Features An aerodynamic shell design constructed using advanced fiberglass reinforced plastic (FRP) for light weight & strength A quilted helmet liner & cheek pads made with hypo-allergenic & anti-microbial nylon & perforated leather combination Advanced Cone-Head® ultra light weight EPS protection system, allows helmets to be engineered lighter & fit closer to the head Universal 5 snap placement for accesory shields This helmet model meets or exceeds both ECE 22.05 & DOT FMVSS-218 motorcycle helmet safety standards 3 snap shield/visor compatible. Shield/visor not included with helmet Retention system is a race approved Double D-RING Provides ample ear cavity space for most speaker systems A clear coat finish to protect paint & graphics A XS size FX-78 weighs 1, 0kg or 2, 20 kg, a XL size FX-78 weighs 1, 1kg or 2, 42kg Note Please be aware, as long as nothing else is written in the item description: All helmets will be delivered only with the ECE certification by default all helmets that have a visor will be delivered with a clear visor, even if it is shown differently. ...

Features An aerodynamic shell design constructed using advanced fiberglass reinforced plastic (FRP) for light weight & strength A quilted helmet liner & cheek pads made with hypo-allergenic & anti-microbial nylon & perforated leather combination Advanced Cone-Head® ultra light weight EPS protection system, allows helmets to be engineered lighter & fit closer to the head Universal 5 snap placement for accesory shields This helmet model meets or exceeds both ECE 22.05 & DOT FMVSS-218 motorcycle helmet safety standards 3 snap shield/visor compatible. Shield/visor not included with helmet Retention system is a race approved Double D-RING Provides ample ear cavity space for most speaker systems A clear coat finish to protect paint & graphics A XS size FX-78 weighs 1, 0kg or 2, 20 kg, a XL size FX-78 weighs 1, 1kg or 2, 42kg Note Please be aware, as long as nothing else is written in the item description: All helmets will be delivered only with the ECE certification by default, even if it is shown differently. all helmets that have a visor will be delivered with a clear visor, even if it is shown differently. ...

Features An aerodynamic shell design constructed using an advanced lightweight composite poly-alloy A flush-fit, side-coverless face shield that is optically correct, compound-curved, scratch-resistant & protects against UV-rays Quick release shield ratchet system 7 points of ventilation with chin, side, forehead, top & rear vent. 5 intake vents & 2 exhaust vents This helmet model meets or exceeds ECE 22.05 motorcycle helmet safety standards Retention system is a race approved Double D-RING Provides ample ear cavity space for most speaker systems There are 2 tinted shields available for this model A clear coat finish to protect paint & graphics A large-size FX-90E weighs 1.30kg or 2.86 lbs Available

Size: XS-XXL liner & cheek pads are made with a hypoallergenic & anti-microbial nylon, most of which are removable & washable Note Please note that as long as nothing else is written in the article description, all helmets that have a visor as standard will be delivered with a clear one, even if it is shown differently.

...

Suitable for the AFX-90E & AFX-100 helmets. example picture ...

Suitable for the AFX-90E & AFX-100 helmets. *example picture ...

Helmet Technology Shell Design: An aerodynamic shell design constructed using an advanced lightweight composite poly-alloy Face Shield: A flush-fit, lock down, side-coverless face shield that is optically correct, compound-curved, scratch-resistant & protects against UV-rays Quick Release Ratchet: Quick release shield ratchet system with shield lock Ventilation: 8 points of ventilation with chin, side, forehead, top & rear vent. 2 intake vents & 6 exhaust vents This helmet model meets or exceeds both ECE 22.05 & DOT FMVSS-218 motorcycle helmet safety standards Retention system is a race approved Double D-RING Provides ample ear cavity space for most speaker systems A clear coat finish to protect paint & graphics A large-size FX-95 weighs 1.59kg or 3.5 lbs Removable, washable & custom sizable Interior AFX helmet liners & cheek pads are made with a hypoallergenic andanti-microbial nylon, most of which are removable &

Washable.

The size of this helmet is based on a combination of four factors: outer shell size, inner EPS thickness, comfort liner thickness & cheek pad thickness. The fit of the helmet can be customized by replacing your existing cheek pads with thinner cheek pads (for a looser fit) or thicker cheek pads (for a tighter fit). The fit can also be customized by replacing your existing comfort liner with a thinner comfort liner (for a looser fit) or thicker comfort liner (for a tighter fit). Please refer to the shell, liner & cheek pad compatibility chart below. Keep in mind these components can only be replaced inside the group of sizes contained in each size range block. Helmet Shell & EPS Size XS-M L-XXL XS S M L XL XXL Check Pad Thickness (mm) 28 24 20 28 24 20 Comfort Liner Thickness (mm) 16 10 6 16 10 6 Note Please note that as long as nothing else is written in the article description, all helmets that have a visor as standard will be delivered with a clear one, even if it is shown differently.



...

Helmet Technology Shell Design: An aerodynamic shell design constructed using an advanced lightweight composite poly-alloy Face Shield: A flush-fit, lock down, side-coverless face shield that is optically correct, compound-curved, scratch-resistant & protects against UV-rays Quick Release Ratchet: Quick release shield ratchet system with shield lock Ventilation: 8 points of ventilation with chin, side, forehead, top & rear vent. 2 intake vents & 6 exhaust vents This helmet model meets or exceeds both ECE 22.05 & DOT FMVSS-218 motorcycle helmet safety standards Retention system is a race approved Double D-RING Provides ample ear cavity space for most speaker systems A clear coat finish to protect paint & graphics A large-size FX-95 weighs 1.59kg or 3.5 lbs Removable, washable & custom sizable Interior AFX helmet liners & cheek pads are made with a hypoallergenic andanti-microbial nylon, most of which are removable &

Washable.

The size of this helmet is based on a combination of four factors: outer shell size, inner EPS thickness, comfort liner thickness & cheek pad thickness. The fit of the helmet can be customized by replacing your existing cheek pads with thinner cheek pads (for a looser fit) or thicker cheek pads (for a tighter fit). The fit can also be customized by replacing your existing comfort liner with a thinner comfort liner (for a looser fit) or thicker comfort liner (for a tighter fit). Please refer to the shell, liner & cheek pad compatibility chart below. Keep in mind these components can only be replaced inside the group of sizes contained in each size range block. Helmet Shell & EPS Size XS-M L-XXL XS S M L XL XXL Check Pad Thickness (mm) 28 24 20 28 24 20 Comfort Liner Thickness (mm) 16 10 6 16 10 6 Note Please be aware, as long as nothing else is written in the item description: All helmets will be delivered only with the ECE certification by default, even if it is shown differently. all helmets that have a visor will be delivered with a clear visor, even if it is shown differently.



...

Helmet Technology Shell Design: An aerodynamic shell design constructed using an advanced lightweight composite poly-alloy Face Shield: A flush-fit, lock down, side-coverless face shield that is optically correct, compound-curved, scratch-resistant & protects against UV-rays Quick Release Ratchet: Quick release shield ratchet system with shield lock Ventilation: 8 points of ventilation with chin, side, forehead, top & rear vent. 2 intake vents & 6 exhaust vents This helmet model meets or exceeds both ECE 22.05 & DOT FMVSS-218 motorcycle helmet safety standards Retention system is a race approved Double D-RING Provides ample ear cavity space for most speaker systems A clear coat finish to protect paint & graphics A large-size FX-95 weighs 1.59kg or 3.5 lbs Removable, washable & custom sizable Interior AFX helmet liners & cheek pads are made with a hypoallergenic andanti-microbial nylon, most of which are removable &

Washable.

The size of this helmet is based on a combination of four factors: outer shell size, inner EPS thickness, comfort liner thickness & cheek pad thickness. The fit of the helmet can be customized by replacing your existing cheek pads with thinner cheek pads (for a looser fit) or thicker cheek pads (for a tighter fit). The fit can also be customized by replacing your existing comfort liner with a thinner comfort liner (for a looser fit) or thicker comfort liner (for a tighter fit). Please refer to the shell, liner & cheek pad compatibility chart below. Keep in mind these components can only be replaced inside the group of sizes contained in each size range block. Helmet Shell & EPS Size XS-M L-XXL XS S M L XL XXL Check Pad Thickness (mm) 28 24 20 28 24 20 Comfort Liner Thickness (mm) 16 10 6 16 10 6 Note Please note that as long as nothing else is written in the article description, all helmets that have a visor as standard will be delivered with a clear one, even if it is shown differently.



...

Helmet Technology Shell Design: An aerodynamic shell design constructed using an advanced lightweight composite poly-alloy Face Shield: A flush-fit, lock down, side-coverless face shield that is optically correct, compound-curved, scratch-resistant & protects against UV-rays Quick Release Ratchet: Quick release shield ratchet system with shield lock Ventilation: 8 points of ventilation with chin, side, forehead, top & rear vent. 2 intake vents & 6 exhaust vents This helmet model meets or exceeds both ECE 22.05 & DOT FMVSS-218 motorcycle helmet safety standards Retention system is a race approved Double D-RING Provides ample ear cavity space for most speaker systems A clear coat finish to protect paint & graphics A large-size FX-95 weighs 1.59kg or 3.5 lbs Removable, washable & custom sizable Interior AFX helmet liners & cheek pads are made with a hypoallergenic andanti-microbial nylon, most of which are removable &

Washable.

The size of this helmet is based on a combination of four factors: outer shell size, inner EPS thickness, comfort liner thickness & cheek pad thickness. The fit of the helmet can be customized by replacing your existing cheek pads with thinner cheek pads (for a looser fit) or thicker cheek pads (for a tighter fit). The fit can also be customized by replacing your existing comfort liner with a thinner comfort liner (for a looser fit) or thicker comfort liner (for a tighter fit). Please refer to the shell, liner & cheek pad compatibility chart below. Keep in mind these components can only be replaced inside the group of sizes contained in each size range block. Helmet Shell & EPS Size XS-M L-XXL XS S M L XL XXL Check Pad Thickness (mm) 28 24 20 28 24 20 Comfort Liner Thickness (mm) 16 10 6 16 10 6 Note Please be aware, as long as nothing else is written in the item description: All helmets will be delivered only with the ECE certification by default all helmets that have a visor will be delivered with a clear visor, even if it is shown differently.



...

Features An aerodynamic shell design constructed using an advanced ultra light weight polly-alloy for light weight & strength A flush-fit, side-coverless face shield that is optically correct, compound-curved, scratch-resistant & Pinlock® 70 Prepared that protects against UV-rays Quick release shield ratchet system 10 points of ventilation with chin, forehead, top & rear vent. 4 intake vents & 6 exhaust vents This helmet model meets or exceeds both ECE 22.05 & DOT FMVSS-218 motorcycle helmet safety standards Retention system is a race approved Titanium Double D-RING Provides ample ear cavity space for most speaker systems A clear coat finish to protect paint & graphics A large-size FX-99 weighs 1, 37kg or 3.00 lbs Note Please note that as long as nothing else is written in the article description, all helmets that have a visor as standard will be delivered with a clear one, even if it is shown differently. ...