Gaerne GMX-Mach 80 Motocross boots Back to the roots the new Gaerne GMX Mach 80 boot could also be named. With vintage charm, the boots fit perfectly with youngtimer enduros & today s scramblers. The boots were modelled on the 80s boots from Gaerne s company history. The Gaerne GMX Mach 80 boot is made in italy & is made from high quality materials. Features High-quality, hard-wearing cowhide With plastic shin protector (exchangeable) Highly comfortable fit Knuckle protection inside Shaft height approx. 35 cm Microfibre inner lining with ergonomically shaped inner padding Adjustable by a velcro & two buckles Anatomically shaped footbed Replaceable sole has a steel insole & is oil & petrol resistant Tip of the boot is protected with a steel cap With grippy & stable double stitched Gaerne Enduro sole Made in Italy

Sizes: 39 EU
- 48 EU


...

Gaerne GMX-Mach 80 Motocross boots Back to the roots the new Gaerne GMX Mach 80 boot could also be named. With vintage charm, the boots fit perfectly with youngtimer enduros & today s scramblers. The boots were modelled on the 80s boots from Gaerne s company history. The Gaerne GMX Mach 80 boot is made in italy & is made from high quality materials. Features High-quality, hard-wearing cowhide With plastic shin protector (exchangeable) Highly comfortable fit Knuckle protection inside Shaft height approx. 35 cm Microfibre inner lining with ergonomically shaped inner padding Adjustable by a velcro & two buckles Anatomically shaped footbed Replaceable sole has a steel insole & is oil & petrol resistant Tip of the boot is protected with a steel cap With grippy & stable double stitched Gaerne Enduro sole Made in Italy

Sizes: 39 EU
- 48 EU


...

Gaerne GMX-Mach 80 Motocross boots Back to the roots the new Gaerne GMX Mach 80 boot could also be named. With vintage charm, the boots fit perfectly with youngtimer enduros & today s scramblers. The boots were modelled on the 80s boots from Gaerne s company history. The Gaerne GMX Mach 80 boot is made in italy & is made from high quality materials. Features High-quality, hard-wearing cowhide With plastic shin protector (exchangeable) Highly comfortable fit Knuckle protection inside Shaft height approx. 35 cm Microfibre inner lining with ergonomically shaped inner padding Adjustable by a velcro & two buckles Anatomically shaped footbed Replaceable sole has a steel insole & is oil & petrol resistant Tip of the boot is protected with a steel cap With grippy & stable double stitched Gaerne Enduro sole Made in Italy

Sizes: 39 EU
- 48 EU


...

Gaerne GMX-Mach 80 Motocross boots Back to the roots the new Gaerne GMX Mach 80 boot could also be named. With vintage charm, the boots fit perfectly with youngtimer enduros & today s scramblers. The boots were modelled on the 80s boots from Gaerne s company history. The Gaerne GMX Mach 80 boot is made in italy & is made from high quality materials. Features High-quality, hard-wearing cowhide With plastic shin protector (exchangeable) Highly comfortable fit Knuckle protection inside Shaft height approx. 35 cm Microfibre inner lining with ergonomically shaped inner padding Adjustable by a velcro & two buckles Anatomically shaped footbed Replaceable sole has a steel insole & is oil & petrol resistant Tip of the boot is protected with a steel cap With grippy & stable double stitched Gaerne Enduro sole Made in Italy

Sizes: 39 EU
- 48 EU


...

Gaerne GMX-Mach 80 Motocross boots Back to the roots the new Gaerne GMX Mach 80 boot could also be named. With vintage charm, the boots fit perfectly with youngtimer enduros & today s scramblers. The boots were modelled on the 80s boots from Gaerne s company history. The Gaerne GMX Mach 80 boot is made in italy & is made from high quality materials. Features High-quality, hard-wearing cowhide With plastic shin protector (exchangeable) Highly comfortable fit Knuckle protection inside Shaft height approx. 35 cm Microfibre inner lining with ergonomically shaped inner padding Adjustable by a velcro & two buckles Anatomically shaped footbed Replaceable sole has a steel insole & is oil & petrol resistant Tip of the boot is protected with a steel cap With grippy & stable double stitched Gaerne Enduro sole Made in Italy

Sizes: 39 EU
- 48 EU


...

Gaerne GMX-Mach 80 Motocross boots Back to the roots the new Gaerne GMX Mach 80 boot could also be named. With vintage charm, the boots fit perfectly with youngtimer enduros & today s scramblers. The boots were modelled on the 80s boots from Gaerne s company history. The Gaerne GMX Mach 80 boot is made in italy & is made from high quality materials. Features High-quality, hard-wearing cowhide With plastic shin protector (exchangeable) Highly comfortable fit Knuckle protection inside Shaft height approx. 35 cm Microfibre inner lining with ergonomically shaped inner padding Adjustable by a velcro & two buckles Anatomically shaped footbed Replaceable sole has a steel insole & is oil & petrol resistant Tip of the boot is protected with a steel cap With grippy & stable double stitched Gaerne Enduro sole Made in Italy

Sizes: 39 EU
- 48 EU


...

The all-new GP1, the latest product from Gaerne’s research & development centre, is the ultimate racing boot! Close collaboration with Champions, technological innovation, attention to detail & comfort, Italian styling & fifty years of passion & experience characterize all Gaerne products. Features Gaerne Floating-System: The unique Gaerne Floating System, made from carbon composite, allows the foot to move naturally & prevents ankle twisting without compromising flexibility. At the back of the boot, & fixed at two points, it runs inside two slots that limit movement in both directions preventing hyper extension or compression. External polyurethane protectors minimize the impact of a fall & facilitate sliding Shock Absorbing Heel Cup: Non-deformable polyurethane heel cup is protected by a replaceable low-friction magnesium slider. Anti-shock heel features an internal comfort-enhancing decompression zone, located between the insole & sole, the inserts are highlighted externally in red. Adjustable Calf Closure System: Adjustable & replaceable BOA IP1 reel enables a custom-fit around the calf area Slider: High- wear-resistant magnesium toe slider allows for totally free foot movement. Attachment points are well away from the areas that normally suffer from abrasion Front Shin Plate: made from PU & anatomically shaped, it is easily replaceable via two screws. The nylon front slider is also interchangeable Closure System: The internal zip is protected by a rubber strip. An elastic insert in the ankle area facilitates the closure of the boot Upper Part: made from Lorica, a supple, comfortable & breathable high-tech material. Elasticized instep with polyurethane inserts ensure a snug fit & a high level of comfort & durability Gaitor: Air-vented polyurethane collar is resistant to heat & fits the calf perfectly Grip Guard: Two rubber inserts (inner calf & heel) provide additional grip & protect the leg from engine/exhaust heat Sole: Variable density, oil & wear-resistant, rubber sole features a unique design that provides excellent grip Inner Sole: Fully removable & washable anatomically designed foot-bed ensures even weight distribution & provides full support to all parts of the foot. The heel is reinforced with a special shock absorbing material & the toe-area is perforated for enhanced air flow Shifter Protection: Anatomically shaped polyurethane protector provides maximum feel when gear-shifting & additional toe protection Inner

Lining: Antibacterial & breathable pre-shaped inner lining for enhanced comfort & fit at shin, ankle & heel areas

...

The all-new GP1, the latest product from Gaerne’s research & development centre, is the ultimate racing boot! Close collaboration with Champions, technological innovation, attention to detail & comfort, Italian styling & fifty years of passion & experience characterize all Gaerne products. Features Gaerne Floating-System: The unique Gaerne Floating System, made from carbon composite, allows the foot to move naturally & prevents ankle twisting without compromising flexibility. At the back of the boot, & fixed at two points, it runs inside two slots that limit movement in both directions preventing hyper extension or compression. External polyurethane protectors minimize the impact of a fall & facilitate sliding Shock Absorbing Heel Cup: Non-deformable polyurethane heel cup is protected by a replaceable low-friction magnesium slider. Anti-shock heel features an internal comfort-enhancing decompression zone, located between the insole & sole, the inserts are highlighted externally in red. Adjustable Calf Closure System: Adjustable & replaceable BOA IP1 reel enables a custom-fit around the calf area Slider: High- wear-resistant magnesium toe slider allows for totally free foot movement. Attachment points are well away from the areas that normally suffer from abrasion Front Shin Plate: made from PU & anatomically shaped, it is easily replaceable via two screws. The nylon front slider is also interchangeable Closure System: The internal zip is protected by a rubber strip. An elastic insert in the ankle area facilitates the closure of the boot Upper Part: made from Lorica, a supple, comfortable & breathable high-tech material. Elasticized instep with polyurethane inserts ensure a snug fit & a high level of comfort & durability Gaitor: Air-vented polyurethane collar is resistant to heat & fits the calf perfectly Grip Guard: Two rubber inserts (inner calf & heel) provide additional grip & protect the leg from engine/exhaust heat Sole: Variable density, oil & wear-resistant, rubber sole features a unique design that provides excellent grip Inner Sole: Fully removable & washable anatomically designed foot-bed ensures even weight distribution & provides full support to all parts of the foot. The heel is reinforced with a special shock absorbing material & the toe-area is perforated for enhanced air flow Shifter Protection: Anatomically shaped polyurethane protector provides maximum feel when gear-shifting & additional toe protection Inner

Lining: Antibacterial & breathable pre-shaped inner lining for enhanced comfort & fit at shin, ankle & heel areas

...

The all-new GP1, the latest product from Gaerne’s research & development centre, is the ultimate racing boot! Close collaboration with Champions, technological innovation, attention to detail & comfort, Italian styling & fifty years of passion & experience characterize all Gaerne products. Features Gaerne Floating-System: The unique Gaerne Floating System, made from carbon composite, allows the foot to move naturally & prevents ankle twisting without compromising flexibility. At the back of the boot, & fixed at two points, it runs inside two slots that limit movement in both directions preventing hyper extension or compression. External polyurethane protectors minimize the impact of a fall & facilitate sliding Shock Absorbing Heel Cup: Non-deformable polyurethane heel cup is protected by a replaceable low-friction magnesium slider. Anti-shock heel features an internal comfort-enhancing decompression zone, located between the insole & sole, the inserts are highlighted externally in red. Adjustable Calf Closure System: Adjustable & replaceable BOA IP1 reel enables a custom-fit around the calf area Slider: High- wear-resistant magnesium toe slider allows for totally free foot movement. Attachment points are well away from the areas that normally suffer from abrasion Front Shin Plate: made from PU & anatomically shaped, it is easily replaceable via two screws. The nylon front slider is also interchangeable Closure System: The internal zip is protected by a rubber strip. An elastic insert in the ankle area facilitates the closure of the boot Upper Part: made from Lorica, a supple, comfortable & breathable high-tech material. Elasticized instep with polyurethane inserts ensure a snug fit & a high level of comfort & durability Gaitor: Air-vented polyurethane collar is resistant to heat & fits the calf perfectly Grip Guard: Two rubber inserts (inner calf & heel) provide additional grip & protect the leg from engine/exhaust heat Sole: Variable density, oil & wear-resistant, rubber sole features a unique design that provides excellent grip Inner Sole: Fully removable & washable anatomically designed foot-bed ensures even weight distribution & provides full support to all parts of the foot. The heel is reinforced with a special shock absorbing material & the toe-area is perforated for enhanced air flow Shifter Protection: Anatomically shaped polyurethane protector provides maximum feel when gear-shifting & additional toe protection Inner

Lining: Antibacterial & breathable pre-shaped inner lining for enhanced comfort & fit at shin, ankle & heel areas

...

The all-new GP1, the latest product from Gaerne’s research & development centre, is the ultimate racing boot! Close collaboration with Champions, technological innovation, attention to detail & comfort, Italian styling & fifty years of passion & experience characterize all Gaerne products. Features Gaerne Floating-System: The unique Gaerne Floating System, made from carbon composite, allows the foot to move naturally & prevents ankle twisting without compromising flexibility. At the back of the boot, & fixed at two points, it runs inside two slots that limit movement in both directions preventing hyper extension or compression. External polyurethane protectors minimize the impact of a fall & facilitate sliding Shock Absorbing Heel Cup: Non-deformable polyurethane heel cup is protected by a replaceable low-friction magnesium slider. Anti-shock heel features an internal comfort-enhancing decompression zone, located between the insole & sole, the inserts are highlighted externally in red. Adjustable Calf Closure System: Adjustable & replaceable BOA IP1 reel enables a custom-fit around the calf area Slider: High- wear-resistant magnesium toe slider allows for totally free foot movement. Attachment points are well away from the areas that normally suffer from abrasion Front Shin Plate: made from PU & anatomically shaped, it is easily replaceable via two screws. The nylon front slider is also interchangeable Closure System: The internal zip is protected by a rubber strip. An elastic insert in the ankle area facilitates the closure of the boot Upper Part: made from Lorica, a supple, comfortable & breathable high-tech material. Elasticized instep with polyurethane inserts ensure a snug fit & a high level of comfort & durability Gaitor: Air-vented polyurethane collar is resistant to heat & fits the calf perfectly Grip Guard: Two rubber inserts (inner calf & heel) provide additional grip & protect the leg from engine/exhaust heat Sole: Variable density, oil & wear-resistant, rubber sole features a unique design that provides excellent grip Inner Sole: Fully removable & washable anatomically designed foot-bed ensures even weight distribution & provides full support to all parts of the foot. The heel is reinforced with a special shock absorbing material & the toe-area is perforated for enhanced air flow Shifter Protection: Anatomically shaped polyurethane protector provides maximum feel when gear-shifting & additional toe protection Inner

Lining: Antibacterial & breathable pre-shaped inner lining for enhanced comfort & fit at shin, ankle & heel areas

...