The lubrication of the drive chain is only conditionally one of the favorite activities of motorcyclists who own a vehicle with this drive. Here it is with the chain lubricator Nemo 2 from Cobrra no matter at all, because with it the chain is almost automatically oiled & maintained. The system is suitable for all types of chains. The system works on the compression principle. By manually generated pressure in the dispenser, oil is pressed through the supply hose to the pipette. From there, it drips onto the chain & is evenly distributed during travel. The Nemo 2 is usually attached to the handlebars & remains permanently on the vehicle. Turn the wheel on the dispenser 90° in the direction of the arrow & in about 3 minutes the chain is lubricated for up to 350 km. Features & functions Significant extension of the operating time of chain & sprockets High time saving for cleaning & lubrication compared to manual chain maintenance Fixed installation without interfering with t... ...

Replacement seals & connector for Cobra Nemo 2 chain oiler. ...

If your Nemo 2 won’t fit on your handlebars because of an obstruction you can fit the extension bracket which will move the unit by 15 mm giving you more clearance from obstructions. ...

Cobrra Nemo 2 replacement cap (w/o sealing). ...

Handlebar bracket, for mounting the Nemo 2 chain oiler when the system on your motorcycle can not be mounted horizontally on the clutch or brake lever bracket. Features For handlebar diameter 22 mm ...

Cobrra Nemo 2 replacement swing arm bracket pack for use on a second bike or to replace a damaged bracket. ...

The RIDER
- developed by COBRRA
- is the universal chain lubricator that saves money, time & effort in chain maintenance. The

...

Contour 360 Degrees
- Adhesive Pad Mount for the protective housings of the Contour action cameras The Contour 360° adhesive pad
...

Contour 360 Degrees
- Adhesive Pad Mount for the protective housings of the Contour action cameras The Contour 360° adhesive pad
...

Contour tube mount for the Contour action cameras The Contour tube mount allows the Contour action cameras to be attached to any tube with a diameter of 50 mm to 76 mm (e.g. roll bars). Co-developed by RAM® mounting systems, this mount is easily adjustable to almost any direction, thanks to the patented RAM® clamp arm. With the patented TRail system, the camera simply slides onto the mount on rails & locks into place. Scope of delivery Contour tube mount with RAM® mount clamp arm & TRail system The camera illustrated is not included. ...