HIGHSIDER CONERO 3in 1 LED taillight, brake light, turn signal, E-approved for rear. High luminosity thanks to the latest COB technology (Chip On Board): due to the new LED chip embedding for high-performance LED, a very high luminance is achieved with currently the best possible efficiency & service life. In addition, higher light values than with conventional LEDs can be achieved despite heavily tinted glass. The black bead-blasted, cylindrical aluminum housing distinguish the noble, stylish design of this model. The HIGHSIDER CONERO series lives on a minimalist design & fits perfectly with undisguised motorcycles. The shapely & high-quality machined aluminum add-on parts give your roadster face & character. The HIGHSIDER CONERO series brings you back to the time when a motorcycle was just allowed to be a motorcycle
- reduced to ride, experience & experience. In the right direction
- with the innovative turn signal series from HIGHSIDER. Show not only where you want to go, but also who you are. This is directional design at its finest.

Dimensions A: 45 mm D: 15 mm Threaded stud: M8 x 1.25 mm Connections Black cable = ground (-) Blue cable = turn signal (+) Yellow cable = tail light (+) Red cable = brake light (+) Variants 254-033
- Black/ Silver 254-034
- Black/ Black (Black Edition) Scope of delivery 1 pair 3in 1 LED taillight, brake light, turn signal





...

HIGHSIDER CONERO 3in 1 LED taillight, brake light, turn signal, E-approved for rear. High luminosity thanks to the latest COB technology (Chip On Board): due to the new LED chip embedding for high-performance LED, a very high luminance is achieved with currently the best possible efficiency & service life. In addition, higher light values than with conventional LEDs can be achieved despite heavily tinted glass. The black bead-blasted, cylindrical aluminum housing distinguish the noble, stylish design of this model. The HIGHSIDER CONERO series lives on a minimalist design & fits perfectly with undisguised motorcycles. The shapely & high-quality machined aluminum add-on parts give your roadster face & character. The HIGHSIDER CONERO series brings you back to the time when a motorcycle was just allowed to be a motorcycle
- reduced to ride, experience & experience. In the right direction
- with the innovative turn signal series from HIGHSIDER. Show not only where you want to go, but also who you are. This is directional design at its finest.

Dimensions A: 45 mm D: 15 mm Threaded stud: M8 x 1.25 mm Connections Black cable = ground (-) Blue cable = turn signal (+) Yellow cable = tail light (+) Red cable = brake light (+) Variants 254-033
- Black/ Silver 254-034
- Black/ Black (Black Edition) Scope of delivery 1 pair 3in 1 LED taillight, brake light, turn signal





...

HIGHSIDER CONERO LED turn signals, E-approved for front & rear. Black aluminum housing, tinted glass, with the latest COB technology. Extremely bright despite heavily tinted glass. Packed in a cylindrical aluminum housing with polished bevels. The LED turn signal is part of our HIGHSIDER CONERO series. Head in the right direction
- with the innovative turn signal series from HIGHSIDER. Show not only where you want to go, but also who you are. This is directional design at its finest.

Dimensions A Diameter: 15 mm B

Width: Length: 45 mm Threaded stud: M 8x 1.25 Connections / Power consumption Yellow cable = turn signal (+) at 12.5V, 0.57A, 7.1W. Black cable = ground (-) at 13, 5V, 0, 69A, 9, 3W Variants 204-033
- Black/ Silver 204-034
- Black/ Black (Black Edition) Scope of delivery 1 pair of turn signals






...

HIGHSIDER CONERO LED turn signals, E-approved for front & rear. Black aluminum housing, tinted glass, with the latest COB technology. Extremely bright despite heavily tinted glass. Packed in a cylindrical aluminum housing with polished bevels. The LED turn signal is part of our HIGHSIDER CONERO series. Head in the right direction
- with the innovative turn signal series from HIGHSIDER. Show not only where you want to go, but also who you are. This is directional design at its finest.

Dimensions A Diameter: 15 mm B

Width: Length: 45 mm Threaded stud: M 8x 1.25 Connections / Power consumption Yellow cable = turn signal (+) at 12.5V, 0.57A, 7.1W. Black cable = ground (-) at 13, 5V, 0, 69A, 9, 3W Variants 204-033
- Black/ Silver 204-034
- Black/ Black (Black Edition) Scope of delivery 1 pair of turn signals






...

HIGHSIDER CONERO mirror, E-approved. Noble CNC-machined universal mirror with a round head made from anodized aluminum in black or black matt. Thanks to the use of a second joint on the stem, there are additional adjustment options for your safety. The slightly tinted & curved mirror glass offers optimal glare protection. Can be used for left & right side. The HIGHSIDER CONERO series lives on a minimalist design & fits perfectly to undisguised motorcycles. The shapely & high-quality machined aluminum add-on parts give your bike face & character. The HIGHSIDER CONERO series brings you back to the time when a motorcycle was just allowed to be a motorcycle
- reduced to ride, experience & experience. Character & overview
- whether retro or modern. The HIGHSIDER mirror series are characterized by characteristic design & aerodynamic function. That is circumspection in perfection.

Dimensions A/B Ø head: 98 mm C Total

Width: 170 mm D Overall height: 175 mm Stem length: 159 mm t...





...

Handlebar weights made from chrome-plated or black aluminum with chrome-plated or black central screw. Universal fit for handlebars with inner diameter from 12 to 22 mm
- therefore for most 7/8 inch & 1 inch aluminum or steel handlebars. All HIGHSIDER & SHIN YO brand hanging handlebar end mirrors with external clamp can be attached to the handlebar weights. Tailor-made for your bike
- the extensive range of accessories from HIGHSIDER is perfectly tailored to your motorcycle. With a maximum of quality & functionality, you can easily design your bike according to your wishes.

Dimensions Handlebar weight Diameter: 35.5 mm

Width: 17 mm Weight with attachments: 74 gr. Thread M6 x 1.25 mm Mounting for mirror Diameter: 29.8 mm

Width: 12 mm Variants 161-015
- Black 161-016
- Chrome plated Please check the

Dimensions for accuracy of fit before buying! Scope of delivery 1 piece, including mounting kit & universal clamping system: Each 2 x handlebar weights Each 2 x clamping sleeves D. 12 mm & D. 16 mm Each 2 x centering sleeves type 1, type 2, type 3. Each 2 x central screw black coated M6, toothed lock washer & cone nut M6.











...

Handlebar weights made from chrome-plated or black aluminum with chrome-plated or black central screw. Universal fit for handlebars with inner diameter from 12 to 22 mm
- therefore for most 7/8 inch & 1 inch aluminum or steel handlebars. All HIGHSIDER & SHIN YO brand hanging handlebar end mirrors with external clamp can be attached to the handlebar weights. Tailor-made for your bike
- the extensive range of accessories from HIGHSIDER is perfectly tailored to your motorcycle. With a maximum of quality & functionality, you can easily design your bike according to your wishes.

Dimensions Handlebar weight Diameter: 35.5 mm

Width: 17 mm Weight with attachments: 74 gr. Thread M6 x 1.25 mm Mounting for mirror Diameter: 29.8 mm

Width: 12 mm Variants 161-015
- Black 161-016
- Chrome plated Please check the

Dimensions for accuracy of fit before buying! Scope of delivery 1 piece, including mounting kit & universal clamping system: Each 2 x handlebar weights Each 2 x clamping sleeves D. 12 mm & D. 16 mm Each 2 x centering sleeves type 1, type 2, type 3. Each 2 x central screw black coated M6, toothed lock washer & cone nut M6.











...

Handlebar weights made from chrome-plated or black aluminum with chrome-plated or black central screw. Universal fit for handlebars with inner diameter from 12 to 22 mm
- i.e. for most 7/8 inch & 1 inch aluminum or steel handlebars. All hanging handlebar end mirrors of the brand HIGHSIDER & SHIN YO with external clamp can be attached to the handlebar weights. Tailor-made for your bike
- the extensive range of accessories from HIGHSIDER is perfectly tailored to your motorcycle. With a maximum of quality & functionality, you can easily design your bike according to your wishes.

Dimensions Handlebar weight Diameter: 35.5 mm

Width: 17 mm Weight with attachments: 74 gr. Thread M6 x 1.25 mm Mounting for mirror Diameter: 29.8 mm

Width: 12 mm Variants 161-017
- Chrome plated 161-018
- Black Please check the

Dimensions for fit before buying! Scope of delivery Each 2 x handlebar weights Each 2 x clamping sleeves D. 12 mm & D. 16 mm Each 2 x centering sleeves type 1, type 2, type 3. Each 2...











...

HIGHSIDER DUAL-STREAM LED headlight, black, E-approved. The small all-in-one ellipsoid headlight with round lens is a powerful LED main headlight in a black housing & sturdy holder. The special feature of the HIGHSIDER DUAL-STREAM is the parking light illuminated ring around the ellipsoidal lens & the shutter technology through which a mechanical shutter changes between high & low beam. Through the use of this modern LED technology, the smallest housing

Dimensions with the greatest possible light output can be realized. Our highlights
- give your bike an unmistakable style! The unusual design & perfect technology of the HIGHSIDER headlight series make it a highlight in any case!

Dimensions Diameter lens: approx. 45 mm

Height: 70.2 mm

Width: 67 mm

Depth: 96.5 mm Distance of mounting holes: 67 mm Lateral mounting holes: M 5 mm Material housing: aluminum Weight: 0, 230kg Power consumption 12V / 12W, 739.3 lm, low beam 12V / 19 W, 739.3 lm, high beam Connections Position light = br...










...

HIGHSIDER Electronic two-channel relay 6-14V. An electronic dual relay with inputs for all common push buttons or switches. It is possible to control the desired function via plus as well as via minus. If one of the two inputs is connected to ground or positive via a switch, the corresponding 12 V output is switched on. At the same time, the outputs can supply lines up to 40 W in continuous operation. Typical power consumers operated by non-latching pushbuttons (e.g. horn, low beam, high beam, etc.) can be controlled by the HIGHSIDER two channel relay. The use of the relay instead of a direct connection of the consumer to the switch, allows the use of smallest cable cross sections & push buttons with low current values. Example 1 You want to use a small push button with a low flow current, for example to switch a horn (high current consumption). To prevent the button from being damaged by the power it normally draws, you simply use this electronic relay. It means that you can use switches... ...