The 1980s. Motorcycles without fairings. An attitude that made you feel different than everyone else. Introduction of the Concept-X. In keeping with the simple but aggressive style of the time, this helmet comes from the heart of Arai s R&D department. They loved the look, but that was about it. Now Arai engineers want an old school cool look that suits their style & their bikes. But they want coolness with modern Arai performance. The rugged simplicity of Concept-X is the product of imagination. But don t draw the wrong conclusions. The retro style may catch the eye, but it had to pass Arai s stringent internal tests. As a result, beneath the aggressive look is a strong, lightweight PB e-c Lc shell with a smooth, rounded shape, reinforced with Arai s proprietary peripheral belt to glide over surfaces & bounce off obstacles. The VAS-VC visor system, with its mechanical retro look, further enhances vision performance by lowering the visor pivot point to maximize a smooth top shell. The Concept-X s slim outer shell holds one secret: Arai s internal ventilation system. Cooling air is passed through the visor s eyebrow-level vents, through the comfort liner & three top vent holes, & then out through a hidden, multi-stage air channel inside the EPS liner by the negative pressure created by the combined venturi effect of the side vents & neck vent. At the front, six netted slots can be closed to prevent fogging & opened for air supply. General Shell construction: PB e-c Lc Variable Axis System (VAS) Ventilation Free Flow System (FFS) Concealed, multi-stage air duct Front ventilation Ventilation above the eyes Inner closure (latch) for chin ventilation Rear ventilation Neck ventilation flaps Lateral venting Aerodynamics Fixed chin spoiler Sight VAS Max Vision Visor New visor lock Pinlock washer Interior design Antimicrobial lining Exchangeable ear pads/cheek pads Interchangeable lining Speaker bags Facial Contour System (FCS) 5 mm removable ear pads/cheek pads 5 mm removable temple pads Comfort Emergency Release System (ERS) Approval ECE 22-05 Note Please be aware, as long as nothing else is written in the item description: All helmets will be delivered only with the ECE certification by default all helmets that have a visor will be delivered with a clear visor, even if it is shown differently. ...

The 1980s. Motorcycles without fairings. An attitude that made you feel different than everyone else. Introduction of the Concept-X. In keeping with the simple but aggressive style of the time, this helmet comes from the heart of Arai s R&D department. They loved the look, but that was about it. Now Arai engineers want an old school cool look that suits their style & their bikes. But they want coolness with modern Arai performance. The rugged simplicity of Concept-X is the product of imagination. But don t draw the wrong conclusions. The retro style may catch the eye, but it had to pass Arai s stringent internal tests. As a result, beneath the aggressive look is a strong, lightweight PB e-c Lc shell with a smooth, rounded shape, reinforced with Arai s proprietary peripheral belt to glide over surfaces & bounce off obstacles. The VAS-VC visor system, with its mechanical retro look, further enhances vision performance by lowering the visor pivot point to maximize a smooth top shell. The Concept-X s slim outer shell holds one secret: Arai s internal ventilation system. Cooling air is passed through the visor s eyebrow-level vents, through the comfort liner & three top vent holes, & then out through a hidden, multi-stage air channel inside the EPS liner by the negative pressure created by the combined venturi effect of the side vents & neck vent. At the front, six netted slots can be closed to prevent fogging & opened for air supply. General Shell construction: PB e-c Lc Variable Axis System (VAS) Ventilation Free Flow System (FFS) Concealed, multi-stage air duct Front ventilation Ventilation above the eyes Inner closure (latch) for chin ventilation Rear ventilation Neck ventilation flaps Lateral venting Aerodynamics Fixed chin spoiler Sight VAS Max Vision Visor New visor lock Pinlock washer Interior design Antimicrobial lining Exchangeable ear pads/cheek pads Interchangeable lining Speaker bags Facial Contour System (FCS) 5 mm removable ear pads/cheek pads 5 mm removable temple pads Comfort Emergency Release System (ERS) Approval ECE 22-05 Note Please be aware, as long as nothing else is written in the item description: All helmets will be delivered only with the ECE certification by default, even if it is shown differently. all helmets that have a visor will be delivered with a clear visor, even if it is shown differently. ...

The 1980s. Motorcycles without fairings. An attitude that made you feel different than everyone else. Introduction of the Concept-X. In keeping with the simple but aggressive style of the time, this helmet comes from the heart of Arai s R&D department. They loved the look, but that was about it. Now Arai engineers want an old school cool look that suits their style & their bikes. But they want coolness with modern Arai performance. The rugged simplicity of Concept-X is the product of imagination. But don t draw the wrong conclusions. The retro style may catch the eye, but it had to pass Arai s stringent internal tests. As a result, beneath the aggressive look is a strong, lightweight PB e-c Lc shell with a smooth, rounded shape, reinforced with Arai s proprietary peripheral belt to glide over surfaces & bounce off obstacles. The VAS-VC visor system, with its mechanical retro look, further enhances vision performance by lowering the visor pivot point to maximize a smooth top shell. The Concept-X s slim outer shell holds one secret: Arai s internal ventilation system. Cooling air is passed through the visor s eyebrow-level vents, through the comfort liner & three top vent holes, & then out through a hidden, multi-stage air channel inside the EPS liner by the negative pressure created by the combined venturi effect of the side vents & neck vent. At the front, six netted slots can be closed to prevent fogging & opened for air supply. General Shell construction: PB e-c Lc Variable Axis System (VAS) Ventilation Free Flow System (FFS) Concealed, multi-stage air duct Front ventilation Ventilation above the eyes Inner closure (latch) for chin ventilation Rear ventilation Neck ventilation flaps Lateral venting Aerodynamics Fixed chin spoiler Sight VAS Max Vision Visor New visor lock Pinlock washer Interior design Antimicrobial lining Exchangeable ear pads/cheek pads Interchangeable lining Speaker bags Facial Contour System (FCS) 5 mm removable ear pads/cheek pads 5 mm removable temple pads Comfort Emergency Release System (ERS) Approval ECE 22-05 Note Please be aware, as long as nothing else is written in the item description: All helmets will be delivered only with the ECE certification by default, even if it is shown differently. all helmets that have a visor will be delivered with a clear visor, even if it is shown differently. ...

Cutting-edge technology with a vintage look! A tribute to the classic style of the 1980s, the Concept-X is equipped with the latest technologies in protection & comfort. A simple & sophisticated shape that is not categorized by any genre. In addition to the internal ventilation system of Arai, the helmet has the complete system interior, which also has almost the same materials as the racing helmets. A " Neo Classic" helmet that is not only suitable for classic motorcycles & cruisers but also fits the latest motorcycles. Features PB-e c Lc outer shell made from the original Arai super fiber & a newly developed resin New Arai system: three exhaust vents are placed at the top, so that air flows through the air duct in the liner & is efficiently exhausted by negative pressure through the slot at the back of the head while riding. The highly efficient ventilation is realized while maintaining a simple & clean surface. VAS System: compact visor with variable axis system, better protection in the temple areas without compromising the field of vision. FCS face contour system: perfect fit for any type of face Antibacterial, stain-resistant & deodorizing Ecopure interior. Fully removable &

Washable.

" Peel-off" five millimeter thick, removable foam layer that provides more room if desired without having to purchase an optional part Handmade The Concept-X has far exceeded all standard tests: Arai s main goal is to make the safest helmets in the world Can be used with PSS (Pro Shade System) visor: the all-weather solution against fogging, haze & sun glare (sold separately) Approved according to ECE 22-06 Shell construction: PB e-c Lc (Peripherally Belted e-Complex Laminate Construction). The Concept-X s outer shell features e-complex laminate construction (PB e-c Lc), further reinforced by the "peripheral belt" in the front of the head, which in turn increases strength to better dissipate impact forces & distribute energy. New materials have been used to replace the AR mat as the middle layer, resulting in a significant weight reduction. However, the strength remains the same as the PB-c Lc construction. Variable Axis System (VAS) With VAS, the visor attachment has been moved downward, resulting in an average of an advantageous 24 mm of space on both temple sides, bringing the helmet even closer to the ideal shape with even better glide. Thus, several areas of the shell can become harder, according to the test ranges of the Snell standard or even beyond. Concept-XE Ventilation The Concept-XE s sleek outer shell hides a secret: Arai s internal ventilation system. Cooling air passes through the visor s eyebrow-level vents, through the comfort liner & three top vents, & out through a hidden, multi-stage air duct inside the EPS liner via the negative pressure created by the combined venturi effect of the side vents & the neck vent. At the front, six mesh-covered slots can be closed to prevent fogging & opened for airflow. Free Flow System (FFS) Creates an airflow under the helmet that specifically reduces wind noise & air turbulence while promoting the expulsion of warm, stale air out of the helmet. Concealed multi-stage air duct Warm air can be directed through three openings in the EPS inner shell to the dual Venturi vacuum exhaust vents. Ventilation above the eyes Fresh air can be directed to the user s forehead/sleep area without the need to drill additional holes in the shell of the helmet. Internal closure (latch) for chin ventilation. To prevent the ingress of coarse dirt, the chin vents are in addition adjustable from the inside at the side. Neck vent flaps To direct warm & stale air out of the helmet in a targeted manner. At the same time, this creates an increased air flow in the lower helmet area. Side vents Additional side air vents in the lower helmet area guide warm & stale air out of the helmet. Integrated into the shell construction, these outlets are designed to be aerodynamically optimal. A layer of Special Foam cleverly placed inside reduces wind noise without compromising ventilation performance. Fixed chin spoiler Reduces wind noise & helps remove hot air from the face area. Road debris is better deflected from the neck. Depending on the model, various Arai helmets have a pull-out wind deflector in the chin area. VAS Max Vision Visor The VAS MAX Vision visor provides better vision in all weather & driving conditions as standard. Visor lock Adapted from Arai s F1 helmets, the completely modified 3D visor lock that reliably ensures that the visor does not open by itself. The operation to open the visor without resistance is intuitive- with one finger- even with gloves. Pinlock lens Effectively prevents fogging of the visor. Clear vision, even in adverse weather conditions. Easy to remove for changing or cleaning. Antimicrobial lining This skin-friendly, antibacterial material is very pleasant to our skin. With the aim of developing a softer & even more comfortable inner padding, the material used to hold the padding has also been enhanced & made softer. The pad has a changeable insert that allows for personalization Interchangeable ear pads/cheek pads Cheek pads/cheek ear pads (Jet helmets) can be removed very easily. All parts, replaceable or not, can be cleaned well with lukewarm water & very mild soap. Rinse well with clean water afterwards & do not let things dry in direct sunlight or near a heat source. All interior parts come in different sizes & thicknesses to allow for a custom fit for each driver. Remove by taking out the back first Insert by putting the front side in first Interior: Replaceable inner lining All the inner padding can be removed very easily. All parts, replaceable or not, can be cleaned well with lukewarm water & very mild soap. Afterwards, rinse well with clean water & do not let them dry in direct sunlight or near a heat source. All interior parts are available in different sizes & thicknesses to provide an individual fit for each driver. Speaker Pockets Built-in communication systems are popular, but the problem is often that space for speakers is limited or non-existent, resulting in unwanted pressure points. The special speaker pockets that allow speakers to be mounted without skimping on comfort or fit. (Speakers not included). Facial Contour System (FCS) The Facial Contour System (FCS) works with a spring mechanism in the cheek pads, providing a tight fit & more comfort on the lower jaw without applying too much pressure. 5 mm removable ear pads/cheek pads. The cheek pads provide even easier fit & comfort, & have a 5mm peel-off layer to free up space when needed. Emergency Release System (ERS) Allows faster access to an injured rider. Pulling the orange tabs integrated into the pads causes the cheek pads to fall out. This makes it easier for rescue workers to remove the helmet. This reduces the risk of further injury. Air supply control Work in conjunction with the "dual-pivot®" chin vent. Fresh air is directed directly onto the surface of the visor & at the same time stale air is directed away from it downwards. Note Please be aware, as long as nothing else is written in the item description: All helmets will be delivered only with the ECE certification by default, even if it is shown differently. all helmets that have a visor will be delivered with a clear visor, even if it is shown differently.



...

Cutting-edge technology with a vintage look! A tribute to the classic style of the 1980s, the Concept-X is equipped with the latest technologies in protection & comfort. A simple & sophisticated shape that is not categorized by any genre. In addition to the internal ventilation system of Arai, the helmet has the complete system interior, which also has almost the same materials as the racing helmets. A " Neo Classic" helmet that is not only suitable for classic motorcycles & cruisers but also fits the latest motorcycles. Features PB-e c Lc outer shell made from the original Arai super fiber & a newly developed resin New Arai system: three exhaust vents are placed at the top, so that air flows through the air duct in the liner & is efficiently exhausted by negative pressure through the slot at the back of the head while riding. The highly efficient ventilation is realized while maintaining a simple & clean surface. VAS System: compact visor with variable axis system, better pr... ...

Cutting-edge technology with a vintage look! A tribute to the classic style of the 1980s, the Concept-X is equipped with the latest technologies in protection & comfort. A simple & sophisticated shape that is not categorized by any genre. In addition to the internal ventilation system of Arai, the helmet has the complete system interior, which also has almost the same materials as the racing helmets. A " Neo Classic" helmet that is not only suitable for classic motorcycles & cruisers but also fits the latest motorcycles. Features PB-e c Lc outer shell made from the original Arai super fiber & a newly developed resin New Arai system: three exhaust vents are placed at the top, so that air flows through the air duct in the liner & is efficiently exhausted by negative pressure through the slot at the back of the head while riding. The highly efficient ventilation is realized while maintaining a simple & clean surface. VAS System: compact visor with variable axis system, better protection in the temple areas without compromising the field of vision. FCS face contour system: perfect fit for any type of face Antibacterial, stain-resistant & deodorizing Ecopure interior. Fully removable &

Washable.

" Peel-off" five millimeter thick, removable foam layer that provides more room if desired without having to purchase an optional part Handmade The Concept-X has far exceeded all standard tests: Arai s main goal is to make the safest helmets in the world Can be used with PSS (Pro Shade System) visor: the all-weather solution against fogging, haze & sun glare (sold separately) Approved according to ECE 22-06 Shell construction: PB e-c Lc (Peripherally Belted e-Complex Laminate Construction). The Concept-X s outer shell features e-complex laminate construction (PB e-c Lc), further reinforced by the "peripheral belt" in the front of the head, which in turn increases strength to better dissipate impact forces & distribute energy. New materials have been used to replace the AR mat as the middle layer, resulting in a significant weight reduction. However, the strength remains the same as the PB-c Lc construction. Variable Axis System (VAS) With VAS, the visor attachment has been moved downward, resulting in an average of an advantageous 24 mm of space on both temple sides, bringing the helmet even closer to the ideal shape with even better glide. Thus, several areas of the shell can become harder, according to the test ranges of the Snell standard or even beyond. Concept-XE Ventilation The Concept-XE s sleek outer shell hides a secret: Arai s internal ventilation system. Cooling air passes through the visor s eyebrow-level vents, through the comfort liner & three top vents, & out through a hidden, multi-stage air duct inside the EPS liner via the negative pressure created by the combined venturi effect of the side vents & the neck vent. At the front, six mesh-covered slots can be closed to prevent fogging & opened for airflow. Free Flow System (FFS) Creates an airflow under the helmet that specifically reduces wind noise & air turbulence while promoting the expulsion of warm, stale air out of the helmet. Concealed multi-stage air duct Warm air can be directed through three openings in the EPS inner shell to the dual Venturi vacuum exhaust vents. Ventilation above the eyes Fresh air can be directed to the user s forehead/sleep area without the need to drill additional holes in the shell of the helmet. Internal closure (latch) for chin ventilation. To prevent the ingress of coarse dirt, the chin vents are in addition adjustable from the inside at the side. Neck vent flaps To direct warm & stale air out of the helmet in a targeted manner. At the same time, this creates an increased air flow in the lower helmet area. Side vents Additional side air vents in the lower helmet area guide warm & stale air out of the helmet. Integrated into the shell construction, these outlets are designed to be aerodynamically optimal. A layer of Special Foam cleverly placed inside reduces wind noise without compromising ventilation performance. Fixed chin spoiler Reduces wind noise & helps remove hot air from the face area. Road debris is better deflected from the neck. Depending on the model, various Arai helmets have a pull-out wind deflector in the chin area. VAS Max Vision Visor The VAS MAX Vision visor provides better vision in all weather & driving conditions as standard. Visor lock Adapted from Arai s F1 helmets, the completely modified 3D visor lock that reliably ensures that the visor does not open by itself. The operation to open the visor without resistance is intuitive- with one finger- even with gloves. Pinlock lens Effectively prevents fogging of the visor. Clear vision, even in adverse weather conditions. Easy to remove for changing or cleaning. Antimicrobial lining This skin-friendly, antibacterial material is very pleasant to our skin. With the aim of developing a softer & even more comfortable inner padding, the material used to hold the padding has also been enhanced & made softer. The pad has a changeable insert that allows for personalization Interchangeable ear pads/cheek pads Cheek pads/cheek ear pads (Jet helmets) can be removed very easily. All parts, replaceable or not, can be cleaned well with lukewarm water & very mild soap. Rinse well with clean water afterwards & do not let things dry in direct sunlight or near a heat source. All interior parts come in different sizes & thicknesses to allow for a custom fit for each driver. Remove by taking out the back first Insert by putting the front side in first Interior: Replaceable inner lining All the inner padding can be removed very easily. All parts, replaceable or not, can be cleaned well with lukewarm water & very mild soap. Afterwards, rinse well with clean water & do not let them dry in direct sunlight or near a heat source. All interior parts are available in different sizes & thicknesses to provide an individual fit for each driver. Speaker Pockets Built-in communication systems are popular, but the problem is often that space for speakers is limited or non-existent, resulting in unwanted pressure points. The special speaker pockets that allow speakers to be mounted without skimping on comfort or fit. (Speakers not included). Facial Contour System (FCS) The Facial Contour System (FCS) works with a spring mechanism in the cheek pads, providing a tight fit & more comfort on the lower jaw without applying too much pressure. 5 mm removable ear pads/cheek pads. The cheek pads provide even easier fit & comfort, & have a 5mm peel-off layer to free up space when needed. Emergency Release System (ERS) Allows faster access to an injured rider. Pulling the orange tabs integrated into the pads causes the cheek pads to fall out. This makes it easier for rescue workers to remove the helmet. This reduces the risk of further injury. Air supply control Work in conjunction with the "dual-pivot®" chin vent. Fresh air is directed directly onto the surface of the visor & at the same time stale air is directed away from it downwards. Note Please be aware, as long as nothing else is written in the item description: All helmets will be delivered only with the ECE certification by default, even if it is shown differently. all helmets that have a visor will be delivered with a clear visor, even if it is shown differently.



...

Cutting-edge technology with a vintage look! A tribute to the classic style of the 1980s, the Concept-X is equipped with the latest technologies in protection & comfort. A simple & sophisticated shape that is not categorized by any genre. In addition to the internal ventilation system of Arai, the helmet has the complete system interior, which also has almost the same materials as the racing helmets. A " Neo Classic" helmet that is not only suitable for classic motorcycles & cruisers but also fits the latest motorcycles. Features PB-e c Lc outer shell made from the original Arai super fiber & a newly developed resin New Arai system: three exhaust vents are placed at the top, so that air flows through the air duct in the liner & is efficiently exhausted by negative pressure through the slot at the back of the head while riding. The highly efficient ventilation is realized while maintaining a simple & clean surface. VAS System: compact visor with variable axis system, better protection in the temple areas without compromising the field of vision. FCS face contour system: perfect fit for any type of face Antibacterial, stain-resistant & deodorizing Ecopure interior. Fully removable &

Washable.

" Peel-off" five millimeter thick, removable foam layer that provides more room if desired without having to purchase an optional part Handmade The Concept-X has far exceeded all standard tests: Arai s main goal is to make the safest helmets in the world Can be used with PSS (Pro Shade System) visor: the all-weather solution against fogging, haze & sun glare (sold separately) Approved according to ECE 22-06 Shell construction: PB e-c Lc (Peripherally Belted e-Complex Laminate Construction). The Concept-X s outer shell features e-complex laminate construction (PB e-c Lc), further reinforced by the "peripheral belt" in the front of the head, which in turn increases strength to better dissipate impact forces & distribute energy. New materials have been used to replace the AR mat as the middle layer, resulting in a significant weight reduction. However, the strength remains the same as the PB-c Lc construction. Variable Axis System (VAS) With VAS, the visor attachment has been moved downward, resulting in an average of an advantageous 24 mm of space on both temple sides, bringing the helmet even closer to the ideal shape with even better glide. Thus, several areas of the shell can become harder, according to the test ranges of the Snell standard or even beyond. Concept-XE Ventilation The Concept-XE s sleek outer shell hides a secret: Arai s internal ventilation system. Cooling air passes through the visor s eyebrow-level vents, through the comfort liner & three top vents, & out through a hidden, multi-stage air duct inside the EPS liner via the negative pressure created by the combined venturi effect of the side vents & the neck vent. At the front, six mesh-covered slots can be closed to prevent fogging & opened for airflow. Free Flow System (FFS) Creates an airflow under the helmet that specifically reduces wind noise & air turbulence while promoting the expulsion of warm, stale air out of the helmet. Concealed multi-stage air duct Warm air can be directed through three openings in the EPS inner shell to the dual Venturi vacuum exhaust vents. Ventilation above the eyes Fresh air can be directed to the user s forehead/sleep area without the need to drill additional holes in the shell of the helmet. Internal closure (latch) for chin ventilation. To prevent the ingress of coarse dirt, the chin vents are in addition adjustable from the inside at the side. Neck vent flaps To direct warm & stale air out of the helmet in a targeted manner. At the same time, this creates an increased air flow in the lower helmet area. Side vents Additional side air vents in the lower helmet area guide warm & stale air out of the helmet. Integrated into the shell construction, these outlets are designed to be aerodynamically optimal. A layer of Special Foam cleverly placed inside reduces wind noise without compromising ventilation performance. Fixed chin spoiler Reduces wind noise & helps remove hot air from the face area. Road debris is better deflected from the neck. Depending on the model, various Arai helmets have a pull-out wind deflector in the chin area. VAS Max Vision Visor The VAS MAX Vision visor provides better vision in all weather & driving conditions as standard. Visor lock Adapted from Arai s F1 helmets, the completely modified 3D visor lock that reliably ensures that the visor does not open by itself. The operation to open the visor without resistance is intuitive- with one finger- even with gloves. Pinlock lens Effectively prevents fogging of the visor. Clear vision, even in adverse weather conditions. Easy to remove for changing or cleaning. Antimicrobial lining This skin-friendly, antibacterial material is very pleasant to our skin. With the aim of developing a softer & even more comfortable inner padding, the material used to hold the padding has also been enhanced & made softer. The pad has a changeable insert that allows for personalization Interchangeable ear pads/cheek pads Cheek pads/cheek ear pads (Jet helmets) can be removed very easily. All parts, replaceable or not, can be cleaned well with lukewarm water & very mild soap. Rinse well with clean water afterwards & do not let things dry in direct sunlight or near a heat source. All interior parts come in different sizes & thicknesses to allow for a custom fit for each driver. Remove by taking out the back first Insert by putting the front side in first Interior: Replaceable inner lining All the inner padding can be removed very easily. All parts, replaceable or not, can be cleaned well with lukewarm water & very mild soap. Afterwards, rinse well with clean water & do not let them dry in direct sunlight or near a heat source. All interior parts are available in different sizes & thicknesses to provide an individual fit for each driver. Speaker Pockets Built-in communication systems are popular, but the problem is often that space for speakers is limited or non-existent, resulting in unwanted pressure points. The special speaker pockets that allow speakers to be mounted without skimping on comfort or fit. (Speakers not included). Facial Contour System (FCS) The Facial Contour System (FCS) works with a spring mechanism in the cheek pads, providing a tight fit & more comfort on the lower jaw without applying too much pressure. 5 mm removable ear pads/cheek pads. The cheek pads provide even easier fit & comfort, & have a 5mm peel-off layer to free up space when needed. Emergency Release System (ERS) Allows faster access to an injured rider. Pulling the orange tabs integrated into the pads causes the cheek pads to fall out. This makes it easier for rescue workers to remove the helmet. This reduces the risk of further injury. Air supply control Work in conjunction with the "dual-pivot®" chin vent. Fresh air is directed directly onto the surface of the visor & at the same time stale air is directed away from it downwards. Note Please be aware, as long as nothing else is written in the item description: All helmets will be delivered only with the ECE certification by default, even if it is shown differently. all helmets that have a visor will be delivered with a clear visor, even if it is shown differently.



...

Cutting-edge technology with a vintage look! A tribute to the classic style of the 1980s, the Concept-X is equipped with the latest technologies in protection & comfort. A simple & sophisticated shape that is not categorized by any genre. In addition to the internal ventilation system of Arai, the helmet has the complete system interior, which also has almost the same materials as the racing helmets. A " Neo Classic" helmet that is not only suitable for classic motorcycles & cruisers but also fits the latest motorcycles. Features PB-e c Lc outer shell made from the original Arai super fiber & a newly developed resin New Arai system: three exhaust vents are placed at the top, so that air flows through the air duct in the liner & is efficiently exhausted by negative pressure through the slot at the back of the head while riding. The highly efficient ventilation is realized while maintaining a simple & clean surface. VAS System: compact visor with variable axis system, better protection in the temple areas without compromising the field of vision. FCS face contour system: perfect fit for any type of face Antibacterial, stain-resistant & deodorizing Ecopure interior. Fully removable &

Washable.

" Peel-off" five millimeter thick, removable foam layer that provides more room if desired without having to purchase an optional part Handmade The Concept-X has far exceeded all standard tests: Arai s main goal is to make the safest helmets in the world Can be used with PSS (Pro Shade System) visor: the all-weather solution against fogging, haze & sun glare (sold separately) Approved according to ECE 22-06 Shell construction: PB e-c Lc (Peripherally Belted e-Complex Laminate Construction). The Concept-X s outer shell features e-complex laminate construction (PB e-c Lc), further reinforced by the "peripheral belt" in the front of the head, which in turn increases strength to better dissipate impact forces & distribute energy. New materials have been used to replace the AR mat as the middle layer, resulting in a significant weight reduction. However, the strength remains the same as the PB-c Lc construction. Variable Axis System (VAS) With VAS, the visor attachment has been moved downward, resulting in an average of an advantageous 24 mm of space on both temple sides, bringing the helmet even closer to the ideal shape with even better glide. Thus, several areas of the shell can become harder, according to the test ranges of the Snell standard or even beyond. Concept-XE Ventilation The Concept-XE s sleek outer shell hides a secret: Arai s internal ventilation system. Cooling air passes through the visor s eyebrow-level vents, through the comfort liner & three top vents, & out through a hidden, multi-stage air duct inside the EPS liner via the negative pressure created by the combined venturi effect of the side vents & the neck vent. At the front, six mesh-covered slots can be closed to prevent fogging & opened for airflow. Free Flow System (FFS) Creates an airflow under the helmet that specifically reduces wind noise & air turbulence while promoting the expulsion of warm, stale air out of the helmet. Concealed multi-stage air duct Warm air can be directed through three openings in the EPS inner shell to the dual Venturi vacuum exhaust vents. Ventilation above the eyes Fresh air can be directed to the user s forehead/sleep area without the need to drill additional holes in the shell of the helmet. Internal closure (latch) for chin ventilation. To prevent the ingress of coarse dirt, the chin vents are in addition adjustable from the inside at the side. Neck vent flaps To direct warm & stale air out of the helmet in a targeted manner. At the same time, this creates an increased air flow in the lower helmet area. Side vents Additional side air vents in the lower helmet area guide warm & stale air out of the helmet. Integrated into the shell construction, these outlets are designed to be aerodynamically optimal. A layer of Special Foam cleverly placed inside reduces wind noise without compromising ventilation performance. Fixed chin spoiler Reduces wind noise & helps remove hot air from the face area. Road debris is better deflected from the neck. Depending on the model, various Arai helmets have a pull-out wind deflector in the chin area. VAS Max Vision Visor The VAS MAX Vision visor provides better vision in all weather & driving conditions as standard. Visor lock Adapted from Arai s F1 helmets, the completely modified 3D visor lock that reliably ensures that the visor does not open by itself. The operation to open the visor without resistance is intuitive- with one finger- even with gloves. Pinlock lens Effectively prevents fogging of the visor. Clear vision, even in adverse weather conditions. Easy to remove for changing or cleaning. Antimicrobial lining This skin-friendly, antibacterial material is very pleasant to our skin. With the aim of developing a softer & even more comfortable inner padding, the material used to hold the padding has also been enhanced & made softer. The pad has a changeable insert that allows for personalization Interchangeable ear pads/cheek pads Cheek pads/cheek ear pads (Jet helmets) can be removed very easily. All parts, replaceable or not, can be cleaned well with lukewarm water & very mild soap. Rinse well with clean water afterwards & do not let things dry in direct sunlight or near a heat source. All interior parts come in different sizes & thicknesses to allow for a custom fit for each driver. Remove by taking out the back first Insert by putting the front side in first Interior: Replaceable inner lining All the inner padding can be removed very easily. All parts, replaceable or not, can be cleaned well with lukewarm water & very mild soap. Afterwards, rinse well with clean water & do not let them dry in direct sunlight or near a heat source. All interior parts are available in different sizes & thicknesses to provide an individual fit for each driver. Speaker Pockets Built-in communication systems are popular, but the problem is often that space for speakers is limited or non-existent, resulting in unwanted pressure points. The special speaker pockets that allow speakers to be mounted without skimping on comfort or fit. (Speakers not included). Facial Contour System (FCS) The Facial Contour System (FCS) works with a spring mechanism in the cheek pads, providing a tight fit & more comfort on the lower jaw without applying too much pressure. 5 mm removable ear pads/cheek pads. The cheek pads provide even easier fit & comfort, & have a 5mm peel-off layer to free up space when needed. Emergency Release System (ERS) Allows faster access to an injured rider. Pulling the orange tabs integrated into the pads causes the cheek pads to fall out. This makes it easier for rescue workers to remove the helmet. This reduces the risk of further injury. Air supply control Work in conjunction with the "dual-pivot®" chin vent. Fresh air is directed directly onto the surface of the visor & at the same time stale air is directed away from it downwards. Note Please be aware, as long as nothing else is written in the item description: All helmets will be delivered only with the ECE certification by default, even if it is shown differently. all helmets that have a visor will be delivered with a clear visor, even if it is shown differently.



...

Cutting-edge technology with a vintage look! A tribute to the classic style of the 1980s, the Concept-X is equipped with the latest technologies in protection & comfort. A simple & sophisticated shape that is not categorized by any genre. In addition to the internal ventilation system of Arai, the helmet has the complete system interior, which also has almost the same materials as the racing helmets. A " Neo Classic" helmet that is not only suitable for classic motorcycles & cruisers but also fits the latest motorcycles. Features PB-e c Lc outer shell made from the original Arai super fiber & a newly developed resin New Arai system: three exhaust vents are placed at the top, so that air flows through the air duct in the liner & is efficiently exhausted by negative pressure through the slot at the back of the head while riding. The highly efficient ventilation is realized while maintaining a simple & clean surface. VAS System: compact visor with variable axis system, better protection in the temple areas without compromising the field of vision. FCS face contour system: perfect fit for any type of face Antibacterial, stain-resistant & deodorizing Ecopure interior. Fully removable &

Washable.

" Peel-off" five millimeter thick, removable foam layer that provides more room if desired without having to purchase an optional part Handmade The Concept-X has far exceeded all standard tests: Arai s main goal is to make the safest helmets in the world Can be used with PSS (Pro Shade System) visor: the all-weather solution against fogging, haze & sun glare (sold separately) Approved according to ECE 22-06 Shell construction: PB e-c Lc (Peripherally Belted e-Complex Laminate Construction). The Concept-X s outer shell features e-complex laminate construction (PB e-c Lc), further reinforced by the "peripheral belt" in the front of the head, which in turn increases strength to better dissipate impact forces & distribute energy. New materials have been used to replace the AR mat as the middle layer, resulting in a significant weight reduction. However, the strength remains the same as the PB-c Lc construction. Variable Axis System (VAS) With VAS, the visor attachment has been moved downward, resulting in an average of an advantageous 24 mm of space on both temple sides, bringing the helmet even closer to the ideal shape with even better glide. Thus, several areas of the shell can become harder, according to the test ranges of the Snell standard or even beyond. Concept-XE Ventilation The Concept-XE s sleek outer shell hides a secret: Arai s internal ventilation system. Cooling air passes through the visor s eyebrow-level vents, through the comfort liner & three top vents, & out through a hidden, multi-stage air duct inside the EPS liner via the negative pressure created by the combined venturi effect of the side vents & the neck vent. At the front, six mesh-covered slots can be closed to prevent fogging & opened for airflow. Free Flow System (FFS) Creates an airflow under the helmet that specifically reduces wind noise & air turbulence while promoting the expulsion of warm, stale air out of the helmet. Concealed multi-stage air duct Warm air can be directed through three openings in the EPS inner shell to the dual Venturi vacuum exhaust vents. Ventilation above the eyes Fresh air can be directed to the user s forehead/sleep area without the need to drill additional holes in the shell of the helmet. Internal closure (latch) for chin ventilation. To prevent the ingress of coarse dirt, the chin vents are in addition adjustable from the inside at the side. Neck vent flaps To direct warm & stale air out of the helmet in a targeted manner. At the same time, this creates an increased air flow in the lower helmet area. Side vents Additional side air vents in the lower helmet area guide warm & stale air out of the helmet. Integrated into the shell construction, these outlets are designed to be aerodynamically optimal. A layer of Special Foam cleverly placed inside reduces wind noise without compromising ventilation performance. Fixed chin spoiler Reduces wind noise & helps remove hot air from the face area. Road debris is better deflected from the neck. Depending on the model, various Arai helmets have a pull-out wind deflector in the chin area. VAS Max Vision Visor The VAS MAX Vision visor provides better vision in all weather & driving conditions as standard. Visor lock Adapted from Arai s F1 helmets, the completely modified 3D visor lock that reliably ensures that the visor does not open by itself. The operation to open the visor without resistance is intuitive- with one finger- even with gloves. Pinlock lens Effectively prevents fogging of the visor. Clear vision, even in adverse weather conditions. Easy to remove for changing or cleaning. Antimicrobial lining This skin-friendly, antibacterial material is very pleasant to our skin. With the aim of developing a softer & even more comfortable inner padding, the material used to hold the padding has also been enhanced & made softer. The pad has a changeable insert that allows for personalization Interchangeable ear pads/cheek pads Cheek pads/cheek ear pads (Jet helmets) can be removed very easily. All parts, replaceable or not, can be cleaned well with lukewarm water & very mild soap. Rinse well with clean water afterwards & do not let things dry in direct sunlight or near a heat source. All interior parts come in different sizes & thicknesses to allow for a custom fit for each driver. Remove by taking out the back first Insert by putting the front side in first Interior: Replaceable inner lining All the inner padding can be removed very easily. All parts, replaceable or not, can be cleaned well with lukewarm water & very mild soap. Afterwards, rinse well with clean water & do not let them dry in direct sunlight or near a heat source. All interior parts are available in different sizes & thicknesses to provide an individual fit for each driver. Speaker Pockets Built-in communication systems are popular, but the problem is often that space for speakers is limited or non-existent, resulting in unwanted pressure points. The special speaker pockets that allow speakers to be mounted without skimping on comfort or fit. (Speakers not included). Facial Contour System (FCS) The Facial Contour System (FCS) works with a spring mechanism in the cheek pads, providing a tight fit & more comfort on the lower jaw without applying too much pressure. 5 mm removable ear pads/cheek pads. The cheek pads provide even easier fit & comfort, & have a 5mm peel-off layer to free up space when needed. Emergency Release System (ERS) Allows faster access to an injured rider. Pulling the orange tabs integrated into the pads causes the cheek pads to fall out. This makes it easier for rescue workers to remove the helmet. This reduces the risk of further injury. Air supply control Work in conjunction with the "dual-pivot®" chin vent. Fresh air is directed directly onto the surface of the visor & at the same time stale air is directed away from it downwards. Note Please be aware, as long as nothing else is written in the item description: All helmets will be delivered only with the ECE certification by default, even if it is shown differently. all helmets that have a visor will be delivered with a clear visor, even if it is shown differently.



...

Cutting-edge technology with a vintage look! A tribute to the classic style of the 1980s, the Concept-X is equipped with the latest technologies in protection & comfort. A simple & sophisticated shape that is not categorized by any genre. In addition to the internal ventilation system of Arai, the helmet has the complete system interior, which also has almost the same materials as the racing helmets. A " Neo Classic" helmet that is not only suitable for classic motorcycles & cruisers but also fits the latest motorcycles. Features PB-e c Lc outer shell made from the original Arai super fiber & a newly developed resin New Arai system: three exhaust vents are placed at the top, so that air flows through the air duct in the liner & is efficiently exhausted by negative pressure through the slot at the back of the head while riding. The highly efficient ventilation is realized while maintaining a simple & clean surface. VAS System: compact visor with variable axis system, better protection in the temple areas without compromising the field of vision. FCS face contour system: perfect fit for any type of face Antibacterial, stain-resistant & deodorizing Ecopure interior. Fully removable &

Washable.

" Peel-off" five millimeter thick, removable foam layer that provides more room if desired without having to purchase an optional part Handmade The Concept-X has far exceeded all standard tests: Arai s main goal is to make the safest helmets in the world Can be used with PSS (Pro Shade System) visor: the all-weather solution against fogging, haze & sun glare (sold separately) Approved according to ECE 22-06 Shell construction: PB e-c Lc (Peripherally Belted e-Complex Laminate Construction). The Concept-X s outer shell features e-complex laminate construction (PB e-c Lc), further reinforced by the "peripheral belt" in the front of the head, which in turn increases strength to better dissipate impact forces & distribute energy. New materials have been used to replace the AR mat as the middle layer, resulting in a significant weight reduction. However, the strength remains the same as the PB-c Lc construction. Variable Axis System (VAS) With VAS, the visor attachment has been moved downward, resulting in an average of an advantageous 24 mm of space on both temple sides, bringing the helmet even closer to the ideal shape with even better glide. Thus, several areas of the shell can become harder, according to the test ranges of the Snell standard or even beyond. Concept-XE Ventilation The Concept-XE s sleek outer shell hides a secret: Arai s internal ventilation system. Cooling air passes through the visor s eyebrow-level vents, through the comfort liner & three top vents, & out through a hidden, multi-stage air duct inside the EPS liner via the negative pressure created by the combined venturi effect of the side vents & the neck vent. At the front, six mesh-covered slots can be closed to prevent fogging & opened for airflow. Free Flow System (FFS) Creates an airflow under the helmet that specifically reduces wind noise & air turbulence while promoting the expulsion of warm, stale air out of the helmet. Concealed multi-stage air duct Warm air can be directed through three openings in the EPS inner shell to the dual Venturi vacuum exhaust vents. Ventilation above the eyes Fresh air can be directed to the user s forehead/sleep area without the need to drill additional holes in the shell of the helmet. Internal closure (latch) for chin ventilation. To prevent the ingress of coarse dirt, the chin vents are in addition adjustable from the inside at the side. Neck vent flaps To direct warm & stale air out of the helmet in a targeted manner. At the same time, this creates an increased air flow in the lower helmet area. Side vents Additional side air vents in the lower helmet area guide warm & stale air out of the helmet. Integrated into the shell construction, these outlets are designed to be aerodynamically optimal. A layer of Special Foam cleverly placed inside reduces wind noise without compromising ventilation performance. Fixed chin spoiler Reduces wind noise & helps remove hot air from the face area. Road debris is better deflected from the neck. Depending on the model, various Arai helmets have a pull-out wind deflector in the chin area. VAS Max Vision Visor The VAS MAX Vision visor provides better vision in all weather & driving conditions as standard. Visor lock Adapted from Arai s F1 helmets, the completely modified 3D visor lock that reliably ensures that the visor does not open by itself. The operation to open the visor without resistance is intuitive- with one finger- even with gloves. Pinlock lens Effectively prevents fogging of the visor. Clear vision, even in adverse weather conditions. Easy to remove for changing or cleaning. Antimicrobial lining This skin-friendly, antibacterial material is very pleasant to our skin. With the aim of developing a softer & even more comfortable inner padding, the material used to hold the padding has also been enhanced & made softer. The pad has a changeable insert that allows for personalization Interchangeable ear pads/cheek pads Cheek pads/cheek ear pads (Jet helmets) can be removed very easily. All parts, replaceable or not, can be cleaned well with lukewarm water & very mild soap. Rinse well with clean water afterwards & do not let things dry in direct sunlight or near a heat source. All interior parts come in different sizes & thicknesses to allow for a custom fit for each driver. Remove by taking out the back first Insert by putting the front side in first Interior: Replaceable inner lining All the inner padding can be removed very easily. All parts, replaceable or not, can be cleaned well with lukewarm water & very mild soap. Afterwards, rinse well with clean water & do not let them dry in direct sunlight or near a heat source. All interior parts are available in different sizes & thicknesses to provide an individual fit for each driver. Speaker Pockets Built-in communication systems are popular, but the problem is often that space for speakers is limited or non-existent, resulting in unwanted pressure points. The special speaker pockets that allow speakers to be mounted without skimping on comfort or fit. (Speakers not included). Facial Contour System (FCS) The Facial Contour System (FCS) works with a spring mechanism in the cheek pads, providing a tight fit & more comfort on the lower jaw without applying too much pressure. 5 mm removable ear pads/cheek pads. The cheek pads provide even easier fit & comfort, & have a 5mm peel-off layer to free up space when needed. Emergency Release System (ERS) Allows faster access to an injured rider. Pulling the orange tabs integrated into the pads causes the cheek pads to fall out. This makes it easier for rescue workers to remove the helmet. This reduces the risk of further injury. Air supply control Work in conjunction with the "dual-pivot®" chin vent. Fresh air is directed directly onto the surface of the visor & at the same time stale air is directed away from it downwards. Note Please be aware, as long as nothing else is written in the item description: All helmets will be delivered only with the ECE certification by default, even if it is shown differently. all helmets that have a visor will be delivered with a clear visor, even if it is shown differently.



...