycle.

Dimensions

Width: 68 mm Width with handle: 82 mm

Height: 20 mm

Depth: 23 mm Threaded bolt: M8 x 20 mm Connections Yellow cable = turn signal (+) Black cable = ground (-) Variants 203-220
- Black/ Silver 203-221
- Black Scope of delivery 1 pair of LED sequence indicators Note LED turn signals operate on less wattage than standard turn signals. Therefore, it may be necessary to replace the original relay with a load-independent relay.









...

HIGHSIDER LED sequence turn signal STS 1, E-approved for front & rear suitable. Shapely turn signal housing made from aluminum. Dark glass, clear edges alternating with slight curves give the turn signal a modern design. With the STS 1 LED turn signal, which fits excellently to pretty much any machine, is now blinked thanks to modern running light system contemporary & the motorcycle expanded by a special design element. The LED technology with its many individual light sources makes it possible: When the individual LEDs light up one after the other during flashing, an optical wiping effect is created, a kind of luminous band from the inside to the outside. Known by some well-known car manufacturers, this modern technology is now also available for the motorcycle.

Dimensions

Width: 68 mm Width with handle: 82 mm

Height: 20 mm

Depth: 23 mm Threaded bolt: M8 x 20 mm Connections Yellow cable = turn signal (+) Black cable = ground (-) Variants 203-220
- Black/ Silver 203-221
- Black Scope of delivery 1 pair of LED sequence indicators Note LED turn signals operate on less wattage than standard turn signals. Therefore, it may be necessary to replace the original relay with a load-independent relay.









...

Adapter cable for connection of accessory tail lights with 3.5 mm round plugs to the original wiring harness of your machine. Features For easy & fast tail light conversion without soldering or crimping Avoids the removal of the socket on the original wiring harness Therefore at any time again retrofittable with the original turn signals Note It may be that the cable assignment differs on some models! Then simply connect according to the original: Yellow = driving light Red = brake light Black = Ground Usage Variant 207-040
- Type 2
- Suitable for connection to a bulb socket (BAY15D) Variant 207-041
- Type 5
- Suitable for connection to a glass base socket (W3x 16Q) Variant 207-042
- Type 1
- for div. Kawasaki/ Suzuki/ Yamaha Variant 207-043
- Type 3
- for div. Suzuki/ Yamaha Variant 207-044
- Type 4
- for div. Suzuki/ Yamaha Variant 207-045
- Type 6
- for div. Honda Variant 207-046
- Type 7
- for div. Honda/ Kawasaki Variant 207-047
- Type 8
- for div. Ducati Variante 396-045
- BMW div. S...
















...