Its superior modularity allows 4 different configurations, simply removing the redesigned peak & the ultra-panoramic visor. The lightweight construction of the Carbon-, Aramid-, glass reinforced fiber shell provides AGV highest safety standards, while premium interiors are water resistant & extremely comfortable. Aerodynamics & ventilation reach a new standard thanks to new extractors & the new adjustable chin guard port that can direct internal air flows where the rider need. The low weight, the wearing comfort as well as the adjustment possibilities stand for top-class helmet technology. Aerodynamics Adjustable peak designed to limit sail effect Interiors Cheek pads: fresh & fluid Ritmo fabric Crown pad: Shalimar fabric for a soft & gentle touch Fit especially designed to allow wearing glasses Neck roll: Shalimar & Nabuk fabric with water resistant treatment Ready for ARK communication system Removable & washable interiors Removable wind protector Shell 3 shell sizes 4-density EPS developed in 4 sizes Carbon-Aramid-Fiberglass Ventilation 2 rear extractors 3 front vents Adjustable air vents Chin guard air vent removable without tools Max vetilation grid installed under the air vent Internal deflector on the chin guard air vent Visor 100% Max Vision Pinlock included Anti-scratch Anti-fog Goggles ready Micro-opening system Multistep visor mechanism Retention system Double D Weight 1.365 gr. in first shell size Homologation ECE 22.05 Test ratings Ratet VERY GOOD 93/100 by Motorrad & Reisen issue 107 Safety is not enough Every AGV helmet has to excel in terms of protection, performance & comfort. Beyond regulations & what’s expected, attention to every detail is an obsession, one that stretches the meaning of perfection ever further. That’s how Extreme Safety came into being. This exclusive AGV design protocol ensures the ultimate balance of all components through the manufacturing processes, choice of materials & functional design. The end product outperforms certification requirements, because every helmet has to pass tests that are even more demanding. Setting new safety standards, not just following them: that’s how legends are made. Shock Absorption Impact protection is one of the most stringent Extreme Safety assessment criteria. AGV helmets are designed to outperform homologation requirements & offer a higher level of safety. AGV ensures this by performing tests that subject them to much greater stress than certifying bodies. The most stringent legislation requires an impact test at 6 different points with a velocity of 7.5 m/s. AGV helmets are tested at up to 15 different points, including the visor, with a velocity of 8.5 m/s. The end result is G* & HIC* value measurements indicating up to 50% higher protection than the thresholds required for ECE homologation. *G
- This is the measurement of the force transmitted to the head in an impact. It indicates the shock absorption capacity of a helmet: The lower the value, the higher the helmet s absorption capacity, resulting in less force being transmitted to the rider s head. *HIC
- This is the value of the force transmitted to the head in an impact, measured over a time duration that simulates a real fall. This test is used to assess the probability of possible brain damage following an impact. The lower the HIC value, the higher the helmet s protective capacity, resulting in increased safety for the rider s head. Impact Areas To measure shock absorption capacity, the most stringent legislation in the world requires an impact test at 6 defined points on a helmet, excluding the visor, with a velocity of 7.5 m/s. The AGV Extreme Safety protocol requires testing of up to 15 points at a velocity of 8.5 m/s. This ensures that superior protection is guaranteed all over, not just in specific points, including the visor. Side Protection We’re obsessed with designing the smallest possible visor mechanisms. It’s not about aesthetics. The visor mechanism can’t be covered by the shell or EPS liners, making it a weak point in the event of impact. At the same time, a very small mechanism allows a visor that’s wider at the sides to be fitted, thus increasing peripheral vision & the ability to see obstacles & potential dangers that could affect the bike. AGV helmets have visor mechanisms up to 70% smaller than the market average. Safety is not a detail. Every detail makes the difference. Face Protection Visors on AGV helmets are up to four times as thick as an average standard visor. They are an integral part of the helmet’s protective system, not a weak point but a shield against impact. Ultravision
- Peripheral Vision Unhampered vision allows complete control. AGV takes the blinders off helmets. The smaller visor mechanisms & shape of the shell do away with a limitation common to most helmets on the market. AGV helmet construction allows peripheral vision up to 190°. This amazing achievement lets you see what’s happening at the edges of your visual field earlier & better: obstacles, corners, vehicles, the competition. Control means safety & confidence. Vertical Vision Professional riders know better than anyone else that, when you’re tucked in, your eyes need to be directed upwards to see what’s going on around you. In that position, the top edge of the helmet is a limitation on the visual field, often a very dangerous one. Many use handmade solutions to raise the helmet, so that safety takes second place. AGV helmets are designed to guarantee a greater vertical visual field than an average helmet, optimized according to the riding position associated with the helmet type, be it racing, sport or touring. This decision increases performance & control, to look beyond obstacles in safety. Visual Quality Visors are curved lenses, which can create distortions that result in mental fatigue at the level of the brain & compromise performance, just like a bad pair of glasses. AGV helmet visors are in Optical Class 1, the highest possible. This guarantees that reflection & distortion are eliminated, for greater visual quality. Using an Optical Class 1 visor means that your brain receives accurate visual information. Clarity & depth of vision means concentration, precision & quick reactions. Safety is also in the eye of the beholder. Antifog Performance AGV visors are equipped with Max Vision Pinlock®. Max Vision has no negative impact on the optical quality of AGV’s wide visors, so that maximum visibility is guaranteed in all conditions. There’s total control of the road, always. Aerodynamic Stability The wind determines the shape. The wedge-shaped chin is designed to reduce drag & cut through the air. The aerodynamic appendages stabilize the helmet at high speeds & shift the turbulence beyond the rider. Be it touring, sport or racing, every AGV helmet is designed in a wind tunnel, for stability & so that riders can be confident in all their most extreme riding conditions. Dynamic Weight Studying different shapes in a wind tunnel makes it possible to reduce the weight of a helmet according to the speed at which it moves through a fluid like air. Z-lift – the tendency to push up or down in motion – can be used to offset a helmet’s static weight so that it literally floats. In addition to their extremely low weight, AGV helmets exploit this principle to reduce neck fatigue while riding. For example, the K6 is already lighter at 90 km/h. At 160 km/h, the Pista GP RR is weightless. Ventilation Reinventing ventilation seemed like an impossible task. We did it by taking into consideration the speed of the air passing through the helmet, not just the amount. The front air vent – a distinctive feature of AGV helmets – exploits the point of the helmet where the impact of air flow is greatest to generate high intake pressure. The ducts on AGV racing helmet chinguards, as on the Pista GP RR, increase the intake air volume in the lower part of the helmet, enhancing comfort & ventilation even in extreme conditions. Venturi Effect The Venturi effect makes a great contribution to ventilation. AGV helmets are designed to generate low pressure in the rear extractor area, producing a vortex effect that increases the speed of transition from inside to outside of helmet exponentially, enhancing heat transfer. Superior Comfort AGV interiors are made using extremely high-quality materials, developed for the smoothest & most comfortable helmet fit possible. All AGV helmets are designed to absorb sweat & moisture extremely quickly, to ensure maximum comfort & concentration on the road. The leather or fabric outer profiles are water repellent so that the inner lining doesn’t get wet even in extremely heavy rain. Research into materials It isn’t enough to choose refined raw materials & advanced components. Every component, every mechanism & every detail is designed to be as effective as possible in concert with the others & provide the very best performance in all conditions. So using carbon fiber in the shells & titanium in the double D fasteners, both light & highly resistant, makes it possible to adopt metal alloy air vents. They’re heavier but definitely tougher than the classic plastic vents. This means that the helmets always have the very lowest weights in their categories. This is the real essence of AGV. This is the authentic perfection of obsession. Note Please be aware, as long as nothing else is written in the item description: All helmets will be delivered only with the ECE certification by default, even if it is shown differently. all helmets that have a visor will be delivered with a clear visor, even if it is shown differently.


...

Lightness, comfort & adaptability reach the highest technological level in the AGV AX9. Its superior modularity allows 4 different confi gurations, simply removing the redesigned peak & the ultra-panoramic visor. The lightweight construction of the Carbon+ Aramid+ Glass fi ber shell provides AGV highest safety standards, while premium interiors are water resistant & extremely comfortable. Aerodynamics & ventilation reach a new standard thanks to new extractors & the new adjustable chin guard port that can direct internal air fl ows where the rider need. Features Shell in Carbon-Aramidic-Fiberglass engineered in 3 shell sizes with 4-density EPS structure developed in 4 sizes. Integrated Ventilation System with 3 large front vents & 2 rear extractors hollowed in the shell which direct air to the rider’s head. All vents are adjustable. Internal defl ector on the chin guard air vent to direct air to the chin or to the visor. Chin guard air vent removable without tools. Removable nose guard. Max ventilation grid installed under the air vent. Interiors’ construction is engineered to allow an embracing, pressure-free fi t & to reduce the noise inside the helmet. Removable wind protector. The interior of the helmet is designed to offer the highest riding comfort. All parts are easily removable & washable: Neck roll: Shalimar & Nabuk fabric with water resistant treatment prevents water from being channeled inside the helmet. Cheek pads: Ritmo fabric with Sanitized (antibacterial protection), 2 Dry (moisture wicking) & Microsense (premium skin comfort & wearing fl uidity) treatments. Crown pad: Shalimar with the same treatments listed for cheek pads. Fit especially designed to allow wearing glasses. Ultra-wide anti-scratch visor with 100% Max Vision Pinlock® anti-fog technology. Visor mechanism with multiple steps. A dedicated visor mechanism to use when the peak is in the lower position is included in the box. Visor micro-opening system to boost airfl ow. Adjustable peak designed to limit sail effect & enhance stability at high speed. Dual purpose: the visor can be removed & the helmet used with an off-road mask. The peak can be removed for a naked confi guration. Double D retention system. Ready for generic communication system. ECE 2205 Weight 1.445g (+/-50g) Note Please note that as long as nothing else is written in the article description, all helmets that have a visor as standard will be delivered with a clear one, even if it is shown differently. ...

Its superior modularity allows 4 different configurations, simply removing the redesigned peak & the ultra-panoramic visor. The lightweight construction of the Carbon-, Aramid-, glass reinforced fiber shell provides AGV highest safety standards, while premium interiors are water resistant & extremely comfortable. Aerodynamics & ventilation reach a new standard thanks to new extractors & the new adjustable chin guard port that can direct internal air flows where the rider need. The low weight, the wearing comfort as well as the adjustment possibilities stand for top-class helmet technology. Aerodynamics Adjustable peak designed to limit sail effect Interiors Cheek pads: fresh & fluid Ritmo fabric Crown pad: Shalimar fabric for a soft & gentle touch Fit especially designed to allow wearing glasses Neck roll: Shalimar & Nabuk fabric with water resistant treatment Ready for ARK communication system Removable & washable interiors Removable wind protector Shell 3 shell sizes 4-density E... ...

Lightness, comfort & adaptability reach the highest technological level in the AGV AX9. Its superior modularity allows 4 different confi gurations, simply removing the redesigned peak & the ultra-panoramic visor. The lightweight construction of the Carbon+ Aramid+ Glass fi ber shell provides AGV highest safety standards, while premium interiors are water resistant & extremely comfortable. Aerodynamics & ventilation reach a new standard thanks to new extractors & the new adjustable chin guard port that can direct internal air fl ows where the rider need. Features Shell in Carbon-Aramidic-Fiberglass engineered in 3 shell sizes with 4-density EPS structure developed in 4 sizes. Integrated Ventilation System with 3 large front vents & 2 rear extractors hollowed in the shell which direct air to the rider’s head. All vents are adjustable. Internal defl ector on the chin guard air vent to direct air to the chin or to the visor. Chin guard air vent removable without tools. Removable nose guard. Max ventilation grid installed under the air vent. Interiors’ construction is engineered to allow an embracing, pressure-free fi t & to reduce the noise inside the helmet. Removable wind protector. The interior of the helmet is designed to offer the highest riding comfort. All parts are easily removable & washable: Neck roll: Shalimar & Nabuk fabric with water resistant treatment prevents water from being channeled inside the helmet. Cheek pads: Ritmo fabric with Sanitized (antibacterial protection), 2 Dry (moisture wicking) & Microsense (premium skin comfort & wearing fl uidity) treatments. Crown pad: Shalimar with the same treatments listed for cheek pads. Fit especially designed to allow wearing glasses. Ultra-wide anti-scratch visor with 100% Max Vision Pinlock® anti-fog technology. Visor mechanism with multiple steps. A dedicated visor mechanism to use when the peak is in the lower position is included in the box. Visor micro-opening system to boost airfl ow. Adjustable peak designed to limit sail effect & enhance stability at high speed. Dual purpose: the visor can be removed & the helmet used with an off-road mask. The peak can be removed for a naked confi guration. Double D retention system. Ready for generic communication system. ECE 2205 Weight 1.445g (+/-50g) Note Please note that as long as nothing else is written in the article description, all helmets that have a visor as standard will be delivered with a clear one, even if it is shown differently. ...

Lightness, comfort & adaptability reach the highest technological level in the AGV AX9. Its superior modularity allows 4 different confi gurations, simply removing the redesigned peak & the ultra-panoramic visor. The lightweight construction of the Carbon+ Aramid+ Glass fi ber shell provides AGV highest safety standards, while premium interiors are water resistant & extremely comfortable. Aerodynamics & ventilation reach a new standard thanks to new extractors & the new adjustable chin guard port that can direct internal air fl ows where the rider need. Features Shell in Carbon-Aramidic-Fiberglass engineered in 3 shell sizes with 4-density EPS structure developed in 4 sizes. Integrated Ventilation System with 3 large front vents & 2 rear extractors hollowed in the shell which direct air to the rider’s head. All vents are adjustable. Internal defl ector on the chin guard air vent to direct air to the chin or to the visor. Chin guard air vent removable without tools. Removable nose guard. Max ventilation grid installed under the air vent. Interiors’ construction is engineered to allow an embracing, pressure-free fi t & to reduce the noise inside the helmet. Removable wind protector. The interior of the helmet is designed to offer the highest riding comfort. All parts are easily removable & washable: Neck roll: Shalimar & Nabuk fabric with water resistant treatment prevents water from being channeled inside the helmet. Cheek pads: Ritmo fabric with Sanitized (antibacterial protection), 2 Dry (moisture wicking) & Microsense (premium skin comfort & wearing fl uidity) treatments. Crown pad: Shalimar with the same treatments listed for cheek pads. Fit especially designed to allow wearing glasses. Ultra-wide anti-scratch visor with 100% Max Vision Pinlock® anti-fog technology. Visor mechanism with multiple steps. A dedicated visor mechanism to use when the peak is in the lower position is included in the box. Visor micro-opening system to boost airfl ow. Adjustable peak designed to limit sail effect & enhance stability at high speed. Dual purpose: the visor can be removed & the helmet used with an off-road mask. The peak can be removed for a naked confi guration. Double D retention system. Ready for generic communication system. ECE 2205 Weight 1.445g (+/-50g) Note Please be aware, as long as nothing else is written in the item description: All helmets will be delivered only with the ECE certification by default all helmets that have a visor will be delivered with a clear visor, even if it is shown differently. ...

Lightness, comfort & adaptability reach the highest technological level in the AGV AX9. Its superior modularity allows 4 different configurations, simply removing the redesigned peak & the ultra-panoramic visor. The lightweight construction of the Carbon+ Aramid+ Glass fi ber shell provides AGV highest safety standards, while premium interiors are water resistant & extremely comfortable. Aerodynamics & ventilation reach a new standard thanks to new extractors & the new adjustable chin guard port that can direct internal air fl ows where the rider need. Features Shell in Carbon-Aramidic-Fiberglass engineered in 3 shell sizes (XXS-MS, ML-XL, XXL-3XL) with 4-density EPS structure developed in 4 sizes. Integrated Ventilation System with 3 large front vents & 2 rear extractors hollowed in the shell which direct air to the rider’s head. All vents are adjustable. Internal defl ector on the chin guard air vent to direct air to the chin or to the visor. Chin guard air vent removable without tools. Removable nose guard. Max ventilation grid installed under the air vent. Interiors’ construction is engineered to allow an embracing, pressure-free fit & to reduce the noise inside the helmet. Removable wind protector. The interior of the helmet is designed to offer the highest riding comfort. All parts are easily removable & washable: Neck roll: Shalimar & Nabuk fabric with water resistant treatment prevents water from being channeled inside the helmet. Cheek pads: Ritmo fabric with Sanitized (antibacterial protection), 2 Dry (moisture wicking) & Microsense (premium skin comfort & wearing fluidity) treatments. Crown pad: Shalimar with the same treatments listed for cheek pads. Fit especially designed to allow wearing glasses. Ultra-wide anti-scratch visor with 100% Max Vision Pinlock® anti-fog technology. Visor mechanism with multiple steps. A dedicated visor mechanism to use when the peak is in the lower position is included in the box. Visor micro-opening system to boost airflow. Adjustable peak designed to limit sail effect & enhance stability at high speed. Dual purpose: the visor can be removed & the helmet used with an off-road mask. The peak can be removed for a naked configuration. Double D retention system. Ready for generic communication system. Weight 1.445g (+/-50g) Note Please note that as long as nothing else is written in the article description, all helmets that have a visor as standard will be delivered with a clear one, even if it is shown differently. ...

Lightness, comfort & adaptability reach the highest technological level in the AGV AX9. Its superior modularity allows 4 different confi gurations, simply removing the redesigned peak & the ultra-panoramic visor. The lightweight construction of the Carbon+ Aramid+ Glass fi ber shell provides AGV highest safety standards, while premium interiors are water resistant & extremely comfortable. Aerodynamics & ventilation reach a new standard thanks to new extractors & the new adjustable chin guard port that can direct internal air fl ows where the rider need. Features Shell in Carbon-Aramidic-Fiberglass engineered in 3 shell sizes with 4-density EPS structure developed in 4 sizes. Integrated Ventilation System with 3 large front vents & 2 rear extractors hollowed in the shell which direct air to the rider’s head. All vents are adjustable. Internal defl ector on the chin guard air vent to direct air to the chin or to the visor. Chin guard air vent removable without tools. Removable nose guard. Max ventilation grid installed under the air vent. Interiors’ construction is engineered to allow an embracing, pressure-free fi t & to reduce the noise inside the helmet. Removable wind protector. The interior of the helmet is designed to offer the highest riding comfort. All parts are easily removable & washable: Neck roll: Shalimar & Nabuk fabric with water resistant treatment prevents water from being channeled inside the helmet. Cheek pads: Ritmo fabric with Sanitized (antibacterial protection), 2 Dry (moisture wicking) & Microsense (premium skin comfort & wearing fl uidity) treatments. Crown pad: Shalimar with the same treatments listed for cheek pads. Fit especially designed to allow wearing glasses. Ultra-wide anti-scratch visor with 100% Max Vision Pinlock® anti-fog technology. Visor mechanism with multiple steps. A dedicated visor mechanism to use when the peak is in the lower position is included in the box. Visor micro-opening system to boost airfl ow. Adjustable peak designed to limit sail effect & enhance stability at high speed. Dual purpose: the visor can be removed & the helmet used with an off-road mask. The peak can be removed for a naked confi guration. Double D retention system. Ready for generic communication system. ECE 2205 Weight 1.445g (+/-50g) Note Please note that as long as nothing else is written in the article description, all helmets that have a visor as standard will be delivered with a clear one, even if it is shown differently. ...

Replacement peak for AGV helmets. Suitable for AGV AX9 ...

Replacement peak for AGV helmets. Suitable for AGV AX9 ...

Replacement peak for AGV helmets. Suitable for AGV AX9 ...