More From Contributor

kr913.33 SEK
The multi-panel Booster v 2 Glove is made from premium leather & incorporates an over-molded viscoelastic knuckle guard for optimized levels of protection. Features Constructed from durable goat leather & abrasion resistant stretch polyester fabric for comfort & protection Innovative microfiber & PU grip panels strategically position on palm & thumb for excellent levels of grip control & durability Premium, full-grain leather palm construction is durable & offers excellent abrasion resistance. Viscoelastic knuckle pad for softness & comfort Viscoelastic Level 1 knuckle protector provides impact & abrasion protection (EN 13594 2015) Guard is reinforced on the interior side with foam for enhanced levels of fit, comfort & shock absorption Alpinestars’ exclusive ergonomic stretch insert between palm & thumb offers enhanced range of hand movement & greater sensitivity while operating the bike controls Accordions on fingers & back hand for all-round movement & comfort Alpinestars’ patented third & fourth finger bridge prevents seam failure & finger separation in the event of a slide Viscoelastic protector provides impact & abrasion protection. Guard is reinforced on the interior side with thick foam for enhanced levels of fit, comfort & shock absorption Palm, thumb & fingers padded with energy absorbing foam for additional protection Wrist flap with hook & loop on cuff provides a secure closure Little finger side wall leather reinforcement for abrasion resistance Touchscreen compatible index fingertip & thumb allow the use of smartphone & GPS systems Pre-curved finger construction reduces rider fatigue while offering excellent comfort & fit New construction for reduced seams & enhanced rider comfort ...
Available
kr941.06 SEK
The multi-panel Booster v 2 Glove is made from premium leather & incorporates an over-molded viscoelastic knuckle guard for optimized levels of protection. Features Constructed from durable goat leather & abrasion resistant stretch polyester fabric for comfort & protection Innovative microfiber & PU grip panels strategically position on palm & thumb for excellent levels of grip control & durability Premium, full-grain leather palm construction is durable & offers excellent abrasion resistance. Viscoelastic knuckle pad for softness & comfort Viscoelastic Level 1 knuckle protector provides impact & abrasion protection (EN 13594 2015) Guard is reinforced on the interior side with foam for enhanced levels of fit, comfort & shock absorption Alpinestars’ exclusive ergonomic stretch insert between palm & thumb offers enhanced range of hand movement & greater sensitivity while operating the bike controls Accordions on fingers & back hand for all-round movement & comf... ...
Available
kr941.06 SEK
The multi-panel Booster v 2 Glove is made from premium leather & incorporates an over-molded viscoelastic knuckle guard for optimized levels of protection. Features Constructed from durable goat leather & abrasion resistant stretch polyester fabric for comfort & protection Innovative microfiber & PU grip panels strategically position on palm & thumb for excellent levels of grip control & durability Premium, full-grain leather palm construction is durable & offers excellent abrasion resistance. Viscoelastic knuckle pad for softness & comfort Viscoelastic Level 1 knuckle protector provides impact & abrasion protection (EN 13594 2015) Guard is reinforced on the interior side with foam for enhanced levels of fit, comfort & shock absorption Alpinestars’ exclusive ergonomic stretch insert between palm & thumb offers enhanced range of hand movement & greater sensitivity while operating the bike controls Accordions on fingers & back hand for all-round movement & comf... ...
Available
kr941.06 SEK
The multi-panel Booster v 2 Glove is made from premium leather & incorporates an over-molded viscoelastic knuckle guard for optimized levels of protection. Features Constructed from durable goat leather & abrasion resistant stretch polyester fabric for comfort & protection Innovative microfiber & PU grip panels strategically position on palm & thumb for excellent levels of grip control & durability Premium, full-grain leather palm construction is durable & offers excellent abrasion resistance. Viscoelastic knuckle pad for softness & comfort Viscoelastic Level 1 knuckle protector provides impact & abrasion protection (EN 13594 2015) Guard is reinforced on the interior side with foam for enhanced levels of fit, comfort & shock absorption Alpinestars’ exclusive ergonomic stretch insert between palm & thumb offers enhanced range of hand movement & greater sensitivity while operating the bike controls Accordions on fingers & back hand for all-round movement & comf... ...
Available
kr941.06 SEK
The multi-panel Booster v 2 Glove is made from premium leather & incorporates an over-molded viscoelastic knuckle guard for optimized levels of protection. Features Constructed from durable goat leather & abrasion resistant stretch polyester fabric for comfort & protection Innovative microfiber & PU grip panels strategically position on palm & thumb for excellent levels of grip control & durability Premium, full-grain leather palm construction is durable & offers excellent abrasion resistance. Viscoelastic knuckle pad for softness & comfort Viscoelastic Level 1 knuckle protector provides impact & abrasion protection (EN 13594 2015) Guard is reinforced on the interior side with foam for enhanced levels of fit, comfort & shock absorption Alpinestars’ exclusive ergonomic stretch insert between palm & thumb offers enhanced range of hand movement & greater sensitivity while operating the bike controls Accordions on fingers & back hand for all-round movement & comf... ...
Available
kr7727.07 SEK
Designed for the most extreme adventure explorers, the Boulder 3L Gore-Tex Pants feature a new comfort fit with a pre-curved pattern derived from motocross, a 3L laminated Gore-Tex construction for perfect waterproofing & breathability, & direct ventilation ports for climate control. The Boulder Pants are the pinnacle of Alpinestars hard-adventure pants. Constructed from premium durable materials including a 3L Gore-Tex main shell, with a 3L reinforced Gore-Tex shell in the seat, the pants also incorporate 2L Gore-Tex stretch material in the crotch, above the knees, & behind the knees. Reinforcing the knees further are Superfabric ceramic plate inserts for ultra-durability & abrasion resistance, while at the same time maintaining flex & breathability. In addition, the pants have leather & ballistic nylon reinforcements on the inner knee & lower inner leg. Other features include Level 2 knee armor as well as a magnetic buckle waist closure, plus waterproof, ergonomic cargo pockets. The Boulder 3L Gore-Tex Pants’ pattern incorporates pre-curved waist & knees derived from motocross development to provide perfect mobility & comfort for off-road riders who experience many transitions of standing up & sitting on the bike. With a wide pant leg, the pants easily fit over MX boots such as the Tech 7 Drystar® Boots. Together, the Boulder 3L Gore-Tex Jacket & Pants are the perfect outfit for riders ready to travel the world in the most extreme weather conditions & over the toughest terrains. The Boulder Gore-Tex Pants are ultra-rugged & durable. Features Laminated Gore-Tex chassis for 100% guaranteed waterproof & breathable performance Laminated 3L Gore-Tex fabric for effective protection against the elements & guaranteed levels of waterproofing & breathability without excessive material bulk, thus preventing waterlogging Advanced direct ventilation system with inner channel to efficiently distribute the air flow with direct ventilation ports for additional ventilation Knee-down comfort when working around the bike or doing camping activities Multi-fabric main shell construction with strategically positioned Superfabric® reinforcements for superior durability & abrasion resistance Fully certified motorcycling garment to
- Category II EN 17092-4:2020 – A Class Level 2 Category II EN 1621-1:2012 Nucleon Flex Pro knee armor Level 1 Category II EN 1621-1:2012 Bioflex hip armor, as optional upgrade
...
Available
kr7727.07 SEK
Designed for the most extreme adventure explorers, the Boulder 3L Gore-Tex Pants feature a new comfort fit with a pre-curved pattern derived from motocross, a 3L laminated Gore-Tex construction for perfect waterproofing & breathability, & direct ventilation ports for climate control. The Boulder Pants are the pinnacle of Alpinestars hard-adventure pants. Constructed from premium durable materials including a 3L Gore-Tex main shell, with a 3L reinforced Gore-Tex shell in the seat, the pants also incorporate 2L Gore-Tex stretch material in the crotch, above the knees, & behind the knees. Reinforcing the knees further are Superfabric ceramic plate inserts for ultra-durability & abrasion resistance, while at the same time maintaining flex & breathability. In addition, the pants have leather & ballistic nylon reinforcements on the inner knee & lower inner leg. Other features include Level 2 knee armor as well as a magnetic buckle waist closure, plus waterproof, ergonomic cargo pockets. The Boulder 3L Gore-Tex Pants’ pattern incorporates pre-curved waist & knees derived from motocross development to provide perfect mobility & comfort for off-road riders who experience many transitions of standing up & sitting on the bike. With a wide pant leg, the pants easily fit over MX boots such as the Tech 7 Drystar® Boots. Together, the Boulder 3L Gore-Tex Jacket & Pants are the perfect outfit for riders ready to travel the world in the most extreme weather conditions & over the toughest terrains. The Boulder Gore-Tex Pants are ultra-rugged & durable. Features Laminated Gore-Tex chassis for 100% guaranteed waterproof & breathable performance Laminated 3L Gore-Tex fabric for effective protection against the elements & guaranteed levels of waterproofing & breathability without excessive material bulk, thus preventing waterlogging Advanced direct ventilation system with inner channel to efficiently distribute the air flow with direct ventilation ports for additional ventilation Knee-down comfort when working around the bike or doing camping activities Multi-fabric main shell construction with strategically positioned Superfabric® reinforcements for superior durability & abrasion resistance Fully certified motorcycling garment to
- Category II EN 17092-4:2020 – A Class Level 2 Category II EN 1621-1:2012 Nucleon Flex Pro knee armor Level 1 Category II EN 1621-1:2012 Bioflex hip armor, as optional upgrade
...
Available
kr7727.07 SEK
Designed for the most extreme adventure explorers, the Boulder 3L Gore-Tex Pants feature a new comfort fit with a pre-curved pattern derived from motocross, a 3L laminated Gore-Tex construction for perfect waterproofing & breathability, & direct ventilation ports for climate control. The Boulder Pants are the pinnacle of Alpinestars hard-adventure pants. Constructed from premium durable materials including a 3L Gore-Tex main shell, with a 3L reinforced Gore-Tex shell in the seat, the pants also incorporate 2L Gore-Tex stretch material in the crotch, above the knees, & behind the knees. Reinforcing the knees further are Superfabric ceramic plate inserts for ultra-durability & abrasion resistance, while at the same time maintaining flex & breathability. In addition, the pants have leather & ballistic nylon reinforcements on the inner knee & lower inner leg. Other features include Level 2 knee armor as well as a magnetic buckle waist closure, plus waterproof, ergonomic cargo pockets. The Boulder 3L Gore-Tex Pants’ pattern incorporates pre-curved waist & knees derived from motocross development to provide perfect mobility & comfort for off-road riders who experience many transitions of standing up & sitting on the bike. With a wide pant leg, the pants easily fit over MX boots such as the Tech 7 Drystar® Boots. Together, the Boulder 3L Gore-Tex Jacket & Pants are the perfect outfit for riders ready to travel the world in the most extreme weather conditions & over the toughest terrains. The Boulder Gore-Tex Pants are ultra-rugged & durable. Features Laminated Gore-Tex chassis for 100% guaranteed waterproof & breathable performance Laminated 3L Gore-Tex fabric for effective protection against the elements & guaranteed levels of waterproofing & breathability without excessive material bulk, thus preventing waterlogging Advanced direct ventilation system with inner channel to efficiently distribute the air flow with direct ventilation ports for additional ventilation Knee-down comfort when working around the bike or doing camping activities Multi-fabric main shell construction with strategically positioned Superfabric® reinforcements for superior durability & abrasion resistance Fully certified motorcycling garment to
- Category II EN 17092-4:2020 – A Class Level 2 Category II EN 1621-1:2012 Nucleon Flex Pro knee armor Level 1 Category II EN 1621-1:2012 Bioflex hip armor, as optional upgrade
...
Available
kr7433.11 SEK
Designed for the most extreme adventure explorers, the Boulder 3L Gore-Tex Pants feature a new comfort fit with a pre-curved pattern derived from motocross, a 3L laminated Gore-Tex construction for perfect waterproofing & breathability, & direct ventilation ports for climate control. The Boulder Pants are the pinnacle of Alpinestars hard-adventure pants. Constructed from premium durable materials including a 3L Gore-Tex main shell, with a 3L reinforced Gore-Tex shell in the seat, the pants also incorporate 2L Gore-Tex stretch material in the crotch, above the knees, & behind the knees. Reinforcing the knees further are Superfabric ceramic plate inserts for ultra-durability & abrasion resistance, while at the same time maintaining flex & breathability. In addition, the pants have leather & ballistic nylon reinforcements on the inner knee & lower inner leg. Other features include Level 2 knee armor as well as a magnetic buckle waist closure, plus waterproof, ergonomic cargo... ...
Available
kr7727.07 SEK
Designed for the most extreme adventure explorers, the Boulder 3L Gore-Tex Pants feature a new comfort fit with a pre-curved pattern derived from motocross, a 3L laminated Gore-Tex construction for perfect waterproofing & breathability, & direct ventilation ports for climate control. The Boulder Pants are the pinnacle of Alpinestars hard-adventure pants. Constructed from premium durable materials including a 3L Gore-Tex main shell, with a 3L reinforced Gore-Tex shell in the seat, the pants also incorporate 2L Gore-Tex stretch material in the crotch, above the knees, & behind the knees. Reinforcing the knees further are Superfabric ceramic plate inserts for ultra-durability & abrasion resistance, while at the same time maintaining flex & breathability. In addition, the pants have leather & ballistic nylon reinforcements on the inner knee & lower inner leg. Other features include Level 2 knee armor as well as a magnetic buckle waist closure, plus waterproof, ergonomic cargo pockets. The Boulder 3L Gore-Tex Pants’ pattern incorporates pre-curved waist & knees derived from motocross development to provide perfect mobility & comfort for off-road riders who experience many transitions of standing up & sitting on the bike. With a wide pant leg, the pants easily fit over MX boots such as the Tech 7 Drystar® Boots. Together, the Boulder 3L Gore-Tex Jacket & Pants are the perfect outfit for riders ready to travel the world in the most extreme weather conditions & over the toughest terrains. The Boulder Gore-Tex Pants are ultra-rugged & durable. Features Laminated Gore-Tex chassis for 100% guaranteed waterproof & breathable performance Laminated 3L Gore-Tex fabric for effective protection against the elements & guaranteed levels of waterproofing & breathability without excessive material bulk, thus preventing waterlogging Advanced direct ventilation system with inner channel to efficiently distribute the air flow with direct ventilation ports for additional ventilation Knee-down comfort when working around the bike or doing camping activities Multi-fabric main shell construction with strategically positioned Superfabric® reinforcements for superior durability & abrasion resistance Fully certified motorcycling garment to
- Category II EN 17092-4:2020 – A Class Level 2 Category II EN 1621-1:2012 Nucleon Flex Pro knee armor Level 1 Category II EN 1621-1:2012 Bioflex hip armor, as optional upgrade
...
Available

Alpinestars Booster, Gloves

The multi-panel Booster Glove is made from premium leather and incorporates an over-molded hard-knuckle guard for optimized levels of protection. Featuring Alpinestars’ stretch palm insert as well as grip panels the Booster provides excellent sensitivity on the bike’s controls. Features Constructed from durable goat leather associated with high abrasion resistant stretch polyester fabric Innovative microfiber and PU grip panels strategically position on palm and thumb for excellent levels of grip control and durability Premium, full-grain leather palm construction is durable and offers excellent abrasion resistance Alpinestars’ exclusive ergonomic stretch insert between palm and thumb offers improved range of hand movement and greater sensitivity while operating the bike controls
Accordion stretch inserts on fingers and back hand for all-round movement and comfort Alpinestars’ patented third and fourth finger bridge prevents seam failure and finger separation in the event of a slide Molded hard-knuckle protector provides impact and abrasion protection. Guard is reinforced on the interior side with thick EVA foam for improved levels of fit, comfort and shock absorption Palm, thumb and fingers padded with energy absorbing EVA foam for additional protection Wrist flap with velcro on cuff provides a secure closure Little finger side wall suede reinforcement for abrasion resistance Touchscreen compatible index fingertip and thumb allow the use of smartphone and GPS systems Pre-curved finger construction reduces rider fatigue while offering excellent comfort and fit
RIP - This product is no longer available on our network. It was last seen on 24.06.2022

This page now acts as a permanent archive for this product. Add more information using the comments box below to ensure it can still be found by future generations.

Use our search facility to see if it is available from an alternative contributor.
  • Availability: Out Of Stock
  • Supplier: Motoin SE
  • SKU: 46509
Availability: In Stock
kr526.00

Product Description

The multi-panel Booster Glove is made from premium leather & incorporates an over-molded hard-knuckle guard for optimized levels of protection. Featuring Alpinestars’ stretch palm insert as well as grip panels the Booster provides excellent sensitivity on the bike’s controls. Features Constructed from durable goat leather associated with high abrasion resistant stretch polyester fabric Innovative microfiber & PU grip panels strategically position on palm & thumb for excellent levels of grip control & durability Premium, full-grain leather palm construction is durable & offers excellent abrasion resistance Alpinestars’ exclusive ergonomic stretch insert between palm & thumb offers enhanced range of hand movement & greater sensitivity while operating the bike controls Accordion stretch inserts on fingers & back hand for all-round movement & comfort Alpinestars’ patented third & fourth finger bridge prevents seam failure & finger separation in the event of a slide Molded hard-knuckle protector provides impact & abrasion protection. Guard is reinforced on the interior side with thick EVA foam for enhanced levels of fit, comfort & shock absorption Palm, thumb & fingers padded with energy absorbing EVA foam for additional protection Wrist flap with velcro on cuff provides a secure closure Little finger side wall suede reinforcement for abrasion resistance Touchscreen compatible index fingertip & thumb allow the use of smartphone & GPS systems Pre-curved finger construction reduces rider fatigue while offering excellent comfort & fit

Reviews/Comments

Add New

Intelligent Comparison

Oooops!
We couldn't find anything!
Perhaps this product's unique.... Or perhaps we are still looking for comparisons!
Click to bump this page and we'll hurry up.

Price History

Vouchers

No voucher codes found.
Do you know a voucher code for this product or supplier? Add it to Insights for others to use.

Facebook

Jargon Buster

Polyester - A synthetic fibre with improved wrinkle resistance
Leather - Durable and flexible made from the tanning of an animals raw hide
GPS - Global Positioning System - Global position using satellites
Ergonomic - A specific design to fit the purpose of the user
Foam - A stubstance formed by trapping air in a solid or liquid
Hand - A part of the body at the end of the arm
Hand - A pointer which indicates time on a clock face
Palm - The centre of a hand when facing upwards
Palm - A hardware manufacturer of smart phones and personal digital assistants
fatigue - A medical aspect of tiredness.
Wall - A physical barrier between two areas
Velcro - a combination of hairs and hooks to attach two surfaces together.
Leather - Made from animal hides, is a flexible and durable material
Suede - a type of leather. Suede has a soft brushed finish.
Comfort - something that feels nice to the user. Often relaxing.
Polyester - A man made fibre from chemicals. Often refers to polyethylene terephthalate.
Padded - Something with an extra cushion or boost.
Reinforced - Relating to structure, making it more sturdy.
Patented - Something that has legal rights not to be copied, unique.
Resistant - Something that can repel against something.
Abrasion - Something that can become damage through wear and tar via scraping or wearing away.
Exclusive - Something that is not including other things.
Cuff - A band of fabric towards the end of a sleeve that can be turned back or fastened usually with a button.
Innovative - An idea that shows new method and ways of thinking, an original design.
Interior - The inside of something, usually what is not visible.

Supplier Information

Motoin SE
Page Updated: 2025-02-05 20:08:21

Community Generated Product Tags

Oh No! The productWIKI community hasn't generated any tags for this product yet!
Menu