Intuitive Cube X-Guard Infinity + mount to attach X-Guard accessories to nearly anything. Features Compatible with X-Guard case & Accessories Two options available: Flat & curved surface Push the safety lock before remove Reinforced adhesion holds up to 1kg Attach to the surface, then press firmly & wait 24 hours before use One-time only for sticker, remove the device after heat up the sticker

Dimensions Size：54 x 52 x 22 mm Weight：24.8 gr. Operation instruction / Cautions Clean the surface to adhere the Mount & the Adapter with alcohol or cleaning wipe fully & let it dry, remove the release papers, stick the Mount on the fixed part & the Adapter in the center of the device. Press firmly for 30 seconds with up to 1kg & wait 24 hrs to dry before use. Intuitive Cube company does not take the responsibility to any loss due to any improper cleaning or improper operation. This product can only use on flat surface, do not use on the curve surface & cause the adhesive stickers fall off. This product is suitable for cellphone case of material PC, ABS, our company does not take the responsibility to the loss for using improper material cellphone case. Reinforced adhesion holds up to 1kg for static state using, Reinforced adhesion holds up to 200 gr. for moving state using only applicable 4.7”
- 6” cellphone. (Compatible with handle bar, mirror amount & sport armband). This product using 3MTM VIIBTM strip, it could be left the residual glue & damage the surface, please use it before consideration. Our company does not take the responsibility to any loss due to residual glue & surface damage. This product using 3MTM VIIBTM strip, we suggest not to use on particular material cellphone case as below: TPR, PP, PE, silicone, jelly, TPU, leather, aluminum alloy, glass…etc. If the consumer has any inquiry, please consult with 3M company for professional support, Intuitive Cube company does not take the responsibility to the risk for using VHB strip.


...

Intuitive Cube X-Guard Infinity + mount to attach X-Guard accessories to nearly anything. Features Compatible with X-Guard case & Accessories Two options available: Flat & curved surface Push the safety lock before remove Reinforced adhesion holds up to 1kg Attach to the surface, then press firmly & wait 24 hours before use One-time only for sticker, remove the device after heat up the sticker

Dimensions Size：54 x 52 x 22 mm Weight：24.8 gr. Operation instruction / Cautions Clean the surface to adhere the Mount & the Adapter with alcohol or cleaning wipe fully & let it dry, remove the release papers, stick the Mount on the fixed part & the Adapter in the center of the device. Press firmly for 30 seconds with up to 1kg & wait 24 hrs to dry before use. Intuitive Cube company does not take the responsibility to any loss due to any improper cleaning or improper operation. This product can only use on flat surface, do not use on the curve surface & cause the adhesive stickers fall off. This product is suitable for cellphone case of material PC, ABS, our company does not take the responsibility to the loss for using improper material cellphone case. Reinforced adhesion holds up to 1kg for static state using, Reinforced adhesion holds up to 200 gr. for moving state using only applicable 4.7”
- 6” cellphone. (Compatible with handle bar, mirror amount & sport armband). This product using 3MTM VIIBTM strip, it could be left the residual glue & damage the surface, please use it before consideration. Our company does not take the responsibility to any loss due to residual glue & surface damage. This product using 3MTM VIIBTM strip, we suggest not to use on particular material cellphone case as below: TPR, PP, PE, silicone, jelly, TPU, leather, aluminum alloy, glass…etc. If the consumer has any inquiry, please consult with 3M company for professional support, Intuitive Cube company does not take the responsibility to the risk for using VHB strip.


...

Intuitive Cube X-Guard Infinity adapter to attach nearly anything to X-Guard mounts. Features Compatible with all X-Guard Mounts Reinforced adhesion holds up to 1kg for static state using Reinforced adhesion holds up to 200g for moving state using Only applicable 4.7”
- 6” cellphone. (Compatible with handle bar, mirror amount & sport armband) Free to incorporate with flat-surfaced device Infinitive usage for lock/unlock-n-go in life Package Set 1: 1x mount, 1x adapter Set 2: 2x adapter Set 3: 2x mount Notice Super strong adhesive tape is disposable. Cautiously choose the hard & strong surface to stick. May not adhere well or damage on soft & non-strong surface. To remove, please use suitable adhesive remover. Install condition 1kg pressure for 30 seconds at average 25° C Wait 24 hrs to use

Dimensions Size mount (male)：35 x 35 x 8 mm Size adapter (female)：35 x 35 x 4 mm Weight：8.2 gr. Operation instruction / Cautions Clean the surface to adhere the Mount & the Adapter with alcohol or cleaning wipe fully & let it dry, remove the release papers, stick the Mount on the fixed part & the Adapter in the center of the device. Press firmly for 30 seconds with up to 1kg & wait 24 hrs to dry before use. Intuitive Cube company does not take the responsibility to any loss due to any improper cleaning or improper operation. This product can only use on flat surface, do not use on the curve surface & cause the adhesive stickers fall off. This product is suitable for cellphone case of material PC, ABS, our company does not take the responsibility to the loss for using improper material cellphone case. Reinforced adhesion holds up to 1kg for static state using, Reinforced adhesion holds up to 200 gr. for moving state using only applicable 4.7”
- 6” cellphone. (Compatible with handle bar, mirror amount & sport armband). This product using 3MTM VIIBTM strip, it could be left the residual glue & damage the surface, please use it before consideration. Our company does not take the responsibility to any loss due to residual glue & surface damage. This product using 3MTM VIIBTM strip, we suggest not to use on particular material cellphone case as below: TPR, PP, PE, silicone, jelly, TPU, leather, aluminum alloy, glass…etc. If the consumer has any inquiry, please consult with 3M company for professional support, Intuitive Cube company does not take the responsibility to the risk for using VHB strip.



...

Intuitive Cube X-Guard Infinity adapter to attach nearly anything to X-Guard mounts. Features Compatible with all X-Guard Mounts Reinforced adhesion holds up to 1kg for static state using Reinforced adhesion holds up to 200g for moving state using Only applicable 4.7”
- 6” cellphone. (Compatible with handle bar, mirror amount & sport armband) Free to incorporate with flat-surfaced device Infinitive usage for lock/unlock-n-go in life Package Set 1: 1x mount, 1x adapter Set 2: 2x adapter Set 3: 2x mount Notice Super strong adhesive tape is disposable. Cautiously choose the hard & strong surface to stick. May not adhere well or damage on soft & non-strong surface. To remove, please use suitable adhesive remover. Install condition 1kg pressure for 30 seconds at average 25° C Wait 24 hrs to use

Dimensions Size mount (male)：35 x 35 x 8 mm Size adapter (female)：35 x 35 x 4 mm Weight：8.2 gr. Operation instruction / Cautions Clean the surface to adhere the Mount & the Adapter with alcohol or cleaning wipe fully & let it dry, remove the release papers, stick the Mount on the fixed part & the Adapter in the center of the device. Press firmly for 30 seconds with up to 1kg & wait 24 hrs to dry before use. Intuitive Cube company does not take the responsibility to any loss due to any improper cleaning or improper operation. This product can only use on flat surface, do not use on the curve surface & cause the adhesive stickers fall off. This product is suitable for cellphone case of material PC, ABS, our company does not take the responsibility to the loss for using improper material cellphone case. Reinforced adhesion holds up to 1kg for static state using, Reinforced adhesion holds up to 200 gr. for moving state using only applicable 4.7”
- 6” cellphone. (Compatible with handle bar, mirror amount & sport armband). This product using 3MTM VIIBTM strip, it could be left the residual glue & damage the surface, please use it before consideration. Our company does not take the responsibility to any loss due to residual glue & surface damage. This product using 3MTM VIIBTM strip, we suggest not to use on particular material cellphone case as below: TPR, PP, PE, silicone, jelly, TPU, leather, aluminum alloy, glass…etc. If the consumer has any inquiry, please consult with 3M company for professional support, Intuitive Cube company does not take the responsibility to the risk for using VHB strip.



...

Intuitive Cube X-Guard Infinity adapter to attach nearly anything to X-Guard mounts. Features Compatible with all X-Guard Mounts Reinforced adhesion holds up to 1kg for static state using Reinforced adhesion holds up to 200g for moving state using Only applicable 4.7”
- 6” cellphone. (Compatible with handle bar, mirror amount & sport armband) Free to incorporate with flat-surfaced device Infinitive usage for lock/unlock-n-go in life Package Set 1: 1x mount, 1x adapter Set 2: 2x adapter Set 3: 2x mount Notice Super strong adhesive tape is disposable. Cautiously choose the hard & strong surface to stick. May not adhere well or damage on soft & non-strong surface. To remove, please use suitable adhesive remover. Install condition 1kg pressure for 30 seconds at average 25° C Wait 24 hrs to use

Dimensions Size mount (male)：35 x 35 x 8 mm Size adapter (female)：35 x 35 x 4 mm Weight：8.2 gr. Operation instruction / Cautions Clean the surface to adhere the Mount & the Adapter with alcohol or cleaning wipe fully & let it dry, remove the release papers, stick the Mount on the fixed part & the Adapter in the center of the device. Press firmly for 30 seconds with up to 1kg & wait 24 hrs to dry before use. Intuitive Cube company does not take the responsibility to any loss due to any improper cleaning or improper operation. This product can only use on flat surface, do not use on the curve surface & cause the adhesive stickers fall off. This product is suitable for cellphone case of material PC, ABS, our company does not take the responsibility to the loss for using improper material cellphone case. Reinforced adhesion holds up to 1kg for static state using, Reinforced adhesion holds up to 200 gr. for moving state using only applicable 4.7”
- 6” cellphone. (Compatible with handle bar, mirror amount & sport armband). This product using 3MTM VIIBTM strip, it could be left the residual glue & damage the surface, please use it before consideration. Our company does not take the responsibility to any loss due to residual glue & surface damage. This product using 3MTM VIIBTM strip, we suggest not to use on particular material cellphone case as below: TPR, PP, PE, silicone, jelly, TPU, leather, aluminum alloy, glass…etc. If the consumer has any inquiry, please consult with 3M company for professional support, Intuitive Cube company does not take the responsibility to the risk for using VHB strip.



...

Hardcover to protect your smartphone & connect it to the Intuitive Cube X-Guard accessories. Features Compatible with all X-Guard accessories Hassle-free mounting designs, connect / disconnect X-Guard Accessories instantly The balanced duo-combination of PC & TPU materials provide great protection to your phone Impact resistance is reinforced at all corners of the casing, offering enhanced protection Inner layer with honeycomb structure anti-shock design Compatibility iPhone 11 Pro Max

Dimensions Size：162 x 83 x 12 mm Weight：37 gr.

...

Hardcover to protect your smartphone & connect it to the Intuitive Cube X-Guard accessories. Features Compatible with all X-Guard accessories Hassle-free mounting designs, connect / disconnect X-Guard Accessories instantly The balanced duo-combination of PC & TPU materials provide great protection to your phone Impact resistance is reinforced at all corners of the casing, offering enhanced protection Inner layer with honeycomb structure anti-shock design Compatibility iPhone 11 Pro

Dimensions Size：148 x 75 x 12 mm Weight：32 gr.

...

Hardcover to protect your smartphone & connect it to the Intuitive Cube X-Guard accessories. Features Compatible with all X-Guard accessories Hassle-free mounting designs, connect / disconnect X-Guard Accessories instantly The balanced duo-combination of PC & TPU materials provide great protection to your phone Impact resistance is reinforced at all corners of the casing, offering enhanced protection Inner layer with honeycomb structure anti-shock design Compatibility iPhone 11 Pro

Dimensions Size：148 x 75 x 12 mm Weight：32 gr.

...

Hardcover to protect your smartphone & connect it to the Intuitive Cube X-Guard accessories. Features Compatible with all X-Guard accessories Hassle-free mounting designs, connect / disconnect X-Guard Accessories instantly The balanced duo-combination of PC & TPU materials provide great protection to your phone Impact resistance is reinforced at all corners of the casing, offering enhanced protection Inner layer with honeycomb structure anti-shock design Compatibility iPhone 11 / XR

Dimensions Size：154 x 81 x 12 mm Weight：35 gr.

...

Hardcover to protect your smartphone & connect it to the Intuitive Cube X-Guard accessories. Features Compatible with all X-Guard accessories Hassle-free mounting designs, connect / disconnect X-Guard Accessories instantly The balanced duo-combination of PC & TPU materials provide great protection to your phone Impact resistance is reinforced at all corners of the casing, offering enhanced protection Inner layer with honeycomb structure anti-shock design Compatibility iPhone 11 / XR

Dimensions Size：154 x 81 x 12 mm Weight：35 gr.

...