Back protector, certified according to EN 1621-2:2014, suitable for Held e Vest airbag vest, made by D3O. ...

Attention! With this product additional costs arise by the registration of the vest. The vest can be registered at www.inemotion.com or via the My In& Box App. You also need the My In& Box App to unlock & set up the vest. The Held e Vest is now also available with shoulder airbag & optimised ventilation. The autonomous airbag-vest can be integrated on the motorcycle without cables & external sensors. Universally usable, it can also be worn under suitable common motorcycle jackets. (For use on motorcycles or motor scooters. Is certified & meets all compatibility requirements) Material Air-permeable 3D mesh fabric on front & back Lining 3D Air-Mesh insert on back Comfort/ Features Anti-slip band on waistband Front zip Safety Electronic Held Air protection system by In& Motion Air-Bag protects back, thorax, shoulders, chest & ribs Pockets for retrofittable chest protector Held Exosafe by D3O, certified according to EN 1621-3:2018, Level 2 Hard shell elements on the back D3O back pr... ...

Attention! With this product additional costs arise by the registration of the vest. The vest can be registered at www.inemotion.com or via the My In& Box App. You also need the My In& Box App to unlock & set up the vest. The Held e Vest is now also available with shoulder airbag & optimised ventilation. The autonomous airbag-vest can be integrated on the motorcycle without cables & external sensors. Universally usable, it can also be worn under suitable common motorcycle jackets. (For use on motorcycles or motor scooters. Is certified & meets all compatibility requirements) Material Air-permeable 3D mesh fabric on front & back Lining 3D Air-Mesh insert on back Comfort/ Features Anti-slip band on waistband Front zip Safety Electronic Held Air protection system by In& Motion Air-Bag protects back, thorax, shoulders, chest & ribs Pockets for retrofittable chest protector Held Exosafe by D3O, certified according to EN 1621-3:2018, Level 2 Hard shell elements on the back D3O back pr... ...

Attention! With this product additional costs arise by the registration of the vest. The vest can be registered at www.inemotion.com or via the My In& Box App. You also need the My In& Box App to unlock & set up the vest. The Held e Vest is now also available with shoulder airbag & optimised ventilation. The autonomous airbag-vest can be integrated on the motorcycle without cables & external sensors. Universally usable, it can also be worn under suitable common motorcycle jackets. (For use on motorcycles or motor scooters. Is certified & meets all compatibility requirements) Material Air-permeable 3D mesh fabric on front & back Lining 3D Air-Mesh insert on back Comfort/ Features Anti-slip band on waistband Front zip Safety Electronic Held Air protection system by In& Motion Air-Bag protects back, thorax, shoulders, chest & ribs Pockets for retrofittable chest protector Held Exosafe by D3O, certified according to EN 1621-3:2018, Level 2 Hard shell elements on the back D3O back pr... ...

Attention! With this product additional costs arise by the registration of the vest. The vest can be registered at www.inemotion.com or via the My In& Box App. You also need the My In& Box App to unlock & set up the vest. The Held e Vest is now also available with shoulder airbag & optimised ventilation. The autonomous airbag-vest can be integrated on the motorcycle without cables & external sensors. Universally usable, it can also be worn under suitable common motorcycle jackets. (For use on motorcycles or motor scooters. Is certified & meets all compatibility requirements) Material Air-permeable 3D mesh fabric on front & back Lining 3D Air-Mesh insert on back Comfort/ Features Anti-slip band on waistband Front zip Safety Electronic Held Air protection system by In& Motion Air-Bag protects back, thorax, shoulders, chest & ribs Pockets for retrofittable chest protector Held Exosafe by D3O, certified according to EN 1621-3:2018, Level 2 Hard shell elements on the back D3O back pr... ...

Attention! With this product additional costs arise by the registration of the vest. The vest can be registered at www.inemotion.com or via the My In& Box App. You also need the My In& Box App to unlock & set up the vest. The Held e Vest is now also available with shoulder airbag & optimised ventilation. The autonomous airbag-vest can be integrated on the motorcycle without cables & external sensors. Universally usable, it can also be worn under suitable common motorcycle jackets. (For use on motorcycles or motor scooters. Is certified & meets all compatibility requirements) Material Air-permeable 3D mesh fabric on front & back Lining 3D Air-Mesh insert on back Comfort/ Features Anti-slip band on waistband Front zip Safety Electronic Held Air protection system by In& Motion Air-Bag protects back, thorax, shoulders, chest & ribs Pockets for retrofittable chest protector Held Exosafe by D3O, certified according to EN 1621-3:2018, Level 2 Hard shell elements on the back D3O back pr... ...

Attention! With this product additional costs arise by the registration of the vest. The vest can be registered at www.inemotion.com or via the My In& Box App. You also need the My In& Box App to unlock & set up the vest. The Held e Vest is now also available with shoulder airbag & optimised ventilation. The autonomous airbag-vest can be integrated on the motorcycle without cables & external sensors. Universally usable, it can also be worn under suitable common motorcycle jackets. (For use on motorcycles or motor scooters. Is certified & meets all compatibility requirements) Material Air-permeable 3D mesh fabric on front & back Lining 3D Air-Mesh insert on back Comfort/ Features Anti-slip band on waistband Front zip Safety Electronic Held Air protection system by In& Motion Air-Bag protects back, thorax, shoulders, chest & ribs Pockets for retrofittable chest protector Held Exosafe by D3O, certified according to EN 1621-3:2018, Level 2 Hard shell elements on the back D3O back pr... ...

Attention! For this product there are additional costs due to the registration of the vest. The vest have to be registered at www.inemotion.com or via the My In& Box App. You also need the My In& Box App to unlock & set up the vest. The autonomous airbag-vest can be integrated on the motorcycle without cables & external sensors. Universally usable, it can also be worn under suitable common motorcycle jackets. (For use on motorcycles or motor scooters. Is certified & meets all compatibility requirements) Features Back protector, certified according to EN 1621-2:2014 Protector pocket for retrofitting with SAS-Tec rib protector Velcro for retrofit Held chest protector Hard shell elements on the back Intelligent Protection System (IPS) Airbag Technology powered by In&motion Autonomy: 25 hours drive Protected areas are thorax, abdomen, spine & cervical vertebra Comfort/ Equipment Stretch fabric Held Clip-in Technology Front zipper F3D Air-Mesh insert on back Mesh inserts for enhanced breathability Content of delivery 1x e Vest 1x In&box control module (In&box is active for 48 hours after initial activation & must then be registered & activated separately via In&motion, which involves additional costs*) * Additional costs: Option " Regular" (buy) Once: 399, 00 € In&box: is yours Contract: resale possible Updates: yes Smartphone App: yes Warranty: 2 years Customer service: yes VIP Service: no (Engaged Hotine. You have a problem with your In&box? Get a new one as soon as possible.) Upgrade (to newest in&box generation): no Option " Revolution" (rent) 12 € per month or 120 € per year In&box: rented from in&motion Contract: can be terminated at any time Updates: yes Smartphone App: yes Guarantee: unlimited Customer service: yes VIP Service: yes (Dedicated Hotline. You have a problem with your In&box? Get a new one as soon as possible :-) Upgrade (to newest in&box generation): every 3 years Purchase option: 99 € (after 3 years) Track Mode (optional) Do you ride on the race track? In&motion technology supports you here too! Make sure that your suit is compatible & activate the track mode via the mobile app before you start. 8 € per month or 25 € per year The unique developable airbag technology Detect With 1000 analyzes/second, the In&box measures every user’s movement to detect a loss of balance Protect In less than 60 milliseconds, the airbag is inflated at the optimum pressure, protecting the user from impacts Perfect Thanks to the data collected, In&motion can regularly improve the system & detection strategy in order to better predict falls The Clip-in Technology The full flexibility & functionality in every situation. Wearing the same apparel on hot summer days as in the transition period with single-digit temperatures? No problem with the Held Clip-in technology. All Held jackets & trousers, which are equipped with the Clip-in feature can be retrofitted & upgraded with Held Clip-in products. On the specially coloured fixation loops, the Clip-in products are installed by press studs into the outer shell. With the blue coloured loops & press studs, the system is easily distinguishable from other fastening systems of the base garment like connecting zips, air-vents & removable membranes & linings. The individual Clip-in products can also be worn separately for any non-biking activity as leisure wear. Highlights Extension of functionality & application range of your motorcycle apparel Uncomplicated, easy installation into the base garment with press studs Blue colour scheme for easy identification Clip-in jacket & pants can also be used separately as leisure wear ...

Attention! For this product there are additional costs due to the registration of the vest. The vest have to be registered at www.inemotion.com or via the My In& Box App. You also need the My In& Box App to unlock & set up the vest. The autonomous airbag-vest can be integrated on the motorcycle without cables & external sensors. Universally usable, it can also be worn under suitable common motorcycle jackets. (For use on motorcycles or motor scooters. Is certified & meets all compatibility requirements) Features Back protector, certified according to EN 1621-2:2014 Protector pocket for retrofitting with SAS-Tec rib protector Velcro for retrofit Held chest protector Hard shell elements on the back Intelligent Protection System (IPS) Airbag Technology powered by In&motion Autonomy: 25 hours drive Protected areas are thorax, abdomen, spine & cervical vertebra Comfort/ Equipment Stretch fabric Held Clip-in Technology Front zipper F3D Air-Mesh insert on back Mesh inserts for enhanced b... ...

Attention! For this product there are additional costs due to the registration of the vest. The vest have to be registered at www.inemotion.com or via the My In& Box App. You also need the My In& Box App to unlock & set up the vest. The autonomous airbag-vest can be integrated on the motorcycle without cables & external sensors. Universally usable, it can also be worn under suitable common motorcycle jackets. (For use on motorcycles or motor scooters. Is certified & meets all compatibility requirements) Features Back protector, certified according to EN 1621-2:2014 Protector pocket for retrofitting with SAS-Tec rib protector Velcro for retrofit Held chest protector Hard shell elements on the back Intelligent Protection System (IPS) Airbag Technology powered by In&motion Autonomy: 25 hours drive Protected areas are thorax, abdomen, spine & cervical vertebra Comfort/ Equipment Stretch fabric Held Clip-in Technology Front zipper F3D Air-Mesh insert on back Mesh inserts for enhanced b... ...