The Fenix 3 WTR from Falco is a lightweight sports boot with ventilation, which creates a comfortable feeling. Due to some safety aspects, the boot is particularly well suited on the race track. Safety D3O® protectors incorporated in the ankle area ESO-MOTION 2.1® integrated joint system for ankle support Hard plastic shin & heel protector Reinforced toe & heel protection Shift protection through material doubling Black aluminum titanium grinder Certified according to EN13634:2017 Features High-Tex® membrane Elastic inserts for more comfortable foot movement Ventilation on shins, heels & calves Velcro & zipper Shaft

Height: approx. 32 cm Preformed, vibration-absorbing, orthopedic foot bed Waterproof Windproof Breathable Made on men s last Material Upper: tough & durable synthetic leather Inner

Lining: polyamide Sole Oil resistant & non-slip rubber sole D3O® D3O® impact protection was developed in the winter sports & military industries, & is the first time Falco has applied it to motorcycle boots. The intelligent D3O® molecules flow freely when you move slowly. In the event of an impact, these molecules come together to absorb the impact energy. The special protection of D3O® significantly reduces the impact force on the ankle area. HIGH-TEX® Tested Falco membrane against water penetration into the boot. The only scientific test to determine, define & indicate whether a motorcycle boot is waterproof is the mandatory EN 13634:2010 test, which consists of 100 steps on a suitable platform with a water level of 5 mm above the sole. Upon successful completion of this test, the boot is considered waterproof. ESO-motion 2 Multiple-pieces integrated articulation system to provide additional ankle support. Rear-button quick unlocking system for increased foot movement. Extended heel protector with shock absorbing wedge. ACF / MEN Constructive system of the boot made according to the anatomy of the man s foot. This technique allows a higher level of comfort, longer service life & adaptation to different driving conditions. Italian product Italian craftsmanship developed in over 20 years of motorcycle boot production, combined with certified & high quality materials & innovative construction solutions. Highly qualified technicians follow every step of production in sophisticated industrialization processes. The quality of Italian manufacturing is central to Falco s success. Certified according to EN-13634:2017 This product is compliant with European Directive 89/686/CEE & EU Regulation 2016/425. Certification to the EN 13634:2017 standard is achieved through laboratory testing. The European standard EN 13634

Includes:: two levels of performance in terms of the protection provided. Here, Level 1 is considered the minimum requirement. " Level 2" provides increased performance. These levels confirm abrasion resistance, cut resistance & hardness of the underside.





...

The Fenix 3 WTR from Falco is a lightweight sports boot with ventilation, which creates a comfortable feeling. Due to some safety aspects, the boot is particularly well suited on the race track. Safety D3O® protectors incorporated in the ankle area ESO-MOTION 2.1® integrated joint system for ankle support Hard plastic shin & heel protector Reinforced toe & heel protection Shift protection through material doubling Black aluminum titanium grinder Certified according to EN13634:2017 Features High-Tex® membrane Elastic inserts for more comfortable foot movement Ventilation on shins, heels & calves Velcro & zipper Shaft

Height: approx. 32 cm Preformed, vibration-absorbing, orthopedic foot bed Waterproof Windproof Breathable Made on men s last Material Upper: tough & durable synthetic leather Inner

Lining: polyamide Sole Oil resistant & non-slip rubber sole D3O® D3O® impact protection was developed in the winter sports & military industries, & is the first time Falco has applied it to motorcycle boots. The intelligent D3O® molecules flow freely when you move slowly. In the event of an impact, these molecules come together to absorb the impact energy. The special protection of D3O® significantly reduces the impact force on the ankle area. HIGH-TEX® Tested Falco membrane against water penetration into the boot. The only scientific test to determine, define & indicate whether a motorcycle boot is waterproof is the mandatory EN 13634:2010 test, which consists of 100 steps on a suitable platform with a water level of 5 mm above the sole. Upon successful completion of this test, the boot is considered waterproof. ESO-motion 2 Multiple-pieces integrated articulation system to provide additional ankle support. Rear-button quick unlocking system for increased foot movement. Extended heel protector with shock absorbing wedge. ACF / MEN Constructive system of the boot made according to the anatomy of the man s foot. This technique allows a higher level of comfort, longer service life & adaptation to different driving conditions. Italian product Italian craftsmanship developed in over 20 years of motorcycle boot production, combined with certified & high quality materials & innovative construction solutions. Highly qualified technicians follow every step of production in sophisticated industrialization processes. The quality of Italian manufacturing is central to Falco s success. Certified according to EN-13634:2017 This product is compliant with European Directive 89/686/CEE & EU Regulation 2016/425. Certification to the EN 13634:2017 standard is achieved through laboratory testing. The European standard EN 13634

Includes:: two levels of performance in terms of the protection provided. Here, Level 1 is considered the minimum requirement. " Level 2" provides increased performance. These levels confirm abrasion resistance, cut resistance & hardness of the underside.





...

Zinc toe slider for Falco boots. Suitable for Falco Fenix WTR Falco Fenix WTR 3 ...

Removable Falco gearshift protector in women s size, to protect shoes when shifting gears. ...

Removable Falco gearshift protector in women s size, to protect shoes when shifting gears. ...

The Gordon 2 is a simple & elegant heritage boot with integrated protectors. The upper is made from oiled cowhide leather. Features Upper made from full-grain, oil-treated leather High-Tex® membrane Reinforced toe & heel protection D3O® ankle protector incorporated Certified according to EN13634:2017 Laces & zipper combined closure Pre-shaped, vibration-absorbing, orthopedic footbed Welted durable " Goodyear" sole D3O™ Impact Protection Developed in Winter-sports & Military industry is first applied to motorcycle boots by FALCO. D3O™ intelligent molecules™ flow freely when moving slowly but in case of shock lock together to absorb impact energy. Impact force transmitted to ankle-foot area is significantly reduced thanks to D3O™ exclusive support. High-Tex® Membrane Falco membrane resistant to water penetration. The only scientific test to determine, define & indicate whether a motorcycle boot is waterproof is the test required by the regulations EN 13634: 2010. The testing method consists of walk of 100 steps on a suitable platform with water level 5 mm above the sole. At the successful completion of this test the boot is considered waterproof. ACFmen Craft constructive system of the boot around the last reproducing men’s foot anatomy. This technique allows reaching a higher level of comfort, to extend utilization time & to match different riding conditions. Italian Quality Product Italian craftsmanship’s ability developed in over 20 years of motorcycle boots production combines with certified materials & most innovative constructive solutions. Highly skilled technicians follow industrialization processes of all different production units. Quality of Italian manufacturing is central to FALCO s success & loyal customer base. ...

The Gordon 2 is a simple & elegant heritage boot with integrated protectors. The upper is made from oiled cowhide leather. Features Upper made from full-grain, oil-treated leather High-Tex® membrane Reinforced toe & heel protection D3O® ankle protector incorporated Certified according to EN13634:2017 Laces & zipper combined closure Pre-shaped, vibration-absorbing, orthopedic footbed Welted durable " Goodyear" sole D3O™ Impact Protection Developed in Winter-sports & Military industry is first applied to motorcycle boots by FALCO. D3O™ intelligent molecules™ flow freely when moving slowly but in case of shock lock together to absorb impact energy. Impact force transmitted to ankle-foot area is significantly reduced thanks to D3O™ exclusive support. High-Tex® Membrane Falco membrane resistant to water penetration. The only scientific test to determine, define & indicate whether a motorcycle boot is waterproof is the test required by the regulations EN 13634: 2010. The testing method consists of walk of 100 steps on a suitable platform with water level 5 mm above the sole. At the successful completion of this test the boot is considered waterproof. ACFmen Craft constructive system of the boot around the last reproducing men’s foot anatomy. This technique allows reaching a higher level of comfort, to extend utilization time & to match different riding conditions. Italian Quality Product Italian craftsmanship’s ability developed in over 20 years of motorcycle boots production combines with certified materials & most innovative constructive solutions. Highly skilled technicians follow industrialization processes of all different production units. Quality of Italian manufacturing is central to FALCO s success & loyal customer base. ...

The Gordon 2 is a simple & elegant heritage boot with integrated protectors. The upper is made from oiled cowhide leather. Features Upper made from full-grain, oil-treated leather High-Tex® membrane Reinforced toe & heel protection D3O® ankle protector incorporated Certified according to EN13634:2017 Laces & zipper combined closure Pre-shaped, vibration-absorbing, orthopedic footbed Welted durable " Goodyear" sole D3O™ Impact Protection Developed in Winter-sports & Military industry is first applied to motorcycle boots by FALCO. D3O™ intelligent molecules™ flow freely when moving slowly but in case of shock lock together to absorb impact energy. Impact force transmitted to ankle-foot area is significantly reduced thanks to D3O™ exclusive support. High-Tex® Membrane Falco membrane resistant to water penetration. The only scientific test to determine, define & indicate whether a motorcycle boot is waterproof is the test required by the regulations EN 13634: 2010. The testing method consists of walk of 100 steps on a suitable platform with water level 5 mm above the sole. At the successful completion of this test the boot is considered waterproof. ACFmen Craft constructive system of the boot around the last reproducing men’s foot anatomy. This technique allows reaching a higher level of comfort, to extend utilization time & to match different riding conditions. Italian Quality Product Italian craftsmanship’s ability developed in over 20 years of motorcycle boots production combines with certified materials & most innovative constructive solutions. Highly skilled technicians follow industrialization processes of all different production units. Quality of Italian manufacturing is central to FALCO s success & loyal customer base. ...

The Gordon 2 is a simple & elegant heritage boot with integrated protectors. The upper is made from oiled cowhide leather. Features Upper made from full-grain, oil-treated leather High-Tex® membrane Reinforced toe & heel protection D3O® ankle protector incorporated Certified according to EN13634:2017 Laces & zipper combined closure Pre-shaped, vibration-absorbing, orthopedic footbed Welted durable " Goodyear" sole D3O™ Impact Protection Developed in Winter-sports & Military industry is first applied to motorcycle boots by FALCO. D3O™ intelligent molecules™ flow freely when moving slowly but in case of shock lock together to absorb impact energy. Impact force transmitted to ankle-foot area is significantly reduced thanks to D3O™ exclusive support. High-Tex® Membrane Falco membrane resistant to water penetration. The only scientific test to determine, define & indicate whether a motorcycle boot is waterproof is the test required by the regulations EN 13634: 2010. The testing method consists of walk of 100 steps on a suitable platform with water level 5 mm above the sole. At the successful completion of this test the boot is considered waterproof. ACFmen Craft constructive system of the boot around the last reproducing men’s foot anatomy. This technique allows reaching a higher level of comfort, to extend utilization time & to match different riding conditions. Italian Quality Product Italian craftsmanship’s ability developed in over 20 years of motorcycle boots production combines with certified materials & most innovative constructive solutions. Highly skilled technicians follow industrialization processes of all different production units. Quality of Italian manufacturing is central to FALCO s success & loyal customer base. ...

The Gordon 2 is a simple & elegant heritage boot with integrated protectors. The upper is made from oiled cowhide leather. Features Upper made from full-grain, oil-treated leather High-Tex® membrane Reinforced toe & heel protection D3O® ankle protector incorporated Certified according to EN13634:2017 Laces & zipper combined closure Pre-shaped, vibration-absorbing, orthopedic footbed Welted durable " Goodyear" sole D3O™ Impact Protection Developed in Winter-sports & Military industry is first applied to motorcycle boots by FALCO. D3O™ intelligent molecules™ flow freely when moving slowly but in case of shock lock together to absorb impact energy. Impact force transmitted to ankle-foot area is significantly reduced thanks to D3O™ exclusive support. High-Tex® Membrane Falco membrane resistant to water penetration. The only scientific test to determine, define & indicate whether a motorcycle boot is waterproof is the test required by the regulations EN 13634: 2010. The testing method consists of walk of 100 steps on a suitable platform with water level 5 mm above the sole. At the successful completion of this test the boot is considered waterproof. ACFmen Craft constructive system of the boot around the last reproducing men’s foot anatomy. This technique allows reaching a higher level of comfort, to extend utilization time & to match different riding conditions. Italian Quality Product Italian craftsmanship’s ability developed in over 20 years of motorcycle boots production combines with certified materials & most innovative constructive solutions. Highly skilled technicians follow industrialization processes of all different production units. Quality of Italian manufacturing is central to FALCO s success & loyal customer base. ...